ChangeSet 1.1429.2.1, 2003/06/24 15:09:07-07:00, ehabkost@conectiva.com.br [PATCH] Fix compilation of ip2main The following patch fix compilation of drivers/char/ip2main.c. It was broken by the removal of pci_present(). It just adds open and closing braces around the code that declares the pci_dev_i variable. The rest of the patch just change the indentation. drivers/char/ip2main.c | 60 +++++++++++++++++++++++++------------------------ 1 files changed, 31 insertions(+), 29 deletions(-) diff -Nru a/drivers/char/ip2main.c b/drivers/char/ip2main.c --- a/drivers/char/ip2main.c Wed Jun 25 17:38:28 2003 +++ b/drivers/char/ip2main.c Wed Jun 25 17:38:28 2003 @@ -707,40 +707,42 @@ } } #else /* LINUX_VERSION_CODE > 2.1.99 */ - struct pci_dev *pci_dev_i = NULL; - pci_dev_i = pci_find_device(PCI_VENDOR_ID_COMPUTONE, - PCI_DEVICE_ID_COMPUTONE_IP2EX, pci_dev_i); - if (pci_dev_i != NULL) { - unsigned int addr; - unsigned char pci_irq; + { + struct pci_dev *pci_dev_i = NULL; + pci_dev_i = pci_find_device(PCI_VENDOR_ID_COMPUTONE, + PCI_DEVICE_ID_COMPUTONE_IP2EX, pci_dev_i); + if (pci_dev_i != NULL) { + unsigned int addr; + unsigned char pci_irq; - ip2config.type[i] = PCI; - status = - pci_read_config_dword(pci_dev_i, PCI_BASE_ADDRESS_1, &addr); - if ( addr & 1 ) { - ip2config.addr[i]=(USHORT)(addr&0xfffe); - } else { - printk( KERN_ERR "IP2: PCI I/O address error\n"); - } - status = - pci_read_config_byte(pci_dev_i, PCI_INTERRUPT_LINE, &pci_irq); + ip2config.type[i] = PCI; + status = + pci_read_config_dword(pci_dev_i, PCI_BASE_ADDRESS_1, &addr); + if ( addr & 1 ) { + ip2config.addr[i]=(USHORT)(addr&0xfffe); + } else { + printk( KERN_ERR "IP2: PCI I/O address error\n"); + } + status = + pci_read_config_byte(pci_dev_i, PCI_INTERRUPT_LINE, &pci_irq); // If the PCI BIOS assigned it, lets try and use it. If we // can't acquire it or it screws up, deal with it then. -// if (!is_valid_irq(pci_irq)) { -// printk( KERN_ERR "IP2: Bad PCI BIOS IRQ(%d)\n",pci_irq); -// pci_irq = 0; -// } - ip2config.irq[i] = pci_irq; - } else { // ann error - ip2config.addr[i] = 0; - if (status == PCIBIOS_DEVICE_NOT_FOUND) { - printk( KERN_ERR "IP2: PCI board %d not found\n", i ); - } else { - pcibios_strerror(status); - } - } +// if (!is_valid_irq(pci_irq)) { +// printk( KERN_ERR "IP2: Bad PCI BIOS IRQ(%d)\n",pci_irq); +// pci_irq = 0; +// } + ip2config.irq[i] = pci_irq; + } else { // ann error + ip2config.addr[i] = 0; + if (status == PCIBIOS_DEVICE_NOT_FOUND) { + printk( KERN_ERR "IP2: PCI board %d not found\n", i ); + } else { + pcibios_strerror(status); + } + } + } #endif /* ! 2_0_X */ #else printk( KERN_ERR "IP2: PCI card specified but PCI support not\n");