ChangeSet 1.2076, 2004/10/19 15:22:22-07:00, ben-linux@fluff.org [PATCH] I2C: S3C2410 I2C Bus driver Bus driver for the Samsung S3C2410 SoC onboard I2C controller Signed-off-by: Ben Dooks Signed-off-by: Greg Kroah-Hartman drivers/i2c/busses/Kconfig | 7 drivers/i2c/busses/Makefile | 1 drivers/i2c/busses/i2c-s3c2410.c | 877 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 885 insertions(+) diff -Nru a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig --- a/drivers/i2c/busses/Kconfig 2004-10-19 16:53:38 -07:00 +++ b/drivers/i2c/busses/Kconfig 2004-10-19 16:53:38 -07:00 @@ -291,6 +291,13 @@ depends on (RPXLITE || RPXCLASSIC) && I2C select I2C_ALGO8XX +config I2C_S3C2410 + tristate "S3C2410 I2C Driver" + depends on I2C && ARCH_S3C2410 + help + Say Y here to include support for I2C controller in the + Samsung S3C2410 based System-on-Chip devices. + config I2C_SAVAGE4 tristate "S3 Savage 4" depends on I2C && PCI && EXPERIMENTAL diff -Nru a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile --- a/drivers/i2c/busses/Makefile 2004-10-19 16:53:38 -07:00 +++ b/drivers/i2c/busses/Makefile 2004-10-19 16:53:38 -07:00 @@ -26,6 +26,7 @@ obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o obj-$(CONFIG_I2C_RPXLITE) += i2c-rpx.o +obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o obj-$(CONFIG_I2C_SAVAGE4) += i2c-savage4.o obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o diff -Nru a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c --- /dev/null Wed Dec 31 16:00:00 196900 +++ b/drivers/i2c/busses/i2c-s3c2410.c 2004-10-19 16:53:38 -07:00 @@ -0,0 +1,877 @@ +/* linux/drivers/i2c/busses/i2c-s3c2410.c + * + * Copyright (C) 2004 Simtec Electronics + * Ben Dooks + * + * S3C2410 I2C Controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +/* i2c controller state */ + +enum s3c24xx_i2c_state { + STATE_IDLE, + STATE_START, + STATE_READ, + STATE_WRITE, + STATE_STOP +}; + +struct s3c24xx_i2c { + spinlock_t lock; + wait_queue_head_t wait; + + struct i2c_msg *msg; + unsigned int msg_num; + unsigned int msg_idx; + unsigned int msg_ptr; + + enum s3c24xx_i2c_state state; + + void __iomem *regs; + struct clk *clk; + struct device *dev; + struct resource *irq; + struct resource *ioarea; + struct i2c_adapter adap; +}; + +/* default platform data to use if not supplied in the platfrom_device +*/ + +static struct s3c2410_platform_i2c s3c24xx_i2c_default_platform = { + .flags = 0, + .slave_addr = 0x10, + .bus_freq = 100*1000, + .max_freq = 400*1000, +}; + + +/* s3c24xx_i2c_get_platformdata + * + * get the platform data associated with the given device, or return + * the default if there is none +*/ + +static inline struct s3c2410_platform_i2c *s3c24xx_i2c_get_platformdata(struct device *dev) +{ + if (dev->platform_data != NULL) + return (struct s3c2410_platform_i2c *)dev->platform_data; + + return &s3c24xx_i2c_default_platform; +} + +/* s3c24xx_i2c_master_complete + * + * complete the message and wake up the caller, using the given return code, + * or zero to mean ok. +*/ + +static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret) +{ + dev_dbg(i2c->dev, "master_complete %d\n", ret); + + i2c->msg_ptr = 0; + i2c->msg = NULL; + i2c->msg_idx ++; + i2c->msg_num = 0; + if (ret) + i2c->msg_idx = ret; + + wake_up(&i2c->wait); +} + +static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c) +{ + unsigned long tmp; + + tmp = readl(i2c->regs + S3C2410_IICCON); + writel(tmp & ~S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON); + +} + +static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c) +{ + unsigned long tmp; + + tmp = readl(i2c->regs + S3C2410_IICCON); + writel(tmp | S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON); + +} + +/* irq enable/disable functions */ + +static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c) +{ + unsigned long tmp; + + tmp = readl(i2c->regs + S3C2410_IICCON); + writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON); +} + +static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c) +{ + unsigned long tmp; + + tmp = readl(i2c->regs + S3C2410_IICCON); + writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON); +} + + +/* s3c24xx_i2c_message_start + * + * put the start of a message onto the bus +*/ + +static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c, + struct i2c_msg *msg) +{ + unsigned int addr = (msg->addr & 0x7f) << 1; + unsigned long stat; + + stat = readl(i2c->regs + S3C2410_IICSTAT); + stat &= ~S3C2410_IICSTAT_MODEMASK; + stat |= S3C2410_IICSTAT_START; + stat |= S3C2410_IICSTAT_TXRXEN; + + if (msg->flags & I2C_M_RD) { + stat |= S3C2410_IICSTAT_MASTER_RX; + addr |= 1; + } else + stat |= S3C2410_IICSTAT_MASTER_TX; + + // todo - check for wether ack wanted or not + s3c24xx_i2c_enable_ack(i2c); + + dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr); + writeb(addr, i2c->regs + S3C2410_IICDS); + writel(stat, i2c->regs + S3C2410_IICSTAT); +} + +static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret) +{ + unsigned long iicstat = readl(i2c->regs + S3C2410_IICSTAT); + + dev_dbg(i2c->dev, "STOP\n"); + + /* stop the transfer */ + iicstat &= ~ S3C2410_IICSTAT_START; + writel(iicstat, i2c->regs + S3C2410_IICSTAT); + + i2c->state = STATE_STOP; + + s3c24xx_i2c_master_complete(i2c, ret); + s3c24xx_i2c_disable_irq(i2c); +} + +/* helper functions to determine the current state in the set of + * messages we are sending */ + +/* is_lastmsg() + * + * returns TRUE if the current message is the last in the set +*/ + +static inline int is_lastmsg(struct s3c24xx_i2c *i2c) +{ + return i2c->msg_idx >= (i2c->msg_num - 1); +} + +/* is_msglast + * + * returns TRUE if we this is the last byte in the current message +*/ + +static inline int is_msglast(struct s3c24xx_i2c *i2c) +{ + return i2c->msg_ptr == i2c->msg->len-1; +} + +/* is_msgend + * + * returns TRUE if we reached the end of the current message +*/ + +static inline int is_msgend(struct s3c24xx_i2c *i2c) +{ + return i2c->msg_ptr >= i2c->msg->len; +} + +/* i2s_s3c_irq_nextbyte + * + * process an interrupt and work out what to do + */ + +static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) +{ + unsigned long tmp; + unsigned char byte; + int ret = 0; + + switch (i2c->state) { + + case STATE_IDLE: + dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __FUNCTION__); + goto out; + break; + + case STATE_STOP: + dev_err(i2c->dev, "%s: called in STATE_STOP\n", __FUNCTION__); + s3c24xx_i2c_disable_irq(i2c); + goto out_ack; + + case STATE_START: + /* last thing we did was send a start condition on the + * bus, or started a new i2c message + */ + + if (iicstat & S3C2410_IICSTAT_LASTBIT && + !(i2c->msg->flags & I2C_M_IGNORE_NAK)) { + /* ack was not received... */ + + s3c24xx_i2c_stop(i2c, -EREMOTEIO); + goto out_ack; + } + + if (i2c->msg->flags & I2C_M_RD) + i2c->state = STATE_READ; + else + i2c->state = STATE_WRITE; + + /* terminate the transfer if there is nothing to do + * (used by the i2c probe to find devices */ + + if (is_lastmsg(i2c) && i2c->msg->len == 0) { + s3c24xx_i2c_stop(i2c, 0); + goto out_ack; + } + + if (i2c->state == STATE_READ) + goto prepare_read; + + /* fall through to the write state, as we will need to + * send a byte as well */ + + case STATE_WRITE: + /* we are writing data to the device... check for the + * end of the message, and if so, work out what to do + */ + + retry_write: + if (!is_msgend(i2c)) { + byte = i2c->msg->buf[i2c->msg_ptr++]; + writeb(byte, i2c->regs + S3C2410_IICDS); + + } else if (!is_lastmsg(i2c)) { + /* we need to go to the next i2c message */ + + dev_dbg(i2c->dev, "WRITE: Next Message\n"); + + i2c->msg_ptr = 0; + i2c->msg_idx ++; + i2c->msg++; + + /* check to see if we need to do another message */ + if (i2c->msg->flags & I2C_M_NOSTART) { + + if (i2c->msg->flags & I2C_M_RD) { + /* cannot do this, the controller + * forces us to send a new START + * when we change direction */ + + s3c24xx_i2c_stop(i2c, -EINVAL); + } + + goto retry_write; + } else { + + /* send the new start */ + s3c24xx_i2c_message_start(i2c, i2c->msg); + i2c->state = STATE_START; + } + + } else { + /* send stop */ + + s3c24xx_i2c_stop(i2c, 0); + } + break; + + case STATE_READ: + /* we have a byte of data in the data register, do + * something with it, and then work out wether we are + * going to do any more read/write + */ + + if (!