--- linux/include/linux/netdevice.h.orig Wed Sep 26 21:14:55 2001 +++ linux/include/linux/netdevice.h Thu Sep 27 07:51:00 2001 @@ -390,6 +390,8 @@ unsigned char *haddr); int (*neigh_setup)(struct net_device *dev, struct neigh_parms *); int (*accept_fastpath)(struct net_device *, struct dst_entry*); +#define HAVE_POLL_CONTROLLER + void (*poll_controller)(struct net_device *dev); /* open/release and usage marking */ struct module *owner; --- linux/drivers/net/tulip/tulip_core.c.orig Wed Sep 26 21:14:58 2001 +++ linux/drivers/net/tulip/tulip_core.c Fri Sep 28 09:23:22 2001 @@ -243,6 +243,7 @@ static struct net_device_stats *tulip_get_stats(struct net_device *dev); static int private_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static void set_rx_mode(struct net_device *dev); +static void poll_tulip(struct net_device *dev); @@ -1671,6 +1672,9 @@ dev->get_stats = tulip_get_stats; dev->do_ioctl = private_ioctl; dev->set_multicast_list = set_rx_mode; +#ifdef HAVE_POLL_CONTROLLER + dev->poll_controller = &poll_tulip; +#endif if (register_netdev(dev)) goto err_out_free_ring; @@ -1839,6 +1843,24 @@ /* pci_power_off (pdev, -1); */ } + + +#ifdef HAVE_POLL_CONTROLLER + +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ + +static void poll_tulip (struct net_device *dev) +{ + disable_irq(dev->irq); + tulip_interrupt (dev->irq, dev, NULL); + enable_irq(dev->irq); +} + +#endif static struct pci_driver tulip_driver = { --- linux/drivers/net/eepro100.c.orig Wed Sep 26 21:14:58 2001 +++ linux/drivers/net/eepro100.c Thu Sep 27 08:11:41 2001 @@ -542,6 +542,7 @@ static int speedo_rx(struct net_device *dev); static void speedo_tx_buffer_gc(struct net_device *dev); static void speedo_interrupt(int irq, void *dev_instance, struct pt_regs *regs); +static void poll_speedo (struct net_device *dev); static int speedo_close(struct net_device *dev); static struct net_device_stats *speedo_get_stats(struct net_device *dev); static int speedo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); @@ -837,6 +838,9 @@ dev->get_stats = &speedo_get_stats; dev->set_multicast_list = &set_rx_mode; dev->do_ioctl = &speedo_ioctl; +#ifdef HAVE_POLL_CONTROLLER + dev->poll_controller = &poll_speedo; +#endif return 0; } @@ -1594,6 +1598,23 @@ clear_bit(0, (void*)&sp->in_interrupt); return; } + +#ifdef HAVE_POLL_CONTROLLER + +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ + +static void poll_speedo (struct net_device *dev) +{ + disable_irq(dev->irq); + speedo_interrupt (dev->irq, dev, NULL); + enable_irq(dev->irq); +} + +#endif static inline struct RxFD *speedo_rx_alloc(struct net_device *dev, int entry) { --- linux/drivers/net/netconsole.c.orig Wed Sep 26 21:15:15 2001 +++ linux/drivers/net/netconsole.c Thu Sep 27 16:12:10 2001 @@ -0,0 +1,331 @@ +/* + * linux/drivers/net/netconsole.c + * + * Copyright (C) 2001 Ingo Molnar + * + * This file contains the implementation of an IRQ-safe, crash-safe + * kernel console implementation that outputs kernel messages to the + * network. + * + * Modification history: + * + * 2001-09-17 started by Ingo Molnar. + */ + +/**************************************************************** + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + ****************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct net_device *netconsole_dev; +static u16 source_port, target_port; +static u32 source_ip, target_ip; +static unsigned char daddr[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff} ; + +#define NETCONSOLE_VERSION 0x01 +#define HEADER_LEN 5 + +#define MAX_UDP_CHUNK 1460 +#define MAX_PRINT_CHUNK (MAX_UDP_CHUNK-HEADER_LEN) + +/* + * We