ChangeSet 1.1938.445.11, 2004/12/21 11:09:49-08:00, jmunsin@iki.fi [PATCH] I2C: it87.c update - adds manual PWM - removes buggy "reset" module parameter - fixes some whitespaces Signed-off-by: Jonas Munsin Signed-off-by: Greg Kroah-Hartman drivers/i2c/chips/it87.c | 147 +++++++++++++++++++++++++++++++++++++++++------ 1 files changed, 130 insertions(+), 17 deletions(-) diff -Nru a/drivers/i2c/chips/it87.c b/drivers/i2c/chips/it87.c --- a/drivers/i2c/chips/it87.c 2005-01-07 14:55:04 -08:00 +++ b/drivers/i2c/chips/it87.c 2005-01-07 14:55:04 -08:00 @@ -96,9 +96,6 @@ /* Update battery voltage after every reading if true */ static int update_vbat; -/* Reset the registers on init if true */ -static int reset; - /* Chip Type */ static u16 chip_type; @@ -128,6 +125,8 @@ #define IT87_REG_FAN(nr) (0x0d + (nr)) #define IT87_REG_FAN_MIN(nr) (0x10 + (nr)) #define IT87_REG_FAN_MAIN_CTRL 0x13 +#define IT87_REG_FAN_CTL 0x14 +#define IT87_REG_PWM(nr) (0x15 + (nr)) #define IT87_REG_VIN(nr) (0x20 + (nr)) #define IT87_REG_TEMP(nr) (0x29 + (nr)) @@ -164,6 +163,9 @@ #define ALARMS_FROM_REG(val) (val) +#define PWM_TO_REG(val) ((val) >> 1) +#define PWM_FROM_REG(val) (((val)&0x7f) << 1) + static int DIV_TO_REG(int val) { int answer = 0; @@ -200,6 +202,8 @@ u8 vid; /* Register encoding, combined */ int vrm; u32 alarms; /* Register encoding, combined */ + u8 fan_main_ctrl; /* Register value */ + u8 manual_pwm_ctl[3]; /* manual PWM value set by user */ }; @@ -440,18 +444,28 @@ { struct it87_data *data = it87_update_device(dev); return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr], - DIV_FROM_REG(data->fan_div[nr])) ); + DIV_FROM_REG(data->fan_div[nr]))); } static ssize_t show_fan_min(struct device *dev, char *buf, int nr) { struct it87_data *data = it87_update_device(dev); return sprintf(buf,"%d\n", - FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])) ); + FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]))); } static ssize_t show_fan_div(struct device *dev, char *buf, int nr) { struct it87_data *data = it87_update_device(dev); - return sprintf(buf,"%d\n", DIV_FROM_REG(data->fan_div[nr]) ); + return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); +} +static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr) +{ + struct it87_data *data = it87_update_device(dev); + return sprintf(buf,"%d\n", (data->fan_main_ctrl & (1 << nr)) ? 1 : 0); +} +static ssize_t show_pwm(struct device *dev, char *buf, int nr) +{ + struct it87_data *data = it87_update_device(dev); + return sprintf(buf,"%d\n", data->manual_pwm_ctl[nr]); } static ssize_t set_fan_min(struct device *dev, const char *buf, size_t count, int nr) @@ -499,6 +513,44 @@ } return count; } +static ssize_t set_pwm_enable(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct it87_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + if (val == 0) { + /* set on/off mode */ + data->fan_main_ctrl &= ~(1 << nr); + it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); + } else if (val == 1) { + /* set SmartGuardian mode */ + data->fan_main_ctrl |= (1 << nr); + it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); + /* set saved pwm value, clear FAN_CTLX PWM mode bit */ + it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); + } else + return -EINVAL; + + return count; +} +static ssize_t set_pwm(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct it87_data *data = i2c_get_clientdata(client); + int val = simple_strtol(buf, NULL, 10); + + if (val < 0 || val > 255) + return -EINVAL; + + data->manual_pwm_ctl[nr] = val; + if (data->fan_main_ctrl & (1 << nr)) + it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); + + return count; +} #define show_fan_offset(offset) \ static ssize_t show_fan_##offset (struct device *dev, char *buf) \ @@ -533,6 +585,36 @@ show_fan_offset(2); show_fan_offset(3); +#define show_pwm_offset(offset) \ +static ssize_t show_pwm##offset##_enable (struct device *dev, \ + char *buf) \ +{ \ + return show_pwm_enable(dev, buf, offset - 1); \ +} \ +static ssize_t show_pwm##offset (struct device *dev, char *buf) \ +{ \ + return show_pwm(dev, buf, offset - 1); \ +} \ +static ssize_t set_pwm##offset##_enable (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_pwm_enable(dev, buf, count, offset - 1); \ +} \ +static ssize_t set_pwm##offset (struct device *dev, \ + const char *buf, size_t count) \ +{ \ + return set_pwm(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ + show_pwm##offset##_enable, \ + set_pwm##offset##_enable); \ +static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ + show_pwm##offset , set_pwm##offset ); + +show_pwm_offset(1); +show_pwm_offset(2); +show_pwm_offset(3); + /* Alarms */ static ssize_t show_alarms(struct device *dev, char *buf) { @@ -774,6 +856,12 @@ device_create_file(&new_client->dev, &dev_attr_fan2_div); device_create_file(&new_client->dev, &dev_attr_fan3_div); device_create_file(&new_client->dev, &dev_attr_alarms); + device_create_file(&new_client->dev, &dev_attr_pwm1_enable); + device_create_file(&new_client->dev, &dev_attr_pwm2_enable); + device_create_file(&new_client->dev, &dev_attr_pwm3_enable); + device_create_file(&new_client->dev, &dev_attr_pwm1); + device_create_file(&new_client->dev, &dev_attr_pwm2); + device_create_file(&new_client->dev, &dev_attr_pwm3); if (data->type == it8712) { device_create_file_vrm(new_client); @@ -851,12 +939,17 @@ /* Called when we have found a new IT87. */ static void it87_init_client(struct i2c_client *client, struct it87_data *data) { - int tmp; + int tmp, i; - if (reset) { - /* Reset all except Watchdog values and last conversion values - This sets fan-divs to 2, among others */ - it87_write_value(client, IT87_REG_CONFIG, 0x80); + /* initialize to sane defaults: + * - if the chip is in manual pwm mode, this will be overwritten with + * the actual settings on the chip (so in this case, initialization + * is not needed) + * - if in automatic or on/off mode, we could switch to manual mode, + * read the registers and set manual_pwm_ctl accordingly, but currently + * this is not implemented, so we initialize to something sane */ + for (i = 0; i < 3; i++) { + data->manual_pwm_ctl[i] = 0xff; } /* Check if temperature channnels are reset manually or by some reason */ @@ -876,13 +969,35 @@ } /* Check if tachometers are reset manually or by some reason */ - tmp = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL); - if ((tmp & 0x70) == 0) { + data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL); + if ((data->fan_main_ctrl & 0x70) == 0) { /* Enable all fan tachometers */ - tmp = (tmp & 0x8f) | 0x70; - it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, tmp); + data->fan_main_ctrl |= 0x70; + it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); } + /* Set current fan mode registers and the default settings for the + * other mode registers */ + for (i = 0; i < 3; i++) { + if (data->fan_main_ctrl & (1 << i)) { + /* pwm mode */ + tmp = it87_read_value(client, IT87_REG_PWM(i)); + if (tmp & 0x80) { + /* automatic pwm - not yet implemented, but + * leave the settings made by the BIOS alone + * until a change is requested via the sysfs + * interface */ + } else { + /* manual pwm */ + data->manual_pwm_ctl[i] = PWM_FROM_REG(tmp); + } + } + } + + /* make sure the fan is on when in on/off mode */ + tmp = it87_read_value(client, IT87_REG_FAN_CTL); + it87_write_value(client, IT87_REG_FAN_CTL, tmp | 0x07); + /* Start monitoring */ it87_write_value(client, IT87_REG_CONFIG, (it87_read_value(client, IT87_REG_CONFIG) & 0x36) @@ -984,8 +1099,6 @@ MODULE_DESCRIPTION("IT8705F, IT8712F, Sis950 driver"); module_param(update_vbat, bool, 0); MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value"); -module_param(reset, bool, 0); -MODULE_PARM_DESC(reset, "Reset the chip's registers, default no"); MODULE_LICENSE("GPL"); module_init(sm_it87_init);