bk://kernel.bkbits.net/gregkh/linux/usb-2.6
greg@kroah.com|ChangeSet|20040429174750|05616 greg
# This is a BitKeeper generated diff -Nru style patch.
#
# ChangeSet
# 2004/04/29 16:00:47-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-usb
#
# include/linux/pci_ids.h
# 2004/04/29 16:00:44-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# MAINTAINERS
# 2004/04/29 16:00:44-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/04/29 10:47:50-07:00 greg@kroah.com
# USB: fix build error in hci_usb driver due to urb reference count change.
#
# This really needs to get fixed the proper way, by making the urb allocation
# dynamic in the driver, instead of the hack it is currently doing...
#
# drivers/bluetooth/hci_usb.c
# 2004/04/29 03:47:26-07:00 greg@kroah.com +1 -1
# USB: fix build error in hci_usb driver due to urb reference count change.
#
# This really needs to get fixed the proper way, by making the urb allocation
# dynamic in the driver, instead of the hack it is currently doing...
#
# ChangeSet
# 2004/04/29 10:40:57-07:00 greg@kroah.com
# USB: remove the wait_for_urb function from bfusb driver as it's no longer needed.
#
# drivers/bluetooth/bfusb.c
# 2004/04/29 03:40:30-07:00 greg@kroah.com +0 -9
# USB: remove the wait_for_urb function from bfusb driver as it's no longer needed.
#
# ChangeSet
# 2004/04/28 21:43:38-07:00 sean@mess.org
# [PATCH] USB: fix PhidgetServo driver
#
# Somehow I managed to send the wrong version. Here is a patch which fixes
# that. (Remove a dev_info() which wasn't supposed to be there, and make sure
# that everything is still consistent in the unlikely event that kmalloc()
# fails). Just minor cleanups.
#
# drivers/usb/misc/phidgetservo.c
# 2004/04/28 17:35:09-07:00 sean@mess.org +14 -17
# USB: fix PhidgetServo driver
#
# ChangeSet
# 2004/04/28 13:38:52-07:00 akpm@bix.(none)
# Merge bk://kernel.bkbits.net/gregkh/linux/usb-2.6
# into bix.(none):/usr/src/bk-usb
#
# drivers/usb/input/hid-core.c
# 2004/04/28 13:38:49-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/04/28 13:25:14-07:00 david-b@pacbell.net
# [PATCH] USB: fix sparc64 2.6.6-rc2-mm2 build busted: usb/core/hub.c hubstatus
#
# > 2) An undefined 'hubstatus' variable in drivers/usb/core/hub.c:
# >
# > CC drivers/usb/core/hub.o
# > drivers/usb/core/hub.c: In function `hub_port_connect_change':
# > drivers/usb/core/hub.c:1343: error: `hubstatus' undeclared (first use in this function)
# > drivers/usb/core/hub.c:1343: error: (Each undeclared identifier is reported only once
# > drivers/usb/core/hub.c:1343: error: for each function it appears in.)
# > make[3]: *** [drivers/usb/core/hub.o] Error 1
# >
# > As a total shot in the dark, the following fixes the build (I've no clue
# > if it is the right fix):
#
# Yes, it's the right fix. Greg, please merge the attached patch,
# which will be needed on any big-endian system.
#
# drivers/usb/core/hub.c
# 2004/04/27 01:19:29-07:00 david-b@pacbell.net +1 -1
# USB: fix sparc64 2.6.6-rc2-mm2 build busted: usb/core/hub.c hubstatus
#
# ChangeSet
# 2004/04/28 11:52:21-07:00 stern@rowland.harvard.edu
# [PATCH] USB: Lock devices during tree traversal
#
# On Tue, 27 Apr 2004, Greg KH wrote:
#
# > So, what's next in this patch series? :)
#
# Funny you should ask...
#
# While writing those patches I noted a problem, that the USB device tree
# can change while a process reading /proc/bus/usb/devices is traversing it,
# leading to an oops when a pointer to a no-longer-existing child device is
# dereferenced. The ensuing discussion led to the conclusion that the
# devices' ->serialize locks should be acquired, top-down, while going
# through the tree.
#
# That means changing the code that populates the devices file and changing
# the code that adds and removes USB device structures. This patch takes
# care of the first part. I'm delaying the second part because that section
# of usbcore is still under change -- David Brownell's revisions have not
# yet been fully integrated.
#
# A similar change should be made to usb_find_device() and match_device() in
# usb.c. You may want to add that yourself.
#
# drivers/usb/core/devices.c
# 2004/04/28 06:48:48-07:00 stern@rowland.harvard.edu +10 -2
# USB: Lock devices during tree traversal
#
# ChangeSet
# 2004/04/28 11:51:52-07:00 sean@mess.org
# [PATCH] USB: add new USB PhidgetServo driver
#
# Here is a driver for the usb servo controllers from Phidgets
# , using sysfs.
#
# Note that the devices claim to be hid devices, so I've added them to the
# hid_blacklist (HID_QUIRK_IGNORE). A servo controller isn't really an hid
# device (or is it?).
#
# drivers/usb/misc/Makefile
# 2004/04/21 09:02:00-07:00 sean@mess.org +1 -0
# USB: add new USB PhidgetServo driver
#
# drivers/usb/misc/Kconfig
# 2004/04/21 09:02:00-07:00 sean@mess.org +12 -0
# USB: add new USB PhidgetServo driver
#
# drivers/usb/input/hid-core.c
# 2004/04/22 02:54:25-07:00 sean@mess.org +12 -0
# USB: add new USB PhidgetServo driver
#
# drivers/usb/Makefile
# 2004/04/21 09:02:00-07:00 sean@mess.org +1 -0
# USB: add new USB PhidgetServo driver
#
# drivers/usb/misc/phidgetservo.c
# 2004/04/27 04:03:07-07:00 sean@mess.org +330 -0
# USB: add new USB PhidgetServo driver
#
# drivers/usb/misc/phidgetservo.c
# 2004/04/27 04:03:07-07:00 sean@mess.org +0 -0
# BitKeeper file /home/greg/linux/BK/usb-2.6/drivers/usb/misc/phidgetservo.c
#
# ChangeSet
# 2004/04/27 19:39:13-07:00 akpm@bix.(none)
# Merge bk://kernel.bkbits.net/gregkh/linux/usb-2.6
# into bix.(none):/usr/src/bk-usb
#
# include/linux/usb.h
# 2004/04/27 19:39:10-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/usb/core/usb.c
# 2004/04/27 19:39:10-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/usb/core/message.c
# 2004/04/27 19:39:10-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/04/27 17:33:52-07:00 greg@kroah.com
# USB: fix compiler warnings in devices.c file.
#
# drivers/usb/core/devices.c
# 2004/04/27 10:33:12-07:00 greg@kroah.com +2 -2
# USB: fix compiler warnings in devices.c file.
#
# ChangeSet
# 2004/04/27 16:02:32-07:00 stern@rowland.harvard.edu
# [PATCH] USB: Allocate interface structures dynamically
#
# This is a revised version of an earlier patch; I feel a lot better about
# this one. Basically it does the same thing as before: allocate
# interfaces dynamically to avoid the problems with reusing them.
#
# The difference is that this patch adds a struct kref to the array of
# usb_interface_cache's, so the array can persist if needed after the
# device has been disconnected. Each interface takes a reference to it
# (along with the configuration itself), so as long as the interfaces
# remain pinned in memory the altsettings will also remain.
#
# Here is a slight revision of patch as246b. This one allocates all the new
# interfaces before changing any other state; otherwise it's the same.
#
# include/linux/usb.h
# 2004/04/15 07:43:58-07:00 stern@rowland.harvard.edu +38 -3
# USB: Allocate interface structures dynamically
#
# drivers/usb/core/usb.c
# 2004/04/15 05:19:20-07:00 stern@rowland.harvard.edu +1 -1
# USB: Allocate interface structures dynamically
#
# drivers/usb/core/message.c
# 2004/04/15 05:28:25-07:00 stern@rowland.harvard.edu +46 -13
# USB: Allocate interface structures dynamically
#
# drivers/usb/core/devices.c
# 2004/04/15 05:21:07-07:00 stern@rowland.harvard.edu +19 -12
# USB: Allocate interface structures dynamically
#
# drivers/usb/core/config.c
# 2004/04/15 07:45:41-07:00 stern@rowland.harvard.edu +31 -44
# USB: Allocate interface structures dynamically
#
# ChangeSet
# 2004/04/27 15:22:05-07:00 greg@kroah.com
# USB: fix incorrect usb-serial conversion for cur_altsetting from previous patch.
#
# drivers/usb/serial/usb-serial.c
# 2004/04/27 08:21:23-07:00 greg@kroah.com +1 -1
# USB: fix incorrect usb-serial conversion for cur_altsetting from previous patch.
#
# ChangeSet
# 2004/04/27 14:45:49-07:00 greg@kroah.com
# USB: make ehci driver use a kref instead of an atomic_t
#
# drivers/usb/host/ehci.h
# 2004/04/27 14:45:32-07:00 greg@kroah.com +2 -1
# USB: make ehci driver use a kref instead of an atomic_t
#
# drivers/usb/host/ehci-sched.c
# 2004/04/27 14:45:32-07:00 greg@kroah.com +3 -3
# USB: make ehci driver use a kref instead of an atomic_t
#
# drivers/usb/host/ehci-q.c
# 2004/04/27 14:45:32-07:00 greg@kroah.com +5 -5
# USB: make ehci driver use a kref instead of an atomic_t
#
# drivers/usb/host/ehci-mem.c
# 2004/04/27 14:45:32-07:00 greg@kroah.com +23 -16
# USB: make ehci driver use a kref instead of an atomic_t
#
# drivers/usb/host/ehci-hcd.c
# 2004/04/27 14:45:32-07:00 greg@kroah.com +1 -1
# USB: make ehci driver use a kref instead of an atomic_t
#
# ChangeSet
# 2004/04/27 14:21:13-07:00 greg@kroah.com
# USB: removed unused atomic_t in keyspan driver structure.
#
# drivers/usb/serial/keyspan.c
# 2004/04/27 07:20:12-07:00 greg@kroah.com +0 -3
# USB: removed unused atomic_t in keyspan driver structure.
#
# ChangeSet
# 2004/04/26 18:31:48-07:00 akpm@bix.(none)
# Merge bk://kernel.bkbits.net/gregkh/linux/usb-2.6
# into bix.(none):/usr/src/bk-usb
#
# include/linux/usb.h
# 2004/04/26 18:31:45-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/usb/core/usb.c
# 2004/04/26 18:31:45-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/04/26 17:07:28-07:00 greg@kroah.com
# USB: switch struct urb to use a kref instead of it's own atomic_t
#
# include/linux/usb.h
# 2004/04/26 10:06:52-07:00 greg@kroah.com +2 -1
# USB: switch struct urb to use a kref instead of it's own atomic_t
#
# drivers/usb/core/urb.c
# 2004/04/26 10:06:52-07:00 greg@kroah.com +13 -8
# USB: switch struct urb to use a kref instead of it's own atomic_t
#
# ChangeSet
# 2004/04/26 16:11:11-07:00 mdharm-usb@one-eyed-alien.net
# [PATCH] USB: usb-storage driver changes for 2.6.x [4/4]
#
# This is a trivial patch to remove some duplicate includes. sched.h and
# errno.h are already included in this file about a dozen lines or so above
# this point.
#
# drivers/usb/storage/usb.c
# 2004/04/24 19:25:23-07:00 mdharm-usb@one-eyed-alien.net +0 -2
# USB: usb-storage driver changes for 2.6.x [4/4]
#
# ChangeSet
# 2004/04/26 16:10:49-07:00 mdharm-usb@one-eyed-alien.net
# [PATCH] USB: usb-storage driver changes for 2.6.x [3/4]
#
# This patch adds some clear-halt calls if a GetMaxLUN fails. Apparently,
# some devices (like certain early-rev Zip100s) stall their bulk pipes if
# they receive a GetMaxLUN.
#
# drivers/usb/storage/transport.c
# 2004/04/24 19:25:32-07:00 mdharm-usb@one-eyed-alien.net +11 -0
# USB: usb-storage driver changes for 2.6.x [3/4]
#
# ChangeSet
# 2004/04/26 16:10:25-07:00 mdharm-usb@one-eyed-alien.net
# [PATCH] USB: usb-storage driver changes for 2.6.x [2/4]
#
# This is patch as248b from Alan Stern, modified by myself: This adds a flag
# which allows us to supress the "unneeded unusual_devs.h entry" message.
# This is useful for times when idiotic device manufacturers break the rules
# and release two different devices with the same VID, PID, and revision
# number.
#
# drivers/usb/storage/usb.h
# 2004/04/24 19:25:41-07:00 mdharm-usb@one-eyed-alien.net +1 -0
# USB: usb-storage driver changes for 2.6.x [2/4]
#
# drivers/usb/storage/usb.c
# 2004/04/24 19:25:41-07:00 mdharm-usb@one-eyed-alien.net +1 -1
# USB: usb-storage driver changes for 2.6.x [2/4]
#
# drivers/usb/storage/unusual_devs.h
# 2004/04/24 19:25:41-07:00 mdharm-usb@one-eyed-alien.net +1 -1
# USB: usb-storage driver changes for 2.6.x [2/4]
#
# ChangeSet
# 2004/04/26 16:10:02-07:00 mdharm-usb@one-eyed-alien.net
# [PATCH] USB: usb-storage driver changes for 2.6.x [1/4]
#
# Patch as239b from Alan Stern: This patch improves the interaction between
# a SCSI reset, an internally generated reset, and an abort. This improves
# our error-recovery in cases where the device is hung (or almost hung) while
# we're trying to auto-reset.
#
# drivers/usb/storage/usb.h
# 2004/04/24 19:25:50-07:00 mdharm-usb@one-eyed-alien.net +3 -2
# USB: usb-storage driver changes for 2.6.x [1/4]
#
# drivers/usb/storage/transport.c
# 2004/04/24 19:25:50-07:00 mdharm-usb@one-eyed-alien.net +26 -21
# USB: usb-storage driver changes for 2.6.x [1/4]
#
# drivers/usb/storage/scsiglue.c
# 2004/04/24 19:25:50-07:00 mdharm-usb@one-eyed-alien.net +11 -8
# USB: usb-storage driver changes for 2.6.x [1/4]
#
# ChangeSet
# 2004/04/26 16:09:34-07:00 stern@rowland.harvard.edu
# [PATCH] USB: Altsetting updates for usb/serial
#
# The updates needed for proper altsetting handling among the USB serial
# drivers turned out to be a lot easier than I expected, thanks to the
# organization of the drivers. Only a handful of changes were needed.
#
# drivers/usb/serial/usb-serial.c
# 2004/04/26 07:38:00-07:00 stern@rowland.harvard.edu +1 -1
# USB: Altsetting updates for usb/serial
#
# drivers/usb/serial/safe_serial.c
# 2004/04/26 07:38:00-07:00 stern@rowland.harvard.edu +1 -1
# USB: Altsetting updates for usb/serial
#
# drivers/usb/serial/kobil_sct.c
# 2004/04/26 07:38:00-07:00 stern@rowland.harvard.edu +1 -1
# USB: Altsetting updates for usb/serial
#
# drivers/usb/serial/io_ti.c
# 2004/04/26 07:38:00-07:00 stern@rowland.harvard.edu +1 -1
# USB: Altsetting updates for usb/serial
#
# ChangeSet
# 2004/04/26 16:09:06-07:00 baldrick@free.fr
# [PATCH] USB: be assertive in usbfs
#
# Be assertive.
#
# drivers/usb/core/devio.c
# 2004/04/26 06:48:28-07:00 baldrick@free.fr +2 -2
# USB: be assertive in usbfs
#
# ChangeSet
# 2004/04/26 16:08:38-07:00 bellucda@tiscali.it
# [PATCH] USB: audits in usb_init()
#
# there were some missing audits in usb_init()
#
# drivers/usb/core/usb.c
# 2004/04/26 14:55:56-07:00 bellucda@tiscali.it +26 -6
# USB: audits in usb_init()
#
# ChangeSet
# 2004/04/26 16:08:12-07:00 tejohnson@yahoo.com
# [PATCH] USB: mtouchusb update for 2.6.6-rc2
#
# The attached patch for the 3M Touch Systems Capacitive controller.
#
# Quick list of changes:
#
# * Changed reset from standard USB dev reset to vendor reset
# * Changed data sent to host from compensated to raw coordinates
# * Eliminated vendor/product module params
# * Performed multiple successfull tests with an EXII-5010UC
#
# The changes are primarily due to comments from Vojtech Pavlik, as well
# as making the newer EXII-50XXUC controllers work.
#
# Thanks to 3M Touch Systems for sending me some new controllers to test with!
#
# An updated HOWTO is also available at:
#
#
# http://groomlakelabs.com/grandamp/code/microtouch/Linux-Input-USB-Touchscreen-HowTo.txt
#
# drivers/usb/input/mtouchusb.c
# 2004/04/25 12:16:01-07:00 tejohnson@yahoo.com +35 -72
# USB: mtouchusb update for 2.6.6-rc2
#
# Documentation/usb/mtouchusb.txt
# 2004/04/25 12:16:49-07:00 tejohnson@yahoo.com +42 -51
# USB: mtouchusb update for 2.6.6-rc2
#
# ChangeSet
# 2004/04/25 23:06:05-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-usb
#
# include/linux/pci_ids.h
# 2004/04/25 23:06:02-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/04/24 23:51:05-07:00 akpm@bix.(none)
# Merge bk://kernel.bkbits.net/gregkh/linux/usb-2.6
# into bix.(none):/usr/src/bk-usb
#
# drivers/usb/core/usb.c
# 2004/04/24 23:51:02-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/04/23 16:41:30-07:00 stern@rowland.harvard.edu