(i2c->msg->flags & I2C_M_IGNORE_NAK) && + !(is_msglast(i2c) && is_lastmsg(i2c))) { + + if (iicstat & S3C2410_IICSTAT_LASTBIT) { + dev_dbg(i2c->dev, "READ: No Ack\n"); + + s3c24xx_i2c_stop(i2c, -ECONNREFUSED); + goto out_ack; + } + } + + byte = readb(i2c->regs + S3C2410_IICDS); + i2c->msg->buf[i2c->msg_ptr++] = byte; + + prepare_read: + if (is_msglast(i2c)) { + /* last byte of buffer */ + + if (is_lastmsg(i2c)) + s3c24xx_i2c_disable_ack(i2c); + + } else if (is_msgend(i2c)) { + /* ok, we've read the entire buffer, see if there + * is anything else we need to do */ + + if (is_lastmsg(i2c)) { + /* last message, send stop and complete */ + dev_dbg(i2c->dev, "READ: Send Stop\n"); + + s3c24xx_i2c_stop(i2c, 0); + } else { + /* go to the next transfer */ + dev_dbg(i2c->dev, "READ: Next Transfer\n"); + + i2c->msg_ptr = 0; + i2c->msg_idx++; + i2c->msg++; + } + } + + break; + } + + /* acknowlegde the IRQ and get back on with the work */ + + out_ack: + tmp = readl(i2c->regs + S3C2410_IICCON); + tmp &= ~S3C2410_IICCON_IRQPEND; + writel(tmp, i2c->regs + S3C2410_IICCON); + out: + return ret; +} + +/* s3c24xx_i2c_irq + * + * top level IRQ servicing routine +*/ + +static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id, + struct pt_regs *regs) +{ + struct s3c24xx_i2c *i2c = dev_id; + unsigned long status; + unsigned long tmp; + + status = readl(i2c->regs + S3C2410_IICSTAT); + + if (status & S3C2410_IICSTAT_ARBITR) { + // deal with arbitration loss + } + + if (i2c->state == STATE_IDLE) { + dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n"); + + tmp = readl(i2c->regs + S3C2410_IICCON); + tmp &= ~S3C2410_IICCON_IRQPEND; + writel(tmp, i2c->regs + S3C2410_IICCON); + goto out; + } + + /* pretty much this leaves us with the fact that we've + * transmitted or received whatever byte we last sent */ + + i2s_s3c_irq_nextbyte(i2c, status); + + out: + return IRQ_HANDLED; +} + + +/* s3c24xx_i2c_set_master + * + * get the i2c bus for a master transaction +*/ + +static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c) +{ + unsigned long iicstat; + int timeout = 400; + + while (timeout-- > 0) { + iicstat = readl(i2c->regs + S3C2410_IICSTAT); + + if (!(iicstat & S3C2410_IICSTAT_BUSBUSY)) + return 0; + + msleep(1); + } + + dev_dbg(i2c->dev, "timeout: GPEDAT is %08x\n", + __raw_readl(S3C2410_GPEDAT)); + + return -ETIMEDOUT; +} + +/* s3c24xx_i2c_doxfer + * + * this starts an i2c transfer +*/ + +static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg msgs[], int num) +{ + unsigned long timeout; + int ret; + + ret = s3c24xx_i2c_set_master(i2c); + if (ret != 0) { + dev_err(i2c->dev, "cannot get bus (error %d)\n", ret); + ret = -EAGAIN; + goto out; + } + + spin_lock_irq(&i2c->lock); + + i2c->msg = msgs; + i2c->msg_num = num; + i2c->msg_ptr = 0; + i2c->msg_idx = 0; + i2c->state = STATE_START; + + s3c24xx_i2c_enable_irq(i2c); + s3c24xx_i2c_message_start(i2c, msgs); + spin_unlock_irq(&i2c->lock); + + timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); + + ret = i2c->msg_idx; + + /* having these next two as dev_err() makes life very + * noisy when doing an i2cdetect */ + + if (timeout == 0) + dev_dbg(i2c->dev, "timeout\n"); + else if (ret != num) + dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret); + + /* ensure the stop has been through the bus */ + + msleep(1); + + out: + return ret; +} + +/* s3c24xx_i2c_xfer + * + * first port of call from the i2c bus code when an message needs + * transfering