From: Greg KH <greg@kroah.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-usb-devel@lists.sourceforge.net
Subject: [PATCH 13 of 15] USB Serial pl2303 driver added

This patch adds the pl2303 driver.


diff -Nru a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
--- /dev/null	Wed Dec 31 16:00:00 1969
+++ b/drivers/usb/serial/pl2303.c	Thu Jan  3 21:41:54 2002
@@ -0,0 +1,825 @@
+/*
+ * Prolific PL2303 USB to serial adaptor driver
+ *
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * Original driver for 2.2.x by anonymous
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ * See Documentation/usb/usb-serial.txt for more information on using this driver
+ *
+ * 2001_Oct_06 gkh
+ *	Added RTS and DTR line control.  Thanks to joe@bndlg.de for parts of it.
+ *
+ * 2001_Sep_19 gkh
+ *	Added break support.
+ *
+ * 2001_Aug_30 gkh
+ *	fixed oops in write_bulk_callback.
+ *
+ * 2001_Aug_28 gkh
+ *	reworked buffer logic to be like other usb-serial drivers.  Hopefully
+ *	removing some reported problems.
+ *
+ * 2001_Jun_06 gkh
+ *	finished porting to 2.4 format.
+ * 
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/fcntl.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+
+#ifdef CONFIG_USB_SERIAL_DEBUG
+	static int debug = 1;
+#else
+	static int debug;
+#endif
+
+#include "usb-serial.h"
+#include "pl2303.h"
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v0.9"
+#define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver"
+
+
+#define SET_LINE_REQUEST_TYPE		0x21
+#define SET_LINE_REQUEST		0x20
+
+#define SET_CONTROL_REQUEST_TYPE	0x21
+#define SET_CONTROL_REQUEST		0x22
+#define CONTROL_DTR			0x01
+#define CONTROL_RTS			0x02
+
+#define BREAK_REQUEST_TYPE		0x21
+#define BREAK_REQUEST			0x23	
+#define BREAK_ON			0xffff
+#define BREAK_OFF			0x0000
+
+#define GET_LINE_REQUEST_TYPE		0xa1
+#define GET_LINE_REQUEST		0x21
+
+#define VENDOR_WRITE_REQUEST_TYPE	0x40
+#define VENDOR_WRITE_REQUEST		0x01
+
+#define VENDOR_READ_REQUEST_TYPE	0xc0
+#define VENDOR_READ_REQUEST		0x01
+
+/* function prototypes for a PL2303 serial converter */
+static int pl2303_open (struct usb_serial_port *port, struct file *filp);
+static void pl2303_close (struct usb_serial_port *port, struct file *filp);
+static void pl2303_set_termios (struct usb_serial_port *port,
+				struct termios *old);
+static int pl2303_ioctl (struct usb_serial_port *port, struct file *file,
+			 unsigned int cmd, unsigned long arg);
+static void pl2303_read_int_callback (struct urb *urb);
+static void pl2303_read_bulk_callback (struct urb *urb);
+static void pl2303_write_bulk_callback (struct urb *urb);
+static int pl2303_write (struct usb_serial_port *port, int from_user,
+			 const unsigned char *buf, int count);
+static void pl2303_break_ctl(struct usb_serial_port *port,int break_state);
+static int pl2303_startup (struct usb_serial *serial);
+static void pl2303_shutdown (struct usb_serial *serial);
+
+
+static u16 pl2303_vendor_id	= PL2303_VENDOR_ID;
+static u16 pl2303_product_id	= PL2303_PRODUCT_ID;
+static u16 rsaq2_product_id	= PL2303_PRODUCT_ID_RSAQ2;
+static u16 iodata_vendor_id	= IODATA_VENDOR_ID;
+static u16 iodata_product_id	= IODATA_PRODUCT_ID;
+static u16 aten_vendor_id	= ATEN_VENDOR_ID;
+static u16 aten_product_id	= ATEN_PRODUCT_ID;
+
