#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#
mainmenu_name "Linux Kernel Configuration"

define_bool CONFIG_ARM y
define_bool CONFIG_EISA n
define_bool CONFIG_SBUS n
define_bool CONFIG_MCA n
define_bool CONFIG_UID16 y
define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y
define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
define_bool CONFIG_GENERIC_BUST_SPINLOCK n
define_bool CONFIG_GENERIC_ISA_DMA n

mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
bool 'Prompt for obsolete code/drivers' CONFIG_OBSOLETE
endmenu


mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
dep_bool '  Set version information on all module symbols' CONFIG_MODVERSIONS $CONFIG_MODULES
dep_bool '  Kernel module loader' CONFIG_KMOD $CONFIG_MODULES
endmenu


mainmenu_option next_comment
comment 'System Type'

choice 'ARM system type' \
	"Anakin			CONFIG_ARCH_ANAKIN \
	 Archimedes/A5000	CONFIG_ARCH_ARCA5K \
	 Cirrus-CL-PS7500FE     CONFIG_ARCH_CLPS7500 \
 	 CLPS711x/EP721x-based	CONFIG_ARCH_CLPS711X \
	 Co-EBSA285		CONFIG_ARCH_CO285 \
	 EBSA-110		CONFIG_ARCH_EBSA110 \
 	 Epxa10db               CONFIG_ARCH_CAMELOT \
	 FootBridge		CONFIG_ARCH_FOOTBRIDGE \
	 Integrator		CONFIG_ARCH_INTEGRATOR \
	 LinkUp-L7200		CONFIG_ARCH_L7200 \
	 RiscPC			CONFIG_ARCH_RPC \
 	 SA1100-based		CONFIG_ARCH_SA1100 \
	 Shark			CONFIG_ARCH_SHARK" RiscPC

mainmenu_option next_comment
comment 'Archimedes/A5000 Implementations'
# These architectures will be combined.  However, until this
# is complete...  Note that the ARC will take precedence over
# A5K
comment 'Archimedes/A5000 Implementations (select only ONE)'
dep_bool '  Archimedes' CONFIG_ARCH_ARC $CONFIG_ARCH_ARCA5K
dep_bool '  A5000' CONFIG_ARCH_A5K $CONFIG_ARCH_ARCA5K
endmenu

mainmenu_option next_comment
comment 'Footbridge Implementations'
dep_bool '  CATS' CONFIG_ARCH_CATS $CONFIG_ARCH_FOOTBRIDGE
dep_bool '  Compaq Personal Server' CONFIG_ARCH_PERSONAL_SERVER $CONFIG_ARCH_FOOTBRIDGE
dep_bool '  EBSA285 (addin mode)' CONFIG_ARCH_EBSA285_ADDIN $CONFIG_ARCH_FOOTBRIDGE
dep_bool '  EBSA285 (host mode)' CONFIG_ARCH_EBSA285_HOST $CONFIG_ARCH_FOOTBRIDGE
dep_bool '  NetWinder' CONFIG_ARCH_NETWINDER $CONFIG_ARCH_FOOTBRIDGE
endmenu

