ChangeSet 1.1315.1.14, 2003/09/22 12:46:46-07:00, greg@kroah.com [PATCH] I2C: move i2c-prosavage.c driver to drivers/i2c/busses where it belongs. drivers/i2c/i2c-prosavage.c | 356 ------------------------------------- drivers/i2c/Kconfig | 14 - drivers/i2c/Makefile | 1 drivers/i2c/busses/Kconfig | 14 + drivers/i2c/busses/Makefile | 1 drivers/i2c/busses/i2c-prosavage.c | 356 +++++++++++++++++++++++++++++++++++++ 6 files changed, 371 insertions(+), 371 deletions(-) diff -Nru a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig --- a/drivers/i2c/Kconfig Mon Sep 22 16:13:48 2003 +++ b/drivers/i2c/Kconfig Mon Sep 22 16:13:48 2003 @@ -48,20 +48,6 @@ This support is also available as a module. If so, the module will be called i2c-algo-bit. -config I2C_PROSAVAGE - tristate "S3/VIA (Pro)Savage" - depends on I2C_ALGOBIT && PCI && EXPERIMENTAL - help - If you say yes to this option, support will be included for the - I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8 - graphics processors. - chipsets supported: - S3/VIA KM266/VT8375 aka ProSavage8 - S3/VIA KM133/VT8365 aka Savage4 - - This support is also available as a module. If so, the module - will be called i2c-prosavage. - config I2C_PHILIPSPAR tristate "Philips style parallel port adapter" depends on I2C_ALGOBIT && PARPORT diff -Nru a/drivers/i2c/Makefile b/drivers/i2c/Makefile --- a/drivers/i2c/Makefile Mon Sep 22 16:13:48 2003 +++ b/drivers/i2c/Makefile Mon Sep 22 16:13:48 2003 @@ -5,7 +5,6 @@ obj-$(CONFIG_I2C) += i2c-core.o obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o obj-$(CONFIG_I2C_ALGOBIT) += i2c-algo-bit.o -obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o obj-$(CONFIG_I2C_PHILIPSPAR) += i2c-philips-par.o obj-$(CONFIG_I2C_ELV) += i2c-elv.o obj-$(CONFIG_I2C_VELLEMAN) += i2c-velleman.o diff -Nru a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig --- a/drivers/i2c/busses/Kconfig Mon Sep 22 16:13:48 2003 +++ b/drivers/i2c/busses/Kconfig Mon Sep 22 16:13:48 2003 @@ -113,6 +113,20 @@ This driver can also be built as a module. If so, the module will be called i2c-piix4. +config I2C_PROSAVAGE + tristate "S3/VIA (Pro)Savage" + depends on I2C_ALGOBIT && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the + I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8 + graphics processors. + chipsets supported: + S3/VIA KM266/VT8375 aka ProSavage8 + S3/VIA KM133/VT8365 aka Savage4 + + This support is also available as a module. If so, the module + will be called i2c-prosavage. + config I2C_SAVAGE4 tristate "S3 Savage 4" depends on I2C && PCI && EXPERIMENTAL diff -Nru a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile --- a/drivers/i2c/busses/Makefile Mon Sep 22 16:13:48 2003 +++ b/drivers/i2c/busses/Makefile Mon Sep 22 16:13:48 2003 @@ -11,6 +11,7 @@ obj-$(CONFIG_I2C_ISA) += i2c-isa.o obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o +obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o obj-$(CONFIG_I2C_SAVAGE4) += i2c-savage4.o obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o diff -Nru a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c --- /dev/null Wed Dec 31 16:00:00 1969 +++ b/drivers/i2c/busses/i2c-prosavage.c Mon Sep 22 16:13:48 2003 @@ -0,0 +1,356 @@ +/* + * kernel/busses/i2c-prosavage.c + * + * i2c bus driver for S3/VIA 8365/8375 graphics processor. + * Copyright (c) 2003 Henk Vergonet + * Based on code written by: + * Frodo Looijaard , + * Philip Edelbrock , + * Ralph Metzler , and + * Mark D. Studebaker + * Simon Vogl + * and others + * + * Please read the lm_sensors documentation for details on use. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +/* 18-05-2003 HVE - created + * 14-06-2003 HVE - adapted for lm_sensors2 + * 17-06-2003 HVE - linux 2.5.xx compatible + * 18-06-2003 HVE - codingstyle + * 21-06-2003 HVE - compatibility lm_sensors2 and linux 2.5.xx + * codingstyle, mmio enabled + * + * This driver interfaces to the I2C bus of the VIA north bridge embedded + * ProSavage4/8 devices. Usefull for gaining access to the TV Encoder chips. + * + * Graphics cores: + * S3/VIA KM266/VT8375 aka ProSavage8 + * S3/VIA KM133/VT8365 aka Savage4 + * + * Two serial busses are implemented: + * SERIAL1 - I2C serial communications interface + * SERIAL2 - DDC2 monitor communications interface + * + * Tested on a FX41 mainboard, see http://www.shuttle.com + * + * + * TODO: + * - integration with prosavage framebuffer device + * (Additional documentation needed :( + */ + +#include +#include +#include +#include +#include + +#include + + +/* + * driver configuration + */ +#define DRIVER_ID "i2c-prosavage" +#define DRIVER_VERSION "20030621" + +#define ADAPTER_NAME(x) (x).name + +#define MAX_BUSSES 2 + +struct s_i2c_bus { + u8 *mmvga; + int i2c_reg; + int adap_ok; + struct i2c_adapter adap; + struct i2c_algo_bit_data algo; +}; + +struct s_i2c_chip { + u8 *mmio; + struct s_i2c_bus i2c_bus[MAX_BUSSES]; +}; + + +/* + * i2c configuration + */ +#ifndef I2C_HW_B_S3VIA +#define I2C_HW_B_S3VIA 0x18 /* S3VIA ProSavage adapter */ +#endif + +/* delays */ +#define CYCLE_DELAY 10 +#define TIMEOUT (HZ / 2) + + +/* + * S3/VIA 8365/8375 registers + */ +#ifndef PCI_VENDOR_ID_S3 +#define PCI_VENDOR_ID_S3 0x5333 +#endif +#ifndef PCI_DEVICE_ID_S3_SAVAGE4 +#define PCI_DEVICE_ID_S3_SAVAGE4 0x8a25 +#endif +#ifndef PCI_DEVICE_ID_S3_PROSAVAGE8 +#define PCI_DEVICE_ID_S3_PROSAVAGE8 0x8d04 +#endif + +#define VGA_CR_IX 0x3d4 +#define VGA_CR_DATA 0x3d5 + +#define CR_SERIAL1 0xa0 /* I2C serial communications interface */ +#define MM_SERIAL1 0xff20 +#define CR_SERIAL2 0xb1 /* DDC2 monitor communications interface */ + +/* based on vt8365 documentation */ +#define I2C_ENAB 0x10 +#define I2C_SCL_OUT 0x01 +#define I2C_SDA_OUT 0x02 +#define I2C_SCL_IN 0x04 +#define I2C_SDA_IN 0x08 + +#define SET_CR_IX(p, val) *((p)->mmvga + VGA_CR_IX) = (u8)(val) +#define SET_CR_DATA(p, val) *((p)->mmvga + VGA_CR_DATA) = (u8)(val) +#define GET_CR_DATA(p) *((p)->mmvga + VGA_CR_DATA) + + +/* + * Serial bus line handling + * + * serial communications register as parameter in private data + * + * TODO: locks with other code sections accessing video registers? + */ +static void bit_s3via_setscl(void *bus, int val) +{ + struct