+/* All of the device info needed for the PL2303 SIO serial converters */
+static struct usb_serial_device_type pl2303_device = {
+	name:			"PL-2303",
+	idVendor:		&pl2303_vendor_id,
+	idProduct:		&pl2303_product_id,
+	needs_interrupt_in:	DONT_CARE,		/* this device must have an interrupt in endpoint */
+	needs_bulk_in:		MUST_HAVE,		/* this device must have a bulk in endpoint */
+	needs_bulk_out:		MUST_HAVE,		/* this device must have a bulk out endpoint */
+	num_interrupt_in:	NUM_DONT_CARE,
+	num_bulk_in:		1,
+	num_bulk_out:		1,
+	num_ports:		1,
+	open:			pl2303_open,
+	close:			pl2303_close,
+	write:			pl2303_write,
+	ioctl:			pl2303_ioctl,
+	break_ctl:		pl2303_break_ctl,
+	set_termios:		pl2303_set_termios,
+	read_bulk_callback:	pl2303_read_bulk_callback,
+	read_int_callback:	pl2303_read_int_callback,
+	write_bulk_callback:	pl2303_write_bulk_callback,
+	startup:		pl2303_startup,
+	shutdown:		pl2303_shutdown,
+};
+static struct usb_serial_device_type rsaq2_device = {
+	name:			"PL-2303 RSAQ2",
+	idVendor:		&pl2303_vendor_id,
+	idProduct:		&rsaq2_product_id,
+	needs_interrupt_in:	DONT_CARE,		/* this device must have an interrupt in endpoint */
+	needs_bulk_in:		MUST_HAVE,		/* this device must have a bulk in endpoint */
+	needs_bulk_out:		MUST_HAVE,		/* this device must have a bulk out endpoint */
+	num_interrupt_in:	NUM_DONT_CARE,
+	num_bulk_in:		1,
+	num_bulk_out:		1,
+	num_ports:		1,
+	open:			pl2303_open,
+	close:			pl2303_close,
+	write:			pl2303_write,
+	ioctl:			pl2303_ioctl,
+	break_ctl:		pl2303_break_ctl,
+	set_termios:		pl2303_set_termios,
+	read_bulk_callback:	pl2303_read_bulk_callback,
+	read_int_callback:	pl2303_read_int_callback,
+	write_bulk_callback:	pl2303_write_bulk_callback,
+	startup:		pl2303_startup,
+	shutdown:		pl2303_shutdown,
+};
+static struct usb_serial_device_type iodata_device = {
+	name:			"PL-2303 IOData",
+	idVendor:		&iodata_vendor_id,
+	idProduct:		&iodata_product_id,
+	needs_interrupt_in:	DONT_CARE,		/* this device must have an interrupt in endpoint */
+	needs_bulk_in:		MUST_HAVE,		/* this device must have a bulk in endpoint */
+	needs_bulk_out:		MUST_HAVE,		/* this device must have a bulk out endpoint */
+	num_interrupt_in:	NUM_DONT_CARE,
+	num_bulk_in:		1,
+	num_bulk_out:		1,
+	num_ports:		1,
+	open:			pl2303_open,
+	close:			pl2303_close,
+	write:			pl2303_write,
+	ioctl:			pl2303_ioctl,
+	break_ctl:		pl2303_break_ctl,
+	set_termios:		pl2303_set_termios,
+	read_bulk_callback:	pl2303_read_bulk_callback,
+	read_int_callback:	pl2303_read_int_callback,
+	write_bulk_callback:	pl2303_write_bulk_callback,
+	startup:		pl2303_startup,
+	shutdown:		pl2303_shutdown,
+};
+static struct usb_serial_device_type aten_device = {
+	name:			"PL-2303 Aten",
+	idVendor:		&aten_vendor_id,
+	idProduct:		&aten_product_id,
+	needs_interrupt_in:	DONT_CARE,		/* this device must have an interrupt in endpoint */
+	needs_bulk_in:		MUST_HAVE,		/* this device must have a bulk in endpoint */
+	needs_bulk_out:		MUST_HAVE,		/* this device must have a bulk out endpoint */
+	num_interrupt_in:	NUM_DONT_CARE,
+	num_bulk_in:		1,
+	num_bulk_out:		1,
+	num_ports:		1,
+	open:			pl2303_open,
+	close:			pl2303_close,
+	write:			pl2303_write,
+	ioctl:			pl2303_ioctl,
+	break_ctl:		pl2303_break_ctl,
+	set_termios:		pl2303_set_termios,
+	read_bulk_callback:	pl2303_read_bulk_callback,
