From: AKIYAMA Nobuyuki -Overview I made a patch for debugging with the help of NMI trigger switch. When kernel hangs severely, keyboard operation(e.g.Ctrl-Alt-Del) doesn't work properly. This patch enables debugging information to be displayed on console in this case. I think this feature is necessary as standard functionality. Please feel free to use this patch and let me know if you have any comments. -Background When a trouble occurs in kernel, we usually begin to investigate with following information: - panic >> panic message. - oops >> CPU registers and stack trace. - hang >> **NONE** no standard method established. -How it works Most IA32 servers have a NMI switch that fires NMI interrupt up. The NMI interrupt can interrupt even if kernel is serious state, for example deadlock under the interrupt disabled. When the NMI switch is pressed after this feature is activated, CPU registers and stack trace are displayed on console and then panic occurs. This feature is activated or deactivated with sysctl. On IA32 architecture, only the following are defined as reason of NMI interrupt: - memory parity error - I/O check error The reason code of NMI switch is not defined, so this patch assumes that all undefined NMI interrupts are fired by MNI switch. However, oprofile and NMI watchdog also use undefined NMI interrupt. Therefore this feature cannot be used at the same time with oprofile and NMI watchdog. This feature hands NMI interrupt over to oprofile and NMI watchdog. So, when they have been activated, this feature doesn't work even if it is activated. -Supported architecture IA32 -Setup Set up the system control parameter as follows: # sysctl -w kernel.unknown_nmi_panic=1 kernel.unknown_nmi_panic = 1 If the NMI switch is pressed, CPU registers and stack trace will be displayed on console and then panic occurs. Signed-off-by: Andrew Morton --- 25-akpm/Documentation/filesystems/proc.txt | 17 +++++++ 25-akpm/arch/i386/kernel/nmi.c | 64 +++++++++++++++++++++-------- 25-akpm/arch/i386/kernel/traps.c | 21 +++++++++ 25-akpm/include/linux/sysctl.h | 1 25-akpm/kernel/sysctl.c | 16 +++++++ 5 files changed, 102 insertions(+), 17 deletions(-) diff -puN arch/i386/kernel/nmi.c~nmi-trigger-switch-support-for-debuggingupdated arch/i386/kernel/nmi.c --- 25/arch/i386/kernel/nmi.c~nmi-trigger-switch-support-for-debuggingupdated 2004-07-26 16:37:41.183542032 -0700 +++ 25-akpm/arch/i386/kernel/nmi.c 2004-07-26 16:37:41.197539904 -0700 @@ -25,13 +25,17 @@ #include #include #include +#include #include #include #include #include +#include "mach_traps.h" + unsigned int nmi_watchdog = NMI_NONE; +int unknown_nmi_panic; static unsigned int nmi_hz = HZ; static unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */ static unsigned int nmi_p4_cccr_val; @@ -426,8 +430,6 @@ void setup_apic_nmi_watchdog (void) nmi_active = 1; } -static spinlock_t nmi_print_lock = SPIN_LOCK_UNLOCKED; - /* * the best way to detect whether a CPU has a 'hard lockup' problem * is to check it's local APIC timer IRQ counts. If they are not @@ -459,6 +461,8 @@ void touch_nmi_watchdog (void) alert_counter[i] = 0; } +extern void die_nmi(struct pt_regs *, const char *msg); + void nmi_watchdog_tick (struct pt_regs * regs) { @@ -477,21 +481,8 @@ void nmi_watchdog_tick (struct pt_regs * * wait a few IRQs (5 seconds) before doing the oops ... */ alert_counter[cpu]++; - if (alert_counter[cpu] == 5*nmi_hz) { - spin_lock(&nmi_print_lock); - /* - * We are in trouble anyway, lets at least try - * to get a message out. - */ - bust_spinlocks(1); - printk("NMI Watchdog detected LOCKUP on CPU%d, eip %08lx, registers:\n", cpu, regs->eip); - show_registers(regs); - printk("console shuts up ...\n"); - console_silent(); - spin_unlock(&nmi_print_lock); - bust_spinlocks(0); - do_exit(SIGSEGV); - } + if (alert_counter[cpu] == 5*nmi_hz) + die_nmi(regs, "NMI Watchdog detected LOCKUP"); } else { last_irq_sums[cpu] = sum; alert_counter[cpu] = 0; @@ -518,6 +509,45 @@ void nmi_watchdog_tick (struct pt_regs * } } +static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) +{ + unsigned char reason = get_nmi_reason(); + char buf[64]; + + if (!