s_i2c_bus *p = (struct s_i2c_bus *)bus; + unsigned int r; + + SET_CR_IX(p, p->i2c_reg); + r = GET_CR_DATA(p); + r |= I2C_ENAB; + if (val) { + r |= I2C_SCL_OUT; + } else { + r &= ~I2C_SCL_OUT; + } + SET_CR_DATA(p, r); +} + +static void bit_s3via_setsda(void *bus, int val) +{ + struct s_i2c_bus *p = (struct s_i2c_bus *)bus; + unsigned int r; + + SET_CR_IX(p, p->i2c_reg); + r = GET_CR_DATA(p); + r |= I2C_ENAB; + if (val) { + r |= I2C_SDA_OUT; + } else { + r &= ~I2C_SDA_OUT; + } + SET_CR_DATA(p, r); +} + +static int bit_s3via_getscl(void *bus) +{ + struct s_i2c_bus *p = (struct s_i2c_bus *)bus; + + SET_CR_IX(p, p->i2c_reg); + return (0 != (GET_CR_DATA(p) & I2C_SCL_IN)); +} + +static int bit_s3via_getsda(void *bus) +{ + struct s_i2c_bus *p = (struct s_i2c_bus *)bus; + + SET_CR_IX(p, p->i2c_reg); + return (0 != (GET_CR_DATA(p) & I2C_SDA_IN)); +} + + +/* + * adapter initialisation + */ +static int i2c_register_bus(struct s_i2c_bus *p, u8 *mmvga, u32 i2c_reg) +{ + int ret; + p->adap.owner = THIS_MODULE; + p->adap.id = I2C_HW_B_S3VIA; + p->adap.algo_data = &p->algo; + p->algo.setsda = bit_s3via_setsda; + p->algo.setscl = bit_s3via_setscl; + p->algo.getsda = bit_s3via_getsda; + p->algo.getscl = bit_s3via_getscl; + p->algo.udelay = CYCLE_DELAY; + p->algo.mdelay = CYCLE_DELAY; + p->algo.timeout = TIMEOUT; + p->algo.data = p; + p->mmvga = mmvga; + p->i2c_reg = i2c_reg; + + ret = i2c_bit_add_bus(&p->adap); + if (ret) { + return ret; + } + + p->adap_ok = 1; + return 0; +} + + +/* + * Cleanup stuff + */ +static void __devexit prosavage_remove(struct pci_dev *dev) +{ + struct s_i2c_chip *chip; + int i, ret; + + chip = (struct s_i2c_chip *)pci_get_drvdata(dev); + + if (!chip) { + return; + } + for (i = MAX_BUSSES - 1; i >= 0; i--) { + if (chip->i2c_bus[i].adap_ok == 0) + continue; + + ret = i2c_bit_del_bus(&chip->i2c_bus[i].adap); + if (ret) { + printk(DRIVER_ID ": %s not removed\n", + ADAPTER_NAME(chip->i2c_bus[i].adap)); + } + } + if (chip->mmio) { + iounmap(chip->mmio); + } + kfree(chip); +} + + +/* + * Detect chip and initialize it + */ +static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + int ret; + unsigned long base, len; + struct s_i2c_chip *chip; + struct s_i2c_bus *bus; + + pci_set_drvdata(dev, kmalloc(sizeof(struct s_i2c_chip), GFP_KERNEL)); + chip = (struct s_i2c_chip *)pci_get_drvdata(dev); + if (chip == NULL) { + return -ENOMEM; + } + + memset(chip, 0, sizeof(struct s_i2c_chip)); + + base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK; + len = dev->resource[0].end - base + 1; + chip->mmio = ioremap_nocache(base, len); + + if (chip->mmio == NULL) { + printk (DRIVER_ID ": ioremap failed\n"); + prosavage_remove(dev); + return -ENODEV; + } + + + /* + * Chip initialisation + */ + /* Unlock Extended IO Space ??? */ + + + /* + * i2c bus registration + */ + bus = &chip->i2c_bus[0]; + snprintf(ADAPTER_NAME(bus->adap), sizeof(ADAPTER_NAME(bus->adap)), + "ProSavage I2C bus at %02x:%02x.