diff -urNp ref/Documentation/Configure.help numaq/Documentation/Configure.help --- ref/Documentation/Configure.help Wed Jun 26 16:25:45 2002 +++ numaq/Documentation/Configure.help Wed Jun 26 16:32:41 2002 @@ -234,7 +234,7 @@ CONFIG_CRIS Axis Communication site, . Multiquad support for NUMA systems -CONFIG_MULTIQUAD +CONFIG_X86_NUMAQ This option is used for getting Linux to run on a (IBM/Sequent) NUMA multiquad box. This changes the way that processors are bootstrapped, and uses Clustered Logical APIC addressing mode instead of Flat Logical. diff -urNp ref/arch/i386/config.in numaq/arch/i386/config.in --- ref/arch/i386/config.in Wed Jun 26 16:25:34 2002 +++ numaq/arch/i386/config.in Wed Jun 26 16:32:41 2002 @@ -209,7 +209,15 @@ if [ "$CONFIG_SMP" != "y" ]; then define_bool CONFIG_X86_IO_APIC y fi else - bool 'Multiquad NUMA system' CONFIG_MULTIQUAD + bool 'Multiquad NUMA system' CONFIG_X86_NUMAQ + if [ "$CONFIG_X86_NUMAQ" = "y" ]; then + bool 'Numa Memory Allocation Support' CONFIG_NUMA + if [ "$CONFIG_NUMA" = "y" ]; then + define_bool CONFIG_DISCONTIGMEM y + define_bool CONFIG_HAVE_ARCH_BOOTMEM_NODE y + fi + define_bool CONFIG_MULTIQUAD y + fi fi if [ "$CONFIG_SMP" = "y" -a "$CONFIG_X86_CMPXCHG" = "y" ]; then diff -urNp ref/arch/i386/kernel/Makefile numaq/arch/i386/kernel/Makefile --- ref/arch/i386/kernel/Makefile Tue Jan 22 12:55:43 2002 +++ numaq/arch/i386/kernel/Makefile Wed Jun 26 16:32:41 2002 @@ -40,5 +40,6 @@ obj-$(CONFIG_SMP) += smp.o smpboot.o tr obj-$(CONFIG_X86_LOCAL_APIC) += mpparse.o apic.o nmi.o obj-$(CONFIG_X86_IO_APIC) += io_apic.o acpitable.o obj-$(CONFIG_X86_VISWS_APIC) += visws_apic.o +obj-$(CONFIG_X86_NUMAQ) += numaq.o include $(TOPDIR)/Rules.make diff -urNp ref/arch/i386/kernel/numaq.c numaq/arch/i386/kernel/numaq.c --- ref/arch/i386/kernel/numaq.c Wed Dec 31 19:00:00 1969 +++ numaq/arch/i386/kernel/numaq.c Wed Jun 26 16:32:43 2002 @@ -0,0 +1,143 @@ +/* + * Written by: Patricia Gaughen, IBM Corporation + * + * Copyright (C) 2002, IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to + */ + +#include +#include +#include +#include +#include + +unsigned long long nodes_mem_start[MAX_NUMNODES]; +unsigned long long nodes_mem_size[MAX_NUMNODES]; + +/* + * Function: smp_dump_qct() + * + * Description: gets memory layout from the quad config table. This + * function also increments numnodes with the number of nodes (quads) + * present. + */ +static void __init smp_dump_qct(void) +{ + int node; + struct eachquadmem *eq; + struct sys_cfg_data *scd = + (struct sys_cfg_data *)__va(SYS_CFG_DATA_PRIV_ADDR); + +#define MB_TO_B(addr) ((addr) << 20) + numnodes = 0; + for(node = 0; node < MAX_NUMNODES; node++) { + if(scd->quads_present31_0 & (1 << node)) { + numnodes++; + eq = &scd->eq[node]; + /* Convert to bytes */ + nodes_mem_start[node] = MB_TO_B(((unsigned long long)eq->hi_shrd_mem_start) - + ((unsigned long long)eq->priv_mem_size)); + nodes_mem_size[node] = MB_TO_B(((unsigned long long)eq->hi_shrd_mem_size) + + ((unsigned long long)eq->priv_mem_size)); + } + } +} + +/* + * ----------------------------------------- + * + * functions related to physnode_map + * + * ----------------------------------------- + */ +/* + * physnode_map keeps track of the physical memory layout of the + * numaq nodes on a 256Mb break (each element of the array will + * represent 256Mb of memory and will be marked by the node id. so, + * if the first gig is on node 0, and the second gig is on node 1 + * physnode_map will contain: + * physnode_map[0-3] = 0; + * physnode_map[4-7] = 1; + * physnode_map[8- ] = -1; + */ +int physnode_map[MAX_ELEMENTS] = { [0 ... (MAX_ELEMENTS - 1)] = -1}; + +#define MB_TO_ELEMENT(x) (x >> ELEMENT_REPRESENTS) +#define PA_TO_MB(pa) (pa >> 20) /* assumption: a physical address is in bytes */ + +int numaqpa_to_nid(unsigned long long pa) +{ + int nid; + + nid = physnode_map[MB_TO_ELEMENT(PA_TO_MB(pa))]; + + /* the physical address passed in is not in the map for the system */ + if (nid == -1) + BUG(); + + return nid; +} + +int numaqpfn_to_nid(unsigned long pfn) +{ + return numaqpa_to_nid(((unsigned long long)pfn) << PAGE_SHIFT); +} + +/* + * for each node mark the regions + * TOPOFMEM = hi_shrd_mem_start + hi_shrd_mem_size + * + * need to be very careful to not mark 1024+ as belonging + * to node 0. will want 1027 to show as belonging to node 1 + * example: + * TOPOFMEM = 1024 + * 1024 >> 8 = 4 (subtract 1 for starting at 0] + * tmpvar = TOPOFMEM - 256 = 768 + * 1024 >> 8 = 4 (subtract 1 for starting at 0] + * + */ +static void __init initialize_physnode_map(void) +{ + int nid; + unsigned int topofmem, cur; + struct eachquadmem *eq; + struct sys_cfg_data *scd = + (struct sys_cfg_data *)__va(SYS_CFG_DATA_PRIV_ADDR); + + + for(nid = 0; nid < numnodes; nid++) { + if(scd->quads_present31_0 & (1 << nid)) { + eq = &scd->eq[nid]; + cur = eq->hi_shrd_mem_start; + topofmem = eq->hi_shrd_mem_start + eq->hi_shrd_mem_size; + while (cur < topofmem) { + physnode_map[cur >> 8] = nid; + cur += (ELEMENT_REPRESENTS - 1); + } + } + } +} + +void __init get_memcfg_numaq(void) +{ + smp_dump_qct(); + initialize_physnode_map(); +} diff -urNp ref/arch/i386/kernel/setup.c numaq/arch/i386/kernel/setup.c --- ref/arch/i386/kernel/setup.c Wed Jun 26 16:25:38 2002 +++ numaq/arch/i386/kernel/setup.c Wed Jun 26 16:32:41 2002 @@ -122,6 +122,7 @@ #include #include #include +#include /* * Machine setup.. */ @@ -875,33 +876,11 @@ nextchar: } } -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define PFN_PHYS(x) ((x) << PAGE_SHIFT) - -/* - * Reserved space for vmalloc and iomap - defined in asm/page.h - */ -#ifdef CONFIG_HIGHMEM_EMULATION -#define ORDER_DOWN(x) ((x >> (MAX_ORDER-1)) << (MAX_ORDER-1)) -#define MAXMEM_PFN \ -({ \ - int __max_pfn; \ - if (max_pfn > PFN_DOWN(MAXMEM)) \ - __max_pfn = PFN_DOWN(MAXMEM); \ - else \ - __max_pfn = ORDER_DOWN(max_pfn / 5); \ - __max_pfn; \ -}) -#else -#define MAXMEM_PFN PFN_DOWN(MAXMEM) -#endif -#define MAX_NONPAE_PFN (1 << 20) /* * Find the highest page frame number we have available */ -static void __init find_max_pfn(void) +void __init find_max_pfn(void) { int i; @@ -923,7 +902,7 @@ static void __init find_max_pfn(void) /* * Determine low and high memory ranges: */ -static unsigned long __init find_max_low_pfn(void) +unsigned long __init find_max_low_pfn(void) { unsigned long max_low_pfn; @@ -979,6 +958,7 @@ static unsigned long __init find_max_low return max_low_pfn; } +#ifndef CONFIG_DISCONTIGMEM /* * Register fully available low RAM pages with the bootmem allocator. */ @@ -1101,6 +1081,7 @@ static unsigned long __init setup_memory return max_low_pfn; } +#endif /* !CONFIG_DISCONTIGMEM */ /* * Request address space for all standard RAM and ROM resources diff -urNp ref/arch/i386/mm/Makefile numaq/arch/i386/mm/Makefile --- ref/arch/i386/mm/Makefile Tue Jan 2 11:41:12 2001 +++ numaq/arch/i386/mm/Makefile Wed Jun 26 16:32:41 2002 @@ -10,5 +10,6 @@ O_TARGET := mm.o obj-y := init.o fault.o ioremap.o extable.o +obj-$(CONFIG_DISCONTIGMEM) += discontig.o include $(TOPDIR)/Rules.make diff -urNp ref/arch/i386/mm/discontig.c numaq/arch/i386/mm/discontig.c --- ref/arch/i386/mm/discontig.c Wed Dec 31 19:00:00 1969 +++ numaq/arch/i386/mm/discontig.c Wed Jun 26 16:32:41 2002 @@ -0,0 +1,325 @@ +/* + * Written by: Patricia Gaughen, IBM Corporation + * + * Copyright (C) 2002, IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to + */ + +#include +#include +#include +#include +#include +#include +#include + +struct pfns { + unsigned long start_pfn; + unsigned long max_pfn; +}; + +plat_pg_data_t *plat_node_data[MAX_NUMNODES]; +bootmem_data_t plat_node_bdata; +struct pfns plat_node_bootpfns[MAX_NUMNODES]; + +extern unsigned long find_max_low_pfn(void); +extern void find_max_pfn(void); +extern void pagetable_init (void); +extern void kmap_init(void); +extern void init_one_highpage(struct page *, int, int); +extern inline int page_is_ram (unsigned long); + +extern unsigned long long nodes_mem_start[], nodes_mem_size[]; +extern struct e820map e820; +extern char _end; +extern unsigned long highend_pfn, highstart_pfn; +extern unsigned long max_low_pfn; +extern unsigned long totalram_pages; +extern unsigned long totalhigh_pages; + +static void __init find_max_pfn_node(int nid) +{ + unsigned long node_datasz; + unsigned long start, end; + + start = plat_node_bootpfns[nid].start_pfn = PFN_UP(nodes_mem_start[nid]); + end = PFN_DOWN(nodes_mem_start[nid]) + PFN_DOWN(nodes_mem_size[nid]); + + if (start >= end) { + BUG(); + } + if (end > max_pfn) { + end = max_pfn; + } + plat_node_bootpfns[nid].max_pfn = end; + + node_datasz = PFN_UP(sizeof(plat_pg_data_t)); + PLAT_NODE_DATA(nid) = (plat_pg_data_t *)(__va(min_low_pfn << PAGE_SHIFT)); + min_low_pfn += node_datasz; +} + +static void __init register_bootmem_low_pages(unsigned long system_max_low_pfn) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + unsigned long curr_pfn, last_pfn, size; + /* + * Reserve usable low memory + */ + if (e820.map[i].type != E820_RAM) + continue; + /* + * We are rounding up the start address of usable memory: + */ + curr_pfn = PFN_UP(e820.map[i].addr); + if (curr_pfn >= system_max_low_pfn) + continue; + /* + * ... and at the end of the usable range downwards: + */ + last_pfn = PFN_DOWN(e820.map[i].addr + e820.map[i].size); + + if (last_pfn > system_max_low_pfn) + last_pfn = system_max_low_pfn; + + /* + * .. finally, did all