# [PATCH] USB: Altsetting update for USB net drivers
#
# The only driver under usb/net that needed any altsetting changes was
# usbnet. I'm not looking forward to going through all the source files
# under usb/serial. :-(
#
# drivers/usb/net/usbnet.c
# 2004/04/22 09:56:28-07:00 stern@rowland.harvard.edu +4 -4
# USB: Altsetting update for USB net drivers
#
# ChangeSet
# 2004/04/23 16:41:04-07:00 stern@rowland.harvard.edu
# [PATCH] USB: Altsetting update for USB misc drivers
#
# This is the altsetting update for the drivers under usb/misc. As you can,
# not much was needed at all.
#
# drivers/usb/misc/uss720.c
# 2004/04/22 09:08:37-07:00 stern@rowland.harvard.edu +1 -1
# USB: Altsetting update for USB misc drivers
#
# drivers/usb/misc/legousbtower.c
# 2004/04/22 09:01:26-07:00 stern@rowland.harvard.edu +1 -1
# USB: Altsetting update for USB misc drivers
#
# ChangeSet
# 2004/04/23 16:40:35-07:00 stern@rowland.harvard.edu
# [PATCH] USB: Altsetting updates for USB media drivers
#
# This patch implements the new altsetting regime for the drivers under
# usb/media. Not much needed to be changed. I'm unable to test any of the
# changes, but at least they compile all right (except that I didn't even
# try to compile the pwc driver since it's marked BROKEN).
#
# The stv680 and w9968cf drivers still include an assumption that they are
# bound to interface number 0. Since that the drivers are fairly tightly
# linked to a specific kind of device I didn't try to change those
# assumptions, but maybe they should be changed.
#
# drivers/usb/media/vicam.c
# 2004/04/22 04:41:49-07:00 stern@rowland.harvard.edu +1 -1
# USB: Altsetting updates for USB media drivers
#
# drivers/usb/media/ultracam.c
# 2004/04/21 09:26:45-07:00 stern@rowland.harvard.edu +4 -3
# USB: Altsetting updates for USB media drivers
#
# drivers/usb/media/se401.c
# 2004/04/21 09:21:19-07:00 stern@rowland.harvard.edu +1 -1
# USB: Altsetting updates for USB media drivers
#
# drivers/usb/media/pwc-if.c
# 2004/04/21 09:18:47-07:00 stern@rowland.harvard.edu +5 -2
# USB: Altsetting updates for USB media drivers
#
# drivers/usb/media/ov511.c
# 2004/04/22 04:40:56-07:00 stern@rowland.harvard.edu +11 -3
# USB: Altsetting updates for USB media drivers
#
# drivers/usb/media/konicawc.c
# 2004/04/21 09:41:57-07:00 stern@rowland.harvard.edu +12 -5
# USB: Altsetting updates for USB media drivers
#
# drivers/usb/media/ibmcam.c
# 2004/04/21 09:32:00-07:00 stern@rowland.harvard.edu +5 -4
# USB: Altsetting updates for USB media drivers
#
# ChangeSet
# 2004/04/23 16:40:06-07:00 stern@rowland.harvard.edu
# [PATCH] USB: Cosmetic improvements for the UHCI driver
#
# This patch makes a few minor improvements to the appearance of the UHCI
# driver. Please apply.
#
# drivers/usb/host/uhci-hcd.h
# 2004/04/19 04:05:56-07:00 stern@rowland.harvard.edu +7 -7
# USB: Cosmetic improvements for the UHCI driver
#
# drivers/usb/host/uhci-hcd.c
# 2004/04/14 03:19:54-07:00 stern@rowland.harvard.edu +10 -10
# USB: Cosmetic improvements for the UHCI driver
#
# ChangeSet
# 2004/04/23 16:39:38-07:00 stern@rowland.harvard.edu
# [PATCH] USB: Ignore URB_NO_INTERRUPT flag in UHCI
#
# Following a suggestion of David Brownell's I have decided to remove
# support for the URB_NO_INTERRUPT flag in the UHCI driver. The overall
# effect of the flag is to reduce the number of interrupts, thereby
# improving throughput somewhat while increasing the duration of the
# remaining IRQ handlers quite a lot (i.e., increasing interrupt variance).
# So I think we're better off without it. Mind you, this is all in the
# absence of any firm measurements.
#
# A common case where this will come up is during usb-storage bulk
# transfers. Such transfers are generally divided into scatter-gather
# components each corresponding to a single URB and transferring one memory
# page (4 KB). While generating an interrupt for each one is a little
# faster than ideal -- about every 3 ms -- it's better than waiting until 64
# KB has been transferred and there are 1024 individual TDs to clean up
# during the IRQ.
#
# drivers/usb/host/uhci-hcd.c
# 2004/04/16 04:02:37-07:00 stern@rowland.harvard.edu +7 -3
# USB: Ignore URB_NO_INTERRUPT flag in UHCI
#
# ChangeSet
# 2004/04/23 16:20:26-07:00 baldrick@free.fr
# [PATCH] USB usbfs: drop pointless racy check
#
# The check of interface->dev.driver requires a lock to be taken
# to protect against driver binding changes. But in fact I think it
# is better just to drop the test. The result is that the caller is
# required to claim an interface before changing the altsetting,
# which is consistent with the other routines that operate on
# interfaces.
#
# devio.c | 6 ++----
# 1 files changed, 2 insertions(+), 4 deletions(-)
#
# drivers/usb/core/devio.c
# 2004/04/14 05:18:37-07:00 baldrick@free.fr +2 -4
# USB usbfs: drop pointless racy check
#
# ChangeSet
# 2004/04/23 16:20:07-07:00 baldrick@free.fr
# [PATCH] USB usbfs: missing lock in proc_getdriver
#
# Hi Oliver,
#
# > I expect it to rarely matter, but it might matter now and then. It's
# > just a question of hygiene. If you are using a temporary buffer I'd
# > like to see it used to full advantage. So either drop the lock or do
# > a direct copy. I'd prefer the first option your patch implemented.
#
# I agree. Greg, please consider applying the updated patch:
#
#
#
# Protect against driver binding changes while reading the driver name.
#
# drivers/usb/core/devio.c
# 2004/04/14 07:03:12-07:00 baldrick@free.fr +6 -4
# USB usbfs: missing lock in proc_getdriver
#
# ChangeSet
# 2004/04/23 16:19:43-07:00 baldrick@free.fr
# [PATCH] USB usbfs: destroy submitted urbs only on the disconnected interface
#
# The remaining three patches contain miscellaneous fixes to usbfs.
# This one fixes up the disconnect callback to only shoot down urbs
# on the disconnected interface, and not on all interfaces. It also adds
# a sanity check (this check is pointless because the interface could
# never have been claimed in the first place if it failed, but I feel better
# having it there).
#
# devio.c | 6 ++++--
# 1 files changed, 4 insertions(+), 2 deletions(-)
#
# drivers/usb/core/devio.c
# 2004/04/14 05:18:20-07:00 baldrick@free.fr +4 -2
# USB usbfs: destroy submitted urbs only on the disconnected interface
#
# ChangeSet
# 2004/04/23 16:19:14-07:00 baldrick@free.fr
# [PATCH] USB usbfs: fix up releaseintf
#
# The semaphore is now taken in the callers.
#
# devio.c | 2 --
# 1 files changed, 2 deletions(-)
#
# drivers/usb/core/devio.c
# 2004/04/14 05:18:08-07:00 baldrick@free.fr +0 -2
# USB usbfs: fix up releaseintf
#
# ChangeSet
# 2004/04/23 16:18:50-07:00 baldrick@free.fr
# [PATCH] USB usbfs: fix up proc_ioctl
#
# The semaphore is now taken in the caller.
#
# devio.c | 2 --
# 1 files changed, 2 deletions(-)
#
# drivers/usb/core/devio.c
# 2004/04/14 05:17:56-07:00 baldrick@free.fr +0 -2
# USB usbfs: fix up proc_ioctl
#
# ChangeSet
# 2004/04/23 16:18:24-07:00 baldrick@free.fr
# [PATCH] USB usbfs: fix up proc_setconfig
#
# The semaphore is now taken in the caller.
#
# devio.c | 2 --
# 1 files changed, 2 deletions(-)
#
# drivers/usb/core/devio.c
# 2004/04/14 05:17:46-07:00 baldrick@free.fr +0 -2
# USB usbfs: fix up proc_setconfig
#
# ChangeSet
# 2004/04/23 16:17:59-07:00 baldrick@free.fr
# [PATCH] USB usbfs: remove obsolete comment from proc_resetdevice
#
# devio.c | 3 ---
# 1 files changed, 3 deletions(-)
#
# drivers/usb/core/devio.c
# 2004/04/14 05:17:37-07:00 baldrick@free.fr +0 -3
# USB usbfs: remove obsolete comment from proc_resetdevice
#
# ChangeSet
# 2004/04/23 16:17:35-07:00 baldrick@free.fr
# [PATCH] USB usbfs: replace the per-file semaphore with the per-device semaphore
#
# devio.c | 43 +++++++++++++++++++++++--------------------
# usbdevice_fs.h | 1 -
# 2 files changed, 23 insertions(+), 21 deletions(-)
#
# include/linux/usbdevice_fs.h
# 2004/04/14 05:34:00-07:00 baldrick@free.fr +0 -1
# USB usbfs: replace the per-file semaphore with the per-device semaphore
#
# drivers/usb/core/devio.c
# 2004/04/14 05:17:29-07:00 baldrick@free.fr +23 -20
# USB usbfs: replace the per-file semaphore with the per-device semaphore
#
# ChangeSet
# 2004/04/23 16:17:09-07:00 baldrick@free.fr
# [PATCH] USB usbfs: take a reference to the usb device
#
# Hi Greg, this is the first of a series of patches that replace the
# per-file semaphore ps->devsem with the per-device semaphore
# ps->dev->serialize. The role of devsem was to protect against
# device disconnection. This can be done equally well using
# ps->dev->serialize. On the other hand, ps->dev->serialize
# protects against configuration and other changes, and has
# already been introduced into usbfs in several places. Using
# just one semaphore simplifies the code and removes some
# remaining race conditions. It should also fix the oopses some
# people have been seeing. In this first patch, a reference is
# taken to the usb device as long as the usbfs file is open. That
# way we can use ps->dev->serialize for as long as ps exists.
#
# devio.c | 27 ++++++++++++++++-----------
# inode.c | 3 ---
# 2 files changed, 16 insertions(+), 14 deletions(-)
#
# drivers/usb/core/inode.c
# 2004/04/14 05:15:29-07:00 baldrick@free.fr +0 -3
# USB usbfs: take a reference to the usb device
#
# drivers/usb/core/devio.c
# 2004/04/14 05:15:29-07:00 baldrick@free.fr +16 -11
# USB usbfs: take a reference to the usb device
#
# ChangeSet
# 2004/04/23 15:45:24-07:00 david-b@pacbell.net
# [PATCH] USB: khubd fixes
#
# This goes on top of the other enumeration patch I just sent,
# to handle some dubious and/or broken hub configurations better.
#
#
# Make khubd handle some cases better:
#
# - Track power budget for bus-powered hubs. This version only warns
# when the budgets are exceeded. Eventually, the budgets should help
# prevent such errors.
#
# - Rejects illegal USB setup: two consecutive bus powered hubs
# would exceed the voltage drop budget, causing much flakiness.
#
# - For hosts with high speed hubs, warn when devices are hooked up
# to full speed hubs if they'd be faster on a high speed one.
#
# - For hubs that don't do power switching, don't try to use it
#
# - For hubs that aren't self-powered, don't report local power status
#
# drivers/usb/core/hub.h
# 2004/04/19 08:29:02-07:00 david-b@pacbell.net +2 -0
# USB: khubd fixes
#
# drivers/usb/core/hub.c
# 2004/04/20 20:44:45-07:00 david-b@pacbell.net +143 -15
# USB: khubd fixes
#
# ChangeSet
# 2004/04/23 15:44:57-07:00 david-b@pacbell.net
# [PATCH] USB: re-factor enumeration logic
#
# This is an update to some patches from the December/January
# timeframe, which will help sort out some of the mess for
# drivers that need to use the reset logic. It's one of the
# last significant patches in my gadget-2.6 tree that haven't
# yet been merged into the main kernel tree.
#
#
# More refactoring of the enumeration code paths:
#
# * The first half of usb_new_device() becomes the second half of a new
# hub_port_init() routine (resets, sets address, gets descriptor)
#
# * The middle chunk of hub_port_connect_change() becomes the first half
# of that new hub_port_init() routine.
#
# * Khubd uses that new routine in hub_port_connect_change().
#
# * Now usb_new_device() cleans up better after faults, and has
# a more useful locking policy (caller owns dev->serialize).
#
# * Has related minor cleanups including commenting some of
# the curious request sequences coming from khubd.
#
# Refactoring means a lot of the current usb_reset_device() logic won't
# need to stay an imperfect clone of the enumeration code ... soon, it
# can just call hub_port_init().
#
# Even without touching usb_reset_device(), this eliminates a deadlock.
# Previously, address0_sem was used both during probe and during reset,
# so probe routines can't implement DFU firmware download (involves a
# reset; DFU also uncovers other problems) or safely recover from probe
# faults by resetting (usb-storage can try that). Now that lock is no
# longer held during probe(); so those deadlocks are gone. (And some
# drivers, like at76c503, can start to remove ugly workarounds.)
#
# drivers/usb/core/usb.c
# 2004/04/21 03:46:29-07:00 david-b@pacbell.net +13 -79
# USB: re-factor enumeration logic
#
# drivers/usb/core/hub.c
# 2004/04/21 03:46:29-07:00 david-b@pacbell.net +215 -72
# USB: re-factor enumeration logic
#
# drivers/usb/core/hcd.c
# 2004/04/21 03:46:29-07:00 david-b@pacbell.net +12 -0
# USB: re-factor enumeration logic
#
# ChangeSet
# 2004/04/23 15:44:32-07:00 david-b@pacbell.net
# [PATCH] USB: usbtest, smp unlink modes
#
# Handle some SMP-visible unlink states better.
#
# drivers/usb/misc/usbtest.c
# 2004/04/14 20:23:11-07:00 david-b@pacbell.net +3 -3
# USB: usbtest, smp unlink modes
#
# ChangeSet
# 2004/04/23 14:50:19-07:00 greg@kroah.com
# [PATCH] USB: fix devio compiler warnings created by previous patch.
#
# drivers/usb/core/devio.c
# 2004/04/23 07:33:30-07:00 greg@kroah.com +2 -2
# USB: fix devio compiler warnings created by previous patch.
#
# ChangeSet
# 2004/04/23 14:49:56-07:00 stern@rowland.harvard.edu
# [PATCH] USB: Eliminate dead code from the UHCI driver
#
# I'm not sure what this piece of code is doing in the UHCI driver. It
# looks like someone envisioned queuing several URBs for the same endpoint
# simultaneously. Anyway, the driver can't do that and this code can never
# run.
#
# drivers/usb/host/uhci-hcd.c
# 2004/04/16 04:02:37-07:00 stern@rowland.harvard.edu +1 -11
# USB: Eliminate dead code from the UHCI driver
#
# ChangeSet
# 2004/04/23 14:49:33-07:00 stern@rowland.harvard.edu
# [PATCH] USB: Implement endpoint_disable() for UHCI
#
# This patch implements the endpoint_disable method for the UHCI driver, as
# you requested a while back. It guarantees that during unbinding events
# (disconnect, configuration change, rmmod) the UHCI driver will have
# finished using every URB for the interface being unbound. It doesn't
# quite guarantee that the completion handlers will have finished running,
# but it would take a pretty unlikely race to violate that assumption. (I
# think it's the same with the OHCI and EHCI drivers.)
#
# Despite the patch numbering this one applies _after_ as249, which is a
# more important bugfix.
#
# drivers/usb/host/uhci-hcd.h
# 2004/04/19 04:05:56-07:00 stern@rowland.harvard.edu +2 -0
# USB: Implement endpoint_disable() for UHCI
#
# drivers/usb/host/uhci-hcd.c
# 2004/04/14 03:19:54-07:00 stern@rowland.harvard.edu +49 -0
# USB: Implement endpoint_disable() for UHCI
#
# ChangeSet
# 2004/04/23 14:49:10-07:00 stern@rowland.harvard.edu
# [PATCH] USB: unusual_devs.h update
#
# On Tue, 20 Apr 2004, Damian Ivereigh wrote:
#
# > Here is the output of dmesg when plugging in an IBM USB MemKey
# >
# > usb-storage: This device (0a16,8888,0100 S 06 P 50) has unneeded SubClass and Protocol entries in unusual_devs.h
# > Please send a copy of this message to
#
# Thank you for sending this in. Greg and Pete, here's the patch.
#
# drivers/usb/storage/unusual_devs.h
# 2004/04/19 05:11:29-07:00 stern@rowland.harvard.edu +1 -1
# USB: unusual_devs.h update
#
# ChangeSet
# 2004/04/23 14:48:47-07:00 stern@rowland.harvard.edu
# [PATCH] USB: Remove unusual_devs entries for Minolta DiMAGE 7, 7Hi
#
# It looks safe to conclude that the unusual_devs.h entries for the Minolta
# DiMAGE 7x cameras aren't needed. (Michael has tested the 7Hi and it's
# definitely unnecessary.) The two other DiMAGE entries probably aren't
# needed either, but we don't have any evidence of that so I'm leaving them.
#
# drivers/usb/storage/unusual_devs.h
# 2004/04/16 04:37:06-07:00 stern@rowland.harvard.edu +0 -16
# USB: Remove unusual_devs entries for Minolta DiMAGE 7, 7Hi
#
# ChangeSet
# 2004/04/23 14:48:28-07:00 david-b@pacbell.net
# [PATCH] USB: root hubs can report remote wakeup feature
#
# The patch lets HCDs report the root hub remote wakeup feature to usbcore
# through config descriptors, and lets usbcore say whether or not remote
# wakeup (of host from sleep, by devices) should be enabled.
#
# Both OHCI and UHCI HCDs have some remote wakeup support already; I'm not
# too sure how well it works. Given (separate) patches, their root hubs
# can start to act more like other hubs in this area too. That'll make
# it easier to start using USB suspend mode.
#
# drivers/usb/core/hcd.h
# 2004/04/13 11:48:39-07:00 david-b@pacbell.net +10 -1
# USB: root hubs can report remote wakeup feature
#
# drivers/usb/core/hcd.c
# 2004/04/13 11:33:31-07:00 david-b@pacbell.net +28 -11
# USB: root hubs can report remote wakeup feature
#
# ChangeSet
# 2004/04/23 14:48:02-07:00 david-b@pacbell.net
# [PATCH] USB: fix usbfs iso interval problem
#
# In 2.6, ISO transfers on USB require a value for urb->interval ... which
# usbfs didn't provide (until this patch), or let user mode drivers specify.
#
# This patch initializes the urb->interval from the endpoint's descriptor,
# so ISO transfers should now work from userspace. It also fixes a related
# problem for interrupt transfers.
#
# drivers/usb/core/devio.c
# 2004/04/14 13:36:53-07:00 david-b@pacbell.net +7 -1
# USB: fix usbfs iso interval problem
#
# ChangeSet
# 2004/04/23 12:58:38-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-usb
#
# CREDITS
# 2004/04/23 12:58:35-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/04/19 19:45:10-07:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-usb
#
# include/linux/pci_ids.h
# 2004/04/19 19:45:07-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# MAINTAINERS
# 2004/04/19 19:45:07-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# CREDITS
# 2004/04/19 19:45:06-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/04/07 20:17:13-07:00 akpm@bix.(none)
# Merge bk://kernel.bkbits.net/gregkh/linux/usb-2.6
# into bix.(none):/usr/src/bk-usb
#
# drivers/usb/core/message.c
# 2004/04/07 20:17:11-07:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/04/02 11:35:28-08:00 akpm@bix.(none)
# Merge bk://kernel.bkbits.net/gregkh/linux/usb-2.6
# into bix.(none):/usr/src/bk-usb
#
# include/linux/pci_ids.h
# 2004/04/02 11:35:25-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/04/01 15:16:14-08:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-usb
#
# CREDITS
# 2004/04/01 15:16:11-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/03/31 19:24:39-08:00 akpm@bix.(none)
# Merge bk://kernel.bkbits.net/gregkh/linux/usb-2.6
# into bix.(none):/usr/src/bk-usb
#
# include/linux/usb.h
# 2004/03/31 19:24:37-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/usb/core/usb.c
# 2004/03/31 19:24:37-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/usb/core/message.c
# 2004/03/31 19:24:37-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/ppc64/defconfig
# 2004/03/31 19:24:36-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/ppc64/configs/pSeries_defconfig
# 2004/03/31 19:24:36-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/ppc/defconfig
# 2004/03/31 19:24:36-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/ppc/configs/pmac_defconfig
# 2004/03/31 19:24:36-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/ppc/configs/common_defconfig
# 2004/03/31 19:24:36-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/parisc/configs/c3000_defconfig
# 2004/03/31 19:24:36-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/ia64/defconfig
# 2004/03/31 19:24:36-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/ia64/configs/zx1_defconfig
# 2004/03/31 19:24:36-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/ia64/configs/generic_defconfig
# 2004/03/31 19:24:36-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/arm/configs/neponset_defconfig
# 2004/03/31 19:24:36-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/03/30 20:18:36-08:00 akpm@bix.(none)
# Merge bk://kernel.bkbits.net/gregkh/linux/usb-2.6
# into bix.(none):/usr/src/bk-usb
#
# arch/ppc64/defconfig
# 2004/03/30 20:18:33-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/ppc64/configs/pSeries_defconfig
# 2004/03/30 20:18:33-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/ppc/defconfig
# 2004/03/30 20:18:33-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/ppc/configs/pmac_defconfig
# 2004/03/30 20:18:33-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/ppc/configs/common_defconfig
# 2004/03/30 20:18:33-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/parisc/configs/c3000_defconfig
# 2004/03/30 20:18:33-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/ia64/defconfig
# 2004/03/30 20:18:33-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/ia64/configs/zx1_defconfig
# 2004/03/30 20:18:33-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/ia64/configs/generic_defconfig
# 2004/03/30 20:18:33-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# arch/arm/configs/neponset_defconfig
# 2004/03/30 20:18:32-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/03/30 12:09:32-08:00 akpm@bix.(none)
# Merge bk://kernel.bkbits.net/gregkh/linux/usb-2.6
# into bix.(none):/usr/src/bk-usb
#
# include/linux/usb.h
# 2004/03/30 12:09:29-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/usb/core/usb.c
# 2004/03/30 12:09:29-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/usb/core/message.c
# 2004/03/30 12:09:29-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/03/29 18:05:43-08:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-usb
#
# MAINTAINERS
# 2004/03/29 18:05:41-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/03/29 13:51:58-08:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-usb
#
# CREDITS
# 2004/03/29 13:51:56-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/03/28 12:29:41-08:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-usb
#
# drivers/usb/core/message.c
# 2004/03/28 12:29:38-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/03/27 02:28:18-08:00 akpm@bix.(none)
# Merge bk://kernel.bkbits.net/gregkh/linux/usb-2.6
# into bix.(none):/usr/src/bk-usb
#
# drivers/usb/input/wacom.c
# 2004/03/27 02:28:16-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/03/26 12:24:49-08:00 akpm@bix.(none)
# Merge bk://kernel.bkbits.net/gregkh/linux/usb-2.6
# into bix.(none):/usr/src/bk-usb
#
# include/linux/usb_gadget.h
# 2004/03/26 12:24:46-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/usb/core/usb.c
# 2004/03/26 12:24:46-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/03/20 13:26:55-08:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-usb
#
# CREDITS
# 2004/03/20 13:26:53-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/03/16 21:53:42-08:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-usb
#
# drivers/usb/input/wacom.c
# 2004/03/16 21:53:39-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/usb/input/hid-core.c
# 2004/03/16 21:53:39-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/03/16 12:59:58-08:00 akpm@bix.(none)
# Merge bk://kernel.bkbits.net/gregkh/linux/usb-2.6
# into bix.(none):/usr/src/bk-usb
#
# include/linux/usb_gadget.h
# 2004/03/16 12:59:47-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# include/linux/usb.h
# 2004/03/16 12:59:47-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/usb/core/usb.c
# 2004/03/16 12:59:46-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# MAINTAINERS
# 2004/03/16 12:59:46-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# CREDITS
# 2004/03/16 12:59:46-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/03/16 12:58:57-08:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-usb
#
# drivers/usb/input/wacom.c
# 2004/03/16 12:58:47-08:00 akpm@bix.(none) +0 -4
# Auto merged
#
# drivers/usb/input/hid-core.c
# 2004/03/16 12:58:47-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# CREDITS
# 2004/03/16 12:58:46-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/03/14 11:03:00-08:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-usb
#
# include/linux/usb_gadget.h
# 2004/03/14 11:02:47-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# include/linux/usb.h
# 2004/03/14 11:02:47-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# drivers/usb/core/usb.c
# 2004/03/14 11:02:47-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# MAINTAINERS
# 2004/03/14 11:02:47-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# ChangeSet
# 2004/03/12 10:57:17-08:00 akpm@bix.(none)
# Merge bix.(none):/usr/src/bk25 into bix.(none):/usr/src/bk-usb
#
# MAINTAINERS
# 2004/03/12 10:57:02-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
# CREDITS
# 2004/03/12 10:57:01-08:00 akpm@bix.(none) +0 -0
# Auto merged
#
diff -Nru a/Documentation/usb/mtouchusb.txt b/Documentation/usb/mtouchusb.txt
--- a/Documentation/usb/mtouchusb.txt Thu Apr 29 23:26:20 2004
+++ b/Documentation/usb/mtouchusb.txt Thu Apr 29 23:26:20 2004
@@ -1,26 +1,38 @@
CHANGES
-- Created based off of scanner & INSTALL from the original touchscreen
+- 0.3 - Created based off of scanner & INSTALL from the original touchscreen
driver on freshmeat (http://freshmeat.net/projects/3mtouchscreendriver)
- Amended for linux-2.4.18, then 2.4.19
-- Complete rewrite using Linux Input in 2.6.3
+- 0.5 - Complete rewrite using Linux Input in 2.6.3
Unfortunately no calibration support at this time
+- 1.4 - Multiple changes to support the EXII 5000UC and house cleaning
+ Changed reset from standard USB dev reset to vendor reset
+ Changed data sent to host from compensated to raw coordinates
+ Eliminated vendor/product module params
+ Performed multiple successfull tests with an EXII-5010UC
-DRIVER NOTES:
+SUPPORTED HARDWARE:
+
+ All controllers have the Vendor: 0x0596 & Product: 0x0001
-Installation is simple, you only need to add Linux Input, Linux USB, and the
-driver to the kernel. The driver can also be optionally built as a module.