(reason & 0xc0)) { + sprintf(buf, "NMI received for unknown reason %02x\n", reason); + die_nmi(regs, buf); + } + return 0; +} + +/* + * proc handler for /proc/sys/kernel/unknown_nmi_panic + */ +int proc_unknown_nmi_panic(ctl_table *table, int write, + struct file *file, void __user *buffer, size_t *length) +{ + int old_state; + + old_state = unknown_nmi_panic; + proc_dointvec(table, write, file, buffer, length); + if (!!old_state == !!unknown_nmi_panic) + return 0; + + if (unknown_nmi_panic) { + if (reserve_lapic_nmi() < 0) { + unknown_nmi_panic = 0; + return -EBUSY; + } else { + set_nmi_callback(unknown_nmi_panic_callback); + } + } else { + release_lapic_nmi(); + unset_nmi_callback(); + } + return 0; +} + EXPORT_SYMBOL(nmi_active); EXPORT_SYMBOL(nmi_watchdog); EXPORT_SYMBOL(reserve_lapic_nmi); diff -puN arch/i386/kernel/traps.c~nmi-trigger-switch-support-for-debuggingupdated arch/i386/kernel/traps.c --- 25/arch/i386/kernel/traps.c~nmi-trigger-switch-support-for-debuggingupdated 2004-07-26 16:37:41.185541728 -0700 +++ 25-akpm/arch/i386/kernel/traps.c 2004-07-26 16:37:41.198539752 -0700 @@ -496,6 +496,27 @@ static void unknown_nmi_error(unsigned c printk("Do you have a strange power saving mode enabled?\n"); } +static spinlock_t nmi_print_lock = SPIN_LOCK_UNLOCKED; + +void die_nmi (struct pt_regs *regs, const char *msg) +{ + spin_lock(&nmi_print_lock); + /* + * We are in trouble anyway, lets at least try + * to get a message out. + */ + bust_spinlocks(1); + printk(msg); + printk(" on CPU%d, eip %08lx, registers:\n", + smp_processor_id(), regs->eip); + show_registers(regs); + printk("console shuts up ...\n"); + console_silent(); + spin_unlock(&nmi_print_lock); + bust_spinlocks(0); + do_exit(SIGSEGV); +} + static void default_do_nmi(struct pt_regs * regs) { unsigned char reason = get_nmi_reason(); diff -puN Documentation/filesystems/proc.txt~nmi-trigger-switch-support-for-debuggingupdated Documentation/filesystems/proc.txt --- 25/Documentation/filesystems/proc.txt~nmi-trigger-switch-support-for-debuggingupdated 2004-07-26 16:37:41.187541424 -0700 +++ 25-akpm/Documentation/filesystems/proc.txt 2004-07-26 16:37:41.196540056 -0700 @@ -1109,6 +1109,23 @@ modprobe The location where the modprobe binary is located. The kernel uses this program to load modules on demand. +unknown_nmi_panic +----------------- + +The value in this file affects behavior of handling NMI. When the value is +non-zero, unknown NMI is trapped and then panic occurs. At that time, kernel +debugging information is displayed on console. + +NMI switch that most IA32 servers have fires unknown NMI up, for example. +If a system hangs up, try pressing the NMI switch. + +[NOTE] + This function and oprofile share a NMI callback. Therefore this function + cannot be enabled when oprofile is activated. + And NMI watchdog will be disabled when the value in this file is set to + non-zero. + + 2.4 /proc/sys/vm - The virtual memory subsystem ----------------------------------------------- diff -puN include/linux/sysctl.h~nmi-trigger-switch-support-for-debuggingupdated include/linux/sysctl.h --- 25/include/linux/sysctl.h~nmi-trigger-switch-support-for-debuggingupdated 2004-07-26 16:37:41.188541272 -0700 +++ 25-akpm/include/linux/sysctl.h 2004-07-26 16:37:41.198539752 -0700 @@ -133,6 +133,7 @@ enum KERN_NGROUPS_MAX=63, /* int: NGROUPS_MAX */ KERN_SPARC_SCONS_PWROFF=64, /* int: serial console power-off halt */ KERN_HZ_TIMER=65, /* int: hz timer on or off */ + KERN_UNKNOWN_NMI_PANIC=66, /* int: unknown nmi panic flag */ }; diff -puN kernel/sysctl.c~nmi-trigger-switch-support-for-debuggingupdated kernel/sysctl.c --- 25/kernel/sysctl.c~nmi-trigger-switch-support-for-debuggingupdated 2004-07-26 16:37:41.190540968 -0700 +++ 25-akpm/kernel/sysctl.c 2004-07-26 16:37:41.200539448 -0700 @@ -65,6 +65,12 @@ extern int min_free_kbytes; extern int printk_ratelimit_jiffies; extern int printk_ratelimit_burst; +#if defined(CONFIG_X86_LOCAL_APIC) +extern int unknown_nmi_panic; +extern int proc_unknown_nmi_panic(ctl_table *, int, struct file *, + void __user *, size_t *); +#endif + /* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */ static int maxolduid = 65535; static int minolduid; @@ -620,6 +626,16 @@ static ctl_table kern_table[] = { .mode = 0444, .proc_handler = &proc_dointvec, }, +#if defined(CONFIG_X86_LOCAL_APIC) + { + .ctl_name = KERN_UNKNOWN_NMI_PANIC, + .procname = "unknown_nmi_panic", + .data = &unknown_nmi_panic, + .maxlen = sizeof (int), + .mode = 0644, + .proc_handler = &proc_unknown_nmi_panic, + }, +#endif { .ctl_name = 0 } }; _