From: "John W. Linville" Add capability for 3c59x driver to use memory-mapped PCI I/O resources. This may improve performance for those devices so equipped. This will be the default behaviour for IS_CYCLONE and IS_TORNADO devices. Additionally, it can be enabled/disabled individually for up to MAX_UNITS number of devices via the use_mmio module option or for all units via the global_use_mmio option. The use_mmio option overrides the global_use_mmio option for those devices specified. Signed-off-by: John W. Linville Signed-off-by: Andrew Morton --- drivers/net/3c59x.c | 29 ++++++++++++++++++++++++++--- 1 files changed, 26 insertions(+), 3 deletions(-) diff -puN drivers/net/3c59x.c~3c59x-enable-use-of-memory-mapped-pci-i-o drivers/net/3c59x.c --- 25/drivers/net/3c59x.c~3c59x-enable-use-of-memory-mapped-pci-i-o Mon Sep 12 15:31:29 2005 +++ 25-akpm/drivers/net/3c59x.c Mon Sep 12 15:31:29 2005 @@ -908,9 +908,11 @@ static int full_duplex[MAX_UNITS] = {[0 static int hw_checksums[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; static int flow_ctrl[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; static int enable_wol[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; +static int use_mmio[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; static int global_options = -1; static int global_full_duplex = -1; static int global_enable_wol = -1; +static int global_use_mmio = -1; /* #define dev_alloc_skb dev_alloc_skb_debug */ @@ -935,6 +937,8 @@ module_param(compaq_ioaddr, int, 0); module_param(compaq_irq, int, 0); module_param(compaq_device_id, int, 0); module_param(watchdog, int, 0); +module_param(global_use_mmio, int, 0); +module_param_array(use_mmio, int, NULL, 0); MODULE_PARM_DESC(debug, "3c59x debug level (0-6)"); MODULE_PARM_DESC(options, "3c59x: Bits 0-3: media type, bit 4: bus mastering, bit 9: full duplex"); MODULE_PARM_DESC(global_options, "3c59x: same as options, but applies to all NICs if options is unset"); @@ -950,6 +954,8 @@ MODULE_PARM_DESC(compaq_ioaddr, "3c59x P MODULE_PARM_DESC(compaq_irq, "3c59x PCI IRQ number (Compaq BIOS problem workaround)"); MODULE_PARM_DESC(compaq_device_id, "3c59x PCI device ID (Compaq BIOS problem workaround)"); MODULE_PARM_DESC(watchdog, "3c59x transmit timeout in milliseconds"); +MODULE_PARM_DESC(global_use_mmio, "3c59x: same as use_mmio, but applies to all NICs if options is unset"); +MODULE_PARM_DESC(use_mmio, "3c59x: use memory-mapped PCI I/O resource (0-1)"); #ifdef CONFIG_NET_POLL_CONTROLLER static void poll_vortex(struct net_device *dev) @@ -1109,15 +1115,32 @@ static int __init vortex_eisa_init (void static int __devinit vortex_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { - int rc; + int rc, unit, pci_bar; + struct vortex_chip_info *vci; + void __iomem *ioaddr; /* wake up and enable device */ rc = pci_enable_device (pdev); if (rc < 0) goto out; - rc = vortex_probe1 (&pdev->dev, pci_iomap(pdev, 0, 0), - pdev->irq, ent->driver_data, vortex_cards_found); + unit = vortex_cards_found; + + if (global_use_mmio < 0 && (unit >= MAX_UNITS || use_mmio[unit] < 0)) { + /* Determine the default if the user didn't override us */ + vci = &vortex_info_tbl[ent->driver_data]; + pci_bar = vci->drv_flags & (IS_CYCLONE | IS_TORNADO) ? 1 : 0; + } else if (unit < MAX_UNITS && use_mmio[unit] >= 0) + pci_bar = use_mmio[unit] ? 1 : 0; + else + pci_bar = global_use_mmio ? 1 : 0; + + ioaddr = pci_iomap(pdev, pci_bar, 0); + if (!ioaddr) /* If mapping fails, fall-back to BAR 0... */ + ioaddr = pci_iomap(pdev, 0, 0); + + rc = vortex_probe1(&pdev->dev, ioaddr, pdev->irq, + ent->driver_data, unit); if (rc < 0) { pci_disable_device (pdev); goto out; _