-If you have another MicroTouch device that you wish to experiment with
-or try using this driver with, but the Vendor and Product ID's are not
-coded in, don't despair. If the driver was compiled as a module, you can
-pass options to the driver. Simply try:
+ Controller Description Part Number
+ ------------------------------------------------------
- /sbin/modprobe mtouchusb vendor=0x#### product=0x****
+ USB Capacitive - Pearl Case 14-205 (Discontinued)
+ USB Capacitive - Black Case 14-124 (Discontinued)
+ USB Capacitive - No Case 14-206 (Discontinued)
+
+ USB Capacitive - Pearl Case EXII-5010UC
+ USB Capacitive - Black Case EXII-5030UC
+ USB Capacitive - No Case EXII-5050UC
+
+DRIVER NOTES:
-If it works, send me the iVendor & iProduct (or a patch) and I will add...
+Installation is simple, you only need to add Linux Input, Linux USB, and the
+driver to the kernel. The driver can also be optionally built as a module.
This driver appears to be one of possible 2 Linux USB Input Touchscreen
drivers. Although 3M produces a binary only driver available for
@@ -28,53 +40,28 @@
touchscreen for embedded apps using QTEmbedded, DirectFB, etc. So I feel the
logical choice is to use Linux Imput.
-A little info about the MicroTouch USB controller (14-206):
-
-Y is inverted, and the device has a total possible resolution of 0 - 65535.
-
-Y is inverted by the driver by:
+Currently there is no way to calibrate the device via this driver. Even if
+the device could be calibrated, the driver pulls to raw coordinate data from
+the controller. This means calibration must be performed within the
+userspace.
+
+The controller screen resolution is now 0 to 16384 for both X and Y reporting
+the raw touch data. This is the same for the old and new capacitive USB
+controllers.
+
+Perhaps at some point an abstract function will be placed into evdev so
+generic functions like calibrations, resets, and vendor information can be
+requested from the userspace (And the drivers would handle the vendor specific
+tasks).
- input.absmin[ABS_Y] = MTOUCHUSB_MAX_YC;
- input.absmax[ABS_Y] = MTOUCHUSB_MIN_YC;
-
-absmin & absmax are also used to scale the data, sine it is rather high
-resolution.
-
- ---------------touch screen area-----------------
- I MicroTouch (xmax,ymax) @I
- I X I
- I ########visible monitor area############## I
- I #@ (xmin,ymin) # I
- I # # I
- I # # I
- I # # I
- I # # I
- I # # I
- I Y # # I
- I # # I
- I # # I
- I # # I
- I # # I
- I # # I
- I # (xmax,ymax) @# I
- I ########################################## I
- I I
- I@ MicroTouch (xmin,ymin) I
- -------------------------------------------------
-
-Currently there is no way to calibrate the device via this driver. Perhaps
-at some point an abstract function will be placed into evdev so generic
-functions like calibrations, resets, and vendor information can be requested
-(And the drivers would handle the vendor specific tasks).
-
-ADDITIONAL INFORMATION/UPDATES:
+ADDITIONAL INFORMATION/UPDATES/X CONFIGURATION EXAMPLE:
http://groomlakelabs.com/grandamp/code/microtouch/
TODO:
Implement a control urb again to handle requests to and from the device
-such as calibration, etc.
+such as calibration, etc once/if it becomes available.
DISCLAMER:
@@ -83,3 +70,7 @@
http://www.3m.com/3MTouchSystems/downloads/
+THANKS:
+
+A huge thank you to 3M Touch Systems for the EXII-5010UC controllers for
+testing!
diff -Nru a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c
--- a/drivers/bluetooth/bfusb.c Thu Apr 29 23:26:20 2004
+++ b/drivers/bluetooth/bfusb.c Thu Apr 29 23:26:20 2004
@@ -98,14 +98,6 @@
static void bfusb_tx_complete(struct urb *urb, struct pt_regs *regs);
static void bfusb_rx_complete(struct urb *urb, struct pt_regs *regs);
-static inline void bfusb_wait_for_urb(struct urb *urb)
-{
- while (atomic_read(&urb->count) > 1) {
- current->state = TASK_UNINTERRUPTIBLE;
- schedule_timeout((5 * HZ + 999) / 1000);
- }
-}
-
static struct urb *bfusb_get_completed(struct bfusb *bfusb)
{
struct sk_buff *skb;
@@ -132,7 +124,6 @@
while ((skb = skb_dequeue(&bfusb->pending_q))) {
urb = ((struct bfusb_scb *) skb->cb)->urb;
usb_unlink_urb(urb);
- bfusb_wait_for_urb(urb);
skb_queue_tail(&bfusb->completed_q, skb);
}
diff -Nru a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c
--- a/drivers/bluetooth/hci_usb.c Thu Apr 29 23:26:20 2004
+++ b/drivers/bluetooth/hci_usb.c Thu Apr 29 23:26:20 2004
@@ -342,7 +342,7 @@
static inline void hci_usb_wait_for_urb(struct urb *urb)
{
- while (atomic_read(&urb->count) > 1) {
+ while (atomic_read(&urb->kref.refcount) > 1) {
current->state = TASK_UNINTERRUPTIBLE;
schedule_timeout((5 * HZ + 999) / 1000);
}
diff -Nru a/drivers/usb/Makefile b/drivers/usb/Makefile
--- a/drivers/usb/Makefile Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/Makefile Thu Apr 29 23:26:20 2004
@@ -66,3 +66,4 @@
obj-$(CONFIG_USB_TEST) += misc/
obj-$(CONFIG_USB_TIGL) += misc/
obj-$(CONFIG_USB_USS720) += misc/
+obj-$(CONFIG_USB_PHIDGETSERVO) += misc/
diff -Nru a/drivers/usb/core/config.c b/drivers/usb/core/config.c
--- a/drivers/usb/core/config.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/core/config.c Thu Apr 29 23:26:20 2004
@@ -96,19 +96,14 @@
return buffer - buffer0 + i;
}
-static void usb_free_intf(struct usb_interface *intf)
+static void usb_release_interface_cache(struct kref *ref)
{
+ struct usb_interface_cache *intfc = ref_to_usb_interface_cache(ref);
int j;
- if (intf->altsetting) {
- for (j = 0; j < intf->num_altsetting; j++) {
- struct usb_host_interface *alt = &intf->altsetting[j];
-
- kfree(alt->endpoint);
- }
- kfree(intf->altsetting);
- }
- kfree(intf);
+ for (j = 0; j < intfc->num_altsetting; j++)
+ kfree(intfc->altsetting[j].endpoint);
+ kfree(intfc);
}
static int usb_parse_interface(struct device *ddev, int cfgno,
@@ -117,7 +112,7 @@
unsigned char *buffer0 = buffer;
struct usb_interface_descriptor *d;
int inum, asnum;
- struct usb_interface *interface;
+ struct usb_interface_cache *intfc;
struct usb_host_interface *alt;
int i, n;
int len, retval;
@@ -137,16 +132,16 @@
if (inum >= config->desc.bNumInterfaces)
goto skip_to_next_interface_descriptor;
- interface = config->interface[inum];
+ intfc = config->intf_cache[inum];
asnum = d->bAlternateSetting;
- if (asnum >= interface->num_altsetting) {
+ if (asnum >= intfc->num_altsetting) {
dev_err(ddev, "config %d interface %d has an invalid "
"alternate setting number: %d but max is %d\n",
- cfgno, inum, asnum, interface->num_altsetting - 1);
+ cfgno, inum, asnum, intfc->num_altsetting - 1);
return -EINVAL;
}
- alt = &interface->altsetting[asnum];
+ alt = &intfc->altsetting[asnum];
if (alt->desc.bLength) {
dev_err(ddev, "Duplicate descriptor for config %d "
"interface %d altsetting %d\n", cfgno, inum, asnum);
@@ -210,11 +205,12 @@
int cfgno;
int nintf, nintf_orig;
int i, j, n;
- struct usb_interface *interface;
+ struct usb_interface_cache *intfc;
unsigned char *buffer2;
int size2;
struct usb_descriptor_header *header;
int len, retval;
+ u8 nalts[USB_MAXINTERFACES];
memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE);
if (config->desc.bDescriptorType != USB_DT_CONFIG ||
@@ -237,14 +233,7 @@
cfgno, nintf, USB_MAXINTERFACES);
config->desc.bNumInterfaces = nintf = USB_MAXINTERFACES;
}
-
- for (i = 0; i < nintf; ++i) {
- interface = config->interface[i] =
- kmalloc(sizeof(struct usb_interface), GFP_KERNEL);
- if (!interface)
- return -ENOMEM;
- memset(interface, 0, sizeof(struct usb_interface));
- }
+ memset(nalts, 0, nintf);
/* Go through the descriptors, checking their length and counting the
* number of altsettings for each interface */
@@ -277,8 +266,8 @@
cfgno, i, nintf_orig - 1);
return -EINVAL;
}
- if (i < nintf)
- ++config->interface[i]->num_altsetting;
+ if (i < nintf && nalts[i] < 255)
+ ++nalts[i];
} else if (header->bDescriptorType == USB_DT_DEVICE ||
header->bDescriptorType == USB_DT_CONFIG) {
@@ -290,29 +279,29 @@
} /* for ((buffer2 = buffer, size2 = size); ...) */
- /* Allocate the altsetting arrays */
+ /* Allocate the usb_interface_caches and altsetting arrays */
for (i = 0; i < nintf; ++i) {
- interface = config->interface[i];
- if (interface->num_altsetting > USB_MAXALTSETTING) {
+ j = nalts[i];
+ if (j > USB_MAXALTSETTING) {
dev_err(ddev, "too many alternate settings for "
"config %d interface %d: %d, "
"maximum allowed: %d\n",
- cfgno, i, interface->num_altsetting,
- USB_MAXALTSETTING);
+ cfgno, i, j, USB_MAXALTSETTING);
return -EINVAL;
}
- if (interface->num_altsetting == 0) {
+ if (j == 0) {
dev_err(ddev, "config %d has no interface number "
"%d\n", cfgno, i);
return -EINVAL;
}
- len = sizeof(*interface->altsetting) *
- interface->num_altsetting;
- interface->altsetting = kmalloc(len, GFP_KERNEL);
- if (!interface->altsetting)
+ len = sizeof(*intfc) + sizeof(struct usb_host_interface) * j;
+ config->intf_cache[i] = intfc = kmalloc(len, GFP_KERNEL);
+ if (!intfc)
return -ENOMEM;
- memset(interface->altsetting, 0, len);
+ memset(intfc, 0, len);
+ intfc->num_altsetting = j;
+ kref_init(&intfc->ref, usb_release_interface_cache);
}
/* Skip over any Class Specific or Vendor Specific descriptors;
@@ -340,9 +329,9 @@
/* Check for missing altsettings */
for (i = 0; i < nintf; ++i) {
- interface = config->interface[i];
- for (j = 0; j < interface->num_altsetting; ++j) {
- if (!interface->altsetting[j].desc.bLength) {
+ intfc = config->intf_cache[i];
+ for (j = 0; j < intfc->num_altsetting; ++j) {
+ if (!intfc->altsetting[j].desc.bLength) {
dev_err(ddev, "config %d interface %d has no "
"altsetting %d\n", cfgno, i, j);
return -EINVAL;
@@ -374,10 +363,8 @@
struct usb_host_config *cf = &dev->config[c];
for (i = 0; i < cf->desc.bNumInterfaces; i++) {
- struct usb_interface *ifp = cf->interface[i];
-
- if (ifp)
- usb_free_intf(ifp);
+ if (cf->intf_cache[i])
+ kref_put(&cf->intf_cache[i]->ref);
}
}
kfree(dev->config);
diff -Nru a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
--- a/drivers/usb/core/devices.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/core/devices.c Thu Apr 29 23:26:20 2004
@@ -232,13 +232,21 @@
return start;
}
-static char *usb_dump_interface_descriptor(char *start, char *end, const struct usb_interface *iface, int setno)
+static char *usb_dump_interface_descriptor(char *start, char *end,
+ const struct usb_interface_cache *intfc,
+ const struct usb_interface *iface,
+ int setno)
{
- struct usb_interface_descriptor *desc = &iface->altsetting[setno].desc;
+ const struct usb_interface_descriptor *desc = &intfc->altsetting[setno].desc;
+ char *driver_name = "";
if (start > end)
return start;
down_read(&usb_bus_type.subsys.rwsem);
+ if (iface)
+ driver_name = (iface->dev.driver
+ ? iface->dev.driver->name
+ : "(none)");
start += sprintf(start, format_iface,
desc->bInterfaceNumber,
desc->bAlternateSetting,
@@ -247,9 +255,7 @@
class_decode(desc->bInterfaceClass),
desc->bInterfaceSubClass,
desc->bInterfaceProtocol,
- iface->dev.driver
- ? iface->dev.driver->name
- : "(none)");
+ driver_name);
up_read(&usb_bus_type.subsys.rwsem);
return start;
}
@@ -258,13 +264,14 @@
int speed,
char *start,
char *end,
+ const struct usb_interface_cache *intfc,
const struct usb_interface *iface,
int setno
) {
- struct usb_host_interface *desc = &iface->altsetting[setno];
+ const struct usb_host_interface *desc = &intfc->altsetting[setno];
int i;
- start = usb_dump_interface_descriptor(start, end, iface, setno);
+ start = usb_dump_interface_descriptor(start, end, intfc, iface, setno);
for (i = 0; i < desc->desc.bNumEndpoints; i++) {
if (start > end)
return start;
@@ -303,6 +310,7 @@
)
{
int i, j;
+ struct usb_interface_cache *intfc;
struct usb_interface *interface;
if (start > end)
@@ -311,14 +319,13 @@
return start + sprintf(start, "(null Cfg. desc.)\n");
start = usb_dump_config_descriptor(start, end, &config->desc, active);
for (i = 0; i < config->desc.bNumInterfaces; i++) {
+ intfc = config->intf_cache[i];
interface = config->interface[i];
- if (!interface)
- break;
- for (j = 0; j < interface->num_altsetting; j++) {
+ for (j = 0; j < intfc->num_altsetting; j++) {
if (start > end)
return start;
start = usb_dump_interface(speed,
- start, end, interface, j);
+ start, end, intfc, interface, j);
}
}
return start;
@@ -395,7 +402,7 @@
return start;
start = usb_dump_device_strings (start, end, dev);
-
+
for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
if (start > end)
return start;
@@ -445,6 +452,7 @@
* nbytes - the maximum number of bytes to write
* skip_bytes - the number of bytes to skip before writing anything
* file_offset - the offset into the devices file on completion
+ * The caller must own the usbdev->serialize semaphore.
*/
static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, loff_t *skip_bytes, loff_t *file_offset,
struct usb_device *usbdev, struct usb_bus *bus, int level, int index, int count)
@@ -545,9 +553,13 @@
/* Now look at all of this device's children. */
for (chix = 0; chix < usbdev->maxchild; chix++) {
- if (usbdev->children[chix]) {
- ret = usb_device_dump(buffer, nbytes, skip_bytes, file_offset, usbdev->children[chix],
+ struct usb_device *childdev = usbdev->children[chix];
+
+ if (childdev) {
+ down(&childdev->serialize);
+ ret = usb_device_dump(buffer, nbytes, skip_bytes, file_offset, childdev,
bus, level + 1, chix, ++cnt);
+ up(&childdev->serialize);
if (ret == -EFAULT)
return total_written;
total_written += ret;
@@ -575,8 +587,11 @@
for (buslist = usb_bus_list.next; buslist != &usb_bus_list; buslist = buslist->next) {
/* print devices for this bus */
bus = list_entry(buslist, struct usb_bus, bus_list);
+
/* recurse through all children of the root hub */
+ down(&bus->root_hub->serialize);
ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos, bus->root_hub, bus, 0, 0, 0);
+ up(&bus->root_hub->serialize);
if (ret < 0) {
up(&usb_bus_list_lock);
return ret;
diff -Nru a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
--- a/drivers/usb/core/devio.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/core/devio.c Thu Apr 29 23:26:20 2004
@@ -60,6 +60,11 @@
struct urb *urb;
};
+static inline int connected (struct usb_device *dev)
+{
+ return dev->state != USB_STATE_NOTATTACHED;
+}
+
static loff_t usbdev_lseek(struct file *file, loff_t offset, int orig)
{
loff_t ret;
@@ -87,14 +92,15 @@
static ssize_t usbdev_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos)
{
struct dev_state *ps = (struct dev_state *)file->private_data;
+ struct usb_device *dev = ps->dev;
ssize_t ret = 0;
unsigned len;
loff_t pos;
int i;
pos = *ppos;
- down_read(&ps->devsem);
- if (!ps->dev) {
+ down(&dev->serialize);
+ if (!connected(dev)) {
ret = -ENODEV;
goto err;
} else if (pos < 0) {
@@ -106,7 +112,7 @@
len = sizeof(struct usb_device_descriptor) - pos;
if (len > nbytes)
len = nbytes;
- if (copy_to_user(buf, ((char *)&ps->dev->descriptor) + pos, len)) {
+ if (copy_to_user(buf, ((char *)&dev->descriptor) + pos, len)) {
ret = -EFAULT;
goto err;
}
@@ -118,9 +124,9 @@
}
pos = sizeof(struct usb_device_descriptor);
- for (i = 0; nbytes && i < ps->dev->descriptor.bNumConfigurations; i++) {
+ for (i = 0; nbytes && i < dev->descriptor.bNumConfigurations; i++) {
struct usb_config_descriptor *config =
- (struct usb_config_descriptor *)ps->dev->rawdescriptors[i];
+ (struct usb_config_descriptor *)dev->rawdescriptors[i];
unsigned int length = le16_to_cpu(config->wTotalLength);
if (*ppos < pos + length) {
@@ -128,7 +134,7 @@
/* The descriptor may claim to be longer than it
* really is. Here is the actual allocated length. */
unsigned alloclen =
- ps->dev->config[i].desc.wTotalLength;
+ dev->config[i].desc.wTotalLength;
len = length - (*ppos - pos);
if (len > nbytes)
@@ -138,7 +144,7 @@
if (alloclen > (*ppos - pos)) {
alloclen -= (*ppos - pos);
if (copy_to_user(buf,
- ps->dev->rawdescriptors[i] + (*ppos - pos),
+ dev->rawdescriptors[i] + (*ppos - pos),
min(len, alloclen))) {
ret = -EFAULT;
goto err;
@@ -155,7 +161,7 @@
}
err:
- up_read(&ps->devsem);
+ up(&dev->serialize);
return ret;
}
@@ -335,6 +341,7 @@
static void driver_disconnect(struct usb_interface *intf)
{
struct dev_state *ps = usb_get_intfdata (intf);
+ unsigned int ifnum = intf->altsetting->desc.bInterfaceNumber;
if (!ps)
return;
@@ -343,13 +350,12 @@
* all pending I/O requests; 2.6 does that.
