#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).

USE_STANDARD_AS_RULE := true

O_TARGET		:= sa1100.o

obj-y :=
obj-m :=
obj-n :=
obj-  :=

export-objs :=	assabet.o dma-sa1100.o dma-sa1111.o freebird.o generic.o \
		h3600.o huw_webpanel.o irq.o pcipool.o sa1111-pcibuf.o   \
		yopy.o

# These aren't present yet, and prevents a plain -ac kernel building.
# hwtimer.o usb_ctl.o usb_recv.o usb_send.o

# Common support (must be linked before board specific support)
obj-y += generic.o irq.o dma-sa1100.o

# This needs to be cleaned up.  We probably need to have SA1100
# and SA1110 config symbols.
#
# We link the CPU support next, so that RAM timings can be tuned.
ifeq ($(CONFIG_CPU_FREQ),y)
obj-$(CONFIG_SA1100_ASSABET) += cpu-sa1110.o
obj-$(CONFIG_SA1100_CERF) += cpu-sa1110.o
obj-$(CONFIG_SA1100_LART) += cpu-sa1100.o
endif

# Next, the SA1111 stuff.
obj-$(CONFIG_SA1111) += sa1111.o dma-sa1111.o
obj-$(CONFIG_USB_OHCI_SA1111) += sa1111-pcibuf.o pcipool.o

# Specific board support
obj-$(CONFIG_SA1100_ADSBITSY) += adsbitsy.o
obj-$(CONFIG_SA1100_ASSABET) += assabet.o
obj-$(CONFIG_ASSABET_NEPONSET) += neponset.o
obj-$(CONFIG_SA1100_BRUTUS) += brutus.o
obj-$(CONFIG_SA1100_CERF) += cerf.o
obj-$(CONFIG_SA1100_EMPEG) += empeg.o
obj-$(CONFIG_SA1100_FLEXANET) += flexanet.o
obj-$(CONFIG_SA1100_FREEBIRD) += freebird.o
obj-$(CONFIG_SA1100_GRAPHICSCLIENT) += graphicsclient.o
obj-$(CONFIG_SA1100_GRAPHICSMASTER) += graphicsmaster.o
obj-$(CONFIG_SA1100_H3600) += h3600.o
obj-$(CONFIG_SA1100_HUW_WEBPANEL) += huw_webpanel.o
obj-$(CONFIG_SA1100_ITSY) += itsy.o
obj-$(CONFIG_SA1100_JORNADA720) += jornada720.o
obj-$(CONFIG_SA1100_LART) += lart.o
obj-$(CONFIG_SA1100_NANOENGINE) += nanoengine.o
obj-$(CONFIG_SA1100_OMNIMETER) += omnimeter.o
obj-$(CONFIG_SA1100_PANGOLIN) += pangolin.o
obj-$(CONFIG_SA1100_PFS168) += pfs168.o
obj-$(CONFIG_SA1100_PLEB) += pleb.o
obj-$(CONFIG_SA1100_SHERMAN) += sherman.o
obj-$(CONFIG_SA1100_SIMPAD) += simpad.o
obj-$(CONFIG_SA1100_VICTOR) += victor.o
obj-$(CONFIG_SA1100_XP860) += xp860.o
obj-$(CONFIG_SA1100_YOPY) += yopy.o

# LEDs support
leds-y := leds.o
leds-$(CONFIG_SA1100_ADSBITSY) += leds-adsbitsy.o
leds-$(CONFIG_SA1100_ASSABET) += leds-assabet.o
leds-$(CONFIG_SA1100_BRUTUS) += leds-brutus.o
leds-$(CONFIG_SA1100_CERF) += leds-cerf.o
leds-$(CONFIG_SA1100_FLEXANET) += leds-flexanet.o
leds-$(CONFIG_SA1100_GRAPHICSCLIENT) += leds-graphicsclient.o
leds-$(CONFIG_SA1100_GRAPHICSMASTER) += leds-graphicsmaster.o
leds-$(CONFIG_SA1100_LART) += leds-lart.o
leds-$(CONFIG_SA1100_PFS168) += leds-pfs168.o
leds-$(CONFIG_SA1100_SIMPAD) += leds-simpad.o  
obj-$(CONFIG_LEDS) += $(leds-y)

# Miscelaneous functions
obj-$(CONFIG_PM) += pm.o sleep.o

include $(TOPDIR)/Rules.make