mainmenu_option next_comment
comment 'SA11x0 Implementations'
dep_bool '  Assabet' CONFIG_SA1100_ASSABET $CONFIG_ARCH_SA1100
dep_bool '    Include support for Neponset' CONFIG_ASSABET_NEPONSET $CONFIG_SA1100_ASSABET
dep_bool '  ADS Bitsy' CONFIG_SA1100_ADSBITSY $CONFIG_ARCH_SA1100
dep_bool '  Brutus' CONFIG_SA1100_BRUTUS $CONFIG_ARCH_SA1100
dep_bool '  CerfBoard' CONFIG_SA1100_CERF $CONFIG_ARCH_SA1100
if [ "$CONFIG_SA1100_CERF" = "y" ]; then
   choice 'Cerf RAM available' \
        "8MB   CONFIG_SA1100_CERF_8MB \
         16MB   CONFIG_SA1100_CERF_16MB \
         32MB   CONFIG_SA1100_CERF_32MB \
         64MB   CONFIG_SA1100_CERF_64MB" CerfRam
   choice 'Cerf Flash available'  \
        "8MB    CONFIG_SA1100_CERF_FLASH_8MB \
         16MB   CONFIG_SA1100_CERF_FLASH_16MB \
         32MB   CONFIG_SA1100_CERF_FLASH_32MB" CerfFlash
   bool 'Cerf w/CPLD support (CerfPDA)' CONFIG_SA1100_CERF_CPLD
fi
dep_bool '  Compaq iPAQ H3600' CONFIG_SA1100_H3600 $CONFIG_ARCH_SA1100
#dep_bool '  Empeg' CONFIG_SA1100_EMPEG $CONFIG_ARCH_SA1100
dep_bool '  Extenex HandHeld Theater (Squashtail)' CONFIG_SA1100_EXTENEX1 $CONFIG_ARCH_SA1100
if [ "$CONFIG_SA1100_EXTENEX1" = "y" ]; then
   bool '    Support 16 MB of DRAM (not just 8)' CONFIG_SA1100_EXTENEX1_16MB
fi
dep_bool '  FlexaNet' CONFIG_SA1100_FLEXANET $CONFIG_ARCH_SA1100
dep_bool '  FreeBird-v1.1' CONFIG_SA1100_FREEBIRD $CONFIG_ARCH_SA1100
dep_bool '  GraphicsClient Plus' CONFIG_SA1100_GRAPHICSCLIENT $CONFIG_ARCH_SA1100
dep_bool '  GraphicsMaster' CONFIG_SA1100_GRAPHICSMASTER $CONFIG_ARCH_SA1100
dep_bool '  HP Jornada 720' CONFIG_SA1100_JORNADA720 $CONFIG_ARCH_SA1100
dep_bool '  HuW WebPanel' CONFIG_SA1100_HUW_WEBPANEL $CONFIG_ARCH_SA1100
dep_bool '  Itsy' CONFIG_SA1100_ITSY $CONFIG_ARCH_SA1100
dep_bool '  LART' CONFIG_SA1100_LART $CONFIG_ARCH_SA1100
dep_bool '  nanoEngine' CONFIG_SA1100_NANOENGINE $CONFIG_ARCH_SA1100
dep_bool '  OmniMeter' CONFIG_SA1100_OMNIMETER $CONFIG_ARCH_SA1100
dep_bool '  Pangolin' CONFIG_SA1100_PANGOLIN $CONFIG_ARCH_SA1100
dep_bool '  PLEB' CONFIG_SA1100_PLEB $CONFIG_ARCH_SA1100
dep_bool '  Sherman' CONFIG_SA1100_SHERMAN $CONFIG_ARCH_SA1100
dep_bool '  Simpad' CONFIG_SA1100_SIMPAD $CONFIG_ARCH_SA1100
dep_bool '  Tulsa' CONFIG_SA1100_PFS168 $CONFIG_ARCH_SA1100
dep_bool '  Victor' CONFIG_SA1100_VICTOR $CONFIG_ARCH_SA1100
dep_bool '  XP860' CONFIG_SA1100_XP860 $CONFIG_ARCH_SA1100
dep_bool '  Yopy' CONFIG_SA1100_YOPY $CONFIG_ARCH_SA1100

# Determine if SA1111 support is required
if [ "$CONFIG_ASSABET_NEPONSET" = "y" -o \
     "$CONFIG_SA1100_JORNADA720" = "y" -o \
     "$CONFIG_SA1100_PFS168" = "y" -o \
     "$CONFIG_SA1100_XP860" = "y" -o \
     "$CONFIG_SA1100_GRAPHICSMASTER" = "y" -o \
     "$CONFIG_SA1100_ADSBITSY" = "y" ]; then
   define_bool CONFIG_SA1111 y
   define_int CONFIG_FORCE_MAX_ZONEORDER 9
fi
endmenu

mainmenu_option next_comment
comment 'CLPS711X/EP721X Implementations'
dep_bool '  CDB89712' CONFIG_ARCH_CDB89712 $CONFIG_ARCH_CLPS711X
dep_bool '  CLEP7312' CONFIG_ARCH_CLEP7312 $CONFIG_ARCH_CLPS711X
dep_bool '  EDB7211' CONFIG_ARCH_EDB7211 $CONFIG_ARCH_CLPS711X
dep_bool '  P720T' CONFIG_ARCH_P720T $CONFIG_ARCH_CLPS711X

