From: Jim Hague It fixes the NULL pointer dereference and also a problem in pm2fb_blank(). --- 25-akpm/drivers/video/pm2fb.c | 54 ++++++++++++++++++++++++------------------ 1 files changed, 32 insertions(+), 22 deletions(-) diff -puN drivers/video/pm2fb.c~fix-null-ptr-dereference-in-pm2fb_probe-2 drivers/video/pm2fb.c --- 25/drivers/video/pm2fb.c~fix-null-ptr-dereference-in-pm2fb_probe-2 2004-04-25 21:59:25.723668568 -0700 +++ 25-akpm/drivers/video/pm2fb.c 2004-04-25 21:59:25.728667808 -0700 @@ -63,6 +63,16 @@ #endif /* + * The 2.4 driver calls reset_card() at init time, where it also sets the + * initial mode. I don't think the driver should touch the chip until + * the console sets a video mode. So I was calling this at the start + * of setting a mode. However, certainly on 1280x1024 depth 16 on my + * PCI Graphics Blaster Exxtreme this causes the display to smear + * slightly. I don't know why. Guesses to jim.hague@acm.org. + */ +#undef RESET_CARD_ON_MODE_SET + +/* * Driver data */ static char *mode __initdata = NULL; @@ -340,16 +350,7 @@ static void clear_palette(struct pm2fb_p } } -#if 0 -/* - * FIXME: - * The 2.4 driver calls this at init time, where it also sets the - * initial mode. I don't think the driver should touch the chip - * until the console sets a video mode. So I was calling this - * at the start of setting a mode. However, certainly on 1280x1024 - * depth 16 this causes the display to smear slightly. - * I don't know why. Guesses to jim.hague@acm.org. - */ +#ifdef RESET_CARD_ON_MODE_SET static void reset_card(struct pm2fb_par* p) { if (p->type == PM2_TYPE_PERMEDIA2V) @@ -501,6 +502,8 @@ static void set_video(struct pm2fb_par* u32 vsync; vsync = video; + + DPRINTK("video = 0x%x\n", video); /* * The hardware cursor needs +vsync to recognise vert retrace. @@ -660,6 +663,9 @@ static int pm2fb_set_par(struct fb_info u32 xres; int data64; +#ifdef RESET_CARD_ON_MODE_SET + reset_card(par); +#endif reset_config(par); clear_palette(par); @@ -721,8 +727,7 @@ static int pm2fb_set_par(struct fb_info info->fix.visual = (depth == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; - info->fix.line_length = - info->var.xres * ((info->var.bits_per_pixel + 7) >> 3); + info->fix.line_length = info->var.xres * depth / 8; info->cmap.len = 256; /* @@ -803,6 +808,8 @@ static int pm2fb_set_par(struct fb_info break; } set_pixclock(par, pixclock); + DPRINTK("Setting graphics mode at %dx%d depth %d\n", + info->var.xres, info->var.yres, info->var.bits_per_pixel); return 0; } @@ -843,7 +850,8 @@ static int pm2fb_setcolreg(unsigned regn * var->{color}.offset contains start of bitfield * var->{color}.length contains length of bitfield * {hardwarespecific} contains width of DAC - * cmap[X] is programmed to (X << red.offset) | (X << green.offset) | (X << blue.offset) + * cmap[X] is programmed to + * (X << red.offset) | (X << green.offset) | (X << blue.offset) * RAMDAC[X] is programmed to (red, green, blue) * * Pseudocolor: @@ -856,8 +864,9 @@ static int pm2fb_setcolreg(unsigned regn * does not use RAMDAC (usually has 3 of them). * var->{color}.offset contains start of bitfield * var->{color}.length contains length of bitfield - * cmap is programmed to (red << red.offset) | (green << green.offset) | - * (blue << blue.offset) | (transp << transp.offset) + * cmap is programmed to + * (red << red.offset) | (green << green.offset) | + * (blue << blue.offset) | (transp << transp.offset) * RAMDAC does not exist */ #define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16) @@ -962,6 +971,11 @@ static int pm2fb_blank(int blank_mode, s struct pm2fb_par *par = (struct pm2fb_par *) info->par; u32 video = par->video; + DPRINTK("blank_mode %d\n", blank_mode); + + /* Turn everything on, then disable as requested. */ + video |= (PM2F_VIDEO_ENABLE | PM2F_HSYNC_MASK | PM2F_VSYNC_MASK); + switch (blank_mode) { case 0: /* Screen: On; HSync: On, VSync: On */ break; @@ -1030,15 +1044,12 @@ static int __devinit pm2fb_probe(struct return err; } - size = sizeof(struct fb_info) + sizeof(struct pm2fb_par) + 256 * sizeof(u32); - + size = sizeof(struct pm2fb_par) + 256 * sizeof(u32); info = framebuffer_alloc(size, &pdev->dev); if ( !info ) return -ENOMEM; - memset(info, 0, size); - - default_par = info->par; - + default_par = (struct pm2fb_par *) info->par; + switch (pdev->device) { case PCI_DEVICE_ID_TI_TVP4020: strcpy(pm2fb_fix.id, "TVP4020"); @@ -1112,7 +1123,6 @@ static int __devinit pm2fb_probe(struct info->fbops = &pm2fb_ops; info->fix = pm2fb_fix; - info->par = default_par; info->pseudo_palette = (void *)(default_par + 1); info->flags = FBINFO_FLAG_DEFAULT; _