the rounding and playing + * around just make the area go away? + */ + if (last_pfn <= curr_pfn) + continue; + + size = last_pfn - curr_pfn; + free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn), PFN_PHYS(size)); + } +} + +unsigned long __init setup_memory(void) +{ + int nid; + unsigned long bootmap_size, system_start_pfn, system_max_low_pfn; + + get_memcfg_numa(); + + /* + * partially used pages are not usable - thus + * we are rounding upwards: + */ + system_start_pfn = min_low_pfn = PFN_UP(__pa(&_end)); + + find_max_pfn(); + system_max_low_pfn = max_low_pfn = find_max_low_pfn(); + +#ifdef CONFIG_HIGHMEM + highstart_pfn = highend_pfn = max_pfn; + if (max_pfn > system_max_low_pfn) { + highstart_pfn = system_max_low_pfn; + } + printk(KERN_NOTICE "%ldMB HIGHMEM available.\n", + pages_to_mb(highend_pfn - highstart_pfn)); +#endif + printk(KERN_NOTICE "%ldMB LOWMEM available.\n", + pages_to_mb(system_max_low_pfn)); + + for (nid = 0; nid < numnodes; nid++) + { + find_max_pfn_node(nid); + + } + + NODE_DATA(0)->bdata = &plat_node_bdata; + + /* + * Initialize the boot-time allocator (with low memory only): + */ + bootmap_size = init_bootmem_node(NODE_DATA(0), min_low_pfn, 0, system_max_low_pfn); + + register_bootmem_low_pages(system_max_low_pfn); + + /* + * Reserve the bootmem bitmap itself as well. We do this in two + * steps (first step was init_bootmem()) because this catches + * the (very unlikely) case of us accidentally initializing the + * bootmem allocator with an invalid RAM area. + */ + reserve_bootmem_node(NODE_DATA(0), HIGH_MEMORY, (PFN_PHYS(min_low_pfn) + + bootmap_size + PAGE_SIZE-1) - (HIGH_MEMORY)); + + /* + * reserve physical page 0 - it's a special BIOS page on many boxes, + * enabling clean reboots, SMP operation, laptop functions. + */ + reserve_bootmem_node(NODE_DATA(0), 0, PAGE_SIZE); + + /* + * But first pinch a few for the stack/trampoline stuff + * FIXME: Don't need the extra page at 4K, but need to fix + * trampoline before removing it. (see the GDT stuff) + */ + reserve_bootmem_node(NODE_DATA(0), PAGE_SIZE, PAGE_SIZE); + + /* + * Find and reserve possible boot-time SMP configuration: + */ + find_smp_config(); + +#ifdef CONFIG_BLK_DEV_INITRD + if (LOADER_TYPE && INITRD_START) { + if (INITRD_START + INITRD_SIZE <= (system_max_low_pfn << PAGE_SHIFT)) { + reserve_bootmem(INITRD_START, INITRD_SIZE); + initrd_start = + INITRD_START ? INITRD_START + PAGE_OFFSET : 0; + initrd_end = initrd_start+INITRD_SIZE; + } + else { + printk(KERN_ERR "initrd extends beyond end of memory " + "(0x%08lx > 0x%08lx)\ndisabling initrd\n", + INITRD_START + INITRD_SIZE, + system_max_low_pfn << PAGE_SHIFT); + initrd_start = 0; + } + } +#endif + + return system_max_low_pfn; +} + +/* + * paging_init() sets up the page tables - note that the first 8MB are + * already mapped by head.S. + * + * This routines also unmaps the page at virtual kernel address 0, so + * that we can trap those pesky NULL-reference errors in the kernel. + */ +void __init paging_init(void) +{ + + int nid; + + pagetable_init(); + + __asm__( "movl %%ecx,%%cr3\n" ::"c"(__pa(swapper_pg_dir))); + +#if CONFIG_X86_PAE + /* + * We will bail out later - printk doesnt work right now so + * the user would just see a hanging kernel. + */ + if (cpu_has_pae) + set_in_cr4(X86_CR4_PAE); +#endif + + __flush_tlb_all(); + +#ifdef CONFIG_HIGHMEM + kmap_init(); +#endif + + for (nid = 0; nid < numnodes; nid++) { + unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0}; + unsigned int max_dma; + + unsigned long low = max_low_pfn; + unsigned long high = plat_node_bootpfns[nid].max_pfn; + unsigned long start = plat_node_bootpfns[nid].start_pfn; + + max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; + + if (start > low) { +#ifdef CONFIG_HIGHMEM + zones_size[ZONE_HIGHMEM] = high - start; +#endif + } else { + if (low < max_dma) + zones_size[ZONE_DMA] = low; + else { + zones_size[ZONE_DMA] = max_dma; + zones_size[ZONE_NORMAL] = low - max_dma; +#ifdef CONFIG_HIGHMEM + zones_size[ZONE_HIGHMEM] = high - low; +#endif + } + } + free_area_init_node(nid, NODE_DATA(nid), 0, zones_size, start, 0); + } + return; +} + + +int __init mem_init_free_pages(int bad_ppro) +{ + int reservedpages; + int nid; + unsigned long pfn; + + bad_ppro = ppro_with_ram_bug(); + + /* this will put all low memory onto the freelists */ + totalram_pages += free_all_bootmem_node(NODE_DATA(0)); + + reservedpages = 0; + for (pfn = 0; pfn < max_low_pfn; pfn++) + /* + * Only count reserved RAM pages + */ + if (page_is_ram(pfn) && PageReserved(mem_map+pfn)) + reservedpages++; +#ifdef CONFIG_HIGHMEM + for (nid = 0; nid < numnodes; nid++) { + unsigned long node_pfn, node_high_size, zone_start_pfn; + struct