# XXX Maybe these should indicate register compatibility
# instead of being mutually exclusive.
if [ "$CONFIG_ARCH_EDB7211" = "y" ]; then
   define_bool CONFIG_ARCH_EP7211 y
else
   define_bool CONFIG_ARCH_EP7211 n
fi
if [ "$CONFIG_ARCH_P720T" = "y" ]; then
   define_bool CONFIG_ARCH_EP7212 y
else
   define_bool CONFIG_ARCH_EP7212 n
fi

if [ "$CONFIG_ARCH_EP7211" = "y" -o \
     "$CONFIG_ARCH_EP7212" = "y" ]; then
   bool '  EP72xx ROM boot' CONFIG_EP72XX_ROM_BOOT
fi
endmenu

# Definitions to make life easier
if [ "$CONFIG_ARCH_ARCA5K" = "y" -o \
     "$CONFIG_ARCH_RPC" = "y" ]; then
   define_bool CONFIG_ARCH_ACORN y
else
   define_bool CONFIG_ARCH_ACORN n
fi

# see Documentation/arm/ConfigVars for a description of these
if [ "$CONFIG_ARCH_CO285" = "y" -o \
     "$CONFIG_ARCH_FOOTBRIDGE" = "y" ]; then
   define_bool CONFIG_FOOTBRIDGE y
else
   define_bool CONFIG_FOOTBRIDGE n
fi
if [ "$CONFIG_ARCH_CATS" = "y" -o \
     "$CONFIG_ARCH_EBSA285_HOST" = "y" -o \
     "$CONFIG_ARCH_NETWINDER" = "y" -o \
     "$CONFIG_ARCH_PERSONAL_SERVER" = "y" ]; then
   define_bool CONFIG_FOOTBRIDGE_HOST y
else
   define_bool CONFIG_FOOTBRIDGE_HOST n
fi
if [ "$CONFIG_ARCH_CO285" = "y" -o \
     "$CONFIG_ARCH_EBSA285_ADDIN" = "y" ]; then
   define_bool CONFIG_FOOTBRIDGE_ADDIN y
else
   define_bool CONFIG_FOOTBRIDGE_ADDIN n
fi
if [ "$CONFIG_ARCH_EBSA285_HOST" = "y" -o \
     "$CONFIG_ARCH_EBSA285_ADDIN" = "y" ]; then
   define_bool CONFIG_ARCH_EBSA285 y
fi

# Figure out whether this system uses 26-bit or 32-bit CPUs.
if [ "$CONFIG_ARCH_ARCA5K" = "y" ]; then
   define_bool CONFIG_CPU_32 n
   define_bool CONFIG_CPU_26 y
   bool '2MB physical memory' CONFIG_PAGESIZE_16
else
   define_bool CONFIG_CPU_32 y
   define_bool CONFIG_CPU_26 n
fi

comment 'Processor Type'

# Firstly, figure out what processor architecture version we should be using.
if [ "$CONFIG_ARCH_RPC"        = "y" -o "$CONFIG_ARCH_CLPS7500" = "y" ]; then
   define_bool CONFIG_CPU_32v3 y
else
   define_bool CONFIG_CPU_32v3 n
fi
if [ "$CONFIG_ARCH_EBSA110"    = "y" -o "$CONFIG_FOOTBRIDGE"    = "y" -o \
     "$CONFIG_ARCH_TBOX"       = "y" -o "$CONFIG_ARCH_SHARK"    = "y" -o \
     "$CONFIG_ARCH_NEXUSPCI"   = "y" -o "$CONFIG_ARCH_CLPS711X" = "y" -o \
     "$CONFIG_ARCH_INTEGRATOR" = "y" -o "$CONFIG_ARCH_SA1100"   = "y" -o \
     "$CONFIG_ARCH_L7200"      = "y" -o "$CONFIG_ARCH_ANAKIN"	= "y" -o \
     "$CONFIG_ARCH_CAMELOT"    = "y" ]; then
   define_bool CONFIG_CPU_32v4 y
else
   define_bool CONFIG_CPU_32v4 n
fi

# Select CPU types depending on the architecture selected.
# We use this to select which CPUs are supported, and to select
# the compiler tuning options.