*/
- /* prevent new I/O requests */
- ps->dev = 0;
- clear_bit(intf->cur_altsetting->desc.bInterfaceNumber, &ps->ifclaimed);
+ WARN_ON(ifnum >= 8*sizeof(ps->ifclaimed));
+ clear_bit(ifnum, &ps->ifclaimed);
usb_set_intfdata (intf, NULL);
/* force async requests to complete */
- destroy_all_async (ps);
+ destroy_async_on_interface(ps, ifnum);
}
struct usb_driver usbdevfs_driver = {
@@ -365,7 +371,7 @@
struct usb_interface *iface;
int err;
- if (intf >= 8*sizeof(ps->ifclaimed) || !dev
+ if (intf >= 8*sizeof(ps->ifclaimed)
|| intf >= dev->actconfig->desc.bNumInterfaces)
return -EINVAL;
/* already claimed */
@@ -395,7 +401,6 @@
return -EINVAL;
err = -EINVAL;
dev = ps->dev;
- down(&dev->serialize);
/* lock against other changes to driver bindings */
down_write(&usb_bus_type.subsys.rwsem);
if (test_and_clear_bit(intf, &ps->ifclaimed)) {
@@ -404,7 +409,6 @@
err = 0;
}
up_write(&usb_bus_type.subsys.rwsem);
- up(&dev->serialize);
return err;
}
@@ -506,7 +510,7 @@
lock_kernel();
ret = -ENOENT;
- dev = inode->u.generic_ip;
+ dev = usb_get_dev(inode->u.generic_ip);
if (!dev) {
kfree(ps);
goto out;
@@ -518,7 +522,6 @@
INIT_LIST_HEAD(&ps->async_pending);
INIT_LIST_HEAD(&ps->async_completed);
init_waitqueue_head(&ps->wait);
- init_rwsem(&ps->devsem);
ps->discsignr = 0;
ps->disctask = current;
ps->disccontext = NULL;
@@ -535,18 +538,21 @@
static int usbdev_release(struct inode *inode, struct file *file)
{
struct dev_state *ps = (struct dev_state *)file->private_data;
+ struct usb_device *dev = ps->dev;
unsigned int i;
- lock_kernel();
+ down(&dev->serialize);
list_del_init(&ps->list);
- if (ps->dev) {
+ if (connected(dev)) {
for (i = 0; ps->ifclaimed && i < 8*sizeof(ps->ifclaimed); i++)
if (test_bit(i, &ps->ifclaimed))
releaseintf(ps, i);
+ destroy_all_async(ps);
}
- unlock_kernel();
- destroy_all_async(ps);
+ up(&dev->serialize);
+ usb_put_dev(dev);
+ ps->dev = NULL;
kfree(ps);
return 0;
}
@@ -702,13 +708,15 @@
return -EFAULT;
if ((ret = findintfif(ps->dev, gd.interface)) < 0)
return ret;
+ down_read(&usb_bus_type.subsys.rwsem);
interface = ps->dev->actconfig->interface[ret];
- if (!interface->dev.driver)
+ if (!interface || !interface->dev.driver) {
+ up_read(&usb_bus_type.subsys.rwsem);
return -ENODATA;
+ }
strncpy(gd.driver, interface->dev.driver->name, sizeof(gd.driver));
- if (copy_to_user(arg, &gd, sizeof(gd)))
- return -EFAULT;
- return 0;
+ up_read(&usb_bus_type.subsys.rwsem);
+ return copy_to_user(arg, &gd, sizeof(gd)) ? -EFAULT : 0;
}
static int proc_connectinfo(struct dev_state *ps, void __user *arg)
@@ -724,9 +732,6 @@
static int proc_resetdevice(struct dev_state *ps)
{
- /* FIXME when usb_reset_device() is fixed we'll need to grab
- * ps->dev->serialize before calling it.
- */
return usb_reset_device(ps->dev);
}
@@ -742,10 +747,8 @@
if ((ret = findintfif(ps->dev, setintf.interface)) < 0)
return ret;
interface = ps->dev->actconfig->interface[ret];
- if (interface->dev.driver) {
- if ((ret = checkintf(ps, ret)))
- return ret;
- }
+ if ((ret = checkintf(ps, ret)))
+ return ret;
if (usb_set_interface(ps->dev, setintf.interface, setintf.altsetting))
return -EINVAL;
return 0;
@@ -760,7 +763,6 @@
if (get_user(u, (unsigned int __user *)arg))
return -EFAULT;
- down(&ps->dev->serialize);
actconfig = ps->dev->actconfig;
/* Don't touch the device if any interfaces are claimed.
@@ -796,7 +798,6 @@
else
status = usb_set_configuration(ps->dev, u);
}
- up(&ps->dev->serialize);
return status;
}
@@ -873,6 +874,9 @@
/* arbitrary limit */
if (uurb.number_of_packets < 1 || uurb.number_of_packets > 128)
return -EINVAL;
+ if (!(ep_desc = usb_epnum_to_ep_desc(ps->dev, uurb.endpoint)))
+ return -ENOENT;
+ interval = 1 << min (15, ep_desc->bInterval - 1);
isofrmlen = sizeof(struct usbdevfs_iso_packet_desc) * uurb.number_of_packets;
if (!(isopkt = kmalloc(isofrmlen, GFP_KERNEL)))
return -ENOMEM;
@@ -898,7 +902,10 @@
uurb.number_of_packets = 0;
if (!(ep_desc = usb_epnum_to_ep_desc(ps->dev, uurb.endpoint)))
return -ENOENT;
- interval = ep_desc->bInterval;
+ if (ps->dev->speed == USB_SPEED_HIGH)
+ interval = 1 << min (15, ep_desc->bInterval - 1);
+ else
+ interval = ep_desc->bInterval;
if (uurb.buffer_length > 16384)
return -EINVAL;
if (!access_ok((uurb.endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb.buffer, uurb.buffer_length))
@@ -1012,18 +1019,19 @@
DECLARE_WAITQUEUE(wait, current);
struct async *as = NULL;
void __user *addr;
+ struct usb_device *dev = ps->dev;
int ret;
add_wait_queue(&ps->wait, &wait);
- while (ps->dev) {
+ while (connected(dev)) {
__set_current_state(TASK_INTERRUPTIBLE);
if ((as = async_getcompleted(ps)))
break;
if (signal_pending(current))
break;
- up_read(&ps->devsem);
+ up(&dev->serialize);
schedule();
- down_read(&ps->devsem);
+ down(&dev->serialize);
}
remove_wait_queue(&ps->wait, &wait);
set_current_state(TASK_RUNNING);
@@ -1125,13 +1133,12 @@
}
}
- if (!ps->dev) {
+ if (!connected(ps->dev)) {
if (buf)
kfree(buf);
return -ENODEV;
}
- down(&ps->dev->serialize);
if (ps->dev->state != USB_STATE_CONFIGURED)
retval = -ENODEV;
else if (!(ifp = usb_ifnum_to_if (ps->dev, ctrl.ifno)))
@@ -1169,7 +1176,6 @@
}
up_read(&usb_bus_type.subsys.rwsem);
}
- up(&ps->dev->serialize);
/* cleanup and return */
if (retval >= 0
@@ -1190,13 +1196,14 @@
static int usbdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
struct dev_state *ps = (struct dev_state *)file->private_data;
+ struct usb_device *dev = ps->dev;
int ret = -ENOTTY;
if (!(file->f_mode & FMODE_WRITE))
return -EPERM;
- down_read(&ps->devsem);
- if (!ps->dev) {
- up_read(&ps->devsem);
+ down(&dev->serialize);
+ if (!connected(dev)) {
+ up(&dev->serialize);
return -ENODEV;
}
switch (cmd) {
@@ -1278,7 +1285,7 @@
ret = proc_ioctl(ps, (void __user *) arg);
break;
}
- up_read(&ps->devsem);
+ up(&dev->serialize);
if (ret >= 0)
inode->i_atime = CURRENT_TIME;
return ret;
@@ -1293,7 +1300,7 @@
poll_wait(file, &ps->wait, wait);
if (file->f_mode & FMODE_WRITE && !list_empty(&ps->async_completed))
mask |= POLLOUT | POLLWRNORM;
- if (!ps->dev)
+ if (!connected(ps->dev))
mask |= POLLERR | POLLHUP;
return mask;
}
diff -Nru a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
--- a/drivers/usb/core/hcd.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/core/hcd.c Thu Apr 29 23:26:20 2004
@@ -171,10 +171,10 @@
0x01, /* __u8 bNumInterfaces; (1) */
0x01, /* __u8 bConfigurationValue; */
0x00, /* __u8 iConfiguration; */
- 0x40, /* __u8 bmAttributes;
- Bit 7: Bus-powered,
+ 0xc0, /* __u8 bmAttributes;
+ Bit 7: must be set,
6: Self-powered,
- 5 Remote-wakwup,
+ 5: Remote wakeup,
4..0: resvd */
0x00, /* __u8 MaxPower; */
@@ -218,10 +218,10 @@
0x01, /* __u8 bNumInterfaces; (1) */
0x01, /* __u8 bConfigurationValue; */
0x00, /* __u8 iConfiguration; */
- 0x40, /* __u8 bmAttributes;
- Bit 7: Bus-powered,
+ 0xc0, /* __u8 bmAttributes;
+ Bit 7: must be set,
6: Self-powered,
- 5 Remote-wakwup,
+ 5: Remote wakeup,
4..0: resvd */
0x00, /* __u8 MaxPower; */
@@ -324,13 +324,15 @@
/* Root hub control transfers execute synchronously */
static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
{
- struct usb_ctrlrequest *cmd = (struct usb_ctrlrequest *) urb->setup_packet;
+ struct usb_ctrlrequest *cmd;
u16 typeReq, wValue, wIndex, wLength;
const u8 *bufp = 0;
u8 *ubuf = urb->transfer_buffer;
int len = 0;
+ int patch_wakeup = 0;
unsigned long flags;
+ cmd = (struct usb_ctrlrequest *) urb->setup_packet;
typeReq = (cmd->bRequestType << 8) | cmd->bRequest;
wValue = le16_to_cpu (cmd->wValue);
wIndex = le16_to_cpu (cmd->wIndex);
@@ -347,13 +349,21 @@
/* DEVICE REQUESTS */
case DeviceRequest | USB_REQ_GET_STATUS:
- // DEVICE_REMOTE_WAKEUP
- ubuf [0] = 1; // selfpowered
+ ubuf [0] = (hcd->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP)
+ | (1 << USB_DEVICE_SELF_POWERED);
ubuf [1] = 0;
- /* FALLTHROUGH */
+ break;
case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
+ if (wValue == USB_DEVICE_REMOTE_WAKEUP)
+ hcd->remote_wakeup = 0;
+ else
+ goto error;
+ break;
case DeviceOutRequest | USB_REQ_SET_FEATURE:
- dev_dbg (hcd->self.controller, "no device features yet yet\n");
+ if (hcd->can_wakeup && wValue == USB_DEVICE_REMOTE_WAKEUP)
+ hcd->remote_wakeup = 1;
+ else
+ goto error;
break;
case DeviceRequest | USB_REQ_GET_CONFIGURATION:
ubuf [0] = 1;
@@ -379,6 +389,8 @@
bufp = fs_rh_config_descriptor;
len = sizeof fs_rh_config_descriptor;
}
+ if (hcd->can_wakeup)
+ patch_wakeup = 1;
break;
case USB_DT_STRING << 8:
urb->actual_length = rh_string (
@@ -444,6 +456,11 @@
urb->actual_length = len;
// always USB_DIR_IN, toward host
memcpy (ubuf, bufp, len);
+
+ /* report whether RH hardware supports remote wakeup */
+ if (patch_wakeup)
+ ((struct usb_config_descriptor *)ubuf)->bmAttributes
+ |= USB_CONFIG_ATT_WAKEUP;
}
/* any errors get returned through the urb completion */
@@ -762,10 +779,22 @@
set_bit (devnum, usb_dev->bus->devmap.devicemap);
usb_dev->state = USB_STATE_ADDRESS;
+ usb_dev->epmaxpacketin[0] = usb_dev->epmaxpacketout[0] = 64;
+ retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
+ if (retval != sizeof usb_dev->descriptor) {
+ dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
+ usb_dev->dev.bus_id, retval);
+ return (retval < 0) ? retval : -EMSGSIZE;
+ }
+
+ (void) usb_get_dev (usb_dev);
+ down (&usb_dev->serialize);
retval = usb_new_device (usb_dev);
if (retval)
dev_err (parent_dev, "can't register root hub for %s, %d\n",
usb_dev->dev.bus_id, retval);
+ up (&usb_dev->serialize);
+ usb_put_dev (usb_dev);
return retval;
}
EXPORT_SYMBOL (usb_register_root_hub);
diff -Nru a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
--- a/drivers/usb/core/hcd.h Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/core/hcd.h Thu Apr 29 23:26:20 2004
@@ -74,6 +74,8 @@
*/
struct hc_driver *driver; /* hw-specific hooks */
unsigned saw_irq : 1;
+ unsigned can_wakeup:1; /* hw supports wakeup? */
+ unsigned remote_wakeup:1;/* sw should use wakeup? */
int irq; /* irq allocated */
void *regs; /* device memory/io */
@@ -344,9 +346,16 @@
extern int usb_register_root_hub (struct usb_device *usb_dev,
struct device *parent_dev);
-/* for portability to 2.4, hcds should call this */
static inline int hcd_register_root (struct usb_hcd *hcd)
{
+ /* hcd->driver->start() reported can_wakeup, probably with
+ * assistance from board's boot firmware.
+ * NOTE: normal devices won't enable wakeup by default.
+ */
+ if (hcd->can_wakeup)
+ dev_dbg (hcd->self.controller, "supports USB remote wakeup\n");
+ hcd->remote_wakeup = hcd->can_wakeup;
+
return usb_register_root_hub (
hcd_to_bus (hcd)->root_hub, hcd->self.controller);
}
diff -Nru a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
--- a/drivers/usb/core/hub.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/core/hub.c Thu Apr 29 23:26:20 2004
@@ -373,12 +373,13 @@
struct usb_device *dev;
int i;
- /* Enable power to the ports */
- dev_dbg(hubdev(interface_to_usbdev(hub->intf)),
- "enabling power on all ports\n");
- dev = interface_to_usbdev(hub->intf);
- for (i = 0; i < hub->descriptor->bNbrPorts; i++)
- set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER);
+ /* if hub supports power switching, enable power on each port */
+ if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) < 2) {
+ dev_dbg(&hub->intf->dev, "enabling power on all ports\n");
+ dev = interface_to_usbdev(hub->intf);
+ for (i = 0; i < hub->descriptor->bNbrPorts; i++)
+ set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER);
+ }
/* Wait for power to be enabled */
wait_ms(hub->descriptor->bPwrOn2PwrGood * 2);
@@ -545,8 +546,25 @@
dev_dbg(hub_dev, "power on to power good time: %dms\n",
hub->descriptor->bPwrOn2PwrGood * 2);
- dev_dbg(hub_dev, "hub controller current requirement: %dmA\n",
- hub->descriptor->bHubContrCurrent);
+
+ /* power budgeting mostly matters with bus-powered hubs,
+ * and battery-powered root hubs (may provide just 8 mA).
+ */
+ ret = usb_get_status(dev, USB_RECIP_DEVICE, 0, &hubstatus);
+ if (ret < 0) {
+ message = "can't get hubdev status";
+ goto fail;
+ }
+ cpu_to_le16s(&hubstatus);
+ if ((hubstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0) {
+ dev_dbg(hub_dev, "hub controller current requirement: %dmA\n",
+ hub->descriptor->bHubContrCurrent);
+ hub->power_budget = (501 - hub->descriptor->bHubContrCurrent)
+ / 2;
+ dev_dbg(hub_dev, "%dmA bus power budget for children\n",
+ hub->power_budget * 2);
+ }
+
ret = hub_hub_status(hub, &hubstatus, &hubchange);
if (ret < 0) {
@@ -554,12 +572,11 @@
goto fail;
}
- /* FIXME implement per-port power budgeting;
- * enable it for bus-powered hubs.
- */
- dev_dbg(hub_dev, "local power source is %s\n",
- (hubstatus & HUB_STATUS_LOCAL_POWER)
- ? "lost (inactive)" : "good");
+ /* local power status reports aren't always correct */
+ if (dev->actconfig->desc.bmAttributes & USB_CONFIG_ATT_SELFPOWER)
+ dev_dbg(hub_dev, "local power source is %s\n",
+ (hubstatus & HUB_STATUS_LOCAL_POWER)
+ ? "lost (inactive)" : "good");
if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_OCPM) == 0)
dev_dbg(hub_dev, "%sover-current condition exists\n",
@@ -611,6 +628,8 @@
return ret;
}
+static unsigned highspeed_hubs;
+
static void hub_disconnect(struct usb_interface *intf)
{
struct usb_hub *hub = usb_get_intfdata (intf);
@@ -620,6 +639,9 @@
if (!hub)
return;
+ if (interface_to_usbdev(intf)->speed == USB_SPEED_HIGH)
+ highspeed_hubs--;
+
usb_set_intfdata (intf, NULL);
spin_lock_irqsave(&hub_event_lock, flags);
hub->urb_complete = &urb_complete;
@@ -731,6 +753,9 @@
usb_set_intfdata (intf, hub);
+ if (dev->speed == USB_SPEED_HIGH)
+ highspeed_hubs++;
+
if (hub_configure(hub, endpoint) >= 0)
return 0;
@@ -841,8 +866,11 @@
return ret;
}
-#define HUB_RESET_TRIES 5
-#define HUB_PROBE_TRIES 2
+#define PORT_RESET_TRIES 5
+#define SET_ADDRESS_TRIES 2
+#define GET_DESCRIPTOR_TRIES 2
+#define SET_CONFIG_TRIES 2
+
#define HUB_ROOT_RESET_TIME 50 /* times are in msec */
#define HUB_SHORT_RESET_TIME 10
#define HUB_LONG_RESET_TIME 200
@@ -907,7 +935,7 @@
int i, status;
/* Reset the port */
- for (i = 0; i < HUB_RESET_TRIES; i++) {
+ for (i = 0; i < PORT_RESET_TRIES; i++) {
set_port_feature(hub, port + 1, USB_PORT_FEAT_RESET);
/* return on disconnect or reset */
@@ -1003,40 +1031,20 @@
return ((portstatus&USB_PORT_STAT_CONNECTION)) ? 0 : 1;
}
-static void hub_port_connect_change(struct usb_hub *hubstate, int port,
- u16 portstatus, u16 portchange)
+/* reset device, (re)assign address, get device descriptor.
+ * device connection is stable, no more debouncing needed.
+ * returns device in USB_STATE_ADDRESS, except on error.
+ * on error return, device is no longer usable (ref dropped).
+ *
+ * caller owns dev->serialize for the device, guarding against
+ * config changes and disconnect processing.
+ */
+static int
+hub_port_init (struct usb_device *hub, struct usb_device *dev, int port)
{
- struct usb_device *hub = interface_to_usbdev(hubstate->intf);
- struct usb_device *dev;
- unsigned int delay = HUB_SHORT_RESET_TIME;
- int i;
-
- dev_dbg (&hubstate->intf->dev,
- "port %d, status %x, change %x, %s\n",
- port + 1, portstatus, portchange, portspeed (portstatus));
-
- /* Clear the connection change status */
- clear_port_feature(hub, port + 1, USB_PORT_FEAT_C_CONNECTION);
-
- /* Disconnect any existing devices under this port */
- if (hub->children[port])
- usb_disconnect(&hub->children[port]);
-
- /* Return now if nothing is connected */
- if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
- if (portstatus & USB_PORT_STAT_ENABLE)
- hub_port_disable(hub, port);
-
- return;
- }
-
- if (hub_port_debounce(hub, port)) {
- dev_err (&hubstate->intf->dev,
- "connect-debounce failed, port %d disabled\n",
- port+1);
- hub_port_disable(hub, port);
- return;
- }
+ int i, j, retval = -ENODEV;
+ unsigned delay = HUB_SHORT_RESET_TIME;
+ enum usb_device_speed oldspeed = dev->speed;
/* root hub ports have a slightly longer reset period
* (from USB 2.0 spec, section 7.1.7.5)
@@ -1046,31 +1054,53 @@
/* Some low speed devices have problems with the quick delay, so */
/* be a bit pessimistic with those devices. RHbug #23670 */
- if (portstatus & USB_PORT_STAT_LOW_SPEED)
+ if (oldspeed == USB_SPEED_LOW)
delay = HUB_LONG_RESET_TIME;
down(&usb_address0_sem);
- for (i = 0; i < HUB_PROBE_TRIES; i++) {
-
- /* Allocate a new device struct */
- dev = usb_alloc_dev(hub, hub->bus, port);
- if (!dev) {
- dev_err (&hubstate->intf->dev,
- "couldn't allocate usb_device\n");
- break;
- }
-
- dev->state = USB_STATE_POWERED;
-
- /* Reset the device, and detect its speed */
- if (hub_port_reset(hub, port, dev, delay)) {
- usb_put_dev(dev);
- break;
- }
-
- /* Find a new address for it */
+ /* Reset the device; full speed may morph to high speed */
+ switch (hub_port_reset(hub, port, dev, delay)) {
+ case 0: /* success, speed is known */
+ break;
+ case 1: /* disconnect, give to companion */
+ retval = -EBUSY;
+ /* FALL THROUGH */
+ default: /* error */
+ goto fail;
+ }
+ if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != dev->speed) {
+ dev_dbg(&dev->dev, "device reset changed speed!\n");
+ goto fail;
+ }
+
+ /* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
+ * it's fixed size except for full speed devices.