%x", + dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + ret = i2c_register_bus(bus, chip->mmio + 0x8000, CR_SERIAL1); + if (ret) { + goto err_adap; + } + /* + * ddc bus registration + */ + bus = &chip->i2c_bus[1]; + snprintf(ADAPTER_NAME(bus->adap), sizeof(ADAPTER_NAME(bus->adap)), + "ProSavage DDC bus at %02x:%02x.%x", + dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + ret = i2c_register_bus(bus, chip->mmio + 0x8000, CR_SERIAL2); + if (ret) { + goto err_adap; + } + return 0; +err_adap: + printk (DRIVER_ID ": %s failed\n", ADAPTER_NAME(bus->adap)); + prosavage_remove(dev); + return ret; +} + + +/* + * Data for PCI driver interface + */ +static struct pci_device_id prosavage_pci_tbl[] = { + { + .vendor = PCI_VENDOR_ID_S3, + .device = PCI_DEVICE_ID_S3_SAVAGE4, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + },{ + .vendor = PCI_VENDOR_ID_S3, + .device = PCI_DEVICE_ID_S3_PROSAVAGE8, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + },{ 0, } +}; + +static struct pci_driver prosavage_driver = { + .name = "prosavage-smbus", + .id_table = prosavage_pci_tbl, + .probe = prosavage_probe, + .remove = __devexit_p(prosavage_remove), +}; + +static int __init i2c_prosavage_init(void) +{ + printk(DRIVER_ID " version %s (%s)\n", I2C_VERSION, DRIVER_VERSION); + return pci_module_init(&prosavage_driver); +} + +static void __exit i2c_prosavage_exit(void) +{ + pci_unregister_driver(&prosavage_driver); +} + +MODULE_DEVICE_TABLE(pci, prosavage_pci_tbl); +MODULE_AUTHOR("Henk Vergonet"); +MODULE_DESCRIPTION("ProSavage VIA 8365/8375 smbus driver"); +MODULE_LICENSE("GPL"); + +module_init (i2c_prosavage_init); +module_exit (i2c_prosavage_exit); diff -Nru a/drivers/i2c/i2c-prosavage.c b/drivers/i2c/i2c-prosavage.c --- a/drivers/i2c/i2c-prosavage.c Mon Sep 22 16:13:48 2003 +++ /dev/null Wed Dec 31 16:00:00 1969 @@ -1,356 +0,0 @@ -/* - * kernel/busses/i2c-prosavage.c - * - * i2c bus driver for S3/VIA 8365/8375 graphics processor. - * Copyright (c) 2003 Henk Vergonet - * Based on code written by: - * Frodo Looijaard , - * Philip Edelbrock , - * Ralph Metzler , and - * Mark D. Studebaker - * Simon Vogl - * and others - * - * Please read the lm_sensors documentation for details on use. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -/* 18-05-2003 HVE - created - * 14-06-2003 HVE - adapted for lm_sensors2 - * 17-06-2003 HVE - linux 2.5.xx compatible - * 18-06-2003 HVE - codingstyle - * 21-06-2003 HVE - compatibility lm_sensors2 and linux 2.5.xx - * codingstyle, mmio enabled - * - * This driver interfaces to the I2C bus of the VIA north bridge embedded - * ProSavage4/8 devices. Usefull for gaining access to the TV Encoder chips. - * - * Graphics cores: - * S3/VIA KM266/VT8375 aka ProSavage8 - * S3/VIA KM133/VT8365 aka Savage4 - * - * Two serial busses are implemented: - * SERIAL1 - I2C serial communications interface - * SERIAL2 - DDC2 monitor communications interface - * - * Tested on a FX41 mainboard, see http://www.shuttle.com - * - * - * TODO: - * - integration with prosavage framebuffer device - * (Additional documentation needed :( - */ - -#include -#include -#include -#include -#include - -#include - - -/* - * driver configuration - */ -#define DRIVER_ID "i2c-prosavage" -#define DRIVER_VERSION "20030621" - -#define ADAPTER_NAME(x) (x).name - -#define MAX_BUSSES 2 - -struct s_i2c_bus { - u8 *mmvga; - int i2c_reg; - int adap_ok; - struct i2c_adapter adap; - struct i2c_algo_bit_data algo; -}; - -struct s_i2c_chip { - u8 *mmio; - struct s_i2c_bus i2c_bus[MAX_BUSSES]; -}; - - -/* - * i2c configuration - */ -#ifndef I2C_HW_B_S3VIA -#define I2C_HW_B_S3VIA 0x18 /* S3VIA ProSavage adapter */ -#endif - -/* delays */ -#define CYCLE_DELAY 10 -#define TIMEOUT (HZ / 2) - - -/* - * S3/VIA 8365/8375 registers - */ -#ifndef PCI_VENDOR_ID_S3 -#define PCI_VENDOR_ID_S3 0x5333 -#endif -#ifndef PCI_DEVICE_ID_S3_SAVAGE4 -#define PCI_DEVICE_ID_S3_SAVAGE4 0x8a25 -#endif -#ifndef PCI_DEVICE_ID_S3_PROSAVAGE8 -#define PCI_DEVICE_ID_S3_PROSAVAGE8 0x8d04 -#endif - -#define VGA_CR_IX 0x3d4 -#define VGA_CR_DATA 0x3d5 - -#define CR_SERIAL1 0xa0 /* I2C serial communications interface */ -#define MM_SERIAL1 0xff20 -#define CR_SERIAL2 0xb1 /* DDC2 monitor communications interface */ - -/* based on vt8365 documentation */ -#define I2C_ENAB 0x10 -#define I2C_SCL_OUT 0x01 -#define I2C_SDA_OUT 0x02 -#define I2C_SCL_IN 0x04 -#define I2C_SDA_IN 0x08 - -#define SET_CR_IX(p, val) *((p)->mmvga + VGA_CR_IX) = (u8)(val) -#define SET_CR_DATA(p, val) *((p)->mmvga + VGA_CR_DATA) = (u8)(val) -#define GET_CR_DATA(p) *((p)->mmvga + VGA_CR_DATA) - - -/* - * Serial bus line handling - * - * serial communications register as parameter in private data - * - * TODO: locks with other code sections accessing video registers? - */ -static void bit_s3via_setscl(void *bus, int val) -{ - struct s_i2c_bus *p = (struct s_i2c_bus *)bus; - unsigned int r; - - SET_CR_IX(p, p->i2c_reg); - r = GET_CR_DATA(p); - r |= I2C_ENAB; - if (val) { - r |= I2C_SCL_OUT; - } else { - r &= ~I2C_SCL_OUT; - } - SET_CR_DATA(p, r); -} - -static void bit_s3via_setsda(void *bus, int val) -{ - struct s_i2c_bus *p = (struct s_i2c_bus *)bus; - unsigned int r; - - SET_CR_IX(p, p->i2c_reg); - r = GET_CR_DATA(p); - r |= I2C_ENAB; - if (val) { - r |= I2C_SDA_OUT; - } else { - r &= ~I2C_SDA_OUT; - } - SET_CR_DATA(p, r); -} - -static int bit_s3via_getscl(void *bus) -{ - struct s_i2c_bus *p = (struct s_i2c_bus *)bus; - - SET_CR_IX(p, p->i2c_reg); - return (0 != (GET_CR_DATA(p) & I2C_SCL_IN)); -} - -static int bit_s3via_getsda(void *bus) -{ - struct s_i2c_bus *p = (struct s_i2c_bus *)bus; - - SET_CR_IX(p, p->i2c_reg); - return (0 != (GET_CR_DATA(p) & I2C_SDA_IN)); -} - - -/* - * adapter initialisation - */ -static int i2c_register_bus(struct s_i2c_bus *p, u8 *mmvga, u32 i2c_reg) -{ - int ret; - p->adap.owner = THIS_MODULE; - p->adap.id = I2C_HW_B_S3VIA; - p->adap.algo_data = &p->algo; - p->algo.setsda = bit_s3via_setsda; - p->algo.setscl = bit_s3via_setscl; - p->algo.getsda = bit_s3via_getsda; - p->algo.getscl = bit_s3via_getscl; - p->algo.udelay = CYCLE_DELAY; - p->algo.mdelay = CYCLE_DELAY; - p->algo.timeout = TIMEOUT; - p->algo.data = p; - p->mmvga = mmvga; - p->i2c_reg = i2c_reg; - - ret = i2c_bit_add_bus(&p->adap); - if (ret) { - return ret; - } - - p->adap_ok = 1; - return 0; -} - - -/* - * Cleanup stuff - */ -static void __devexit