# ARM610
if [ "$CONFIG_ARCH_RPC" = "y" ]; then
   bool 'Support ARM610 processor' CONFIG_CPU_ARM610
else
   define_bool CONFIG_CPU_ARM610 n
fi

# ARM710
if [ "$CONFIG_ARCH_CLPS7500" = "y" ]; then
   define_bool CONFIG_CPU_ARM710 y
else
   if [ "$CONFIG_ARCH_RPC" = "y" ]; then
      bool 'Support ARM710 processor' CONFIG_CPU_ARM710
   else
      define_bool CONFIG_CPU_ARM710 n
   fi
fi

# ARM720T
if [ "$CONFIG_ARCH_CLPS711X" = "y" -o \
     "$CONFIG_ARCH_L7200"    = "y" -o \
     "$CONFIG_ARCH_CDB89712" = "y" ]; then
   define_bool CONFIG_CPU_ARM720T y
else
   if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
      bool 'Support ARM720T processor' CONFIG_CPU_ARM720T
   else
      define_bool CONFIG_CPU_ARM720T n
   fi
fi

# ARM920T
if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
   bool 'Support ARM920T processor' CONFIG_CPU_ARM920T
else
   define_bool CONFIG_CPU_ARM920T n
fi
if [ "$CONFIG_CPU_ARM920T" = "y" ]; then
   bool '  ARM920T CPU idle' CONFIG_CPU_ARM920_CPU_IDLE
   bool '  ARM920T I-Cache on' CONFIG_CPU_ARM920_I_CACHE_ON
   bool '  ARM920T D-Cache on' CONFIG_CPU_ARM920_D_CACHE_ON
   if [ "$CONFIG_CPU_ARM920_D_CACHE_ON" = "y" ] ; then
      bool '  Force write through caches on ARM920T' CONFIG_CPU_ARM920_WRITETHROUGH
   fi
fi

# ARM926T
if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
   bool 'Support ARM926T processor' CONFIG_CPU_ARM926T
else
   define_bool CONFIG_CPU_ARM926T n
fi
if [ "$CONFIG_CPU_ARM926T" = "y" ]; then
   bool '  ARM926T CPU idle' CONFIG_CPU_ARM926_CPU_IDLE
   bool '  ARM926T I-Cache on' CONFIG_CPU_ARM926_I_CACHE_ON
   bool '  ARM926T D-Cache on' CONFIG_CPU_ARM926_D_CACHE_ON
   if [ "$CONFIG_CPU_ARM926_D_CACHE_ON" = "y" ] ; then
      bool '  Force write through caches on ARM926T' CONFIG_CPU_ARM926_WRITETHROUGH
   fi
   if [ "$CONFIG_CPU_ARM926_I_CACHE_ON" = "y" -o \
        "$CONFIG_CPU_ARM926_D_CACHE_ON" = "y" ]; then
      bool '  Round robin I and D cache replacement algorithm' CONFIG_CPU_ARM926_ROUND_ROBIN
   fi
fi

# ARM1020
if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
   bool 'Support ARM1020 processor' CONFIG_CPU_ARM1020
else
    define_bool CONFIG_CPU_ARM1020 n
fi
if [ "$CONFIG_CPU_ARM1020" = "y" ]; then
   bool '  ARM1020 I-Cache on' CONFIG_CPU_ARM1020_I_CACHE_ON
   bool '  ARM10 D-Cache on' CONFIG_CPU_ARM1020_D_CACHE_ON
   if [ "$CONFIG_CPU_ARM1020_D_CACHE_ON" = "y" ] ; then
      bool '  Force write through caches on ARM1020' CONFIG_CPU_ARM1020_FORCE_WRITE_THROUGH
   fi
   if [ "$CONFIG_CPU_ARM1020_I_CACHE_ON" = "y" -o \
        "$CONFIG_CPU_ARM1020_D_CACHE_ON" = "y" ]; then
      bool '  Round robin I and D cache replacement algorithm' CONFIG_CPU_ARM1020_ROUND_ROBIN
   fi
fi