+ */
+ switch (dev->speed) {
+ case USB_SPEED_HIGH: /* fixed at 64 */
+ i = 64;
+ break;
+ case USB_SPEED_FULL: /* 8, 16, 32, or 64 */
+ /* to determine the ep0 maxpacket size, read the first 8
+ * bytes from the device descriptor to get bMaxPacketSize0;
+ * then correct our initial (small) guess.
+ */
+ // FALLTHROUGH
+ case USB_SPEED_LOW: /* fixed at 8 */
+ i = 8;
+ break;
+ default:
+ goto fail;
+ }
+ dev->epmaxpacketin [0] = i;
+ dev->epmaxpacketout[0] = i;
+
+ /* set the address */
+ if (dev->devnum <= 0) {
usb_choose_address(dev);
+ if (dev->devnum <= 0)
+ goto fail;
/* Set up TT records, if needed */
if (hub->tt) {
@@ -1078,12 +1108,21 @@
dev->ttport = hub->ttport;
} else if (dev->speed != USB_SPEED_HIGH
&& hub->speed == USB_SPEED_HIGH) {
+ struct usb_hub *hubstate;
+
+ hubstate = usb_get_intfdata (hub->actconfig
+ ->interface[0]);
dev->tt = &hubstate->tt;
dev->ttport = port + 1;
}
- dev_info (&dev->dev,
- "new %s speed USB device using address %d\n",
+ /* force the right log message (below) at low speed */
+ oldspeed = USB_SPEED_UNKNOWN;
+ }
+
+ dev_info (&dev->dev,
+ "%s %s speed USB device using address %d\n",
+ (oldspeed == USB_SPEED_UNKNOWN) ? "new" : "reset",
({ char *speed; switch (dev->speed) {
case USB_SPEED_LOW: speed = "low"; break;
case USB_SPEED_FULL: speed = "full"; break;
@@ -1091,23 +1130,258 @@
default: speed = "?"; break;
}; speed;}),
dev->devnum);
+
+ /* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
+ * Because device hardware and firmware is sometimes buggy in
+ * this area, and this is how Linux has done it for ages.
+ * Change it cautiously.
+ *
+ * NOTE: Windows gets the descriptor first, seemingly to help
+ * work around device bugs like "can't use addresses with bit 3
+ * set in certain configurations". Yes, really.
+ */
+ for (i = 0; i < GET_DESCRIPTOR_TRIES; ++i) {
+ for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
+ retval = usb_set_address(dev);
+ if (retval >= 0)
+ break;
+ wait_ms(200);
+ }
+ if (retval < 0) {
+ dev_err(&dev->dev,
+ "device not accepting address %d, error %d\n",
+ dev->devnum, retval);
+ fail:
+ hub_port_disable(hub, port);
+ clear_bit(dev->devnum, dev->bus->devmap.devicemap);
+ dev->devnum = -1;
+ usb_put_dev(dev);
+ up(&usb_address0_sem);
+ return retval;
+ }
+
+ /* cope with hardware quirkiness:
+ * - let SET_ADDRESS settle, some device hardware wants it
+ * - read ep0 maxpacket even for high and low speed,
+ */
+ wait_ms(10);
+ retval = usb_get_device_descriptor(dev, 8);
+ if (retval >= 8)
+ break;
+ wait_ms(100);
+ }
+ if (retval != 8) {
+ dev_err(&dev->dev, "device descriptor read/%s, error %d\n",
+ "8", retval);
+ if (retval >= 0)
+ retval = -EMSGSIZE;
+ goto fail;
+ }
+ if (dev->speed == USB_SPEED_FULL
+ && (dev->epmaxpacketin [0]
+ != dev->descriptor.bMaxPacketSize0)) {
+ usb_disable_endpoint(dev, 0);
+ usb_endpoint_running(dev, 0, 1);
+ usb_endpoint_running(dev, 0, 0);
+ dev->epmaxpacketin [0] = dev->descriptor.bMaxPacketSize0;
+ dev->epmaxpacketout[0] = dev->descriptor.bMaxPacketSize0;
+ }
+
+ retval = usb_get_device_descriptor(dev, USB_DT_DEVICE_SIZE);
+ if (retval < (signed)sizeof(dev->descriptor)) {
+ dev_err(&dev->dev, "device descriptor read/%s, error %d\n",
+ "all", retval);
+ if (retval >= 0)
+ retval = -ENOMSG;
+ goto fail;
+ }
- /* Run it through the hoops (find a driver, etc) */
- if (usb_new_device(dev) == 0) {
- hub->children[port] = dev;
- goto done;
+ /* now dev is visible to other tasks */
+ hub->children[port] = dev;
+
+ up(&usb_address0_sem);
+ return 0;
+}
+
+static void
+check_highspeed (struct usb_hub *hub, struct usb_device *dev, int port)
+{
+ struct usb_qualifier_descriptor *qual;
+ int status;
+
+ qual = kmalloc (sizeof *qual, SLAB_KERNEL);
+ if (qual == 0)
+ return;
+
+ status = usb_get_descriptor (dev, USB_DT_DEVICE_QUALIFIER, 0,
+ qual, sizeof *qual);
+ if (status == sizeof *qual) {
+ dev_info(&dev->dev, "not running at top speed; "
+ "connect to a high speed hub\n");
+ /* hub LEDs are probably harder to miss than syslog */
+ if (hub->has_indicators) {
+ hub->indicator[port] = INDICATOR_GREEN_BLINK;
+ schedule_work (&hub->leds);
}
+ }
+ kfree (qual);
+}
- /* Free the configuration if there was an error */
- usb_put_dev(dev);
+static unsigned
+hub_power_remaining (struct usb_hub *hubstate, struct usb_device *hub)
+{
+ int remaining;
+ unsigned i;
- /* Switch to a long reset time */
- delay = HUB_LONG_RESET_TIME;
+ remaining = hubstate->power_budget;
+ if (!remaining) /* self-powered */
+ return 0;
+
+ for (i = 0; i < hub->maxchild; i++) {
+ struct usb_device *dev = hub->children[i];
+ int delta;
+
+ if (!dev)
+ continue;
+
+ if (dev->actconfig)
+ delta = dev->actconfig->desc.bMaxPower;
+ else
+ delta = 50;
+ // dev_dbg(&dev->dev, "budgeted %dmA\n", 2 * delta);
+ remaining -= delta;
+ }
+ if (remaining < 0) {
+ dev_warn(&hubstate->intf->dev,
+ "%dmA over power budget!\n",
+ -2 * remaining);
+ remaining = 0;
}
+ return remaining;
+}
+
+static void hub_port_connect_change(struct usb_hub *hubstate, int port,
+ u16 portstatus, u16 portchange)
+{
+ struct usb_device *hub = interface_to_usbdev(hubstate->intf);
+ int status, i;
+
+ dev_dbg (&hubstate->intf->dev,
+ "port %d, status %04x, change %04x, %s\n",
+ port + 1, portstatus, portchange, portspeed (portstatus));
+
+ /* Clear the connection change status */
+ clear_port_feature(hub, port + 1, USB_PORT_FEAT_C_CONNECTION);
- hub_port_disable(hub, port);
+ if (hubstate->has_indicators) {
+ set_port_led(hub, hubstate, port + 1, HUB_LED_AUTO);
+ hubstate->indicator[port] = INDICATOR_AUTO;
+ }
+
+ /* Disconnect any existing devices under this port */
+ if (hub->children[port])
+ usb_disconnect(&hub->children[port]);
+
+ /* Return now if nothing is connected */
+ if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
+ if (portstatus & USB_PORT_STAT_ENABLE)
+ goto done;
+ return;
+ }
+
+ if (hub_port_debounce(hub, port)) {
+ dev_err (&hubstate->intf->dev,
+ "connect-debounce failed, port %d disabled\n",
+ port+1);
+ goto done;
+ }
+
+ for (i = 0; i < SET_CONFIG_TRIES; i++) {
+ struct usb_device *dev;
+
+ /* reallocate for each attempt, since references
+ * to the previous one can escape in various ways
+ */
+ dev = usb_alloc_dev(hub, hub->bus, port);
+ if (!dev) {
+ dev_err (&hubstate->intf->dev,
+ "couldn't allocate port %d usb_device\n", port+1);
+ goto done;
+ }
+ dev->state = USB_STATE_POWERED;
+
+ /* hub can tell if it's lowspeed already: D- pullup (not D+) */
+ if (portstatus & USB_PORT_STAT_LOW_SPEED)
+ dev->speed = USB_SPEED_LOW;
+ else
+ dev->speed = USB_SPEED_UNKNOWN;
+
+ /* reset, set address, get descriptor, add to hub's children */
+ down (&dev->serialize);
+ status = hub_port_init(hub, dev, port);
+ if (status == -EBUSY)
+ break;
+ if (status < 0)
+ continue;
+
+ /* consecutive bus-powered hubs aren't reliable; they can
+ * violate the voltage drop budget. if the new child has
+ * a "powered" LED, users should notice we didn't enable it
+ * (without reading syslog), even without per-port LEDs
+ * on the parent.
+ */
+ if (dev->descriptor.bDeviceClass == USB_CLASS_HUB
+ && hubstate->power_budget) {
+ u16 devstat;
+
+ status = usb_get_status(dev, USB_RECIP_DEVICE, 0,
+ &devstat);
+ if (status < 0) {
+ dev_dbg(&dev->dev, "get status %d ?\n", status);
+ continue;
+ }
+ cpu_to_le16s(&devstat);
+ if ((devstat & (1 << USB_DEVICE_SELF_POWERED)) == 0) {
+ dev_err(&dev->dev,
+ "can't connect bus-powered hub "
+ "to this port\n");
+ if (hubstate->has_indicators) {
+ hubstate->indicator[port] =
+ INDICATOR_AMBER_BLINK;
+ schedule_work (&hubstate->leds);
+ }
+ hub->children[port] = NULL;
+ usb_put_dev(dev);
+ hub_port_disable(hub, port);
+ return;
+ }
+ }
+
+ /* check for devices running slower than they could */
+ if (dev->descriptor.bcdUSB >= 0x0200
+ && dev->speed == USB_SPEED_FULL
+ && highspeed_hubs != 0)
+ check_highspeed (hubstate, dev, port);
+
+ /* Run it through the hoops (find a driver, etc) */
+ status = usb_new_device(dev);
+ if (status != 0) {
+ hub->children[port] = NULL;
+ continue;
+ }
+ up (&dev->serialize);
+
+ status = hub_power_remaining(hubstate, hub);
+ if (status)
+ dev_dbg(&hubstate->intf->dev,
+ "%dmA power budget left\n",
+ 2 * status);
+
+ return;
+ }
+
done:
- up(&usb_address0_sem);
+ hub_port_disable(hub, port);
}
static void hub_events(void)
@@ -1285,9 +1559,6 @@
.id_table = hub_id_table,
};
-/*
- * This should be a separate module.
- */
int usb_hub_init(void)
{
pid_t pid;
diff -Nru a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
--- a/drivers/usb/core/hub.h Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/core/hub.h Thu Apr 29 23:26:20 2004
@@ -209,6 +209,8 @@
struct semaphore khubd_sem;
struct usb_tt tt; /* Transaction Translator */
+ u8 power_budget; /* in 2mA units; or zero */
+
unsigned has_indicators:1;
enum hub_led_mode indicator[USB_MAXCHILDREN];
struct work_struct leds;
diff -Nru a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
--- a/drivers/usb/core/inode.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/core/inode.c Thu Apr 29 23:26:20 2004
@@ -717,9 +717,6 @@
while (!list_empty(&dev->filelist)) {
ds = list_entry(dev->filelist.next, struct dev_state, list);
list_del_init(&ds->list);
- down_write(&ds->devsem);
- ds->dev = NULL;
- up_write(&ds->devsem);
if (ds->discsignr) {
sinfo.si_signo = SIGPIPE;
sinfo.si_errno = EPIPE;
diff -Nru a/drivers/usb/core/message.c b/drivers/usb/core/message.c
--- a/drivers/usb/core/message.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/core/message.c Thu Apr 29 23:26:20 2004
@@ -796,10 +796,6 @@
}
}
-static void release_interface(struct device *dev)
-{
-}
-
/*
* usb_disable_device - Disable all the endpoints for a USB device
* @dev: the device whose endpoints are being disabled
@@ -835,6 +831,7 @@
dev_dbg (&dev->dev, "unregistering interface %s\n",
interface->dev.bus_id);
device_unregister (&interface->dev);
+ dev->actconfig->interface[i] = NULL;
}
dev->actconfig = 0;
if (dev->state == USB_STATE_CONFIGURED)
@@ -1071,6 +1068,16 @@
return 0;
}
+static void release_interface(struct device *dev)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct usb_interface_cache *intfc =
+ altsetting_to_usb_interface_cache(intf->altsetting);
+
+ kref_put(&intfc->ref);
+ kfree(intf);
+}
+
/*
* usb_set_configuration - Makes a particular device setting be current
* @dev: the device whose configuration is being updated
@@ -1109,19 +1116,19 @@
{
int i, ret;
struct usb_host_config *cp = NULL;
-
+ struct usb_interface *new_interfaces[USB_MAXINTERFACES];
+ int n;
+
/* dev->serialize guards all config changes */
- for (i=0; idescriptor.bNumConfigurations; i++) {
+ for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
if (dev->config[i].desc.bConfigurationValue == configuration) {
cp = &dev->config[i];
break;
}
}
- if ((!cp && configuration != 0)) {
- ret = -EINVAL;
- goto out;
- }
+ if ((!cp && configuration != 0))
+ return -EINVAL;
/* The USB spec says configuration 0 means unconfigured.
* But if a device includes a configuration numbered 0,
@@ -1130,6 +1137,25 @@
if (cp && configuration == 0)
dev_warn(&dev->dev, "config 0 descriptor??\n");
+ /* Allocate memory for new interfaces before doing anything else,
+ * so that if we run out then nothing will have changed. */
+ n = 0;
+ if (cp) {
+ for (; n < cp->desc.bNumInterfaces; ++n) {
+ new_interfaces[n] = kmalloc(
+ sizeof(struct usb_interface),
+ GFP_KERNEL);
+ if (!new_interfaces[n]) {
+ dev_err(&dev->dev, "Out of memory");
+ ret = -ENOMEM;
+free_interfaces:
+ while (--n >= 0)
+ kfree(new_interfaces[n]);
+ return ret;
+ }
+ }
+ }
+
/* if it's already configured, clear out old state first.
* getting rid of old interfaces means unbinding their drivers.
*/
@@ -1139,7 +1165,7 @@
if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
NULL, 0, HZ * USB_CTRL_SET_TIMEOUT)) < 0)
- goto out;
+ goto free_interfaces;
dev->actconfig = cp;
if (!cp)
@@ -1152,9 +1178,17 @@
* maybe probe() calls will choose different altsettings.
*/
for (i = 0; i < cp->desc.bNumInterfaces; ++i) {
- struct usb_interface *intf = cp->interface[i];
+ struct usb_interface_cache *intfc;
+ struct usb_interface *intf;
struct usb_host_interface *alt;
+ cp->interface[i] = intf = new_interfaces[i];
+ memset(intf, 0, sizeof(*intf));
+ intfc = cp->intf_cache[i];
+ intf->altsetting = intfc->altsetting;
+ intf->num_altsetting = intfc->num_altsetting;
+ kref_get(&intfc->ref);
+
alt = usb_altnum_to_altsetting(intf, 0);
/* No altsetting 0? We'll assume the first altsetting.
@@ -1204,7 +1238,6 @@
}
}
-out:
return ret;
}
diff -Nru a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
--- a/drivers/usb/core/urb.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/core/urb.c Thu Apr 29 23:26:20 2004
@@ -13,6 +13,14 @@
#include
#include "hcd.h"
+#define to_urb(d) container_of(d, struct urb, kref)
+
+static void urb_destroy(struct kref *kref)
+{
+ struct urb *urb = to_urb(kref);
+ kfree(urb);
+}
+
/**
* usb_init_urb - initializes a urb so that it can be used by a USB driver
* @urb: pointer to the urb to initialize
@@ -31,7 +39,7 @@
{
if (urb) {
memset(urb, 0, sizeof(*urb));
- urb->count = (atomic_t)ATOMIC_INIT(1);
+ kref_init(&urb->kref, urb_destroy);
spin_lock_init(&urb->lock);
}
}
@@ -80,8 +88,7 @@
void usb_free_urb(struct urb *urb)
{
if (urb)
- if (atomic_dec_and_test(&urb->count))
- kfree(urb);
+ kref_put(&urb->kref);
}
/**
@@ -96,11 +103,9 @@
*/
struct urb * usb_get_urb(struct urb *urb)
{
- if (urb) {
- atomic_inc(&urb->count);
- return urb;
- } else
- return NULL;
+ if (urb)
+ kref_get(&urb->kref);
+ return urb;
}
diff -Nru a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
--- a/drivers/usb/core/usb.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/core/usb.c Thu Apr 29 23:26:20 2004
@@ -1064,92 +1064,29 @@
}
/*
- * By the time we get here, we chose a new device address
- * and is in the default state. We need to identify the thing and
- * get the ball rolling..
+ * usb_new_device - perform initial device setup (usbcore-internal)
+ * @dev: newly addressed device (in ADDRESS state)
*
- * Returns 0 for success, != 0 for error.
+ * This is called with devices which have been enumerated, but not yet
+ * configured. The device descriptor is available, but not descriptors
+ * for any device configuration. The caller owns dev->serialize, and
+ * the device is not visible through sysfs or other filesystem code.
+ *
+ * Returns 0 for success (device is configured and listed, with its
+ * interfaces, in sysfs); else a negative errno value. On error, one
+ * reference count to the device has been dropped.
*
* This call is synchronous, and may not be used in an interrupt context.
*
* Only the hub driver should ever call this; root hub registration
* uses it only indirectly.
*/
-#define NEW_DEVICE_RETRYS 2
-#define SET_ADDRESS_RETRYS 2
int usb_new_device(struct usb_device *dev)
{
- int err = -EINVAL;
+ int err;
int i;
- int j;
int config;
- /* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
- * it's fixed size except for full speed devices.
- */
- switch (dev->speed) {
- case USB_SPEED_HIGH: /* fixed at 64 */
- i = 64;
- break;
- case USB_SPEED_FULL: /* 8, 16, 32, or 64 */
- /* to determine the ep0 maxpacket size, read the first 8
- * bytes from the device descriptor to get bMaxPacketSize0;
- * then correct our initial (small) guess.
- */
- // FALLTHROUGH
- case USB_SPEED_LOW: /* fixed at 8 */
- i = 8;
- break;
- default:
- goto fail;
- }
- dev->epmaxpacketin [0] = i;
- dev->epmaxpacketout[0] = i;
-
- for (i = 0; i < NEW_DEVICE_RETRYS; ++i) {
-
- for (j = 0; j < SET_ADDRESS_RETRYS; ++j) {
- err = usb_set_address(dev);
- if (err >= 0)
- break;
- wait_ms(200);
- }
- if (err < 0) {
- dev_err(&dev->dev,
- "device not accepting address %d, error %d\n",
- dev->devnum, err);
- goto fail;
- }
-
- wait_ms(10); /* Let the SET_ADDRESS settle */
-
- /* high and low speed devices don't need this... */
- err = usb_get_device_descriptor(dev, 8);
- if (err >= 8)
- break;
- wait_ms(100);
- }
-
- if (err < 8) {
- dev_err(&dev->dev, "device descriptor read/8, error %d\n", err);
- goto fail;
- }
- if (dev->speed == USB_SPEED_FULL) {
- usb_disable_endpoint(dev, 0);
- usb_endpoint_running(dev, 0, 1);
- usb_endpoint_running(dev, 0, 0);
- dev->epmaxpacketin [0] = dev->descriptor.bMaxPacketSize0;
- dev->epmaxpacketout[0] = dev->descriptor.bMaxPacketSize0;
- }
-
- /* USB device state == addressed ... still not usable */
-
- err = usb_get_device_descriptor(dev, sizeof(dev->descriptor));
- if (err != (signed)sizeof(dev->descriptor)) {
- dev_err(&dev->dev, "device descriptor read/all, error %d\n", err);
- goto fail;
- }
-
err = usb_get_configuration(dev);
if (err < 0) {
dev_err(&dev->dev, "can't read configurations, error %d\n",
@@ -1170,13 +1107,10 @@
usb_show_string(dev, "SerialNumber", dev->descriptor.iSerialNumber);
#endif
- down(&dev->serialize);
-
/* put device-specific files into sysfs */
err = device_add (&dev->dev);
if (err) {
dev_err(&dev->dev, "can't device_add, error %d\n", err);
- up(&dev->serialize);
goto fail;
}
usb_create_driverfs_dev_files (dev);
@@ -1193,7 +1127,7 @@
/* heuristic: Linux is more likely to have class
* drivers, so avoid vendor-specific interfaces.