+	read_int_callback:	pl2303_read_int_callback,
+	write_bulk_callback:	pl2303_write_bulk_callback,
+	startup:		pl2303_startup,
+	shutdown:		pl2303_shutdown,
+};
+
+struct pl2303_private { 
+	u8 line_control;
+};
+
+
+static int pl2303_startup (struct usb_serial *serial)
+{
+	struct pl2303_private *priv;
+	int i;
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		priv = kmalloc (sizeof (struct pl2303_private), GFP_KERNEL);
+		if (!priv)
+			return -ENOMEM;
+		memset (priv, 0x00, sizeof (struct pl2303_private));
+		serial->port[i].private = priv;
+	}
+	return 0;
+}
+
+static int set_control_lines (struct usb_device *dev, u8 value)
+{
+	int retval;
+	
+	retval = usb_control_msg (dev, usb_sndctrlpipe (dev, 0),
+				  SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
+				  value, 0, NULL, 0, 100);
+	dbg (__FUNCTION__" - value = %d, retval = %d", value, retval);
+	return retval;
+}
+
+static int pl2303_write (struct usb_serial_port *port, int from_user,  const unsigned char *buf, int count)
+{
+	int result;
+
+	dbg (__FUNCTION__ " - port %d, %d bytes", port->number, count);
+
+	if (!port->tty) {
+		err (__FUNCTION__ " - no tty???");
+		return 0;
+	}
+
+	if (port->write_urb->status == -EINPROGRESS) {
+		dbg (__FUNCTION__ " - already writing");
+		return 0;
+	}
+
+	count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
+	if (from_user) {
+		if (copy_from_user (port->write_urb->transfer_buffer, buf, count))
+			return -EFAULT;
+	} else {
+		memcpy (port->write_urb->transfer_buffer, buf, count);
+	}
+	
+	usb_serial_debug_data (__FILE__, __FUNCTION__, count, port->write_urb->transfer_buffer);
+
+	port->write_urb->transfer_buffer_length = count;
+	port->write_urb->dev = port->serial->dev;
+	result = usb_submit_urb (port->write_urb);
+	if (result)
+		err(__FUNCTION__ " - failed submitting write urb, error %d", result);
+	else
+		result = count;
+
+	return result;
+}
+
+
+
+static void pl2303_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+{
+	struct usb_serial *serial = port->serial;
+	struct pl2303_private *priv;
+	unsigned int cflag;
+	unsigned char *buf;
+	int baud;
+	int i;
+
+	dbg (__FUNCTION__ " -  port %d", port->number);
+
+	if ((!port->tty) || (!port->tty->termios)) {
+		dbg(__FUNCTION__" - no tty structures");
+		return;
+	}
+
+	cflag = port->tty->termios->c_cflag;
+	/* check that they really want us to change something */
+	if (old_termios) {
+		if ((cflag == old_termios->c_cflag) &&
+		    (RELEVANT_IFLAG(port->tty->termios->c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag))) {
+		    dbg(__FUNCTION__ " - nothing to change...");
+		    return;
+		}
+	}
+
+	buf = kmalloc (7, GFP_KERNEL);
+	if (!buf) {
+		err(__FUNCTION__ " - out of memory.");
+		return;
+	}
+	memset (buf, 0x00, 0x07);
+	
+	i = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0),
+			     GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
+			     0, 0, buf, 7, 100);
+	dbg ("0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x", i,
+	     buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
+
+
+	i = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
+			     VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE,
+			     0, 1, NULL, 0, 100);
+
+	dbg ("0x40:1:0:1  %d", i);
+
+	if (cflag & CSIZE) {
+		switch (cflag & CSIZE) {
+			case CS5:	buf[6] = 5;	break;