maintain a small pool of fully-sized skbs, + * to make sure the message gets out even in + * extreme OOM situations. + */ +#define MAX_NETCONSOLE_SKBS 32 + +static spinlock_t netconsole_lock = SPIN_LOCK_UNLOCKED; +static int nr_netconsole_skbs; +static struct sk_buff *netconsole_skbs; + +#define MAX_SKB_SIZE \ + (MAX_UDP_CHUNK + sizeof(struct udphdr) + \ + sizeof(struct iphdr) + sizeof(struct ethhdr)) + +static void __refill_netconsole_skbs(void) +{ + struct sk_buff *skb; + unsigned long flags; + + spin_lock_irqsave(&netconsole_lock, flags); + while (nr_netconsole_skbs < MAX_NETCONSOLE_SKBS) { + skb = alloc_skb(MAX_SKB_SIZE, GFP_ATOMIC); + if (!skb) + break; + if (netconsole_skbs) + skb->next = netconsole_skbs; + else + skb->next = NULL; + netconsole_skbs = skb; + nr_netconsole_skbs++; + } + spin_unlock_irqrestore(&netconsole_lock, flags); +} + +static struct sk_buff * get_netconsole_skb(void) +{ + struct sk_buff *skb; + + unsigned long flags; + + spin_lock_irqsave(&netconsole_lock, flags); + skb = netconsole_skbs; + if (skb) + netconsole_skbs = skb->next; + skb->next = NULL; + nr_netconsole_skbs--; + spin_unlock_irqrestore(&netconsole_lock, flags); + + return skb; +} + +static spinlock_t sequence_lock = SPIN_LOCK_UNLOCKED; +static unsigned int offset; + +static void send_netconsole_skb(struct net_device *dev, const char *msg, unsigned int msg_len) +{ + int total_len, eth_len, ip_len, udp_len; + unsigned long flags; + struct sk_buff *skb; + struct udphdr *udph; + struct iphdr *iph; + struct ethhdr *eth; + + udp_len = msg_len + HEADER_LEN + sizeof(*udph); + ip_len = eth_len = udp_len + sizeof(*iph); + total_len = eth_len + ETH_HLEN; + + if (nr_netconsole_skbs < MAX_NETCONSOLE_SKBS) + __refill_netconsole_skbs(); + + skb = alloc_skb(total_len, GFP_ATOMIC); + if (!skb) { + skb = get_netconsole_skb(); + if (!skb) + /* tough! */ + return; + } + + atomic_set(&skb->users, 1); + skb_reserve(skb, total_len - msg_len - HEADER_LEN); + skb->data[0] = NETCONSOLE_VERSION; + + spin_lock_irqsave(&sequence_lock, flags); + put_unaligned(htonl(offset), (u32 *) (skb->data + 1)); + offset += msg_len; + spin_unlock_irqrestore(&sequence_lock, flags); + + memcpy(skb->data + HEADER_LEN, msg, msg_len); + skb->len += msg_len + HEADER_LEN; + + udph = (struct udphdr *) skb_push(skb, sizeof(*udph)); + udph->source = source_port; + udph->dest = target_port; + udph->len = htons(udp_len); + udph->check = 0; + + iph = (struct iphdr *)skb_push(skb, sizeof(*iph)); + + iph->version = 4; + iph->ihl = 5; + iph->tos = 0; + iph->tot_len = htons(ip_len); + iph->id = 0; + iph->frag_off = 0; + iph->ttl = 64; + iph->protocol = IPPROTO_UDP; + iph->check = 0; + iph->saddr = source_ip; + iph->daddr = target_ip; + iph->check = ip_fast_csum((unsigned char *)iph, iph->ihl); + + eth = (struct ethhdr *) skb_push(skb, ETH_HLEN); + + eth->h_proto = htons(ETH_P_IP); + memcpy(eth->h_source, dev->dev_addr, dev->addr_len); + memcpy(eth->h_dest, daddr, dev->addr_len); + +repeat: + spin_lock(&dev->xmit_lock); + dev->xmit_lock_owner = smp_processor_id(); + + if (netif_queue_stopped(dev)) { + dev->xmit_lock_owner = -1; + spin_unlock(&dev->xmit_lock); + + dev->poll_controller(dev); + goto repeat; + } + + dev->hard_start_xmit(skb, dev); + + dev->xmit_lock_owner = -1; + spin_unlock(&dev->xmit_lock); +} + +static void write_netconsole_msg(struct console *con, const char *msg, unsigned int msg_len) +{ + int len, left; + struct net_device *dev; + + dev = netconsole_dev; + if (!dev) + return; + + if (dev->poll_controller && netif_running(dev)) { + unsigned long flags; + + __save_flags(flags); + __cli(); + left = msg_len; +repeat: + if (left > MAX_PRINT_CHUNK) + len = MAX_PRINT_CHUNK; + else + len = left; + send_netconsole_skb(dev, msg, len); + msg += len; + left -= len; + if (left) + goto repeat; + __restore_flags(flags); + } +} + +static char *dev; +static int target_eth_byte0 = 255; +static int target_eth_byte1 = 255; +static int target_eth_byte2 = 255; +static int target_eth_byte3 = 255; +static int target_eth_byte4 = 255; +static int target_eth_byte5 = 255; + +MODULE_PARM(target_ip, "i"); +MODULE_PARM(target_eth_byte0, "i"); +MODULE_PARM(target_eth_byte1, "i"); +MODULE_PARM(target_eth_byte2, "i"); +MODULE_PARM(target_eth_byte3, "i"); +MODULE_PARM(target_eth_byte4, "i"); +MODULE_PARM(target_eth_byte5, "i"); +MODULE_PARM(source_port, "h"); +MODULE_PARM(target_port, "h"); +MODULE_PARM(dev, "s"); + +static struct console netconsole = + { flags: CON_ENABLED, write: write_netconsole_msg }; + +static int init_netconsole(void) +{ + struct net_device *ndev = NULL; + struct in_device *in_dev; + + printk(KERN_INFO "netconsole: using network device <%s>\n", dev); + // this will be valid once the device goes up. + if (dev) + ndev = dev_get_by_name(dev); + if (!ndev) { + printk(KERN_ERR "netconsole: network device %s does not exist, aborting.\n", dev); + return -1; + } + if (!ndev->poll_controller) { + printk(KERN_ERR "netconsole: %s's network driver does not implement netlogging yet, aborting.\n", dev); + return -1; + } + in_dev = in_dev_get(ndev); + if (!in_dev) { + printk(KERN_ERR "netconsole: network device %s is not an IP protocol device, aborting.\n", dev); + return -1; + } + source_ip = ntohl(in_dev->ifa_list->ifa_local); + if (!source_ip) { + printk(KERN_ERR "netconsole: network device %s has no local address, aborting.\n", dev); + return -1; + } +#define IP(x) ((char *)&source_ip)[x] + printk(KERN_INFO "netconsole: using source IP %i.%i.%i.%i\n", + IP(3), IP(2), IP(1), IP(0)); +#undef IP + source_ip = htonl(source_ip); + if (!target_ip) { + printk(KERN_ERR "netconsole: target_ip parameter not specified, aborting.\n"); + return -1; + } +#define IP(x) ((char *)&target_ip)[x] + printk(KERN_INFO "netconsole: using target IP %i.%i.%i.%i\n", + IP(3), IP(2), IP(1), IP(0)); +#undef IP + target_ip = htonl(target_ip); + if (!source_port) { + printk(KERN_ERR "netconsole: source_port parameter not specified, aborting.\n"); + return -1; + } + printk(KERN_INFO "netconsole: using source UDP port: %i\n", source_port); + source_port = htons(source_port); + if (!target_port) { + printk(KERN_ERR "netconsole: target_port parameter not specified, aborting.\n"); + return -1; + } + printk(KERN_INFO "netconsole: using target UDP port: %i\n", target_port); + target_port = htons(target_port); + + daddr[0] = target_eth_byte0; + daddr[1] = target_eth_byte1; + daddr[2] = target_eth_byte2; + daddr[3] = target_eth_byte3; + daddr[4] = target_eth_byte4; + daddr[5] = target_eth_byte5; + + if ((daddr[0] & daddr[1] & daddr[2] & daddr[3] & daddr[4] & daddr[5]) == 255) + printk(KERN_INFO "netconsole: using broadcast ethernet frames to send packets.\n"); + else + printk(KERN_INFO "netconsole: using target ethernet address %02x:%02x:%02x:%02x:%02x:%02x.\n", daddr[0], daddr[1], daddr[2], daddr[3], daddr[4], daddr[5]); + + netconsole_dev = ndev; +#define STARTUP_MSG "[...network console startup...]\n" + write_netconsole_msg(NULL, STARTUP_MSG, strlen(STARTUP_MSG)); + + register_console(&netconsole); + printk(KERN_INFO "netconsole: network logging started up successfully!\n"); + return 0; +} + +static void cleanup_netconsole(void) +{ + printk(KERN_INFO "netconsole: network logging shut down.