From: Matt Porter Merge Bubinga/405EP support against new OCP. --- 25-akpm/arch/ppc/configs/bubinga_defconfig | 593 +++++++++++++++++++++++++++++ 25-akpm/arch/ppc/platforms/4xx/bubinga.c | 263 ++++++++++++ 25-akpm/arch/ppc/platforms/4xx/bubinga.h | 69 +++ 25-akpm/arch/ppc/platforms/4xx/ibm405ep.c | 134 ++++++ 25-akpm/arch/ppc/platforms/4xx/ibm405ep.h | 148 +++++++ 5 files changed, 1207 insertions(+) diff -puN /dev/null arch/ppc/configs/bubinga_defconfig --- /dev/null 2003-09-15 06:40:47.000000000 -0700 +++ 25-akpm/arch/ppc/configs/bubinga_defconfig 2004-05-12 16:58:07.077088320 -0700 @@ -0,0 +1,593 @@ +# +# Automatically generated make config: don't edit +# +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +# CONFIG_STANDALONE is not set +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_HOTPLUG is not set +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +CONFIG_KMOD=y + +# +# Processor +# +# CONFIG_6xx is not set +CONFIG_40x=y +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +# CONFIG_8xx is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_CPU_FREQ is not set +CONFIG_4xx=y + +# +# IBM 4xx options +# +# CONFIG_ASH is not set +CONFIG_BUBINGA=y +# CONFIG_CPCI405 is not set +# CONFIG_EP405 is not set +# CONFIG_OAK is not set +# CONFIG_REDWOOD_5 is not set +# CONFIG_REDWOOD_6 is not set +# CONFIG_SYCAMORE is not set +# CONFIG_WALNUT is not set +CONFIG_IBM405_ERR77=y +CONFIG_IBM405_ERR51=y +CONFIG_IBM_OCP=y +CONFIG_BIOS_FIXUP=y +CONFIG_405EP=y +CONFIG_IBM_OPENBIOS=y +# CONFIG_PM is not set +CONFIG_UART0_TTYS0=y +# CONFIG_UART0_TTYS1 is not set +CONFIG_NOT_COHERENT_CACHE=y + +# +# Platform options +# +# CONFIG_PC_KEYBOARD is not set +# CONFIG_SMP is not set +# CONFIG_PREEMPT is not set +# CONFIG_HIGHMEM is not set +CONFIG_KERNEL_ELF=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_NAMES is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Device Drivers +# + +# +# Generic Driver Options +# + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_CARMEL is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_LBD is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_IPV6 is not set +# CONFIG_DECNET is not set +# CONFIG_BRIDGE is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_FASTROUTE is not set +# CONFIG_NET_HW_FLOWCONTROL is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +CONFIG_NETDEVICES=y + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_OAKNET is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +CONFIG_IBM_EMAC=y +# CONFIG_IBM_EMAC_ERRMSG is not set +CONFIG_IBM_EMAC_RXB=64 +CONFIG_IBM_EMAC_TXB=8 +CONFIG_IBM_EMAC_FGAP=8 +CONFIG_IBM_EMAC_SKBRES=0 +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set +# CONFIG_RCPCI is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set + +# +# Amateur Radio support +# +# CONFIG_HAMRADIO is not set + +# +# IrDA (infrared) support +# +# CONFIG_IRDA is not set + +# +# Bluetooth support +# +# CONFIG_BT is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PCIPS2 is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_QIC02_TAPE is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_FTAPE is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_FAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +# CONFIG_EXPORTFS is not set +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_INTERMEZZO_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_NEC98_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# IBM 40x options +# + +# +# Library routines +# +CONFIG_CRC32=y + +# +# Kernel hacking +# +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +CONFIG_PPC_OCP=y + +# +# Security options +# +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set diff -puN /dev/null arch/ppc/platforms/4xx/bubinga.c --- /dev/null 2003-09-15 06:40:47.000000000 -0700 +++ 25-akpm/arch/ppc/platforms/4xx/bubinga.c 2004-05-12 16:58:07.078088168 -0700 @@ -0,0 +1,263 @@ +/* + * Support for IBM PPC 405EP evaluation board (Bubinga). + * + * Author: SAW (IBM), derived from walnut.c. + * Maintained by MontaVista Software + * + * 2003 (c) MontaVista Softare Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#undef DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +extern bd_t __res; + +void *bubinga_rtc_base; + +/* Some IRQs unique to the board + * Used by the generic 405 PCI setup functions in ppc4xx_pci.c + */ +int __init +ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {28, 28, 28, 28}, /* IDSEL 1 - PCI slot 1 */ + {29, 29, 29, 29}, /* IDSEL 2 - PCI slot 2 */ + {30, 30, 30, 30}, /* IDSEL 3 - PCI slot 3 */ + {31, 31, 31, 31}, /* IDSEL 4 - PCI slot 4 */ + }; + + const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +}; + +/* The serial clock for the chip is an internal clock determined by + * different clock speeds/dividers. + * Calculate the proper input baud rate and setup the serial driver. + */ +static void __init +bubinga_early_serial_map(void) +{ + u32 uart_div; + int uart_clock; + struct uart_port port; + + /* Calculate the serial clock input frequency + * + * The base baud is the PLL OUTA (provided in the board info + * structure) divided by the external UART Divisor, divided + * by 16. + */ + uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV); + uart_clock = __res.bi_pllouta_freq / uart_div; + + /* Setup serial port access */ + memset(&port, 0, sizeof(port)); + port.membase = (void*)ACTING_UART0_IO_BASE; + port.irq = ACTING_UART0_INT; + port.uartclk = uart_clock; + port.regshift = 0; + port.iotype = SERIAL_IO_MEM; + port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + port.line = 0; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 0 failed\n"); + } + + port.membase = (void*)ACTING_UART1_IO_BASE; + port.irq = ACTING_UART1_INT; + port.line = 1; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 1 failed\n"); + } +} + +void __init +bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip) +{ + + unsigned int bar_response, bar; + /* + * Expected PCI mapping: + * + * PLB addr PCI memory addr + * --------------------- --------------------- + * 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff + * 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff + * + * PLB addr PCI io addr + * --------------------- --------------------- + * e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000 + * + * The following code is simplified by assuming that the bootrom + * has been well behaved in following this mapping. + */ + +#ifdef DEBUG + int i; + + printk("ioremap PCLIO_BASE = 0x%x\n", pcip); + printk("PCI bridge regs before fixup \n"); + for (i = 0; i <= 3; i++) { + printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma))); + printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la))); + printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila))); + printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha))); + } + printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms))); + printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la))); + printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms))); + printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la))); + +#endif + + /* added for IBM boot rom version 1.15 bios bar changes -AK */ + + /* Disable region first */ + out_le32((void *) &(pcip->pmm[0].ma), 0x00000000); + /* PLB starting addr, PCI: 0x80000000 */ + out_le32((void *) &(pcip->pmm[0].la), 0x80000000); + /* PCI start addr, 0x80000000 */ + out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE); + /* 512MB range of PLB to PCI */ + out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000); + /* Enable no pre-fetch, enable region */ + out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff - + (PPC405_PCI_UPPER_MEM - + PPC405_PCI_MEM_BASE)) | 0x01)); + + /* Disable region one */ + out_le32((void *) &(pcip->pmm[1].ma), 0x00000000); + out_le32((void *) &(pcip->pmm[1].la), 0x00000000); + out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000); + out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000); + out_le32((void *) &(pcip->pmm[1].ma), 0x00000000); + out_le32((void *) &(pcip->ptm1ms), 0x00000001); + + /* Disable region two */ + out_le32((void *) &(pcip->pmm[2].ma), 0x00000000); + out_le32((void *) &(pcip->pmm[2].la), 0x00000000); + out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000); + out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000); + out_le32((void *) &(pcip->pmm[2].ma), 0x00000000); + out_le32((void *) &(pcip->ptm2ms), 0x00000000); + out_le32((void *) &(pcip->ptm2la), 0x00000000); + + /* Zero config bars */ + for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) { + early_write_config_dword(hose, hose->first_busno, + PCI_FUNC(hose->first_busno), bar, + 0x00000000); + early_read_config_dword(hose, hose->first_busno, + PCI_FUNC(hose->first_busno), bar, + &bar_response); + DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n", + hose->first_busno, PCI_SLOT(hose->first_busno), + PCI_FUNC(hose->first_busno), bar, bar_response); + } + /* end work arround */ + +#ifdef DEBUG + printk("PCI bridge regs after fixup \n"); + for (i = 0; i <= 3; i++) { + printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma))); + printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la))); + printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila))); + printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha))); + } + printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms))); + printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la))); + printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms))); + printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la))); + +#endif +} + +void __init +bubinga_setup_arch(void) +{ + ppc4xx_setup_arch(); + + ibm_ocp_set_emac(0, 1); + + bubinga_early_serial_map(); + + /* RTC step for the evb405ep */ + bubinga_rtc_base = (void *) BUBINGA_RTC_VADDR; + TODC_INIT(TODC_TYPE_DS1743, bubinga_rtc_base, bubinga_rtc_base, + bubinga_rtc_base, 8); + /* Identify the system */ + printk("IBM Bubinga port (MontaVista Software, Inc. )\n"); +} + +void __init +bubinga_map_io(void) +{ + ppc4xx_map_io(); + io_block_mapping(BUBINGA_RTC_VADDR, + BUBINGA_RTC_PADDR, BUBINGA_RTC_SIZE, _PAGE_IO); +} + +void __init +platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + ppc4xx_init(r3, r4, r5, r6, r7); + + ppc_md.setup_arch = bubinga_setup_arch; + ppc_md.setup_io_mappings = bubinga_map_io; + +#ifdef CONFIG_GEN_RTC + ppc_md.time_init = todc_time_init; + ppc_md.set_rtc_time = todc_set_rtc_time; + ppc_md.get_rtc_time = todc_get_rtc_time; + ppc_md.nvram_read_val = todc_direct_read_val; + ppc_md.nvram_write_val = todc_direct_write_val; +#endif +#ifdef CONFIG_KGDB + ppc_md.early_serial_map = bubinga_early_serial_map; +#endif +} + diff -puN /dev/null arch/ppc/platforms/4xx/bubinga.h --- /dev/null 2003-09-15 06:40:47.000000000 -0700 +++ 25-akpm/arch/ppc/platforms/4xx/bubinga.h 2004-05-12 16:58:07.079088016 -0700 @@ -0,0 +1,69 @@ +/* + * Support for IBM PPC 405EP evaluation board (Bubinga). + * + * Author: SAW (IBM), derived from walnut.h. + * Maintained by MontaVista Software + * + * 2003 (c) MontaVista Softare Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifdef __KERNEL__ +#ifndef __BUBINGA_H__ +#define __BUBINGA_H__ + +/* 405EP */ +#include + +#ifndef __ASSEMBLY__ +/* + * Data structure defining board information maintained by the boot + * ROM on IBM's evaluation board. An effort has been made to + * keep the field names consistent with the 8xx 'bd_t' board info + * structures. + */ + +typedef struct board_info { + unsigned char bi_s_version[4]; /* Version of this structure */ + unsigned char bi_r_version[30]; /* Version of the IBM ROM */ + unsigned int bi_memsize; /* DRAM installed, in bytes */ + unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ + unsigned int bi_intfreq; /* Processor speed, in Hz */ + unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ + unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ + unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */ + unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */ +} bd_t; + +/* Some 4xx parts use a different timebase frequency from the internal clock. +*/ +#define bi_tbfreq bi_intfreq + + +/* Memory map for the Bubinga board. + * Generic 4xx plus RTC. + */ + +extern void *bubinga_rtc_base; +#define BUBINGA_RTC_PADDR ((uint)0xf0000000) +#define BUBINGA_RTC_VADDR BUBINGA_RTC_PADDR +#define BUBINGA_RTC_SIZE ((uint)8*1024) + +/* The UART clock is based off an internal clock - + * define BASE_BAUD based on the internal clock and divider(s). + * Since BASE_BAUD must be a constant, we will initialize it + * using clock/divider values which OpenBIOS initializes + * for typical configurations at various CPU speeds. + * The base baud is calculated as (FWDA / EXT UART DIV / 16) + */ +#define BASE_BAUD 0 + +#define BUBINGA_FPGA_BASE 0xF0300000 + +#define PPC4xx_MACHINE_NAME "IBM Bubinga" + +#endif /* !__ASSEMBLY__ */ +#endif /* __BUBINGA_H__ */ +#endif /* __KERNEL__ */ diff -puN /dev/null arch/ppc/platforms/4xx/ibm405ep.c --- /dev/null 2003-09-15 06:40:47.000000000 -0700 +++ 25-akpm/arch/ppc/platforms/4xx/ibm405ep.c 2004-05-12 16:58:07.080087864 -0700 @@ -0,0 +1,134 @@ +/* + * arch/ppc/platforms/ibm405ep.c + * + * Support for IBM PPC 405EP processors. + * + * Author: SAW (IBM), derived from ibmnp405l.c. + * Maintained by MontaVista Software + * + * 2003 (c) MontaVista Softare Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +static struct ocp_func_mal_data ibm405ep_mal0_def = { + .num_tx_chans = 4, /* Number of TX channels */ + .num_rx_chans = 2, /* Number of RX channels */ + .txeob_irq = 11, /* TX End Of Buffer IRQ */ + .rxeob_irq = 12, /* RX End Of Buffer IRQ */ + .txde_irq = 13, /* TX Descriptor Error IRQ */ + .rxde_irq = 14, /* RX Descriptor Error IRQ */ + .serr_irq = 10, /* MAL System Error IRQ */ +}; +OCP_SYSFS_MAL_DATA() + +static struct ocp_func_emac_data ibm405ep_emac0_def = { + .rgmii_idx = -1, /* No RGMII */ + .rgmii_mux = -1, /* No RGMII */ + .zmii_idx = -1, /* ZMII device index */ + .zmii_mux = 0, /* ZMII input of this EMAC */ + .mal_idx = 0, /* MAL device index */ + .mal_rx_chan = 0, /* MAL rx channel number */ + .mal_tx_chan = 0, /* MAL tx channel number */ + .wol_irq = 9, /* WOL interrupt number */ + .mdio_idx = 0, /* MDIO via EMAC0 */ + .tah_idx = -1, /* No TAH */ +}; + +static struct ocp_func_emac_data ibm405ep_emac1_def = { + .rgmii_idx = -1, /* No RGMII */ + .rgmii_mux = -1, /* No RGMII */ + .zmii_idx = -1, /* ZMII device index */ + .zmii_mux = 0, /* ZMII input of this EMAC */ + .mal_idx = 0, /* MAL device index */ + .mal_rx_chan = 1, /* MAL rx channel number */ + .mal_tx_chan = 2, /* MAL tx channel number */ + .wol_irq = 9, /* WOL interrupt number */ + .mdio_idx = 0, /* MDIO via EMAC0 */ + .tah_idx = -1, /* No TAH */ +}; +OCP_SYSFS_EMAC_DATA() + +static struct ocp_func_iic_data ibm405ep_iic0_def = { + .fast_mode = 0, /* Use standad mode (100Khz) */ +}; +OCP_SYSFS_IIC_DATA() + +struct ocp_def core_ocp[] = { + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_OPB, + .index = 0, + .paddr = 0xEF600000, + .irq = OCP_IRQ_NA, + .pm = OCP_CPM_NA, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 0, + .paddr = UART0_IO_BASE, + .irq = UART0_INT, + .pm = IBM_CPM_UART0 + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 1, + .paddr = UART1_IO_BASE, + .irq = UART1_INT, + .pm = IBM_CPM_UART1 + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_IIC, + .paddr = 0xEF600500, + .irq = 2, + .pm = IBM_CPM_IIC0, + .additions = &ibm405ep_iic0_def, + .show = &ocp_show_iic_data + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_GPIO, + .paddr = 0xEF600700, + .irq = OCP_IRQ_NA, + .pm = IBM_CPM_GPIO0 + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_MAL, + .paddr = OCP_PADDR_NA, + .irq = OCP_IRQ_NA, + .pm = OCP_CPM_NA, + .additions = &ibm405ep_mal0_def, + .show = &ocp_show_mal_data + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_EMAC, + .index = 0, + .paddr = EMAC0_BASE, + .irq = 15, + .pm = OCP_CPM_NA, + .additions = &ibm405ep_emac0_def, + .show = &ocp_show_emac_data + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_EMAC, + .index = 1, + .paddr = 0xEF600900, + .irq = 17, + .pm = OCP_CPM_NA, + .additions = &ibm405ep_emac1_def, + .show = &ocp_show_emac_data + }, + { .vendor = OCP_VENDOR_INVALID + } +}; diff -puN /dev/null arch/ppc/platforms/4xx/ibm405ep.h --- /dev/null 2003-09-15 06:40:47.000000000 -0700 +++ 25-akpm/arch/ppc/platforms/4xx/ibm405ep.h 2004-05-12 16:58:07.081087712 -0700 @@ -0,0 +1,148 @@ +/* + * arch/ppc/platforms/4xx/ibm405ep.h + * + * IBM PPC 405EP processor defines. + * + * Author: SAW (IBM), derived from ibm405gp.h. + * Maintained by MontaVista Software + * + * 2003 (c) MontaVista Softare Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_IBM405EP_H__ +#define __ASM_IBM405EP_H__ + +#include + +/* ibm405.h at bottom of this file */ + +/* PCI + * PCI Bridge config reg definitions + * see 17-19 of manual + */ + +#define PPC405_PCI_CONFIG_ADDR 0xeec00000 +#define PPC405_PCI_CONFIG_DATA 0xeec00004 + +#define PPC405_PCI_PHY_MEM_BASE 0x80000000 /* hose_a->pci_mem_offset */ + /* setbat */ +#define PPC405_PCI_MEM_BASE PPC405_PCI_PHY_MEM_BASE /* setbat */ +#define PPC405_PCI_PHY_IO_BASE 0xe8000000 /* setbat */ +#define PPC405_PCI_IO_BASE PPC405_PCI_PHY_IO_BASE /* setbat */ + +#define PPC405_PCI_LOWER_MEM 0x80000000 /* hose_a->mem_space.start */ +#define PPC405_PCI_UPPER_MEM 0xBfffffff /* hose_a->mem_space.end */ +#define PPC405_PCI_LOWER_IO 0x00000000 /* hose_a->io_space.start */ +#define PPC405_PCI_UPPER_IO 0x0000ffff /* hose_a->io_space.end */ + +#define PPC405_ISA_IO_BASE PPC405_PCI_IO_BASE + +#define PPC4xx_PCI_IO_PADDR ((uint)PPC405_PCI_PHY_IO_BASE) +#define PPC4xx_PCI_IO_VADDR