prosavage_remove(struct pci_dev *dev) -{ - struct s_i2c_chip *chip; - int i, ret; - - chip = (struct s_i2c_chip *)pci_get_drvdata(dev); - - if (!chip) { - return; - } - for (i = MAX_BUSSES - 1; i >= 0; i--) { - if (chip->i2c_bus[i].adap_ok == 0) - continue; - - ret = i2c_bit_del_bus(&chip->i2c_bus[i].adap); - if (ret) { - printk(DRIVER_ID ": %s not removed\n", - ADAPTER_NAME(chip->i2c_bus[i].adap)); - } - } - if (chip->mmio) { - iounmap(chip->mmio); - } - kfree(chip); -} - - -/* - * Detect chip and initialize it - */ -static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_device_id *id) -{ - int ret; - unsigned long base, len; - struct s_i2c_chip *chip; - struct s_i2c_bus *bus; - - pci_set_drvdata(dev, kmalloc(sizeof(struct s_i2c_chip), GFP_KERNEL)); - chip = (struct s_i2c_chip *)pci_get_drvdata(dev); - if (chip == NULL) { - return -ENOMEM; - } - - memset(chip, 0, sizeof(struct s_i2c_chip)); - - base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK; - len = dev->resource[0].end - base + 1; - chip->mmio = ioremap_nocache(base, len); - - if (chip->mmio == NULL) { - printk (DRIVER_ID ": ioremap failed\n"); - prosavage_remove(dev); - return -ENODEV; - } - - - /* - * Chip initialisation - */ - /* Unlock Extended IO Space ??? */ - - - /* - * i2c bus registration - */ - bus = &chip->i2c_bus[0]; - snprintf(ADAPTER_NAME(bus->adap), sizeof(ADAPTER_NAME(bus->adap)), - "ProSavage I2C bus at %02x:%02x.%x", - dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); - ret = i2c_register_bus(bus, chip->mmio + 0x8000, CR_SERIAL1); - if (ret) { - goto err_adap; - } - /* - * ddc bus registration - */ - bus = &chip->i2c_bus[1]; - snprintf(ADAPTER_NAME(bus->adap), sizeof(ADAPTER_NAME(bus->adap)), - "ProSavage DDC bus at %02x:%02x.%x", - dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); - ret = i2c_register_bus(bus, chip->mmio + 0x8000, CR_SERIAL2); - if (ret) { - goto err_adap; - } - return 0; -err_adap: - printk (DRIVER_ID ": %s failed\n", ADAPTER_NAME(bus->adap)); - prosavage_remove(dev); - return ret; -} - - -/* - * Data for PCI driver interface - */ -static struct pci_device_id prosavage_pci_tbl[] = { - { - .vendor = PCI_VENDOR_ID_S3, - .device = PCI_DEVICE_ID_S3_SAVAGE4, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - },{ - .vendor = PCI_VENDOR_ID_S3, - .device = PCI_DEVICE_ID_S3_PROSAVAGE8, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - },{ 0, } -}; - -static struct pci_driver prosavage_driver = { - .name = "prosavage-smbus", - .id_table = prosavage_pci_tbl, - .probe = prosavage_probe, - .remove = __devexit_p(prosavage_remove), -}; - -static int __init i2c_prosavage_init(void) -{ - printk(DRIVER_ID " version %s (%s)\n", I2C_VERSION, DRIVER_VERSION); - return pci_module_init(&prosavage_driver); -} - -static void __exit i2c_prosavage_exit(void) -{ - pci_unregister_driver(&prosavage_driver); -} - -MODULE_DEVICE_TABLE(pci, prosavage_pci_tbl); -MODULE_AUTHOR("Henk Vergonet"); -MODULE_DESCRIPTION("ProSavage VIA 8365/8375 smbus driver"); -MODULE_LICENSE("GPL"); - -module_init (i2c_prosavage_init); -module_exit (i2c_prosavage_exit);