*/
- desc = &dev->config[i].interface[0]
+ desc = &dev->config[i].intf_cache[0]
->altsetting->desc;
if (desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC)
continue;
@@ -1211,7 +1145,6 @@
dev->descriptor.bNumConfigurations);
}
err = usb_set_configuration(dev, config);
- up(&dev->serialize);
if (err) {
dev_err(&dev->dev, "can't set config #%d, error %d\n",
config, err);
@@ -1226,9 +1159,10 @@
return 0;
fail:
- dev->state = USB_STATE_DEFAULT;
+ dev->state = USB_STATE_NOTATTACHED;
clear_bit(dev->devnum, dev->bus->devmap.devicemap);
dev->devnum = -1;
+ usb_put_dev(dev);
return err;
}
@@ -1577,20 +1511,40 @@
*/
static int __init usb_init(void)
{
+ int retval;
if (nousb) {
pr_info ("%s: USB support disabled\n", usbcore_name);
return 0;
}
- bus_register(&usb_bus_type);
+ retval = bus_register(&usb_bus_type);
+ if (retval)
+ goto out;
usb_host_init();
- usb_major_init();
- usbfs_init();
- usb_hub_init();
-
- driver_register(&usb_generic_driver);
-
- return 0;
+ retval = usb_major_init();
+ if (retval)
+ goto major_init_failed;
+ retval = usbfs_init();
+ if (retval)
+ goto fs_init_failed;
+ retval = usb_hub_init();
+ if (retval)
+ goto hub_init_failed;
+
+ retval = driver_register(&usb_generic_driver);
+ if (!retval)
+ goto out;
+
+ usb_hub_cleanup();
+hub_init_failed:
+ usbfs_cleanup();
+fs_init_failed:
+ usb_major_cleanup();
+major_init_failed:
+ usb_host_cleanup();
+ bus_unregister(&usb_bus_type);
+out:
+ return retval;
}
/*
diff -Nru a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
--- a/drivers/usb/host/ehci-hcd.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/host/ehci-hcd.c Thu Apr 29 23:26:20 2004
@@ -965,7 +965,7 @@
goto rescan;
case QH_STATE_IDLE: /* fully unlinked */
if (list_empty (&qh->qtd_list)) {
- qh_put (ehci, qh);
+ qh_put (qh);
break;
}
/* else FALL THROUGH */
diff -Nru a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
--- a/drivers/usb/host/ehci-mem.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/host/ehci-mem.c Thu Apr 29 23:26:20 2004
@@ -87,6 +87,22 @@
}
+static void qh_destroy (struct kref *kref)
+{
+ struct ehci_qh *qh = container_of(kref, struct ehci_qh, kref);
+ struct ehci_hcd *ehci = qh->ehci;
+
+ /* clean qtds first, and know this is not linked */
+ if (!list_empty (&qh->qtd_list) || qh->qh_next.ptr) {
+ ehci_dbg (ehci, "unused qh not empty!\n");
+ BUG ();
+ }
+ if (qh->dummy)
+ ehci_qtd_free (ehci, qh->dummy);
+ usb_put_dev (qh->dev);
+ dma_pool_free (ehci->qh_pool, qh, qh->qh_dma);
+}
+
static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, int flags)
{
struct ehci_qh *qh;
@@ -98,7 +114,8 @@
return qh;
memset (qh, 0, sizeof *qh);
- atomic_set (&qh->refcount, 1);
+ kref_init(&qh->kref, qh_destroy);
+ qh->ehci = ehci;
qh->qh_dma = dma;
// INIT_LIST_HEAD (&qh->qh_list);
INIT_LIST_HEAD (&qh->qtd_list);
@@ -114,25 +131,15 @@
}
/* to share a qh (cpu threads, or hc) */
-static inline struct ehci_qh *qh_get (/* ehci, */ struct ehci_qh *qh)
+static inline struct ehci_qh *qh_get (struct ehci_qh *qh)
{
- atomic_inc (&qh->refcount);
+ kref_get(&qh->kref);
return qh;
}
-static void qh_put (struct ehci_hcd *ehci, struct ehci_qh *qh)
+static inline void qh_put (struct ehci_qh *qh)
{
- if (!atomic_dec_and_test (&qh->refcount))
- return;
- /* clean qtds first, and know this is not linked */
- if (!list_empty (&qh->qtd_list) || qh->qh_next.ptr) {
- ehci_dbg (ehci, "unused qh not empty!\n");
- BUG ();
- }
- if (qh->dummy)
- ehci_qtd_free (ehci, qh->dummy);
- usb_put_dev (qh->dev);
- dma_pool_free (ehci->qh_pool, qh, qh->qh_dma);
+ kref_put(&qh->kref);
}
/*-------------------------------------------------------------------------*/
@@ -145,7 +152,7 @@
static void ehci_mem_cleanup (struct ehci_hcd *ehci)
{
if (ehci->async)
- qh_put (ehci, ehci->async);
+ qh_put (ehci->async);
ehci->async = 0;
/* DMA consistent memory and pools */
diff -Nru a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
--- a/drivers/usb/host/ehci-q.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/host/ehci-q.c Thu Apr 29 23:26:20 2004
@@ -193,7 +193,7 @@
/* ... update hc-wide periodic stats (for usbfs) */
hcd_to_bus (&ehci->hcd)->bandwidth_int_reqs--;
}
- qh_put (ehci, qh);
+ qh_put (qh);
}
spin_lock (&urb->lock);
@@ -708,7 +708,7 @@
default:
dbg ("bogus dev %p speed %d", urb->dev, urb->dev->speed);
done:
- qh_put (ehci, qh);
+ qh_put (qh);
return 0;
}
@@ -951,7 +951,7 @@
// qh->hw_next = cpu_to_le32 (qh->qh_dma);
qh->qh_state = QH_STATE_IDLE;
qh->qh_next.qh = 0;
- qh_put (ehci, qh); // refcount from reclaim
+ qh_put (qh); // refcount from reclaim
/* other unlink(s) may be pending (in QH_STATE_UNLINK_WAIT) */
next = qh->reclaim;
@@ -965,7 +965,7 @@
&& HCD_IS_RUNNING (ehci->hcd.state))
qh_link_async (ehci, qh);
else {
- qh_put (ehci, qh); // refcount from async list
+ qh_put (qh); // refcount from async list
/* it's not free to turn the async schedule on/off; leave it
* active but idle for a while once it empties.
@@ -1067,7 +1067,7 @@
qh = qh_get (qh);
qh->stamp = ehci->stamp;
temp = qh_completions (ehci, qh, regs);
- qh_put (ehci, qh);
+ qh_put (qh);
if (temp != 0) {
goto rescan;
}
diff -Nru a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
--- a/drivers/usb/host/ehci-sched.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/host/ehci-sched.c Thu Apr 29 23:26:20 2004
@@ -312,7 +312,7 @@
do {
periodic_unlink (ehci, frame, qh);
- qh_put (ehci, qh);
+ qh_put (qh);
frame += qh->period;
} while (frame < ehci->periodic_size);
@@ -355,7 +355,7 @@
dbg ("descheduled qh %p, period = %d frame = %d count = %d, urbs = %d",
qh, qh->period, frame,
- atomic_read (&qh->refcount), ehci->periodic_sched);
+ atomic_read (&qh->kref.refcount), ehci->periodic_sched);
}
static int check_period (
@@ -1846,7 +1846,7 @@
modified = qh_completions (ehci, temp.qh, regs);
if (unlikely (list_empty (&temp.qh->qtd_list)))
intr_deschedule (ehci, temp.qh, 0);
- qh_put (ehci, temp.qh);
+ qh_put (temp.qh);
break;
case Q_TYPE_FSTN:
/* for "save place" FSTNs, look at QH entries
diff -Nru a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
--- a/drivers/usb/host/ehci.h Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/host/ehci.h Thu Apr 29 23:26:20 2004
@@ -366,7 +366,8 @@
struct ehci_qtd *dummy;
struct ehci_qh *reclaim; /* next to reclaim */
- atomic_t refcount;
+ struct ehci_hcd *ehci;
+ struct kref kref;
unsigned stamp;
u8 qh_state;
diff -Nru a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
--- a/drivers/usb/host/uhci-hcd.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/host/uhci-hcd.c Thu Apr 29 23:26:20 2004
@@ -157,8 +157,8 @@
return td;
}
-static inline void uhci_fill_td(struct uhci_td *td, __u32 status,
- __u32 token, __u32 buffer)
+static inline void uhci_fill_td(struct uhci_td *td, u32 status,
+ u32 token, u32 buffer)
{
td->status = cpu_to_le32(status);
td->token = cpu_to_le32(token);
@@ -184,11 +184,11 @@
list_add_tail(&td->fl_list, &ftd->fl_list);
td->link = ltd->link;
- mb();
+ wmb();
ltd->link = cpu_to_le32(td->dma_handle);
} else {
td->link = uhci->fl->frame[framenum];
- mb();
+ wmb();
uhci->fl->frame[framenum] = cpu_to_le32(td->dma_handle);
uhci->fl->frame_cpu[framenum] = td;
}
@@ -218,7 +218,7 @@
ptd->link = td->link;
}
- mb();
+ wmb();
td->link = UHCI_PTR_TERM;
list_del_init(&td->fl_list);
@@ -332,17 +332,7 @@
/* Grab the last QH */
lqh = list_entry(skelqh->list.prev, struct uhci_qh, list);
- /*
- * Patch this endpoint's URB's QHs to point to the next skelqh:
- * skelqh --> ... lqh --> newqh --> next skelqh
- * Do this first, so the HC always sees the right QH after this one.
- */
- list_for_each (tmp, &urbp->queue_list) {
- struct urb_priv *turbp =
- list_entry(tmp, struct urb_priv, queue_list);
-
- turbp->qh->link = lqh->link;
- }
+ /* Point to the next skelqh */
urbp->qh->link = lqh->link;
wmb(); /* Ordering is important */
@@ -362,15 +352,15 @@
*
* The HC could see (and use!) any of these as we write them.
*/
+ lqh->link = cpu_to_le32(urbp->qh->dma_handle) | UHCI_PTR_QH;
if (lqh->urbp) {
list_for_each (tmp, &lqh->urbp->queue_list) {
struct urb_priv *turbp =
list_entry(tmp, struct urb_priv, queue_list);
- turbp->qh->link = cpu_to_le32(urbp->qh->dma_handle) | UHCI_PTR_QH;
+ turbp->qh->link = lqh->link;
}
}
- lqh->link = cpu_to_le32(urbp->qh->dma_handle) | UHCI_PTR_QH;
list_add_tail(&urbp->qh->list, &skelqh->list);
}
@@ -382,7 +372,7 @@
static void uhci_remove_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
{
struct uhci_qh *pqh;
- __u32 newlink;
+ u32 newlink;
if (!qh)
return;
@@ -423,7 +413,7 @@
turbp->qh->link = newlink;
}
}
- mb();
+ wmb();
/* Leave qh->link in case the HC is on the QH now, it will */
/* continue the rest of the schedule */
@@ -510,7 +500,7 @@
/* All qh's in the queue need to link to the next queue */
urbp->qh->link = eurbp->qh->link;
- mb(); /* Make sure we flush everything */
+ wmb(); /* Make sure we flush everything */
lltd->link = cpu_to_le32(urbp->qh->dma_handle) | UHCI_PTR_QH;
@@ -1044,9 +1034,13 @@
usb_pipeout(urb->pipe));
}
- /* Set the flag on the last packet */
- if (!(urb->transfer_flags & URB_NO_INTERRUPT))
- td->status |= cpu_to_le32(TD_CTRL_IOC);
+ /* Set the interrupt-on-completion flag on the last packet.
+ * A more-or-less typical 4 KB URB (= size of one memory page)
+ * will require about 3 ms to transfer; that's a little on the
+ * fast side but not enough to justify delaying an interrupt
+ * more than 2 or 3 URBs, so we will ignore the URB_NO_INTERRUPT
+ * flag setting. */
+ td->status |= cpu_to_le32(TD_CTRL_IOC);
qh = uhci_alloc_qh(uhci, urb->dev);
if (!qh)
@@ -1786,6 +1780,9 @@
spin_unlock(&uhci->schedule_lock);
+ /* Wake up anyone waiting for an URB to complete */
+ wake_up_all(&uhci->waitqh);
+
return IRQ_HANDLED;
}
@@ -2086,6 +2083,8 @@
INIT_LIST_HEAD(&uhci->complete_list);
+ init_waitqueue_head(&uhci->waitqh);
+
uhci->fl = dma_alloc_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
&dma_handle, 0);
if (!uhci->fl) {
@@ -2296,6 +2295,9 @@
uhci_free_pending_qhs(uhci);
uhci_free_pending_tds(uhci);
spin_unlock_irq(&uhci->schedule_lock);
+
+ /* Wake up anyone waiting for an URB to complete */
+ wake_up_all(&uhci->waitqh);
release_uhci(uhci);
}
@@ -2361,6 +2363,46 @@
kfree(hcd_to_uhci(hcd));
}
+/* Are there any URBs for a particular device/endpoint on a given list? */
+static int urbs_for_ep_list(struct list_head *head,
+ struct hcd_dev *hdev, int ep)
+{
+ struct urb_priv *urbp;
+
+ list_for_each_entry(urbp, head, urb_list) {
+ struct urb *urb = urbp->urb;
+
+ if (hdev == urb->dev->hcpriv && ep ==
+ (usb_pipeendpoint(urb->pipe) |
+ usb_pipein(urb->pipe)))
+ return 1;
+ }
+ return 0;
+}
+
+/* Are there any URBs for a particular device/endpoint? */
+static int urbs_for_ep(struct uhci_hcd *uhci, struct hcd_dev *hdev, int ep)
+{
+ int rc;
+
+ spin_lock_irq(&uhci->schedule_lock);
+ rc = (urbs_for_ep_list(&uhci->urb_list, hdev, ep) ||
+ urbs_for_ep_list(&uhci->complete_list, hdev, ep) ||
+ urbs_for_ep_list(&uhci->urb_remove_list, hdev, ep));
+ spin_unlock_irq(&uhci->schedule_lock);
+ return rc;
+}
+
+/* Wait until all the URBs for a particular device/endpoint are gone */
+static void uhci_hcd_endpoint_disable(struct usb_hcd *hcd,
+ struct hcd_dev *hdev, int endpoint)
+{
+ struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+
+ wait_event_interruptible(uhci->waitqh,
+ !urbs_for_ep(uhci, hdev, endpoint));
+}
+
static int uhci_hcd_get_frame_number(struct usb_hcd *hcd)
{
return uhci_get_current_frame_number(hcd_to_uhci(hcd));
@@ -2390,6 +2432,7 @@
.urb_enqueue = uhci_urb_enqueue,
.urb_dequeue = uhci_urb_dequeue,
+ .endpoint_disable = uhci_hcd_endpoint_disable,
.get_frame_number = uhci_hcd_get_frame_number,
.hub_status_data = uhci_hub_status_data,
diff -Nru a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
--- a/drivers/usb/host/uhci-hcd.h Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/host/uhci-hcd.h Thu Apr 29 23:26:20 2004
@@ -80,7 +80,7 @@
#define CAN_SCHEDULE_FRAMES 1000 /* how far future frames can be scheduled */
struct uhci_frame_list {
- __u32 frame[UHCI_NUMFRAMES];
+ u32 frame[UHCI_NUMFRAMES];
void *frame_cpu[UHCI_NUMFRAMES];
@@ -105,8 +105,8 @@
*/
struct uhci_qh {
/* Hardware fields */
- __u32 link; /* Next queue */
- __u32 element; /* Queue element pointer */
+ u32 link; /* Next queue */
+ u32 element; /* Queue element pointer */
/* Software fields */
dma_addr_t dma_handle;
@@ -185,10 +185,10 @@
*/
struct uhci_td {
/* Hardware fields */
- __u32 link;
- __u32 status;
- __u32 token;
- __u32 buffer;
+ u32 link;
+ u32 status;
+ u32 token;
+ u32 buffer;
/* Software fields */
dma_addr_t dma_handle;
@@ -370,6 +370,8 @@
int rh_numports;
struct timer_list stall_timer;
+
+ wait_queue_head_t waitqh; /* endpoint_disable waiters */
};
struct urb_priv {
diff -Nru a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
--- a/drivers/usb/input/hid-core.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/input/hid-core.c Thu Apr 29 23:26:20 2004
@@ -1412,6 +1412,14 @@
#define USB_VENDOR_ID_CHIC 0x05fe
#define USB_DEVICE_ID_CHIC_GAMEPAD 0x0014
+#define USB_VENDOR_ID_GLAB 0x06c2
+#define USB_DEVICE_ID_4_PHIDGETSERVO_30 0x0038
+#define USB_DEVICE_ID_1_PHIDGETSERVO_30 0x0039
+
+#define USB_VENDOR_ID_WISEGROUP 0x0925
+#define USB_DEVICE_ID_1_PHIDGETSERVO_20 0x8101
+#define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104
+
struct hid_blacklist {
__u16 idVendor;
__u16 idProduct;
@@ -1459,6 +1467,10 @@
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
diff -Nru a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c
--- a/drivers/usb/input/mtouchusb.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/input/mtouchusb.c Thu Apr 29 23:26:20 2004
@@ -28,6 +28,12 @@
* Complete rewrite using Linux Input in 2.6.3
* Unfortunately no calibration support at this time
*
+ * 1.4 04/25/2004 (TEJ) tejohnson@yahoo.com
+ * Changed reset from standard USB dev reset to vendor reset
+ * Changed data sent to host from compensated to raw coordinates
+ * Eliminated vendor/product module params
+ * Performed multiple successfull tests with an EXII-5010UC
+ *
*****************************************************************************/
#include
@@ -45,25 +51,28 @@
#include
#include
-#define MTOUCHUSB_MIN_XC 0xc8
-#define MTOUCHUSB_MAX_XC 0xff78
+#define MTOUCHUSB_MIN_XC 0x0
+#define MTOUCHUSB_MAX_XC 0x4000
#define MTOUCHUSB_XC_FUZZ 0x0
#define MTOUCHUSB_XC_FLAT 0x0
#define MTOUCHUSB_MIN_YC 0x0
-#define MTOUCHUSB_MAX_YC 0xff78
+#define MTOUCHUSB_MAX_YC 0x4000
#define MTOUCHUSB_YC_FUZZ 0x0
#define MTOUCHUSB_YC_FLAT 0x0
-#define MTOUCHUSB_ASYC_REPORT 1
-#define MTOUCHUSB_REPORT_SIZE_DATA 11
+
+#define MTOUCHUSB_ASYNC_REPORT 1
+#define MTOUCHUSB_RESET 7
+#define MTOUCHUSB_REPORT_DATA_SIZE 11
#define MTOUCHUSB_REQ_CTRLLR_ID 10
-#define MTOUCHUSB_GET_XC(data) (data[4]<<8 | data[3])
-#define MTOUCHUSB_GET_YC(data) (data[6]<<8 | data[5])
+#define MTOUCHUSB_GET_XC(data) (data[8]<<8 | data[7])
+#define MTOUCHUSB_GET_YC(data) (data[10]<<8 | data[9])
#define MTOUCHUSB_GET_TOUCHED(data) ((data[2] & 0x40) ? 1:0)
-#define DRIVER_VERSION "v0.1"
+#define DRIVER_VERSION "v1.4"
#define DRIVER_AUTHOR "Todd E. Johnson, tejohnson@yahoo.com"
-#define DRIVER_DESC "Microtouch USB HID Touchscreen Driver"
+#define DRIVER_DESC "3M USB Touchscreen Driver"
+#define DRIVER_LICENSE "GPL"
struct mtouch_usb {
unsigned char *data;
@@ -76,11 +85,9 @@
char phys[64];
};
-static __s32 vendor=-1, product=-1;
-
static struct usb_device_id mtouchusb_devices [] = {
- { USB_DEVICE(0x0596, 0x0001) }, /* 3M (Formerly MicroTouch) 14-206 */
- { } /* Terminating entry */
+ { USB_DEVICE(0x0596, 0x0001) },
+ { }
};