page * zone_mem_map; + + node_high_size = NODE_DATA(nid)->node_zones[ZONE_HIGHMEM].size; + zone_mem_map = NODE_DATA(nid)->node_zones[ZONE_HIGHMEM].zone_mem_map; + zone_start_pfn = NODE_DATA(nid)->node_zones[ZONE_HIGHMEM].zone_start_pfn; + + printk("Initializing highpages for node %d\n", nid); + for (node_pfn = 0; node_pfn < node_high_size; node_pfn++) { + init_one_highpage((struct page *) (zone_mem_map + node_pfn), zone_start_pfn + node_pfn, bad_ppro); + } + } + totalram_pages += totalhigh_pages; +#endif + return reservedpages; +} + +void __init mem_init_set_max_mapnr(void) +{ + unsigned long lmax_mapnr; + int nid; + +#ifdef CONFIG_HIGHMEM + highmem_start_page = mem_map + NODE_DATA(0)->node_zones[ZONE_HIGHMEM].zone_start_mapnr; + num_physpages = highend_pfn; + num_mappedpages = max_low_pfn; + + for (nid = 0; nid < numnodes; nid++) { + lmax_mapnr = PLAT_NODE_DATA_STARTNR(nid) + PLAT_NODE_DATA_SIZE(nid); + if (lmax_mapnr > max_mapnr) { + max_mapnr = lmax_mapnr; + } + } + +#else + max_mapnr = num_mappedpages = num_physpages = max_low_pfn; +#endif +} diff -urNp ref/arch/i386/mm/init.c numaq/arch/i386/mm/init.c --- ref/arch/i386/mm/init.c Wed Jun 26 16:25:38 2002 +++ numaq/arch/i386/mm/init.c Wed Jun 26 16:32:41 2002 @@ -40,8 +40,8 @@ mmu_gather_t mmu_gathers[NR_CPUS]; unsigned long highstart_pfn, highend_pfn; -static unsigned long totalram_pages; -static unsigned long totalhigh_pages; +unsigned long totalram_pages; +unsigned long totalhigh_pages; int do_check_pgt_cache(int low, int high) { @@ -214,7 +214,7 @@ static void __init fixrange_init (unsign } } -static void __init pagetable_init (void) +void __init pagetable_init (void) { unsigned long vaddr, end; pgd_t *pgd, *pgd_base; @@ -333,6 +333,7 @@ void __init zap_low_mappings (void) flush_tlb_all(); } +#ifndef CONFIG_DISCONTIGMEM /* * paging_init() sets up the page tables - note that the first 8MB are * already mapped by head.S. @@ -381,6 +382,7 @@ void __init paging_init(void) } return; } +#endif /* !CONFIG_DISCONTIGMEM */ /* * Test if the WP bit works in supervisor mode. It isn't supported on 386's @@ -428,28 +430,6 @@ void __init test_wp_bit(void) } } -static inline int page_is_ram (unsigned long pagenr) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - unsigned long addr, end; - - if (e820.map[i].type != E820_RAM) /* not usable memory */ - continue; - /* - * !!!FIXME!!! Some BIOSen report areas as RAM that - * are not. Notably the 640->1Mb area. We need a sanity - * check here. - */ - addr = (e820.map[i].addr+PAGE_SIZE-1) >> PAGE_SHIFT; - end = (e820.map[i].addr+e820.map[i].size) >> PAGE_SHIFT; - if ((pagenr >= addr) && (pagenr < end)) - return 1; - } - return 0; -} - static inline int page_kills_ppro(unsigned long pagenr) { if(pagenr >= 0x70000 && pagenr <= 0x7003F) @@ -476,6 +456,7 @@ void __init init_one_highpage(struct pag totalhigh_pages++; } +#ifndef CONFIG_DISCONTIGMEM static int __init mem_init_free_pages(void) { extern int ppro_with_ram_bug(void); @@ -501,13 +482,8 @@ static int __init mem_init_free_pages(vo return reservedpages; } -void __init mem_init(void) +static void __init mem_init_set_max_mapnr(void) { - int codesize, reservedpages, datasize, initsize; - - if (!mem_map) - BUG(); - #ifdef CONFIG_HIGHMEM highmem_start_page = mem_map + highstart_pfn; max_mapnr = num_physpages = highend_pfn; @@ -515,6 +491,19 @@ void __init mem_init(void) #else max_mapnr = num_mappedpages = num_physpages = max_low_pfn; #endif +} + +#endif /* !CONFIG_DISCONTIGMEM */ + +void __init mem_init(void) +{ + int codesize, reservedpages, datasize, initsize; + + if (!mem_map) + BUG(); + + mem_init_set_max_mapnr(); + high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); /* clear the zero-page */ diff -urNp ref/include/asm-i386/e820.h numaq/include/asm-i386/e820.h --- ref/include/asm-i386/e820.h Fri Aug 18 12:30:51 2000 +++ numaq/include/asm-i386/e820.h Wed Jun 26 16:32:41 2002 @@ -35,6 +35,29 @@ struct e820map { }; extern struct e820map e820; + +static inline int page_is_ram (unsigned long pagenr) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + unsigned long addr, end; + + if (e820.map[i].type != E820_RAM) /* not usable memory */ + continue; + /* + * !!!FIXME!!! Some BIOSen report areas as RAM that + * are not. Notably the 640->1Mb area. We need a sanity + * check here. + */ + addr = (e820.map[i].addr+PAGE_SIZE-1) >> PAGE_SHIFT; + end = (e820.map[i].addr+e820.map[i].size) >> PAGE_SHIFT; + if ((pagenr >= addr) && (pagenr < end)) + return 1; + } + return 0; +} + #endif/*!