+			case CS6:	buf[6] = 6;	break;
+			case CS7:	buf[6] = 7;	break;
+			default:
+			case CS8:	buf[6] = 8;	break;
+		}
+		dbg (__FUNCTION__ " - data bits = %d", buf[6]);
+	}
+
+	baud = 0;
+	switch (cflag & CBAUD) {
+		case B0:	baud = 0;	break;
+		case B75:	baud = 75;	break;
+		case B150:	baud = 150;	break;
+		case B300:	baud = 300;	break;
+		case B600:	baud = 600;	break;
+		case B1200:	baud = 1200;	break;
+		case B1800:	baud = 1800;	break;
+		case B2400:	baud = 2400;	break;
+		case B4800:	baud = 4800;	break;
+		case B9600:	baud = 9600;	break;
+		case B19200:	baud = 19200;	break;
+		case B38400:	baud = 38400;	break;
+		case B57600:	baud = 57600;	break;
+		case B115200:	baud = 115200;	break;
+		case B230400:	baud = 230400;	break;
+		case B460800:	baud = 460800;	break;
+		default:
+			err ("pl2303 driver does not support the baudrate requested (fix it)");
+			break;
+	}
+	dbg (__FUNCTION__ " - baud = %d", baud);
+	if (baud) {
+		buf[0] = baud & 0xff;
+		buf[1] = (baud >> 8) & 0xff;
+		buf[2] = (baud >> 16) & 0xff;
+		buf[3] = (baud >> 24) & 0xff;
+	}
+
+	/* For reference buf[4]=0 is 1 stop bits */
+	/* For reference buf[4]=1 is 1.5 stop bits */
+	/* For reference buf[4]=2 is 2 stop bits */
+	if (cflag & CSTOPB) {
+		buf[4] = 2;
+		dbg(__FUNCTION__ " - stop bits = 2");
+	} else {
+		buf[4] = 0;
+		dbg(__FUNCTION__ " - stop bits = 1");
+	}
+
+	if (cflag & PARENB) {
+		/* For reference buf[5]=0 is none parity */
+		/* For reference buf[5]=1 is odd parity */
+		/* For reference buf[5]=2 is even parity */
+		/* For reference buf[5]=3 is mark parity */
+		/* For reference buf[5]=4 is space parity */
+		if (cflag & PARODD) {
+			buf[5] = 1;
+			dbg(__FUNCTION__ " - parity = odd");
+		} else {
+			buf[5] = 2;
+			dbg(__FUNCTION__ " - parity = even");
+		}
+	} else {
+		buf[5] = 0;
+		dbg(__FUNCTION__ " - parity = none");
+	}
+
+	i = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
+			     SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE, 
+			     0, 0, buf, 7, 100);
+	dbg ("0x21:0x20:0:0  %d", i);
+
+	if (cflag && CBAUD) {
+		priv = port->private;
+		if ((cflag && CBAUD) == B0)
+			priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+		else
+			priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+		set_control_lines (serial->dev, priv->line_control);
+	}
+	
+	buf[0] = buf[1] = buf[2] = buf[3] = buf[4] = buf[5] = buf[6] = 0;
+
+	i = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0),
+			     GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
+			     0, 0, buf, 7, 100);
+	dbg ("0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x", i,
+	     buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
+
+	if (cflag & CRTSCTS) {
+		i = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
+				     VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST_TYPE,
+				     0x0, 0x41, NULL, 0, 100);
+		dbg ("0x40:0x1:0x0:0x41  %d", i);
+	}
+
+	kfree (buf);
+}       
+
+
+static int pl2303_open (struct usb_serial_port *port, struct file *filp)
+{
+	struct termios tmp_termios;
+	struct usb_serial *serial = port->serial;
+	unsigned char buf[10];
+	int result;
+
+	if (port_paranoia_check (port, __FUNCTION__))
+		return -ENODEV;
+		
+	dbg (__FUNCTION__ " -  port %d", port->number);
+
+	down (&port->sem);
+
+	++port->open_count;