across the i2c bus. +*/ + +static int s3c24xx_i2c_xfer(struct i2c_adapter *adap, + struct i2c_msg msgs[], int num) +{ + struct s3c24xx_i2c *i2c = (struct s3c24xx_i2c *)adap->algo_data; + int retry; + int ret; + + for (retry = 0; retry < adap->retries; retry++) { + + ret = s3c24xx_i2c_doxfer(i2c, msgs, num); + + if (ret != -EAGAIN) + return ret; + + dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry); + + udelay(100); + } + + return -EREMOTEIO; +} + +/* i2c bus registration info */ + +static struct i2c_algorithm s3c24xx_i2c_algorithm = { + .name = "S3C2410-I2C-Algorithm", + .id = I2C_ALGO_S3C2410, + .master_xfer = s3c24xx_i2c_xfer, +}; + +static struct s3c24xx_i2c s3c24xx_i2c = { + .lock = SPIN_LOCK_UNLOCKED, + .wait = __WAIT_QUEUE_HEAD_INITIALIZER(s3c24xx_i2c.wait), + .adap = { + .name = "s3c2410-i2c", + .id = I2C_ALGO_S3C2410, + .algo = &s3c24xx_i2c_algorithm, + .retries = 2, + }, +}; + +/* s3c24xx_i2c_calcdivisor + * + * return the divisor settings for a given frequency +*/ + +static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted, + unsigned int *div1, unsigned int *divs) +{ + unsigned int calc_divs = clkin / wanted; + unsigned int calc_div1; + + if (calc_divs > (16*16)) + calc_div1 = 512; + else + calc_div1 = 16; + + calc_divs += calc_div1-1; + calc_divs /= calc_div1; + + if (calc_divs == 0) + calc_divs = 1; + if (calc_divs > 17) + calc_divs = 17; + + *divs = calc_divs; + *div1 = calc_div1; + + return clkin / (calc_divs + calc_div1); +} + +/* freq_acceptable + * + * test wether a frequency is within the acceptable range of error +*/ + +static inline int freq_acceptable(unsigned int freq, unsigned int wanted) +{ + int diff = freq - wanted; + + return (diff >= -2 && diff <= 2); +} + +/* s3c24xx_i2c_getdivisor + * + * work out a divisor for the user requested frequency setting, + * either by the requested frequency, or scanning the acceptable + * range of frequencies until something is found +*/ + +static int s3c24xx_i2c_getdivisor(struct s3c24xx_i2c *i2c, + struct s3c2410_platform_i2c *pdata, + unsigned long *iicon, + unsigned int *got) +{ + unsigned long clkin = clk_get_rate(i2c->clk); + + unsigned int divs, div1; + int freq; + int start, end; + + clkin /= 1000; /* clkin now in KHz */ + + dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n", + pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq); + + if (pdata->bus_freq != 0) { + freq = s3c24xx_i2c_calcdivisor(clkin, pdata->bus_freq/1000, + &div1, &divs); + if (freq_acceptable(freq, pdata->bus_freq/1000)) + goto found; + } + + /* ok, we may have to search for something suitable... */ + + start = (pdata->max_freq == 0) ? pdata->bus_freq : pdata->max_freq; + end = pdata->min_freq; + + start /= 1000; + end /= 1000; + + /* search loop... */ + + for (; start > end; start--) { + freq = s3c24xx_i2c_calcdivisor(clkin, start, &div1, &divs); + if (freq_acceptable(freq, start)) + goto found; + } + + /* cannot find frequency spec */ + + return -EINVAL; + + found: + *got = freq; + *iicon |= (divs-1); + *iicon |= (div1 == 512) ? S3C2410_IICCON_TXDIV_512 : 0; + return 0; +} + +/* s3c24xx_i2c_init + * + * initialise the controller, set the IO lines and frequency +*/ + +static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) +{ + unsigned long iicon = S3C2410_IICCON_IRQEN | S3C2410_IICCON_ACKEN; + struct s3c2410_platform_i2c *pdata; + unsigned int freq; + + /* get the plafrom data */ + + pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent); + + /* inititalise the gpio */ + + s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA); + s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL); + + /* write slave address */ + + writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD); + + dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr); + + /* we need to work out the divisors for the clock... */ + + if (s3c24xx_i2c_getdivisor(i2c, pdata, &iicon, &freq) != 0) { + dev_err(i2c->dev, "cannot