__ASSEMBLY__*/ #endif/*__E820_HEADER*/ diff -urNp ref/include/asm-i386/io.h numaq/include/asm-i386/io.h --- ref/include/asm-i386/io.h Tue Jun 25 23:56:15 2002 +++ numaq/include/asm-i386/io.h Wed Jun 26 16:32:41 2002 @@ -100,10 +100,22 @@ static inline void * phys_to_virt(unsign * Change "struct page" to physical address. */ #ifdef CONFIG_HIGHMEM64G + +#ifndef CONFIG_DISCONTIGMEM #define page_to_phys(page) ((u64)(page - mem_map) << PAGE_SHIFT) #else +#define page_to_phys(page) ((u64)(page - page_zone(page)->zone_mem_map + page_zone(page)->zone_start_pfn) << PAGE_SHIFT) +#endif /* !CONFIG_DISCONTIGMEM */ + +#else + +#ifndef CONFIG_DISCONTIGMEM #define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) -#endif +#else +#define page_to_phys(page) ((page - page_zone(page)->zone_mem_map + page_zone(page)->zone_start_pfn) << PAGE_SHIFT) +#endif /* !CONFIG_DISCONTIGMEM */ + +#endif /* CONFIG_HIGHMEM64G */ extern void * __ioremap(unsigned long offset, unsigned long size, unsigned long flags); diff -urNp ref/include/asm-i386/max_numnodes.h numaq/include/asm-i386/max_numnodes.h --- ref/include/asm-i386/max_numnodes.h Wed Dec 31 19:00:00 1969 +++ numaq/include/asm-i386/max_numnodes.h Wed Jun 26 16:32:41 2002 @@ -0,0 +1,12 @@ +#ifndef _ASM_MAX_NUMNODES_H +#define _ASM_MAX_NUMNODES_H + +#include + +#ifdef CONFIG_X86_NUMAQ +#include +#else +#define MAX_NUMNODES 1 +#endif /* CONFIG_X86_NUMAQ */ + +#endif /* _ASM_MAX_NUMNODES_H */ diff -urNp ref/include/asm-i386/mmzone.h numaq/include/asm-i386/mmzone.h --- ref/include/asm-i386/mmzone.h Wed Dec 31 19:00:00 1969 +++ numaq/include/asm-i386/mmzone.h Wed Jun 26 16:32:43 2002 @@ -0,0 +1,104 @@ +/* + * Written by Pat Gaughen (gone@us.ibm.com) Mar 2002 + * + */ + +#ifndef _ASM_MMZONE_H_ +#define _ASM_MMZONE_H_ + +#ifdef CONFIG_DISCONTIGMEM + +#ifdef CONFIG_X86_NUMAQ +#include +#else +#define PHYSADDR_TO_NID(pa) (0) +#define PFN_TO_NID(pfn) (0) +#ifdef CONFIG_NUMA +#define _cpu_to_node(cpu) 0 +#endif /* CONFIG_NUMA */ +#endif /* CONFIG_X86_NUMAQ */ + +#ifdef CONFIG_NUMA +#define numa_node_id() _cpu_to_node(smp_processor_id()) +#endif /* CONFIG_NUMA */ + +typedef struct plat_pglist_data { + pg_data_t gendata; +} plat_pg_data_t; + +extern plat_pg_data_t *plat_node_data[]; + +/* + * Following are macros that are specific to this numa platform. + */ +#define reserve_bootmem(addr, size) \ + reserve_bootmem_node(NODE_DATA(0), (addr), (size)) +#define alloc_bootmem(x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) +#define alloc_bootmem_low(x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, 0) +#define alloc_bootmem_pages(x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) +#define alloc_bootmem_low_pages(x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0) +#define alloc_bootmem_node(ignore, x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) +#define alloc_bootmem_pages_node(ignore, x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) +#define alloc_bootmem_low_pages_node(ignore, x) \ + __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0) + +#define PLAT_NODE_DATA(n) (plat_node_data[(n)]) +#define PLAT_NODE_DATA_STARTNR(n) \ + (PLAT_NODE_DATA(n)->gendata.node_start_mapnr) +#define PLAT_NODE_DATA_SIZE(n) (PLAT_NODE_DATA(n)->gendata.node_size) +/* #define PLAT_NODE_DATA_LOCALNR(p, n) \ */ +/* (((p) >> PAGE_SHIFT) - PLAT_NODE_DATA(n)->gendata.node_start_pfn) */ +#define PLAT_NODE_DATA_LOCALNR(pfn, n) \ + ((pfn) - PLAT_NODE_DATA(n)->gendata.node_start_pfn) + +/* + * Following are macros that each numa implmentation must define. + */ + +/* + * Given a kernel address, find the home node of the underlying memory. + */ +#define KVADDR_TO_NID(kaddr) PHYSADDR_TO_NID(__pa(kaddr)) + +/* + * Return a pointer to the node data for node n. + */ +#define NODE_DATA(n) (&((PLAT_NODE_DATA(n))->gendata)) + +/* + * NODE_MEM_MAP gives the kaddr for the mem_map of the node. + */ +#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map) + +/* + * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory + * and returns the the mem_map of that node. + */ +#define ADDR_TO_MAPBASE(kaddr) \ + NODE_MEM_MAP(KVADDR_TO_NID((unsigned long)(kaddr))) + +/* + * Given a kaddr, LOCAL_BASE_ADDR finds the owning node of the memory + * and returns the kaddr corresponding to first physical page in the + * node's mem_map. + */ +#define LOCAL_BASE_ADDR(kaddr) ((unsigned long)__va(NODE_DATA(KVADDR_TO_NID(kaddr))->node_start_pfn << PAGE_SHIFT)) + +#define LOCAL_MAP_NR(kvaddr) \ + (((unsigned long)(kvaddr)-LOCAL_BASE_ADDR(kvaddr)) >> PAGE_SHIFT) + +#define kern_addr_valid(kaddr) test_bit(LOCAL_MAP_NR(kaddr), \ + NODE_DATA(KVADDR_TO_NID(kaddr))->valid_addr_bitmap) + +#define virt_to_page(kaddr) (ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr)) +/* This does not check the holes between lmem_maps */ +#define VALID_PAGE(page) (((page) - mem_map) < max_mapnr) + +#endif /* CONFIG_DISCONTIGMEM */ +#endif /* _ASM_MMZONE_H_ */ diff -urNp ref/include/asm-i386/numaq.h numaq/include/asm-i386/numaq.h --- ref/include/asm-i386/numaq.h Wed Dec 31 19:00:00 1969 +++ numaq/include/asm-i386/numaq.h Wed Jun 26 16:32:41 2002 @@ -0,0 +1,179 @@ +/* + * Written by: Patricia Gaughen, IBM Corporation + * + * Copyright (C) 2002, IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to + */ + +#ifndef NUMAQ_H +#define NUMAQ_H + +#ifdef CONFIG_X86_NUMAQ + +#include + +/* + * for now assume that 8Gb is max amount of RAM for whole system + * 8Gb * 1024Mb/Gb = 8192 Mb + * 8192 Mb / 256Mb = 32 + */ +#define MAX_ELEMENTS 32 +#define ELEMENT_REPRESENTS 8 /* 256 Mb */ + +#define PHYSADDR_TO_NID(pa) numaqpa_to_nid(pa) +#define PFN_TO_NID(pa) numaqpfn_to_nid(pa) +#define MAX_NUMNODES 8 +#ifdef CONFIG_NUMA +#define _cpu_to_node(cpu) (cpu_to_logical_apicid(cpu) >> 4) +#endif /* CONFIG_NUMA */ +extern int numaqpa_to_nid(unsigned long long); +extern int numaqpfn_to_nid(unsigned long); +extern void get_memcfg_numaq(void); +#define get_memcfg_numa() get_memcfg_numaq() + +/* + * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the + */ +#define SYS_CFG_DATA_PRIV_ADDR 0x0009d000 /* place for scd in private quad space */ + +/* + * Communication area for each processor on lynxer-processor tests. + * + * NOTE: If you change the size of this eachproc structure you need + * to change the definition for EACH_QUAD_SIZE. + */ +struct eachquadmem { + unsigned int priv_mem_start; /* Starting address of this */ + /* quad's private memory. */ + /* This is always 0. */ + /* In MB. */ + unsigned int priv_mem_size; /* Size of this quad's */ + /* private memory. */ + /* In MB. */ + unsigned int low_shrd_mem_strp_start;/* Starting address of this */ + /* quad's low shared block */ + /* (untranslated). */ + /* In MB. */ + unsigned int low_shrd_mem_start; /* Starting address of this */ + /* quad's low shared memory */ + /* (untranslated). */ + /* In MB. */ + unsigned int low_shrd_mem_size; /* Size of this quad's low */ + /* shared memory. */ + /* In MB. */ + unsigned int lmmio_copb_start; /* Starting address of this */ + /* quad's local memory */ + /* mapped I/O in the */ + /* compatibility OPB. */ + /* In MB. */ + unsigned int lmmio_copb_size; /* Size of this quad's local */ + /* memory mapped I/O in the */ + /* compatibility OPB. */ + /* In MB. */ + unsigned int lmmio_nopb_start; /* Starting address of this */ + /* quad's local memory */ + /* mapped I/O in the */ + /* non-compatibility OPB. */ + /* In MB. */ + unsigned int lmmio_nopb_size; /* Size of this quad's local */ + /* memory mapped I/O in the */ + /* non-compatibility OPB. */ + /* In MB. */ + unsigned int io_apic_0_start; /* Starting address of I/O */ + /* APIC 0. */ + unsigned int io_apic_0_sz; /* Size I/O APIC 0. */ + unsigned int io_apic_1_start; /* Starting address of I/O */ + /* APIC 1. */ + unsigned int io_apic_1_sz; /* Size I/O APIC 1. */ + unsigned int hi_shrd_mem_start; /* Starting address of this */ + /* quad's high shared memory.*/ + /* In MB. */ + unsigned int hi_shrd_mem_size; /* Size of this quad's high */ + /* shared memory. */ + /* In MB. */ + unsigned int mps_table_addr; /* Address of this quad's */ + /* MPS tables from BIOS, */ + /* in system space.*/ + unsigned int lcl_MDC_pio_addr; /* Port-I/O address for */ + /* local access of MDC. */ + unsigned int rmt_MDC_mmpio_addr; /* MM-Port-I/O address for */ + /* remote access of MDC. */ + unsigned int mm_port_io_start; /* Starting address of this */ + /* quad's memory mapped Port */ + /* I/O space. */ + unsigned int mm_port_io_size; /* Size of this quad's memory*/ + /* mapped Port I/O space. */ + unsigned int mm_rmt_io_apic_start; /* Starting address of this */ + /* quad's memory mapped */ + /* remote I/O APIC space. */ + unsigned int mm_rmt_io_apic_size; /* Size of this quad's memory*/ + /* mapped remote I/O APIC */ + /* space. */ + unsigned int mm_isa_start; /* Starting address of this */ + /* quad's memory mapped ISA */ + /* space (contains MDC */ + /* memory space). */ + unsigned int mm_isa_size; /* Size of this quad's memory*/ + /* mapped ISA space (contains*/ + /* MDC memory space). */ + unsigned int rmt_qmi_addr; /* Remote addr to access QMI.