# SA110
if [ "$CONFIG_ARCH_EBSA110"  = "y" -o "$CONFIG_FOOTBRIDGE" = "y" -o \
     "$CONFIG_ARCH_TBOX"     = "y" -o "$CONFIG_ARCH_SHARK" = "y" -o \
     "$CONFIG_ARCH_NEXUSPCI" = "y" -o "$CONFIG_ARCH_ANAKIN" = "y" ]; then
   define_bool CONFIG_CPU_SA110 y
else
   if [ "$CONFIG_ARCH_RPC" = "y" ]; then
      bool 'Support StrongARM(R) SA-110 processor' CONFIG_CPU_SA110
   else
      define_bool CONFIG_CPU_SA110 n
   fi
fi

# SA1100
if [ "$CONFIG_ARCH_SA1100" = "y" ]; then
   define_bool CONFIG_CPU_SA1100 y
else
   define_bool CONFIG_CPU_SA1100 n
fi

if [ "$CONFIG_CPU_32" = "y" ]; then
   dep_bool 'Support Thumb instructions (experimental)' CONFIG_ARM_THUMB $CONFIG_EXPERIMENTAL
fi

# Select various configuration options depending on the machine type
if [ "$CONFIG_ARCH_EDB7211" = "y" -o \
     "$CONFIG_ARCH_SA1100" = "y" ]; then
   define_bool CONFIG_DISCONTIGMEM y
else
   define_bool CONFIG_DISCONTIGMEM n
fi

endmenu

mainmenu_option next_comment
comment 'General setup'

# Now handle the bus types
if [ "$CONFIG_ARCH_FTVPCI" = "y" -o \
     "$CONFIG_ARCH_SHARK" = "y" -o \
     "$CONFIG_FOOTBRIDGE_HOST" = "y" ]; then
   define_bool CONFIG_PCI y
else
   if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
      bool 'PCI support' CONFIG_PCI_INTEGRATOR
      define_bool CONFIG_PCI $CONFIG_PCI_INTEGRATOR
   else
      define_bool CONFIG_PCI n
   fi
fi

if [ "$CONFIG_FOOTBRIDGE_HOST" = "y" -o \
     "$CONFIG_ARCH_SHARK" = "y" -o \
     "$CONFIG_ARCH_CLPS7500" = "y" -o \
     "$CONFIG_ARCH_EBSA110" = "y" -o \
     "$CONFIG_ARCH_CDB89712" = "y" -o \
     "$CONFIG_ARCH_EDB7211" = "y" -o \
     "$CONFIG_ARCH_SA1100" = "y" ]; then
   define_bool CONFIG_ISA y
else
   define_bool CONFIG_ISA n
fi

if [ "$CONFIG_FOOTBRIDGE_HOST" = "y" -o \
     "$CONFIG_ARCH_SHARK" = "y" ]; then
   define_bool CONFIG_ISA_DMA y
else
   define_bool CONFIG_ISA_DMA n
fi

if [ "$CONFIG_ARCH_SA1100" = "y" -o \
     "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
   dep_bool 'Support CPU clock change (EXPERIMENTAL)' CONFIG_CPU_FREQ $CONFIG_EXPERIMENTAL
fi

source drivers/pci/Config.in
bool 'Support hot-pluggable devices' CONFIG_HOTPLUG
if [ "$CONFIG_HOTPLUG" = "y" ]; then
   source drivers/pcmcia/Config.in
else
   define_bool CONFIG_PCMCIA n
fi
bool 'Networking support' CONFIG_NET
bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL
comment 'At least one math emulation must be selected'
tristate 'NWFPE math emulation' CONFIG_FPE_NWFPE
dep_tristate 'FastFPE math emulation (experimental)' CONFIG_FPE_FASTFPE $CONFIG_EXPERIMENTAL
choice 'Kernel core (/proc/kcore) format' \
	"ELF		CONFIG_KCORE_ELF	\
	 A.OUT		CONFIG_KCORE_AOUT" ELF
tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
dep_bool 'Power Management support (experimental)' CONFIG_PM $CONFIG_EXPERIMENTAL
dep_tristate 'RISC OS personality' CONFIG_ARTHUR $CONFIG_CPU_32