+	MOD_INC_USE_COUNT;
+
+	if (!port->active) {
+		port->active = 1;
+
+#define FISH(a,b,c,d)									\
+		result=usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev,0),	\
+				       b, a, c, d, buf, 1, 100);			\
+		dbg("0x%x:0x%x:0x%x:0x%x  %d - %x",a,b,c,d,result,buf[0]);
+
+#define SOUP(a,b,c,d)									\
+		result=usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev,0),	\
+				       b, a, c, d, NULL, 0, 100);			\
+		dbg("0x%x:0x%x:0x%x:0x%x  %d",a,b,c,d,result);
+
+		FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
+		SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0x0404, 0);
+		FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
+		FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8383, 0);
+		FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
+		SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0x0404, 1);
+		FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
+		FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8383, 0);
+		SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0, 1);
+		SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 1, 0xc0);
+		SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 2, 4);
+
+		/* Setup termios */
+		*(port->tty->termios) = tty_std_termios;
+		port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+
+		pl2303_set_termios (port, &tmp_termios);
+
+		//FIXME: need to assert RTS and DTR if CRTSCTS off
+
+		dbg (__FUNCTION__ " - submitting read urb");
+		port->read_urb->dev = serial->dev;
+		result = usb_submit_urb (port->read_urb);
+		if (result) {
+			err(__FUNCTION__ " - failed submitting read urb, error %d", result);
+			up (&port->sem);
+			pl2303_close (port, NULL);
+			return -EPROTO;
+		}
+
+		dbg (__FUNCTION__ " - submitting interrupt urb");
+		port->interrupt_in_urb->dev = serial->dev;
+		result = usb_submit_urb (port->interrupt_in_urb);
+		if (result) {
+			err(__FUNCTION__ " - failed submitting interrupt urb, error %d", result);
+			up (&port->sem);
+			pl2303_close (port, NULL);
+			return -EPROTO;
+		}
+	}
+	up (&port->sem);
+	return 0;
+}
+
+
+static void pl2303_close (struct usb_serial_port *port, struct file *filp)
+{
+	struct usb_serial *serial;
+	struct pl2303_private *priv;
+	unsigned int c_cflag;
+	int result;
+
+	if (port_paranoia_check (port, __FUNCTION__))
+		return;
+	serial = get_usb_serial (port, __FUNCTION__);
+	if (!serial)
+		return;
+	
+	dbg (__FUNCTION__ " - port %d", port->number);
+
+	down (&port->sem);
+
+	--port->open_count;
+	if (port->open_count <= 0) {
+		if (serial->dev) {
+			c_cflag = port->tty->termios->c_cflag;
+			if (c_cflag & HUPCL) {
+				/* drop DTR and RTS */
+				priv = port->private;
+				priv->line_control = 0;
+				set_control_lines (port->serial->dev,
+						   priv->line_control);
+			}
+
+			/* shutdown our urbs */
+			dbg (__FUNCTION__ " - shutting down urbs");
+			result = usb_unlink_urb (port->write_urb);
+			if (result)
+				dbg (__FUNCTION__ " - usb_unlink_urb "
+				     "(write_urb) failed with reason: %d",
+				     result);
+
+			result = usb_unlink_urb (port->read_urb);
+			if (result)
+				dbg (__FUNCTION__ " - usb_unlink_urb "
+				     "(read_urb) failed with reason: %d",
+				     result);
+
+			result = usb_unlink_urb (port->interrupt_in_urb);
+			if (result)
+				dbg (__FUNCTION__ " - usb_unlink_urb "