*/ + unsigned int lcl_qmi_addr; /* Local addr to access QMI. */ +}; + +/* + * Note: This structure must be NOT be changed unless the multiproc and + * OS are changed to reflect the new structure. + */ +struct sys_cfg_data { + unsigned int quad_id; + unsigned int bsp_proc_id; /* Boot Strap Processor in this quad. */ + unsigned int scd_version; /* Version number of this table. */ + unsigned int first_quad_id; + unsigned int quads_present31_0; /* 1 bit for each quad */ + unsigned int quads_present63_32; /* 1 bit for each quad */ + unsigned int config_flags; + unsigned int boot_flags; + unsigned int csr_start_addr; /* Absolute value (not in MB) */ + unsigned int csr_size; /* Absolute value (not in MB) */ + unsigned int lcl_apic_start_addr; /* Absolute value (not in MB) */ + unsigned int lcl_apic_size; /* Absolute value (not in MB) */ + unsigned int low_shrd_mem_base; /* 0 or 512MB or 1GB */ + unsigned int low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */ + /* may not be totally populated */ + unsigned int split_mem_enbl; /* 0 for no low shared memory */ + unsigned int mmio_sz; /* Size of total system memory mapped I/O */ + /* (in MB). */ + unsigned int quad_spin_lock; /* Spare location used for quad */ + /* bringup. */ + unsigned int nonzero55; /* For checksumming. */ + unsigned int nonzeroaa; /* For checksumming. */ + unsigned int scd_magic_number; + unsigned int system_type; + unsigned int checksum; + /* + * memory configuration area for each quad + */ + struct eachquadmem eq[MAX_NUMNODES]; /* indexed by quad id */ +}; + +#endif /* CONFIG_X86_NUMAQ */ +#endif /* NUMAQ_H */ + diff -urNp ref/include/asm-i386/page.h numaq/include/asm-i386/page.h --- ref/include/asm-i386/page.h Wed Jun 26 16:25:37 2002 +++ numaq/include/asm-i386/page.h Wed Jun 26 16:32:41 2002 @@ -134,8 +134,10 @@ static __inline__ int get_order(unsigned #define MAXMEM ((unsigned long)(-PAGE_OFFSET-VMALLOC_RESERVE)) #define __pa(x) ((unsigned long)(x)-PAGE_OFFSET) #define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET)) +#ifndef CONFIG_DISCONTIGMEM #define virt_to_page(kaddr) (mem_map + (__pa(kaddr) >> PAGE_SHIFT)) #define VALID_PAGE(page) ((page - mem_map) < max_mapnr) +#endif /* !CONFIG_DISCONTIGMEM */ #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) diff -urNp ref/include/asm-i386/pgtable-2level.h numaq/include/asm-i386/pgtable-2level.h --- ref/include/asm-i386/pgtable-2level.h Wed Jun 26 16:25:37 2002 +++ numaq/include/asm-i386/pgtable-2level.h Wed Jun 26 16:32:43 2002 @@ -56,9 +56,16 @@ static inline pmd_t * pmd_offset(pgd_t * } #define ptep_get_and_clear(xp) __pte(xchg(&(xp)->pte_low, 0)) #define pte_same(a, b) ((a).pte_low == (b).pte_low) + +#ifndef CONFIG_DISCONTIGMEM #define pte_page(x) (mem_map+((unsigned long)(((x).pte_low >> PAGE_SHIFT)))) -#define pte_none(x) (!(x).pte_low) #define __pmd_page(x) (mem_map + ((x).pmd_low >> PAGE_SHIFT)) +#else +#define pte_page(x) (NODE_MEM_MAP(PHYSADDR_TO_NID((x).pte_low)) + PLAT_NODE_DATA_LOCALNR(((unsigned long)((x).pte_low >> PAGE_SHIFT)), PHYSADDR_TO_NID((x).pte_low))) +#define __pmd_page(x) (NODE_MEM_MAP(PHYSADDR_TO_NID((x).pmd_low)) + PLAT_NODE_DATA_LOCALNR((((x).pmd_low >> PAGE_SHIFT)), PHYSADDR_TO_NID((x).pmd_low))) +#endif /* !CONFIG_DISCONTIGMEM */ + +#define pte_none(x) (!(x).pte_low) #define pmd_none(x) (!(x).pmd_low) #define __mk_pte(page_nr,pgprot) __pte(((page_nr) << PAGE_SHIFT) | pgprot_val(pgprot)) #define __mk_pmd(page_nr,pgprot) __pmd(((page_nr) << PAGE_SHIFT) | pgprot_val(pgprot)) diff -urNp ref/include/asm-i386/pgtable-3level.h numaq/include/asm-i386/pgtable-3level.h --- ref/include/asm-i386/pgtable-3level.h Wed Jun 26 16:25:37 2002 +++ numaq/include/asm-i386/pgtable-3level.h Wed Jun 26 16:32:41 2002 @@ -91,9 +91,17 @@ static inline int pte_same(pte_t a, pte_ return a.pte_low == b.pte_low && a.pte_high == b.pte_high; } +#ifndef CONFIG_DISCONTIGMEM #define pte_page(x) (mem_map+(((x).pte_low >> PAGE_SHIFT) | ((x).pte_high << (32 - PAGE_SHIFT)))) +#define __pmd_page(x) (mem_map+(((x).pmd_low >> PAGE_SHIFT) | ((x).pmd_high << (32 - PAGE_SHIFT)))) +#else +/* pte_page = lmem_map + nodelocal_pfn */ +#define pte_pfn(x) (((x).pte_low >> PAGE_SHIFT) | ((x).pte_high << (32 - PAGE_SHIFT))) +#define pmd_pfn(x) (((x).pmd_low >> PAGE_SHIFT) | ((x).pmd_high << (32 - PAGE_SHIFT))) +#define pte_page(x) (NODE_MEM_MAP(PFN_TO_NID(pte_pfn(x))) + PLAT_NODE_DATA_LOCALNR(pte_pfn(x), PFN_TO_NID(pte_pfn(x)))) +#define __pmd_page(x) (NODE_MEM_MAP(PFN_TO_NID(pmd_pfn(x))) + PLAT_NODE_DATA_LOCALNR(pmd_pfn(x), PFN_TO_NID(pmd_pfn(x)))) +#endif /* !CONFIG_DISCONTIGMEM */ #define pte_none(x) (!(x).pte_low && !(x).pte_high) -#define __pmd_page(x) (mem_map + (((x).pmd_low >> PAGE_SHIFT) | ((x).pmd_high << (32-PAGE_SHIFT)))) #define pmd_none(x) (!(x).pmd_low && !