static void mtouchusb_irq(struct urb *urb, struct pt_regs *regs)
@@ -153,7 +160,7 @@
{
dbg("%s - called", __FUNCTION__);
- mtouch->data = usb_buffer_alloc(udev, MTOUCHUSB_REPORT_SIZE_DATA,
+ mtouch->data = usb_buffer_alloc(udev, MTOUCHUSB_REPORT_DATA_SIZE,
SLAB_ATOMIC, &mtouch->data_dma);
if (!mtouch->data)
@@ -167,7 +174,7 @@
dbg("%s - called", __FUNCTION__);
if (mtouch->data)
- usb_buffer_free(udev, MTOUCHUSB_REPORT_SIZE_DATA,
+ usb_buffer_free(udev, MTOUCHUSB_REPORT_DATA_SIZE,
mtouch->data, mtouch->data_dma);
}
@@ -180,41 +187,8 @@
char path[64];
char *buf;
int nRet;
- int ix;
- char valid_device = 0;
dbg("%s - called", __FUNCTION__);
- if (vendor != -1 && product != -1) {
- info("%s - User specified USB Touch -- Vend:Prod - %x:%x",
- __FUNCTION__, vendor, product);
- }
-
- for (ix = 0; ix < sizeof (mtouchusb_devices) /
- sizeof (struct usb_device_id); ix++) {
- if ((udev->descriptor.idVendor ==
- mtouchusb_devices [ix].idVendor) &&
- (udev->descriptor.idProduct ==
- mtouchusb_devices [ix].idProduct)) {
- valid_device = 1;
- break;
- }
- }
-
- if (udev->descriptor.idVendor == vendor &&
- udev->descriptor.idProduct == product) { /* User specified */
- valid_device = 1;
- }
-
- if (!valid_device) {
- err("%s - No valid device!", __FUNCTION__);
- return -EIO;
- }
-
- if (udev->descriptor.bNumConfigurations != 1) {
- err("%s - Only one device configuration is supported.",
- __FUNCTION__);
- return -EIO;
- }
dbg("%s - setting interface", __FUNCTION__);
interface = intf->cur_altsetting;
@@ -222,11 +196,6 @@
dbg("%s - setting endpoint", __FUNCTION__);
endpoint = &interface->endpoint[0].desc;
- if (interface->desc.bNumEndpoints != 1) {
- err("%s - Only one endpoint is supported.", __FUNCTION__);
- return -EIO;
- }
-
if (!(mtouch = kmalloc (sizeof (struct mtouch_usb), GFP_KERNEL))) {
err("%s - Out of memory.", __FUNCTION__);
return -ENOMEM;
@@ -266,8 +235,8 @@
mtouch->input.absmax[ABS_X] = MTOUCHUSB_MAX_XC;
mtouch->input.absfuzz[ABS_X] = MTOUCHUSB_XC_FUZZ;
mtouch->input.absflat[ABS_X] = MTOUCHUSB_XC_FLAT;
- mtouch->input.absmin[ABS_Y] = MTOUCHUSB_MAX_YC;
- mtouch->input.absmax[ABS_Y] = MTOUCHUSB_MIN_YC;
+ mtouch->input.absmin[ABS_Y] = MTOUCHUSB_MIN_YC;
+ mtouch->input.absmax[ABS_Y] = MTOUCHUSB_MAX_YC;
mtouch->input.absfuzz[ABS_Y] = MTOUCHUSB_YC_FUZZ;
mtouch->input.absflat[ABS_Y] = MTOUCHUSB_YC_FLAT;
@@ -290,15 +259,15 @@
kfree(buf);
nRet = usb_control_msg(mtouch->udev,
- usb_rcvctrlpipe(udev, 0x80),
- USB_REQ_GET_CONFIGURATION,
- USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+ usb_rcvctrlpipe(udev, 0),
+ MTOUCHUSB_RESET,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 1,
0,
- 0x81,
NULL,
0,
HZ * USB_CTRL_SET_TIMEOUT);
- dbg("%s - usb_control_msg - USB_REQ_GET_CONFIGURATION - bytes|err: %d",
+ dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d",
__FUNCTION__, nRet);
dbg("%s - usb_alloc_urb: mtouch->irq", __FUNCTION__);
@@ -315,7 +284,7 @@
mtouch->udev,
usb_rcvintpipe(mtouch->udev, 0x81),
mtouch->data,
- MTOUCHUSB_REPORT_SIZE_DATA,
+ MTOUCHUSB_REPORT_DATA_SIZE,
mtouchusb_irq,
mtouch,
endpoint->bInterval);
@@ -324,15 +293,15 @@
input_register_device(&mtouch->input);
nRet = usb_control_msg(mtouch->udev,
- usb_rcvctrlpipe(udev, 0x80),
- MTOUCHUSB_ASYC_REPORT,
+ usb_rcvctrlpipe(udev, 0),
+ MTOUCHUSB_ASYNC_REPORT,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- MTOUCHUSB_ASYC_REPORT,
- MTOUCHUSB_ASYC_REPORT,
+ 1,
+ 1,
NULL,
0,
HZ * USB_CTRL_SET_TIMEOUT);
- dbg("%s - usb_control_msg - MTOUCHUSB_ASYC_REPORT - bytes|err: %d",
+ dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
__FUNCTION__, nRet);
printk(KERN_INFO "input: %s on %s\n", mtouch->name, path);
@@ -383,9 +352,3 @@
MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_LICENSE("GPL");
-MODULE_PARM(vendor, "i");
-MODULE_PARM_DESC(vendor, "User specified USB idVendor");
-MODULE_PARM(product, "i");
-MODULE_PARM_DESC(product, "User specified USB idProduct");
-
-
diff -Nru a/drivers/usb/media/ibmcam.c b/drivers/usb/media/ibmcam.c
--- a/drivers/usb/media/ibmcam.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/media/ibmcam.c Thu Apr 29 23:26:20 2004
@@ -3647,7 +3647,7 @@
{
struct usb_device *dev = interface_to_usbdev(intf);
struct uvd *uvd = NULL;
- int i, nas, model=0, canvasX=0, canvasY=0;
+ int ix, i, nas, model=0, canvasX=0, canvasY=0;
int actInterface=-1, inactInterface=-1, maxPS=0;
__u8 ifnum = intf->altsetting->desc.bInterfaceNumber;
unsigned char video_ep = 0;
@@ -3718,7 +3718,7 @@
} while (0);
/* Validate found interface: must have one ISO endpoint */
- nas = dev->actconfig->interface[ifnum]->num_altsetting;
+ nas = intf->num_altsetting;
if (debug > 0)
info("Number of alternate settings=%d.", nas);
if (nas < 2) {
@@ -3726,11 +3726,12 @@
return -ENODEV;
}
/* Validate all alternate settings */
- for (i=0; i < nas; i++) {
+ for (ix=0; ix < nas; ix++) {
const struct usb_host_interface *interface;
const struct usb_endpoint_descriptor *endpoint;
- interface = &dev->actconfig->interface[ifnum]->altsetting[i];
+ interface = &intf->altsetting[ix];
+ i = interface->desc.bAlternateSetting;
if (interface->desc.bNumEndpoints != 1) {
err("Interface %d. has %u. endpoints!",
ifnum, (unsigned)(interface->desc.bNumEndpoints));
diff -Nru a/drivers/usb/media/konicawc.c b/drivers/usb/media/konicawc.c
--- a/drivers/usb/media/konicawc.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/media/konicawc.c Thu Apr 29 23:26:20 2004
@@ -381,9 +381,15 @@
int i, errFlag;
struct konicawc *cam = (struct konicawc *)uvd->user_data;
int pktsz;
- struct usb_host_interface *interface;
+ struct usb_interface *intf;
+ struct usb_host_interface *interface = NULL;
- interface = &dev->actconfig->interface[uvd->iface]->altsetting[spd_to_iface[cam->speed]];
+ intf = usb_ifnum_to_if(dev, uvd->iface);
+ if (intf)
+ interface = usb_altnum_to_altsetting(intf,
+ spd_to_iface[cam->speed]);
+ if (!interface)
+ return -ENXIO;
pktsz = interface->endpoint[1].desc.wMaxPacketSize;
DEBUG(1, "pktsz = %d", pktsz);
if (!CAMERA_IS_OPERATIONAL(uvd)) {
@@ -721,7 +727,7 @@
{
struct usb_device *dev = interface_to_usbdev(intf);
struct uvd *uvd = NULL;
- int i, nas;
+ int ix, i, nas;
int actInterface=-1, inactInterface=-1, maxPS=0;
unsigned char video_ep = 0;
@@ -741,11 +747,12 @@
return -ENODEV;
}
/* Validate all alternate settings */
- for (i=0; i < nas; i++) {
+ for (ix=0; ix < nas; ix++) {
const struct usb_host_interface *interface;
const struct usb_endpoint_descriptor *endpoint;
- interface = &intf->altsetting[i];
+ interface = &intf->altsetting[ix];
+ i = interface->desc.bAlternateSetting;
if (interface->desc.bNumEndpoints != 2) {
err("Interface %d. has %u. endpoints!",
interface->desc.bInterfaceNumber,
diff -Nru a/drivers/usb/media/ov511.c b/drivers/usb/media/ov511.c
--- a/drivers/usb/media/ov511.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/media/ov511.c Thu Apr 29 23:26:20 2004
@@ -5603,8 +5603,16 @@
if (ov->bridge == BRG_OV518)
{
- struct usb_interface *ifp = ov->dev->config[0].interface[0];
- __u16 mxps = ifp->altsetting[7].endpoint[0].desc.wMaxPacketSize;
+ struct usb_interface *ifp;
+ struct usb_host_interface *alt;
+ __u16 mxps = 0;
+
+ ifp = usb_ifnum_to_if(ov->dev, 0);
+ if (ifp) {
+ alt = usb_altnum_to_altsetting(ifp, 7);
+ if (alt)
+ mxps = alt->endpoint[0].desc.wMaxPacketSize;
+ }
/* Some OV518s have packet numbering by default, some don't */
if (mxps == 897)
@@ -5805,7 +5813,7 @@
if (dev->descriptor.bNumConfigurations != 1)
return -ENODEV;
- idesc = &intf->altsetting[0].desc;
+ idesc = &intf->cur_altsetting->desc;
if (idesc->bInterfaceClass != 0xFF)
return -ENODEV;
diff -Nru a/drivers/usb/media/pwc-if.c b/drivers/usb/media/pwc-if.c
--- a/drivers/usb/media/pwc-if.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/media/pwc-if.c Thu Apr 29 23:26:20 2004
@@ -789,7 +789,8 @@
struct urb *urb;
int i, j, ret;
- struct usb_host_interface *idesc;
+ struct usb_interface *intf;
+ struct usb_host_interface *idesc = NULL;
if (pdev == NULL)
return -EFAULT;
@@ -801,7 +802,9 @@
/* Get the current alternate interface, adjust packet size */
if (!udev->actconfig)
return -EFAULT;
- idesc = &udev->actconfig->interface[0]->altsetting[pdev->valternate];
+ intf = usb_ifnum_to_if(udev, 0);
+ if (intf)
+ idesc = usb_altnum_to_altsetting(intf, pdev->valternate);
if (!idesc)
return -EFAULT;
diff -Nru a/drivers/usb/media/se401.c b/drivers/usb/media/se401.c
--- a/drivers/usb/media/se401.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/media/se401.c Thu Apr 29 23:26:20 2004
@@ -1326,7 +1326,7 @@
if (dev->descriptor.bNumConfigurations != 1)
return -ENODEV;
- interface = &intf->altsetting[0].desc;
+ interface = &intf->cur_altsetting->desc;
/* Is it an se401? */
if (dev->descriptor.idVendor == 0x03e8 &&
diff -Nru a/drivers/usb/media/ultracam.c b/drivers/usb/media/ultracam.c
--- a/drivers/usb/media/ultracam.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/media/ultracam.c Thu Apr 29 23:26:20 2004
@@ -513,7 +513,7 @@
{
struct usb_device *dev = interface_to_usbdev(intf);
struct uvd *uvd = NULL;
- int i, nas;
+ int ix, i, nas;
int actInterface=-1, inactInterface=-1, maxPS=0;
unsigned char video_ep = 0;
@@ -540,11 +540,12 @@
return -ENODEV;
}
/* Validate all alternate settings */
- for (i=0; i < nas; i++) {
+ for (ix=0; ix < nas; ix++) {
const struct usb_host_interface *interface;
const struct usb_endpoint_descriptor *endpoint;
- interface = &intf->altsetting[i];
+ interface = &intf->altsetting[ix];
+ i = interface->desc.bAlternateSetting;
if (interface->desc.bNumEndpoints != 1) {
err("Interface %d. has %u. endpoints!",
interface->desc.bInterfaceNumber,
diff -Nru a/drivers/usb/media/vicam.c b/drivers/usb/media/vicam.c
--- a/drivers/usb/media/vicam.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/media/vicam.c Thu Apr 29 23:26:20 2004
@@ -1303,7 +1303,7 @@
printk(KERN_INFO "ViCam based webcam connected\n");
- interface = &intf->altsetting[0];
+ interface = intf->cur_altsetting;
DBG(KERN_DEBUG "Interface %d. has %u. endpoints!\n",
interface->desc.bInterfaceNumber, (unsigned) (interface->desc.bNumEndpoints));
diff -Nru a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
--- a/drivers/usb/misc/Kconfig Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/misc/Kconfig Thu Apr 29 23:26:20 2004
@@ -133,6 +133,18 @@
To compile this driver as a module, choose M here: the
module will be called speedtch.
+config USB_PHIDGETSERVO
+ tristate "USB PhidgetServo support"
+ depends on USB
+ help
+ Say Y here if you want to connect an 1 or 4 Motor PhidgetServo
+ servo controller version 2.0 or 3.0.
+
+ Phidgets Inc. has a web page at .
+
+ To compile this driver as a module, choose M here: the
+ module will be called phidgetservo.
+
config USB_TEST
tristate "USB testing driver (DEVELOPMENT)"
depends on USB && USB_DEVICEFS && EXPERIMENTAL
diff -Nru a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
--- a/drivers/usb/misc/Makefile Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/misc/Makefile Thu Apr 29 23:26:20 2004
@@ -15,3 +15,4 @@
obj-$(CONFIG_USB_TEST) += usbtest.o
obj-$(CONFIG_USB_TIGL) += tiglusb.o
obj-$(CONFIG_USB_USS720) += uss720.o
+obj-$(CONFIG_USB_PHIDGETSERVO) += phidgetservo.o
diff -Nru a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
--- a/drivers/usb/misc/legousbtower.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/misc/legousbtower.c Thu Apr 29 23:26:20 2004
@@ -704,7 +704,7 @@
dev->interrupt_out_urb = NULL;
- iface_desc = &interface->altsetting[0];
+ iface_desc = interface->cur_altsetting;
/* set up the endpoint information */
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
diff -Nru a/drivers/usb/misc/phidgetservo.c b/drivers/usb/misc/phidgetservo.c
--- /dev/null Wed Dec 31 16:00:00 1969
+++ b/drivers/usb/misc/phidgetservo.c Thu Apr 29 23:26:20 2004
@@ -0,0 +1,327 @@
+/*
+ * USB PhidgetServo driver 1.0
+ *
+ * Copyright (C) 2004 Sean Young
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This is a driver for the USB PhidgetServo version 2.0 and 3.0 servo
+ * controllers available at: http://www.phidgets.com/
+ *
+ * Note that the driver takes input as: degrees.minutes
+ * -23 < degrees < 203
+ * 0 < minutes < 59
+ *
+ * CAUTION: Generally you should use 0 < degrees < 180 as anything else
+ * is probably beyond the range of your servo and may damage it.
+ */
+
+#include
+#ifdef CONFIG_USB_DEBUG
+#define DEBUG 1
+#endif
+#include
+#include
+#include
+#include
+#include
+#include
+
+#define DRIVER_AUTHOR "Sean Young "
+#define DRIVER_DESC "USB PhidgetServo Driver"
+
+#define VENDOR_ID_GLAB 0x06c2
+#define DEVICE_ID_4MOTOR_SERVO_30 0x0038
+#define DEVICE_ID_1MOTOR_SERVO_30 0x0039
+
+#define VENDOR_ID_WISEGROUP 0x0925
+#define DEVICE_ID_1MOTOR_SERVO_20 0x8101
+#define DEVICE_ID_4MOTOR_SERVO_20 0x8104
+
+static struct usb_device_id id_table[] = {
+ {USB_DEVICE(VENDOR_ID_GLAB, DEVICE_ID_4MOTOR_SERVO_30)},
+ {USB_DEVICE(VENDOR_ID_GLAB, DEVICE_ID_1MOTOR_SERVO_30)},
+ {USB_DEVICE(VENDOR_ID_WISEGROUP, DEVICE_ID_4MOTOR_SERVO_20)},
+ {USB_DEVICE(VENDOR_ID_WISEGROUP, DEVICE_ID_1MOTOR_SERVO_20)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct phidget_servo {
+ struct usb_device *udev;
+ int version;
+ int quad_servo;
+ int pulse[4];
+ int degrees[4];
+ int minutes[4];
+};
+
+static void
+change_position_v30(struct phidget_servo *servo, int servo_no, int degrees,
+ int minutes)
+{
+ int retval;
+ unsigned char *buffer;
+
+ buffer = kmalloc(6, GFP_KERNEL);
+ if (!buffer) {
+ dev_err(&servo->udev->dev, "%s - out of memory\n",
+ __FUNCTION__);
+ return;
+ }
+
+ /*
+ * pulse = 0 - 4095
+ * angle = 0 - 180 degrees
+ *
+ * pulse = angle * 10.6 + 243.8
+ */
+ servo->pulse[servo_no] = ((degrees*60 + minutes)*106 + 2438*60)/600;
+ servo->degrees[servo_no]= degrees;
+ servo->minutes[servo_no]= minutes;
+
+ /*
+ * The PhidgetServo v3.0 is controlled by sending 6 bytes,
+ * 4 * 12 bits for each servo.
+ *
+ * low = lower 8 bits pulse
+ * high = higher 4 bits pulse
+ *
+ * offset bits
+ * +---+-----------------+
+ * | 0 | low 0 |
+ * +---+--------+--------+
+ * | 1 | high 1 | high 0 |
+ * +---+--------+--------+
+ * | 2 | low 1 |
+ * +---+-----------------+
+ * | 3 | low 2 |
+ * +---+--------+--------+
+ * | 4 | high 3 | high 2 |
+ * +---+--------+--------+
+ * | 5 | low 3 |
+ * +---+-----------------+
+ */
+
+ buffer[0] = servo->pulse[0] & 0xff;
+ buffer[1] = (servo->pulse[0] >> 8 & 0x0f)
+ | (servo->pulse[1] >> 4 & 0xf0);
+ buffer[2] = servo->pulse[1] & 0xff;
+ buffer[3] = servo->pulse[2] & 0xff;
+ buffer[4] = (servo->pulse[2] >> 8 & 0x0f)
+ | (servo->pulse[3] >> 4 & 0xf0);
+ buffer[5] = servo->pulse[3] & 0xff;
+
+ dev_dbg(&servo->udev->dev,
+ "data: %02x %02x %02x %02x %02x %02x\n",
+ buffer[0], buffer[1], buffer[2],
+ buffer[3], buffer[4], buffer[5]);
+
+ retval = usb_control_msg(servo->udev,
+ usb_sndctrlpipe(servo->udev, 0),
+ 0x09, 0x21, 0x0200, 0x0000, buffer, 6, 2 * HZ);
+ if (retval != 6)
+ dev_err(&servo->udev->dev, "retval = %d\n", retval);
+ kfree(buffer);
+}
+
+static void
+change_position_v20(struct phidget_servo *servo, int servo_no, int degrees,
+ int minutes)
+{
+ int retval;
+ unsigned char *buffer;
+
+ buffer = kmalloc(2, GFP_KERNEL);
+ if (!buffer) {
+ dev_err(&servo->udev->dev, "%s - out of memory\n",
+ __FUNCTION__);
+ return;
+ }
+
+ /*
+ * angle = 0 - 180 degrees
+ * pulse = angle + 23
+ */
+ servo->pulse[servo_no]= degrees + 23;
+ servo->degrees[servo_no]= degrees;
+ servo->minutes[servo_no]= 0;
+
+ /*
+ * The PhidgetServo v2.0 is controlled by sending two bytes. The
+ * first byte is the servo number xor'ed with 2:
+ *
+ * servo 0 = 2
+ * servo 1 = 3
+ * servo 2 = 0
+ * servo 3 = 1
+ *
+ * The second byte is the position.