PPC4xx_PCI_IO_PADDR +#define PPC4xx_PCI_IO_SIZE ((uint)64*1024) +#define PPC4xx_PCI_CFG_PADDR ((uint)PPC405_PCI_CONFIG_ADDR) +#define PPC4xx_PCI_CFG_VADDR PPC4xx_PCI_CFG_PADDR +#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024) +#define PPC4xx_PCI_LCFG_PADDR ((uint)0xef400000) +#define PPC4xx_PCI_LCFG_VADDR PPC4xx_PCI_LCFG_PADDR +#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024) +#define PPC4xx_ONB_IO_PADDR ((uint)0xef600000) +#define PPC4xx_ONB_IO_VADDR PPC4xx_ONB_IO_PADDR +#define PPC4xx_ONB_IO_SIZE ((uint)4*1024) + +/* serial port defines */ +#define RS_TABLE_SIZE 2 + +#define UART0_INT 0 +#define UART1_INT 1 + +#define PCIL0_BASE 0xEF400000 +#define UART0_IO_BASE 0xEF600300 +#define UART1_IO_BASE 0xEF600400 +#define EMAC0_BASE 0xEF600800 + +#define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i] + +#if defined(CONFIG_UART0_TTYS0) +#define ACTING_UART0_IO_BASE UART0_IO_BASE +#define ACTING_UART1_IO_BASE UART1_IO_BASE +#define ACTING_UART0_INT UART0_INT +#define ACTING_UART1_INT UART1_INT +#else +#define ACTING_UART0_IO_BASE UART1_IO_BASE +#define ACTING_UART1_IO_BASE UART0_IO_BASE +#define ACTING_UART0_INT UART1_INT +#define ACTING_UART1_INT UART0_INT +#endif + +#define STD_UART_OP(num) \ + { 0, BASE_BAUD, 0, ACTING_UART##num##_INT, \ + (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ + iomem_base: (u8 *)ACTING_UART##num##_IO_BASE, \ + io_type: SERIAL_IO_MEM}, + +#define SERIAL_DEBUG_IO_BASE ACTING_UART0_IO_BASE +#define SERIAL_PORT_DFNS \ + STD_UART_OP(0) \ + STD_UART_OP(1) + +/* DCR defines */ +#define DCRN_CPMSR_BASE 0x0BA +#define DCRN_CPMFR_BASE 0x0B9 + +#define DCRN_CPC0_PLLMR0_BASE 0x0F0 +#define DCRN_CPC0_BOOT_BASE 0x0F1 +#define DCRN_CPC0_CR1_BASE 0x0F2 +#define DCRN_CPC0_EPRCSR_BASE 0x0F3 +#define DCRN_CPC0_PLLMR1_BASE 0x0F4 +#define DCRN_CPC0_UCR_BASE 0x0F5 +#define DCRN_CPC0_UCR_U0DIV 0x07F +#define DCRN_CPC0_SRR_BASE 0x0F6 +#define DCRN_CPC0_JTAGID_BASE 0x0F7 +#define DCRN_CPC0_SPARE_BASE 0x0F8 +#define DCRN_CPC0_PCI_BASE 0x0F9 + + +#define IBM_CPM_GPT 0x80000000 /* GPT interface */ +#define IBM_CPM_PCI 0x40000000 /* PCI bridge */ +#define IBM_CPM_UIC 0x00010000 /* Universal Int Controller */ +#define IBM_CPM_CPU 0x00008000 /* processor core */ +#define IBM_CPM_EBC 0x00002000 /* EBC controller */ +#define IBM_CPM_SDRAM0 0x00004000 /* SDRAM memory controller */ +#define IBM_CPM_GPIO0 0x00001000 /* General Purpose IO */ +#define IBM_CPM_TMRCLK 0x00000400 /* CPU timers */ +#define IBM_CPM_PLB 0x00000100 /* PLB bus arbiter */ +#define IBM_CPM_OPB 0x00000080 /* PLB to OPB bridge */ +#define IBM_CPM_DMA 0x00000040 /* DMA controller */ +#define IBM_CPM_IIC0 0x00000010 /* IIC interface */ +#define IBM_CPM_UART1 0x00000002 /* serial port 0 */ +#define IBM_CPM_UART0 0x00000001 /* serial port 1 */ +#define DFLT_IBM4xx_PM ~(IBM_CPM_PCI | IBM_CPM_CPU | IBM_CPM_DMA \ + | IBM_CPM_OPB | IBM_CPM_EBC \ + | IBM_CPM_SDRAM0 | IBM_CPM_PLB \ + | IBM_CPM_UIC | IBM_CPM_TMRCLK) +#define DCRN_DMA0_BASE 0x100 +#define DCRN_DMA1_BASE 0x108 +#define DCRN_DMA2_BASE 0x110 +#define DCRN_DMA3_BASE 0x118 +#define DCRNCAP_DMA_SG 1 /* have DMA scatter/gather capability */ +#define DCRN_DMASR_BASE 0x120 +#define DCRN_EBC_BASE 0x012 +#define DCRN_DCP0_BASE 0x014 +#define DCRN_MAL_BASE 0x180 +#define DCRN_OCM0_BASE 0x018 +#define DCRN_PLB0_BASE 0x084 +#define DCRN_PLLMR_BASE 0x0B0 +#define DCRN_POB0_BASE 0x0A0 +#define DCRN_SDRAM0_BASE 0x010 +#define DCRN_UIC0_BASE 0x0C0 +#define UIC0 DCRN_UIC0_BASE + +#include + +#endif /* __ASM_IBM405EP_H__ */ +#endif /* __KERNEL__ */ _