+				     "(interrupt_in_urb) failed with reason: %d",
+				     result);
+		}
+
+		port->active = 0;
+		port->open_count = 0;
+	}
+
+	up (&port->sem);
+	MOD_DEC_USE_COUNT;
+}
+
+static int set_modem_info (struct usb_serial_port *port, unsigned int cmd, unsigned int *value)
+{
+	struct pl2303_private *priv = port->private;
+	unsigned int arg;
+
+	if (copy_from_user(&arg, value, sizeof(int)))
+		return -EFAULT;
+
+	switch (cmd) {
+		case TIOCMBIS:
+			if (arg & TIOCM_RTS)
+				priv->line_control |= CONTROL_RTS;
+			if (arg & TIOCM_DTR)
+				priv->line_control |= CONTROL_DTR;
+			break;
+
+		case TIOCMBIC:
+			if (arg & TIOCM_RTS)
+				priv->line_control &= ~CONTROL_RTS;
+			if (arg & TIOCM_DTR)
+				priv->line_control &= ~CONTROL_DTR;
+			break;
+
+		case TIOCMSET:
+			/* turn off RTS and DTR and then only turn
+			   on what was asked to */
+			priv->line_control &= ~(CONTROL_RTS | CONTROL_DTR);
+			priv->line_control |= ((arg & TIOCM_RTS) ? CONTROL_RTS : 0);
+			priv->line_control |= ((arg & TIOCM_DTR) ? CONTROL_DTR : 0);
+			break;
+	}
+
+	return set_control_lines (port->serial->dev, priv->line_control);
+}
+
+static int get_modem_info (struct usb_serial_port *port, unsigned int *value)
+{
+	struct pl2303_private *priv = port->private;
+	unsigned int mcr = priv->line_control;
+	unsigned int result;
+
+	result = ((mcr & CONTROL_DTR)		? TIOCM_DTR : 0)
+		  | ((mcr & CONTROL_RTS)	? TIOCM_RTS : 0);
+
+	dbg (__FUNCTION__ " - result = %x", result);
+
+	if (copy_to_user(value, &result, sizeof(int)))
+		return -EFAULT;
+	return 0;
+}
+
+static int pl2303_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg)
+{
+	dbg (__FUNCTION__" (%d) cmd = 0x%04x", port->number, cmd);
+
+	switch (cmd) {
+		
+		case TIOCMGET:
+			dbg (__FUNCTION__" (%d) TIOCMGET", port->number);
+			return get_modem_info (port, (unsigned int *)arg);
+
+		case TIOCMBIS:
+		case TIOCMBIC:
+		case TIOCMSET:
+			dbg(__FUNCTION__" (%d) TIOCMSET/TIOCMBIC/TIOCMSET",  port->number);
+			return set_modem_info(port, cmd, (unsigned int *) arg);
+
+		default:
+			dbg (__FUNCTION__" not supported = 0x%04x", cmd);
+			break;
+	}
+
+	return -ENOIOCTLCMD;
+}
+
+
+static void pl2303_break_ctl (struct usb_serial_port *port, int break_state)
+{
+	struct usb_serial *serial = port->serial;
+	u16 state;
+	int result;
+
+	dbg (__FUNCTION__ " - port %d", port->number);
+
+	if (break_state == 0)
+		state = BREAK_OFF;
+	else
+		state = BREAK_ON;
+	dbg (__FUNCTION__" - turning break %s", state==BREAK_OFF ? "off" : "on");
+
+	result = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0),
+				  BREAK_REQUEST, BREAK_REQUEST_TYPE, state, 
+				  0, NULL, 0, 100);
+	if (result)
+		dbg (__FUNCTION__" - error sending break = %d", result);
+}
+
+
+static void pl2303_shutdown (struct usb_serial *serial)
+{
+	int i;
+
+	dbg (__FUNCTION__);
+
+	/* stop everything on all ports */
+	for (i = 0; i < serial->num_ports; ++i)
+		while (serial->port[i].open_count > 0) {
+			pl2303_close (&serial->port[i], NULL);
+			kfree (serial->port[i].private);
+		}
+}
+
+
+static void pl2303_read_int_callback (struct urb *urb)
+{
+	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+	struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+	//unsigned char *data = urb->transfer_buffer;
+	//int i;
+
+//ints auto restart...