+ */
+
+ buffer[0] = servo_no ^ 2;
+ buffer[1] = servo->pulse[servo_no];
+
+ dev_dbg(&servo->udev->dev, "data: %02x %02x\n", buffer[0], buffer[1]);
+
+ retval = usb_control_msg(servo->udev,
+ usb_sndctrlpipe(servo->udev, 0),
+ 0x09, 0x21, 0x0200, 0x0000, buffer, 2, 2 * HZ);
+ if (retval != 2)
+ dev_err(&servo->udev->dev, "retval = %d\n", retval);
+ kfree(buffer);
+}
+
+#define show_set(value) \
+static ssize_t set_servo##value (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ int degrees, minutes; \
+ struct usb_interface *intf = to_usb_interface (dev); \
+ struct phidget_servo *servo = usb_get_intfdata (intf); \
+ \
+ minutes = 0; \
+ /* must at least convert degrees */ \
+ if (sscanf (buf, "%d.%d", °rees, &minutes) < 1) { \
+ return -EINVAL; \
+ } \
+ \
+ if (degrees < -23 || degrees > (180 + 23) || \
+ minutes < 0 || minutes > 59) { \
+ return -EINVAL; \
+ } \
+ \
+ if (servo->version >= 3) \
+ change_position_v30 (servo, value, degrees, minutes); \
+ else \
+ change_position_v20 (servo, value, degrees, minutes); \
+ \
+ return count; \
+} \
+ \
+static ssize_t show_servo##value (struct device *dev, char *buf) \
+{ \
+ struct usb_interface *intf = to_usb_interface (dev); \
+ struct phidget_servo *servo = usb_get_intfdata (intf); \
+ \
+ return sprintf (buf, "%d.%02d\n", servo->degrees[value], \
+ servo->minutes[value]); \
+} \
+static DEVICE_ATTR(servo##value, S_IWUGO | S_IRUGO, \
+ show_servo##value, set_servo##value);
+
+show_set(0);
+show_set(1);
+show_set(2);
+show_set(3);
+
+static int
+servo_probe(struct usb_interface *interface, const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(interface);
+ struct phidget_servo *dev = NULL;
+
+ dev = kmalloc(sizeof (struct phidget_servo), GFP_KERNEL);
+ if (dev == NULL) {
+ dev_err(&interface->dev, "%s - out of memory\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+ memset(dev, 0x00, sizeof (*dev));
+
+ dev->udev = usb_get_dev(udev);
+ switch (udev->descriptor.idVendor) {
+ case VENDOR_ID_WISEGROUP:
+ dev->version = 2;
+ break;
+ case VENDOR_ID_GLAB:
+ dev->version = 3;
+ break;
+ }
+ switch (udev->descriptor.idProduct) {
+ case DEVICE_ID_4MOTOR_SERVO_20:
+ case DEVICE_ID_4MOTOR_SERVO_30:
+ dev->quad_servo = 1;
+ break;
+ case DEVICE_ID_1MOTOR_SERVO_20:
+ case DEVICE_ID_1MOTOR_SERVO_30:
+ dev->quad_servo = 0;
+ break;
+ }
+
+ usb_set_intfdata(interface, dev);
+
+ device_create_file(&interface->dev, &dev_attr_servo0);
+ if (dev->quad_servo) {
+ device_create_file(&interface->dev, &dev_attr_servo1);
+ device_create_file(&interface->dev, &dev_attr_servo2);
+ device_create_file(&interface->dev, &dev_attr_servo3);
+ }
+
+ dev_info(&interface->dev, "USB %d-Motor PhidgetServo v%d.0 attached\n",
+ dev->quad_servo ? 4 : 1, dev->version);
+ if (dev->version == 2)
+ dev_info(&interface->dev,
+ "WARNING: v2.0 not tested! Please report if it works.\n");
+
+ return 0;
+}
+
+static void
+servo_disconnect(struct usb_interface *interface)
+{
+ struct phidget_servo *dev;
+
+ dev = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+
+ device_remove_file(&interface->dev, &dev_attr_servo0);
+ if (dev->quad_servo) {
+ device_remove_file(&interface->dev, &dev_attr_servo1);
+ device_remove_file(&interface->dev, &dev_attr_servo2);
+ device_remove_file(&interface->dev, &dev_attr_servo3);
+ }
+
+ usb_put_dev(dev->udev);
+
+ kfree(dev);
+
+ dev_info(&interface->dev, "USB %d-Motor PhidgetServo v%d.0 detached\n",
+ dev->quad_servo ? 4 : 1, dev->version);
+}
+
+static struct usb_driver servo_driver = {
+ .owner = THIS_MODULE,
+ .name = "phidgetservo",
+ .probe = servo_probe,
+ .disconnect = servo_disconnect,
+ .id_table = id_table
+};
+
+static int __init
+phidget_servo_init(void)
+{
+ int retval = 0;
+
+ retval = usb_register(&servo_driver);
+ if (retval)
+ err("usb_register failed. Error number %d", retval);
+
+ return retval;
+}
+
+static void __exit
+phidget_servo_exit(void)
+{
+ usb_deregister(&servo_driver);
+}
+
+module_init(phidget_servo_init);
+module_exit(phidget_servo_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff -Nru a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
--- a/drivers/usb/misc/usbtest.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/misc/usbtest.c Thu Apr 29 23:26:20 2004
@@ -802,6 +802,7 @@
switch (status) {
case -EINPROGRESS:
case -EBUSY:
+ case -EIDRM:
continue;
default:
dbg ("urb unlink --> %d", status);
@@ -1038,8 +1039,6 @@
if (!status)
status = usb_submit_urb (urb, SLAB_ATOMIC);
if (status) {
- if (status == -ECONNRESET || status == -ENOENT)
- status = 0;
urb->status = status;
complete ((struct completion *) urb->context);
}
@@ -1077,8 +1076,9 @@
wait_ms (jiffies % (2 * INTERRUPT_RATE));
retry:
retval = usb_unlink_urb (urb);
- if (retval == -EBUSY) {
+ if (retval == -EBUSY || retval == -EIDRM) {
/* we can't unlink urbs while they're completing.
+ * or if they've completed, and we haven't resubmitted.
* "normal" drivers would prevent resubmission, but
* since we're testing unlink paths, we can't.
*/
diff -Nru a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
--- a/drivers/usb/misc/uss720.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/misc/uss720.c Thu Apr 29 23:26:20 2004
@@ -553,7 +553,7 @@
i = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2);
printk(KERN_DEBUG "uss720: set inteface result %d\n", i);
- interface = &intf->altsetting[2];
+ interface = intf->cur_altsetting;
/*
* Allocate parport interface
diff -Nru a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
--- a/drivers/usb/net/usbnet.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/net/usbnet.c Thu Apr 29 23:26:20 2004
@@ -928,8 +928,8 @@
*/
static int generic_cdc_bind (struct usbnet *dev, struct usb_interface *intf)
{
- u8 *buf = intf->altsetting->extra;
- int len = intf->altsetting->extralen;
+ u8 *buf = intf->cur_altsetting->extra;
+ int len = intf->cur_altsetting->extralen;
struct usb_interface_descriptor *d;
struct cdc_state *info = (void *) &dev->data;
int status;
@@ -955,7 +955,7 @@
/* this assumes that if there's a non-RNDIS vendor variant
* of cdc-acm, it'll fail RNDIS requests cleanly.
*/
- rndis = (intf->altsetting->desc.bInterfaceProtocol == 0xff);
+ rndis = (intf->cur_altsetting->desc.bInterfaceProtocol == 0xff);
memset (info, 0, sizeof *info);
info->control = intf;
@@ -1025,7 +1025,7 @@
}
/* a data interface altsetting does the real i/o */
- d = &info->data->altsetting->desc;
+ d = &info->data->cur_altsetting->desc;
if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
dev_dbg (&intf->dev, "slave class %u\n",
d->bInterfaceClass);
diff -Nru a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
--- a/drivers/usb/serial/io_ti.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/serial/io_ti.c Thu Apr 29 23:26:20 2004
@@ -995,7 +995,7 @@
if (status)
return status;
- interface = &serial->serial->dev->config->interface[0]->altsetting->desc;
+ interface = &serial->serial->interface->cur_altsetting->desc;
if (!interface) {
dev_err (&serial->serial->dev->dev, "%s - no interface set, error!", __FUNCTION__);
return -ENODEV;
diff -Nru a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
--- a/drivers/usb/serial/keyspan.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/serial/keyspan.c Thu Apr 29 23:26:20 2004
@@ -133,9 +133,6 @@
/* Per device and per port private data */
struct keyspan_serial_private {
- /* number of active ports */
- atomic_t active_count;
-
const struct keyspan_device_details *device_details;
struct urb *instat_urb;
diff -Nru a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
--- a/drivers/usb/serial/kobil_sct.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/serial/kobil_sct.c Thu Apr 29 23:26:20 2004
@@ -183,7 +183,7 @@
pdev = serial->dev;
actconfig = pdev->actconfig;
interface = actconfig->interface[0];
- altsetting = interface->altsetting;
+ altsetting = interface->cur_altsetting;
endpoint = altsetting->endpoint;
for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
diff -Nru a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
--- a/drivers/usb/serial/safe_serial.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/serial/safe_serial.c Thu Apr 29 23:26:20 2004
@@ -395,7 +395,7 @@
static int safe_startup (struct usb_serial *serial)
{
- switch (serial->interface->altsetting->desc.bInterfaceProtocol) {
+ switch (serial->interface->cur_altsetting->desc.bInterfaceProtocol) {
case LINEO_SAFESERIAL_CRC:
break;
case LINEO_SAFESERIAL_CRC_PADDED:
diff -Nru a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
--- a/drivers/usb/serial/usb-serial.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/serial/usb-serial.c Thu Apr 29 23:26:20 2004
@@ -1037,7 +1037,7 @@
(dev->descriptor.idProduct == ATEN_PRODUCT_ID))) {
if (interface != dev->actconfig->interface[0]) {
/* check out the endpoints of the other interface*/
- iface_desc = &dev->actconfig->interface[0]->altsetting[0];
+ iface_desc = dev->actconfig->interface[0]->cur_altsetting;
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
if ((endpoint->bEndpointAddress & 0x80) &&
diff -Nru a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
--- a/drivers/usb/storage/scsiglue.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/storage/scsiglue.c Thu Apr 29 23:26:20 2004
@@ -159,14 +159,18 @@
return FAILED;
}
- /* Set state to ABORTING, set the ABORTING bit, and release the lock */
+ /* Set state to ABORTING and set the ABORTING bit, but only if
+ * a device reset isn't already in progress (to avoid interfering
+ * with the reset). To prevent races with auto-reset, we must
+ * stop any ongoing USB transfers while still holding the host
+ * lock. */
us->sm_state = US_STATE_ABORTING;
- set_bit(US_FLIDX_ABORTING, &us->flags);
+ if (!test_bit(US_FLIDX_RESETTING, &us->flags)) {
+ set_bit(US_FLIDX_ABORTING, &us->flags);
+ usb_stor_stop_transport(us);
+ }
scsi_unlock(host);
- /* Stop an ongoing USB transfer */
- usb_stor_stop_transport(us);
-
/* Wait for the aborted command to finish */
wait_for_completion(&us->notify);
@@ -254,18 +258,17 @@
}
/* Report a driver-initiated device reset to the SCSI layer.
- * Calling this for a SCSI-initiated reset is unnecessary but harmless. */
+ * Calling this for a SCSI-initiated reset is unnecessary but harmless.
+ * The caller must own the SCSI host lock. */
void usb_stor_report_device_reset(struct us_data *us)
{
int i;
- scsi_lock(us->host);
scsi_report_device_reset(us->host, 0, 0);
if (us->flags & US_FL_SCM_MULT_TARG) {
for (i = 1; i < us->host->max_id; ++i)
scsi_report_device_reset(us->host, 0, i);
}
- scsi_unlock(us->host);
}
/***********************************************************************
diff -Nru a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
--- a/drivers/usb/storage/transport.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/storage/transport.c Thu Apr 29 23:26:20 2004
@@ -137,7 +137,7 @@
int status;
/* don't submit URBs during abort/disconnect processing */
- if (us->flags & DONT_SUBMIT)
+ if (us->flags & ABORTING_OR_DISCONNECTING)
return -EIO;
/* set up data structures for the wakeup system */
@@ -172,7 +172,7 @@
set_bit(US_FLIDX_URB_ACTIVE, &us->flags);
/* did an abort/disconnect occur during the submission? */
- if (us->flags & DONT_SUBMIT) {
+ if (us->flags & ABORTING_OR_DISCONNECTING) {
/* cancel the URB, if it hasn't been cancelled already */
if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->flags)) {
@@ -440,7 +440,7 @@
int result;
/* don't submit s-g requests during abort/disconnect processing */
- if (us->flags & DONT_SUBMIT)
+ if (us->flags & ABORTING_OR_DISCONNECTING)
return USB_STOR_XFER_ERROR;
/* initialize the scatter-gather request block */
@@ -458,7 +458,7 @@
set_bit(US_FLIDX_SG_ACTIVE, &us->flags);
/* did an abort/disconnect occur during the submission? */
- if (us->flags & DONT_SUBMIT) {
+ if (us->flags & ABORTING_OR_DISCONNECTING) {
/* cancel the request, if it hasn't been cancelled already */
if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->flags)) {
@@ -712,14 +712,10 @@
/* abort processing: the bulk-only transport requires a reset
* following an abort */
- Handle_Abort:
+ Handle_Abort:
srb->result = DID_ABORT << 16;
- if (us->protocol == US_PR_BULK) {
-
- /* permit the reset transfer to take place */
- clear_bit(US_FLIDX_ABORTING, &us->flags);
+ if (us->protocol == US_PR_BULK)
us->transport_reset(us);
- }
}
/* Stop the current URB transfer */
@@ -912,6 +908,17 @@
USB_RECIP_INTERFACE,
0, us->ifnum, us->iobuf, 1, HZ);
+ /*
+ * Some devices (i.e. Iomega Zip100) need this -- apparently
+ * the bulk pipes get STALLed when the GetMaxLUN request is
+ * processed. This is, in theory, harmless to all other devices
+ * (regardless of if they stall or not).
+ */
+ if (result < 0) {
+ usb_stor_clear_halt(us, us->recv_bulk_pipe);
+ usb_stor_clear_halt(us, us->send_bulk_pipe);
+ }
+
US_DEBUGP("GetMaxLUN command result is %d, data is %d\n",
result, us->iobuf[0]);
@@ -1079,20 +1086,28 @@
{
int result;
int result2;
+ int rc = FAILED;
- /* Let the SCSI layer know we are doing a reset */
+ /* Let the SCSI layer know we are doing a reset, set the
+ * RESETTING bit, and clear the ABORTING bit so that the reset
+ * may proceed.
+ */
+ scsi_lock(us->host);
usb_stor_report_device_reset(us);
+ set_bit(US_FLIDX_RESETTING, &us->flags);
+ clear_bit(US_FLIDX_ABORTING, &us->flags);
+ scsi_unlock(us->host);
/* A 20-second timeout may seem rather long, but a LaCie
- * StudioDrive USB2 device takes 16+ seconds to get going
- * following a powerup or USB attach event. */
-
+ * StudioDrive USB2 device takes 16+ seconds to get going
+ * following a powerup or USB attach event.
+ */
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
request, requesttype, value, index, data, size,
20*HZ);
if (result < 0) {
US_DEBUGP("Soft reset failed: %d\n", result);
- return FAILED;
+ goto Done;
}
/* long wait for reset, so unlock to allow disconnects */
@@ -1102,12 +1117,9 @@
down(&us->dev_semaphore);
if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
US_DEBUGP("Reset interrupted by disconnect\n");
- return FAILED;
+ goto Done;
}
- /* permit the clear-halt transfers to take place */
- clear_bit(US_FLIDX_ABORTING, &us->flags);
-
US_DEBUGP("Soft reset: clearing bulk-in endpoint halt\n");
result = usb_stor_clear_halt(us, us->recv_bulk_pipe);
@@ -1117,10 +1129,14 @@
/* return a result code based on the result of the control message */
if (result < 0 || result2 < 0) {
US_DEBUGP("Soft reset failed\n");
- return FAILED;
+ goto Done;
}
US_DEBUGP("Soft reset done\n");
- return SUCCESS;
+ rc = SUCCESS;
+
+ Done:
+ clear_bit(US_FLIDX_RESETTING, &us->flags);
+ return rc;
}
/* This issues a CB[I] Reset to the device in question
diff -Nru a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
--- a/drivers/usb/storage/unusual_devs.h Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/storage/unusual_devs.h Thu Apr 29 23:26:20 2004
@@ -438,22 +438,6 @@
US_FL_SINGLE_LUN ),
#endif
-/* Following three Minolta cameras reported by Martin Pool
- * . Originally discovered by Kedar Petankar,
- * Matthew Geier, Mikael Lofj"ard, Marcel de Boer.
- */
-UNUSUAL_DEV( 0x0686, 0x4006, 0x0001, 0x0001,
- "Minolta",
- "DiMAGE 7",
- US_SC_SCSI, US_PR_DEVICE, NULL,
- 0 ),
-
-UNUSUAL_DEV( 0x0686, 0x400f, 0x0001, 0x0001,
- "Minolta",
- "DiMAGE 7Hi",
- US_SC_SCSI, US_PR_DEVICE, NULL,
- 0 ),
-
/* Submitted by Benny Sjostrand */
UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
"Minolta",
@@ -629,7 +613,7 @@
"Casio",
"QV DigitalCamera",
US_SC_DEVICE, US_PR_CB, NULL,
- US_FL_FIX_INQUIRY ),
+ US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
/* Later Casio cameras apparently tell the truth */
UNUSUAL_DEV( 0x07cf, 0x1001, 0x9010, 0x9999,
@@ -688,7 +672,7 @@
UNUSUAL_DEV( 0x0a16, 0x8888, 0x0100, 0x0100,
"IBM",
"IBM USB Memory Key",
- US_SC_SCSI, US_PR_BULK, NULL,
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* This Pentax still camera is not conformant
diff -Nru a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
--- a/drivers/usb/storage/usb.c Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/storage/usb.c Thu Apr 29 23:26:20 2004
@@ -84,8 +84,6 @@
#include
-#include
-#include
#include
#include
@@ -490,7 +488,7 @@
if (unusual_dev->useTransport != US_PR_DEVICE &&
us->protocol == idesc->bInterfaceProtocol)
msg += 2;
- if (msg >= 0)
+ if (msg >= 0 && !(unusual_dev->flags & US_FL_NEED_OVERRIDE))
printk(KERN_NOTICE USB_STORAGE "This device "
"(%04x,%04x,%04x S %02x P %02x)"
" has %s in unusual_devs.h\n"
diff -Nru a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
--- a/drivers/usb/storage/usb.h Thu Apr 29 23:26:20 2004
+++ b/drivers/usb/storage/usb.h Thu Apr 29 23:26:20 2004
@@ -69,6 +69,7 @@
/* Flag definitions: these entries are static */
#define US_FL_SINGLE_LUN 0x00000001 /* allow access to only LUN 0 */
#define US_FL_MODE_XLATE 0 /* [no longer used] */
+#define US_FL_NEED_OVERRIDE 0x00000004 /* unusual_devs entry is necessary */
#define US_FL_IGNORE_SER 0 /* [no longer used] */
#define US_FL_SCM_MULT_TARG 0x00000020 /* supports multiple targets */
#define US_FL_FIX_INQUIRY 0x00000040 /* INQUIRY response needs faking */
@@ -79,8 +80,9 @@
#define US_FLIDX_SG_ACTIVE 19 /* 0x00080000 current_sg is in use */
#define US_FLIDX_ABORTING 20 /* 0x00100000 abort is in progress */
#define US_FLIDX_DISCONNECTING 21 /* 0x00200000 disconnect in progress */
-#define DONT_SUBMIT ((1UL << US_FLIDX_ABORTING) | \
- (1UL << US_FLIDX_DISCONNECTING))
+#define ABORTING_OR_DISCONNECTING ((1UL << US_FLIDX_ABORTING) | \
+ (1UL << US_FLIDX_DISCONNECTING))
+#define US_FLIDX_RESETTING 22 /* 0x00400000 device reset in progress */
/* processing state machine states */
diff -Nru a/include/linux/usb.h b/include/linux/usb.h
--- a/include/linux/usb.h Thu Apr 29 23:26:20 2004
+++ b/include/linux/usb.h Thu Apr 29 23:26:20 2004
@@ -14,6 +14,7 @@
#include /* for mdelay() */
#include /* for in_interrupt() */
#include /* for struct list_head */
+#include /* for struct kref */
#include /* for struct device */
#include /* for struct file_operations */
#include /* for struct completion */
@@ -147,11 +148,42 @@
#define USB_MAXINTERFACES 32
/**
+ * struct usb_interface_cache - long-term representation of a device interface
+ * @num_altsetting: number of altsettings defined.
+ * @ref: reference counter.
+ * @altsetting: variable-length array of interface structures, one for
+ * each alternate setting that may be selected. Each one includes a
+ * set of endpoint configurations. They will be in no particular order.
+ *
+ * These structures persist for the lifetime of a usb_device, unlike
+ * struct usb_interface (which persists only as long as its configuration
+ * is installed). The altsetting arrays can be accessed through these
+ * structures at any time, permitting comparison of configurations and
+ * providing support for the /proc/bus/usb/devices pseudo-file.
+ */
+struct usb_interface_cache {
+ unsigned num_altsetting; /* number of alternate settings */
+ struct kref ref; /* reference counter */
+
+ /* variable-length array of alternate settings for this interface,
+ * stored in no particular order */
+ struct usb_host_interface altsetting[0];
+};
+#define ref_to_usb_interface_cache(r) \
+ container_of(r, struct usb_interface_cache, ref)
+#define altsetting_to_usb_interface_cache(a) \
+ container_of(a, struct usb_interface_cache, altsetting[0])
+
+/**
* struct usb_host_config - representation of a device's configuration
* @desc: the device's configuration descriptor.
- * @interface: array of usb_interface structures, one for each interface
- * in the configuration. The number of interfaces is stored in
- * desc.bNumInterfaces.
+ * @interface: array of pointers to usb_interface structures, one for each
+ * interface in the configuration. The number of interfaces is stored
+ * in desc.bNumInterfaces. These pointers are valid only while the
+ * the configuration is active.
+ * @intf_cache: array of pointers to usb_interface_cache structures, one
+ * for each interface in the configuration. These structures exist
+ * for the entire life of the device.
* @extra: pointer to buffer containing all extra descriptors associated
* with this configuration (those preceding the first interface
* descriptor).
@@ -185,6 +217,10 @@
* stored in no particular order */
struct usb_interface *interface[USB_MAXINTERFACES];
+ /* Interface information available even when this is not the
+ * active configuration */
+ struct usb_interface_cache *intf_cache[USB_MAXINTERFACES];
+
unsigned char *extra; /* Extra descriptors */
int extralen;
};
@@ -731,8 +767,8 @@
struct urb
{
/* private, usb core and host controller only fields in the urb */
+ struct kref kref; /* reference count of the URB */
spinlock_t lock; /* lock for the URB */
- atomic_t count; /* reference count of the URB */
void *hcpriv; /* private data for host controller */
struct list_head urb_list; /* list pointer to all active urbs */
int bandwidth; /* bandwidth for INT/ISO request */
diff -Nru a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h
--- a/include/linux/usbdevice_fs.h Thu Apr 29 23:26:20 2004
+++ b/include/linux/usbdevice_fs.h Thu Apr 29 23:26:20 2004
@@ -154,7 +154,6 @@
struct dev_state {
struct list_head list; /* state list */
- struct rw_semaphore devsem; /* protects modifications to dev (dev == NULL indicating disconnect) */
struct usb_device *dev;
struct file *file;
spinlock_t lock; /* protects the async urb lists */