meet bus frequency required\n"); + return -EINVAL; + } + + /* todo - check that the i2c lines aren't being dragged anywhere */ + + dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq); + + return 0; +} + +static void s3c24xx_i2c_free(struct s3c24xx_i2c *i2c) +{ + if (i2c->clk != NULL && !IS_ERR(i2c->clk)) { + clk_disable(i2c->clk); + clk_unuse(i2c->clk); + clk_put(i2c->clk); + i2c->clk = NULL; + } + + if (i2c->regs != NULL) { + iounmap(i2c->regs); + i2c->regs = NULL; + } + + if (i2c->ioarea != NULL) { + release_resource(i2c->ioarea); + kfree(i2c->ioarea); + i2c->ioarea = NULL; + } +} + +/* s3c24xx_i2c_probe + * + * called by the bus driver when a suitable device is found +*/ + +static int s3c24xx_i2c_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct s3c24xx_i2c *i2c = &s3c24xx_i2c; + struct resource *res; + int ret; + + /* find the clock and enable it */ + + i2c->dev = dev; + i2c->clk = clk_get(dev, "i2c"); + if (IS_ERR(i2c->clk)) { + dev_err(dev, "cannot get clock\n"); + ret = -ENOENT; + goto out; + } + + dev_dbg(dev, "clock source %p\n", i2c->clk); + + clk_use(i2c->clk); + clk_enable(i2c->clk); + + /* map the registers */ + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(dev, "cannot find IO resource\n"); + ret = -ENOENT; + goto out; + } + + i2c->ioarea = request_mem_region(res->start, (res->end-res->start)+1, + pdev->name); + + if (i2c->ioarea == NULL) { + dev_err(dev, "cannot request IO\n"); + ret = -ENXIO; + goto out; + } + + i2c->regs = ioremap(res->start, (res->end-res->start)+1); + + if (i2c->regs == NULL) { + dev_err(dev, "cannot map IO\n"); + ret = -ENXIO; + goto out; + } + + dev_dbg(dev, "registers %p (%p, %p)\n", i2c->regs, i2c->ioarea, res); + + /* setup info block for the i2c core */ + + i2c->adap.algo_data = i2c; + i2c->adap.dev.parent = dev; + + /* initialise the i2c controller */ + + ret = s3c24xx_i2c_init(i2c); + if (ret != 0) + goto out; + + /* find the IRQ for this unit (note, this relies on the init call to + * ensure no current IRQs pending + */ + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res == NULL) { + dev_err(dev, "cannot find IRQ\n"); + ret = -ENOENT; + goto out; + } + + ret = request_irq(res->start, s3c24xx_i2c_irq, SA_INTERRUPT, + pdev->name, i2c); + + if (ret != 0) { + dev_err(dev, "cannot claim IRQ\n"); + goto out; + } + + i2c->irq = res; + + dev_dbg(dev, "irq resource %p (%ld)\n", res, res->start); + + ret = i2c_add_adapter(&i2c->adap); + if (ret < 0) { + dev_err(dev, "failed to add bus to i2c core\n"); + goto out; + } + + dev_set_drvdata(dev, i2c); + + dev_info(dev, "%s: S3C I2C adapter\n", i2c->adap.dev.bus_id); + + out: + if (ret < 0) + s3c24xx_i2c_free(i2c); + + return ret; +} + +/* s3c24xx_i2c_remove + * + * called when device is removed from the bus +*/ + +static int s3c24xx_i2c_remove(struct device *dev) +{ + struct s3c24xx_i2c *i2c = dev_get_drvdata(dev); + + if (i2c != NULL) { + s3c24xx_i2c_free(i2c); + dev_set_drvdata(dev, NULL); + } + + return 0; +} + +#ifdef CONFIG_PM +static int s3c24xx_i2c_resume(struct device *dev, u32 level) +{ + struct s3c24xx_i2c *i2c = dev_get_drvdata(dev); + + if (i2c != NULL && level == RESUME_ENABLE) { + dev_dbg(dev, "resume: level %d\n", level); + s3c24xx_i2c_init(i2c); + } + + return 0; +} + +#else +#define s3c24xx_i2c_resume NULL +#endif + +/* device driver for platform bus bits */ + +static struct device_driver s3c24xx_i2c_driver = { + .name = "s3c2410-i2c", + .bus = &platform_bus_type, + .probe = s3c24xx_i2c_probe, + .remove = s3c24xx_i2c_remove, + .resume = s3c24xx_i2c_resume, +}; + +static int __init i2c_adap_s3c_init(void) +{ + return driver_register(&s3c24xx_i2c_driver); +} + +static void i2c_adap_s3c_exit(void) +{ + return driver_unregister(&s3c24xx_i2c_driver); +} + +module_init(i2c_adap_s3c_init); +module_exit(i2c_adap_s3c_exit); + +MODULE_DESCRIPTION("S3C24XX I2C Bus driver"); +MODULE_AUTHOR("Ben Dooks, "); +MODULE_LICENSE("GPL");