if [ "$CONFIG_ARCH_EBSA110" = "y" -o         \
     "$CONFIG_ARCH_SA1100" = "y" -o          \
     "$CONFIG_ARCH_CLPS7500" = "y" -o        \
     "$CONFIG_ARCH_PERSONAL_SERVER" = "y" -o \
     "$CONFIG_ARCH_CATS" = "y" -o            \
     "$CONFIG_ARCH_P720T" = "y" -o	     \
     "$CONFIG_ARCH_CDB89712" = "y" -o	     \
     "$CONFIG_ARCH_CAMELOT" = "y" -o	     \
     "$CONFIG_ARCH_ANAKIN" = "y" ]; then
   string 'Default kernel command string' CONFIG_CMDLINE ""
fi
if [ "$CONFIG_ARCH_NETWINDER" = "y" -o  \
     "$CONFIG_ARCH_EBSA110" = "y" -o    \
     "$CONFIG_ARCH_EBSA285" = "y" -o    \
     "$CONFIG_ARCH_FTVPCI" = "y" -o     \
     "$CONFIG_ARCH_SHARK" = "y" -o      \
     "$CONFIG_ARCH_CO285" = "y" -o      \
     "$CONFIG_ARCH_SA1100" = "y" -o     \
     "$CONFIG_ARCH_INTEGRATOR" = "y" -o \
     "$CONFIG_ARCH_CDB89712" = "y" -o   \
     "$CONFIG_ARCH_P720T" = "y" ]; then
   bool 'Timer and CPU usage LEDs' CONFIG_LEDS
   if [ "$CONFIG_LEDS" = "y" ]; then
      if [ "$CONFIG_ARCH_NETWINDER" = "y" -o  \
	   "$CONFIG_ARCH_EBSA285" = "y" -o    \
	   "$CONFIG_ARCH_SHARK" = "y" -o      \
	   "$CONFIG_ARCH_CO285" = "y" -o      \
	   "$CONFIG_ARCH_SA1100" = "y" -o     \
           "$CONFIG_ARCH_INTEGRATOR" = "y" -o \
	   "$CONFIG_ARCH_P720T" = "y" ]; then
         bool '  Timer LED' CONFIG_LEDS_TIMER
         bool '  CPU usage LED' CONFIG_LEDS_CPU
      fi
   fi
   if [ "$CONFIG_ARCH_EBSA110" = "y" ]; then
      define_bool CONFIG_LEDS_TIMER y
   fi
fi
if [ "$CONFIG_CPU_32" = "y" -a "$CONFIG_ARCH_EBSA110" != "y" ]; then
   bool 'Kernel-mode alignment trap handler' CONFIG_ALIGNMENT_TRAP
fi
endmenu

source drivers/parport/Config.in

if [ "$CONFIG_ALIGNMENT_TRAP" = "y" ]; then
  source drivers/mtd/Config.in
fi

source drivers/pnp/Config.in
source drivers/block/Config.in
source drivers/md/Config.in

if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
   source drivers/acorn/block/Config.in
fi

if [ "$CONFIG_NET" = "y" ]; then
   source net/Config.in

   mainmenu_option next_comment
   comment 'Network device support'

   bool 'Network device support?' CONFIG_NETDEVICES
   if [ "$CONFIG_NETDEVICES" = "y" ]; then
      source drivers/net/Config.in
   fi
   endmenu

   source net/ax25/Config.in

   source net/irda/Config.in
fi

mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support'

tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE

if [ "$CONFIG_IDE" != "n" ]; then
  source drivers/ide/Config.in
else
  define_bool CONFIG_BLK_DEV_IDE_MODES n
  define_bool CONFIG_BLK_DEV_HD n
fi
endmenu

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support?' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then
   source drivers/scsi/Config.in
fi
endmenu

if [ "$CONFIG_ARCH_CLPS711X" = "y" ]; then
   source drivers/ssi/Config.in
fi

source drivers/ieee1394/Config.in

source drivers/message/i2o/Config.in

mainmenu_option next_comment
comment 'ISDN subsystem'

tristate 'ISDN support' CONFIG_ISDN
if [ "$CONFIG_ISDN" != "n" ]; then
   source drivers/isdn/Config.in
fi
endmenu