(x).pmd_high) static inline pte_t __mk_pte(unsigned long page_nr, pgprot_t pgprot) diff -urNp ref/include/asm-i386/pgtable.h numaq/include/asm-i386/pgtable.h --- ref/include/asm-i386/pgtable.h Wed Jun 26 16:25:38 2002 +++ numaq/include/asm-i386/pgtable.h Wed Jun 26 16:32:41 2002 @@ -296,9 +296,13 @@ static inline void ptep_mkdirty(pte_t *p * Conversion functions: convert a page and protection to a page entry, * and a page entry and page directory to the page they refer to. */ - +#ifndef CONFIG_DISCONTIGMEM #define mk_pte(page, pgprot) __mk_pte((page) - mem_map, (pgprot)) #define mk_pmd(page, pgprot) __mk_pmd((page) - mem_map, (pgprot)) +#else +#define mk_pte(page, pgprot) __mk_pte(((page) - page_zone(page)->zone_mem_map + page_zone(page)->zone_start_pfn), (pgprot)) +#define mk_pmd(page, pgprot) __mk_pmd(((page) - page_zone(page)->zone_mem_map + page_zone(page)->zone_start_pfn), (pgprot)) +#endif /* !CONFIG_DISCONTIGMEM */ /* This takes a physical page address that is used by the remapping functions */ #define mk_pte_phys(physpage, pgprot) __mk_pte((physpage) >> PAGE_SHIFT, pgprot) @@ -420,7 +424,10 @@ static inline pte_t pte_modify(pte_t pte /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ #define PageSkip(page) (0) + +#ifndef CONFIG_DISCONTIGMEM #define kern_addr_valid(addr) (1) +#endif /* !CONFIG_DISCONTIGMEM */ #define io_remap_page_range remap_page_range diff -urNp ref/include/asm-i386/setup.h numaq/include/asm-i386/setup.h --- ref/include/asm-i386/setup.h Fri Nov 12 13:12:11 1999 +++ numaq/include/asm-i386/setup.h Wed Jun 26 16:32:41 2002 @@ -1,10 +1,27 @@ -/* - * Just a place holder. We don't want to have to test x86 before - * we include stuff - */ - #ifndef _i386_SETUP_H #define _i386_SETUP_H +#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) +#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) +#define PFN_PHYS(x) ((x) << PAGE_SHIFT) + +/* + * Reserved space for vmalloc and iomap - defined in asm/page.h + */ +#ifdef CONFIG_HIGHMEM_EMULATION +#define ORDER_DOWN(x) ((x >> (MAX_ORDER-1)) << (MAX_ORDER-1)) +#define MAXMEM_PFN \ +({ \ + int __max_pfn; \ + if (max_pfn > PFN_DOWN(MAXMEM)) \ + __max_pfn = PFN_DOWN(MAXMEM); \ + else \ + __max_pfn = ORDER_DOWN(max_pfn / 5); \ + __max_pfn; \ +}) +#else +#define MAXMEM_PFN PFN_DOWN(MAXMEM) +#endif +#define MAX_NONPAE_PFN (1 << 20) #endif /* _i386_SETUP_H */ diff -urNp ref/include/linux/bootmem.h numaq/include/linux/bootmem.h --- ref/include/linux/bootmem.h Wed Jun 26 16:25:15 2002 +++ numaq/include/linux/bootmem.h Wed Jun 26 16:32:41 2002 @@ -32,9 +32,10 @@ typedef struct bootmem_data { extern unsigned long __init bootmem_bootmap_pages (unsigned long); extern unsigned long __init init_bootmem (unsigned long addr, unsigned long memend); -extern void __init reserve_bootmem (unsigned long addr, unsigned long size); extern void __init free_bootmem (unsigned long addr, unsigned long size); extern void * __init __alloc_bootmem (unsigned long size, unsigned long align, unsigned long goal); +#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE +extern void __init reserve_bootmem (unsigned long addr, unsigned long size); #define alloc_bootmem(x) \ __alloc_bootmem((x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_low(x) \ @@ -43,6 +44,7 @@ extern void * __init __alloc_bootmem (un __alloc_bootmem((x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_low_pages(x) \ __alloc_bootmem((x), PAGE_SIZE, 0) +#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */ extern unsigned long __init free_all_bootmem (void); extern unsigned long __init init_bootmem_node (pg_data_t *pgdat, unsigned long freepfn, unsigned long startpfn, unsigned long endpfn); @@ -50,11 +52,13 @@ extern void __init reserve_bootmem_node extern void __init free_bootmem_node (pg_data_t *pgdat, unsigned long addr, unsigned long size); extern unsigned long __init free_all_bootmem_node (pg_data_t *pgdat); extern void * __init __alloc_bootmem_node (pg_data_t *pgdat, unsigned long size, unsigned long align, unsigned long goal); +#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE #define alloc_bootmem_node(pgdat, x) \ __alloc_bootmem_node((pgdat), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_pages_node(pgdat, x) \ __alloc_bootmem_node((pgdat), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_low_pages_node(pgdat, x) \ __alloc_bootmem_node((pgdat), (x), PAGE_SIZE, 0) +#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */ #endif /* _LINUX_BOOTMEM_H */ diff -urNp ref/mm/bootmem.c numaq/mm/bootmem.c --- ref/mm/bootmem.c Wed Jun 26 16:25:24 2002 +++ numaq/mm/bootmem.c Wed Jun 26 16:32:41 2002 @@ -311,10 +311,12 @@ unsigned long __init init_bootmem (unsig return(init_bootmem_core(&contig_page_data, start, 0, pages)); } +#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE void __init reserve_bootmem (unsigned long addr, unsigned long size) { reserve_bootmem_core(contig_page_data.bdata, addr, size); } +#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */ void __init free_bootmem (unsigned long addr, unsigned long size) {