\n"); + unregister_console(&netconsole); + +#define SHUTDOWN_MSG "[...network console shutdown...]\n" + write_netconsole_msg(NULL, SHUTDOWN_MSG, strlen(SHUTDOWN_MSG)); + netconsole_dev = NULL; +} + +module_init(init_netconsole); +module_exit(cleanup_netconsole); + +int dummy = MAX_SKB_SIZE; --- linux/drivers/net/Makefile.orig Wed Sep 26 21:14:58 2001 +++ linux/drivers/net/Makefile Wed Sep 26 21:15:15 2001 @@ -216,6 +216,8 @@ obj-y += ../acorn/net/acorn-net.o endif +obj-$(CONFIG_NETCONSOLE) += netconsole.o + # # HIPPI adapters # --- linux/drivers/net/Config.in.orig Wed Sep 26 21:14:58 2001 +++ linux/drivers/net/Config.in Wed Sep 26 21:15:15 2001 @@ -248,6 +248,8 @@ dep_tristate ' SysKonnect FDDI PCI support' CONFIG_SKFP $CONFIG_PCI fi +dep_tristate 'Network logging support' CONFIG_NETCONSOLE + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then if [ "$CONFIG_INET" = "y" ]; then bool 'HIPPI driver support (EXPERIMENTAL)' CONFIG_HIPPI --- linux/Documentation/networking/netlogging.txt.orig Wed Sep 26 21:15:15 2001 +++ linux/Documentation/networking/netlogging.txt Wed Sep 26 21:15:15 2001 @@ -0,0 +1,46 @@ + +started by Ingo Molnar , 2001.09.17 + +the network console can be configured over the module interface, +by specifying the dev=, target_ip=, source_port=, target_port= +module parameters. Sample use: + +insmod netconsole dev=eth0 target_ip=0x0a000701 \ + source_port=6666 target_port=6666 + +IP addresses must be specified in hexadecimal numbers. The +above example uses target host IP 10.0.7.1. + +if the module is loaded then all kernel messages are sent to the +target host via UDP packets. The remote host should run the +client-side 'netconsole' daemon to display & log the messages. + +WARNING: the default setting uses the broadcast ethernet address +to send packets, which can cause increased load on other systems +on the same ethernet segment. If this is not desired, then the +target ethernet address can be specified via the target_eth_byte0, +target_eth_byte1 ... byte5 module parameters. Eg.: + +insmod netconsole dev=eth0 target_ip=0x0a000701 \ + source_port=6666 target_port=6666 \ + target_eth_byte0=0x00 \ + target_eth_byte1=0x02\ + target_eth_byte2=0xA5 \ + target_eth_byte3=0x13 \ + target_eth_byte4=0x51 \ + target_eth_byte5=0xDD + +will instruct the netconsole code to use target ethernet address +00:02:A5:13:51:DD. + +NOTE: the network device (eth0 in the above case) can run any kind +of other network traffic, netconsole is not intrusive. Netconsole +might cause slight delays in other traffic if the volume of kernel +messages is high, but should have no other impact. + +netconsole was designed to be as instantaneous as possible, to +enable the logging of even the most critical kernel bugs. It works +from IRQ contexts as well, and does not enable interrupts while +sending packets. Due to these unique needs, configuration can not +be more automatic, and some fundamental limitations will remain: +only IP networks, UDP packets and ethernet devices are supported. --- linux/Documentation/Configure.help.orig Wed Sep 26 21:14:55 2001 +++ linux/Documentation/Configure.help Wed Sep 26 21:15:15 2001 @@ -9997,6 +9997,11 @@ say M here and read Documentation/modules.txt. This is recommended. The module will be called skfp.o. +Network logging support +CONFIG_NETCONSOLE + If you want to log kernel messages over the network, then say + "M" here. See Documentation/networking/netlogging.txt for details. + HIgh Performance Parallel Interface support (EXPERIMENTAL) CONFIG_HIPPI HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and