+
+	if (!serial) {
+		return;
+	}
+
+	if (urb->status) {
+		urb->status = 0;
+		return;
+	}
+
+	usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, urb->transfer_buffer);
+#if 0
+//FIXME need to update state of terminal lines variable
+#endif
+
+	return;
+}
+
+
+static void pl2303_read_bulk_callback (struct urb *urb)
+{
+	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+	struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+	struct tty_struct *tty;
+	unsigned char *data = urb->transfer_buffer;
+	int i;
+	int result;
+
+	if (port_paranoia_check (port, __FUNCTION__))
+		return;
+
+	dbg(__FUNCTION__ " - port %d", port->number);
+
+	if (!serial) {
+		dbg(__FUNCTION__ " - bad serial pointer, exiting");
+		return;
+	}
+
+	if (urb->status) {
+		dbg (__FUNCTION__ " - urb->status = %d", urb->status);
+		if (!port->active) {
+			dbg (__FUNCTION__ " - port is closed, exiting.");
+			return;
+		}
+		if (urb->status == -EPROTO) {
+			/* PL2303 mysteriously fails with -EPROTO reschedule the read */
+			dbg (__FUNCTION__ " - caught -EPROTO, resubmitting the urb");
+			urb->status = 0;
+			urb->dev = serial->dev;
+			result = usb_submit_urb(urb);
+			if (result)
+				err(__FUNCTION__ " - failed resubmitting read urb, error %d", result);
+			return;
+		}
+		dbg (__FUNCTION__ " - unable to handle the error, exiting.");
+		return;
+	}
+
+	usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, data);
+
+	tty = port->tty;
+	if (urb->actual_length) {
+		for (i = 0; i < urb->actual_length; ++i) {
+			if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+				tty_flip_buffer_push(tty);
+			}
+			tty_insert_flip_char (tty, data[i], 0);
+		}
+		tty_flip_buffer_push (tty);
+	}
+
+	/* Schedule the next read _if_ we are still open */
+	if (port->active) {
+		urb->dev = serial->dev;
+		result = usb_submit_urb(urb);
+		if (result)
+			err(__FUNCTION__ " - failed resubmitting read urb, error %d", result);
+	}
+
+	return;
+}
+
+
+
+static void pl2303_write_bulk_callback (struct urb *urb)
+{
+	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+	int result;
+
+	if (port_paranoia_check (port, __FUNCTION__))
+		return;
+	
+	dbg(__FUNCTION__ " - port %d", port->number);
+	
+	if (urb->status) {
+		/* error in the urb, so we have to resubmit it */
+		if (serial_paranoia_check (port->serial, __FUNCTION__)) {
+			return;
+		}
+		dbg (__FUNCTION__ " - Overflow in write");
+		dbg (__FUNCTION__ " - nonzero write bulk status received: %d", urb->status);
+		port->write_urb->transfer_buffer_length = 1;
+		port->write_urb->dev = port->serial->dev;
+		result = usb_submit_urb (port->write_urb);
+		if (result)
+			err(__FUNCTION__ " - failed resubmitting write urb, error %d", result);
+
+		return;
+	}
+
+	queue_task(&port->tqueue, &tq_immediate);
+	mark_bh(IMMEDIATE_BH);
+
+	return;
+}
+
+
+static int __init pl2303_init (void)
+{
+	usb_serial_register (&pl2303_device);
+	usb_serial_register (&rsaq2_device);
+	usb_serial_register (&iodata_device);
+	usb_serial_register (&aten_device);
+	info(DRIVER_DESC " " DRIVER_VERSION);
+	return 0;
+}
+
+
+static void __exit pl2303_exit (void)
+{
+	usb_serial_deregister (&pl2303_device);
+	usb_serial_deregister (&rsaq2_device);
+	usb_serial_deregister (&iodata_device);
+	usb_serial_deregister (&aten_device);
+}
+
+
+module_init(pl2303_init);
+module_exit(pl2303_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+MODULE_PARM(debug, "i");
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
diff -Nru a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
--- /dev/null	Wed Dec 31 16:00:00 1969
+++ b/drivers/usb/serial/pl2303.h	Thu Jan  3 21:41:54 2002
@@ -0,0 +1,18 @@
+/*
+ * Prolific PL2303 USB to serial adaptor driver header file
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ * 
+ */
+#define PL2303_VENDOR_ID	0x067b
+#define PL2303_PRODUCT_ID	0x2303
+#define PL2303_PRODUCT_ID_RSAQ2	0x04bb
+
+#define ATEN_VENDOR_ID		0x0557
+#define ATEN_PRODUCT_ID		0x2008
+
+#define IODATA_VENDOR_ID	0x04bb
+#define IODATA_PRODUCT_ID	0x0a03