#
# input before char - char/joystick depends on it. As does USB.
#
source drivers/input/Config.in

source drivers/char/Config.in
if [ "$CONFIG_ARCH_ACORN" = "y" -a \
     "$CONFIG_BUSMOUSE" = "y" ]; then
   if [ "$CONFIG_ARCH_RPC" != "y" ]; then
      define_bool CONFIG_KBDMOUSE y
   else
      define_bool CONFIG_RPCMOUSE y
   fi
fi

source drivers/media/Config.in

source fs/Config.in

if [ "$CONFIG_VT" = "y" ]; then
   mainmenu_option next_comment
   comment 'Console drivers'
   # Select the keyboard type for this architecture.
   if [ "$CONFIG_FOOTBRIDGE_HOST" = "y" -o \
        "$CONFIG_ARCH_CLPS7500" = "y" -o   \
        "$CONFIG_ARCH_SHARK" = "y" ]; then
      define_bool CONFIG_PC_KEYB y
   fi
   if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
      define_bool CONFIG_KMI_KEYB y
      define_bool CONFIG_KMI_MOUSE y
   fi
   if [ "$CONFIG_ARCH_L7200" = "y" ]; then
      define_bool CONFIG_L7200_KEYB y
   fi

   # Do we use the PC-type keyboard map?
   if [ "$CONFIG_FOOTBRIDGE_HOST" = "y" -o \
        "$CONFIG_ARCH_SHARK" = "y" -o      \
        "$CONFIG_ARCH_SA1100" = "y" -o     \
        "$CONFIG_ARCH_INTEGRATOR" = "y" -o \
        "$CONFIG_ARCH_TBOX" = "y" -o       \
        "$CONFIG_ARCH_CLPS7500" = "y" -o   \
        "$CONFIG_ARCH_P720T" = "y" -o      \
        "$CONFIG_ARCH_ANAKIN" = "y" ]; then
      define_bool CONFIG_PC_KEYMAP y
   fi
   if [ "$CONFIG_ARCH_ACORN" != "y" -a "$CONFIG_ARCH_EBSA110" != "y" ]; then
      bool 'VGA text console' CONFIG_VGA_CONSOLE
   fi
   source drivers/video/Config.in
   endmenu
fi

if [ "$CONFIG_ARCH_ACORN" = "y" -o \
     "$CONFIG_ARCH_CLPS7500" = "y" -o \
     "$CONFIG_ARCH_TBOX" = "y" -o \
     "$CONFIG_ARCH_SHARK" = "y" -o \
     "$CONFIG_ARCH_SA1100" = "y" -o \
     "$CONFIG_PCI" = "y" ]; then
   mainmenu_option next_comment
   comment 'Sound'

   tristate 'Sound support' CONFIG_SOUND
   if [ "$CONFIG_SOUND" != "n" ]; then
      source drivers/sound/Config.in
   fi
   endmenu
fi

source drivers/misc/Config.in

source drivers/usb/Config.in

if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   source net/bluetooth/Config.in
fi

mainmenu_option next_comment
comment 'Kernel hacking'

# Always compile kernel with framepointer (until 2.4 real comes out)
# Bug reports aren't much use without this.
bool 'Compile kernel without frame pointer' CONFIG_NO_FRAME_POINTER
bool 'Verbose kernel error messages' CONFIG_DEBUG_ERRORS
bool 'Verbose user fault messages' CONFIG_DEBUG_USER
bool 'Include debugging information in kernel binary' CONFIG_DEBUG_INFO
bool 'Debug memory allocations' CONFIG_DEBUG_SLAB
bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
bool 'Spinlock debugging' CONFIG_DEBUG_SPINLOCK
dep_bool 'Disable pgtable cache' CONFIG_NO_PGT_CACHE $CONFIG_CPU_26
# These options are only for real kernel hackers who want to get their hands dirty. 
dep_bool 'Kernel low-level debugging functions' CONFIG_DEBUG_LL $CONFIG_EXPERIMENTAL
dep_bool '  Kernel low-level debugging messages via footbridge serial port' CONFIG_DEBUG_DC21285_PORT $CONFIG_DEBUG_LL $CONFIG_FOOTBRIDGE
dep_bool '  kernel low-level debugging messages via UART2' CONFIG_DEBUG_CLPS711X_UART2 $CONFIG_DEBUG_LL $CONFIG_ARCH_CLPS711X
endmenu