From: Kumar Gala Support for the ADIR board is no longer maintained and thus being removed Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton --- dev/null | 1487 -------------------------------------------- arch/ppc/Kconfig | 3 arch/ppc/platforms/Makefile | 1 arch/ppc/syslib/Makefile | 2 4 files changed, 1493 deletions(-) diff -L arch/ppc/configs/adir_defconfig -puN arch/ppc/configs/adir_defconfig~ppc32-remove-board-support-for-adir /dev/null --- devel/arch/ppc/configs/adir_defconfig +++ /dev/null 2003-09-15 06:40:47.000000000 -0700 @@ -1,805 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_EMBEDDED is not set -CONFIG_FUTEX=y -CONFIG_EPOLL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Platform support -# -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_POWER3 is not set -# CONFIG_8xx is not set - -# -# IBM 4xx options -# -# CONFIG_8260 is not set -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PPC_STD_MMU=y -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_APUS is not set -# CONFIG_WILLOW_2 is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_SPRUCE is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -CONFIG_ADIR=y -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_ALTIVEC is not set -# CONFIG_TAU is not set -# CONFIG_CPU_FREQ is not set - -# -# General setup -# -# CONFIG_HIGHMEM is not set -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_KCORE_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_KERNEL_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_NAMES is not set -# CONFIG_HOTPLUG is not set - -# -# Parallel port support -# -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=y -CONFIG_PARPORT_PC_CML1=y -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_PC_SUPERIO=y -# CONFIG_PARPORT_OTHER is not set -CONFIG_PARPORT_1284=y -# CONFIG_PPC601_SYNC_FIX is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="ip=on" - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -CONFIG_BLK_DEV_FD=y -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# ATA/IDE/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI support -# -CONFIG_SCSI=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_AM53C974 is not set -# CONFIG_SCSI_MEGARAID is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -# CONFIG_SCSI_NCR53C7xx is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -CONFIG_SCSI_NCR53C8XX=y -CONFIG_SCSI_SYM53C8XX=y -CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 -CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 -CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set -# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set -# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -# CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_NF_TARGET_LOG is not set -# CONFIG_IP_NF_TARGET_ULOG is not set -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -# CONFIG_IP_NF_COMPAT_IPFWADM is not set -# CONFIG_IPV6 is not set -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_DGRS is not set -CONFIG_EEPRO100=y -# CONFIG_EEPRO100_PIO is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices (depends on LLC=y) -# -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN_BOOL is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set - -# -# Input Device Drivers -# - -# -# Macintosh device drivers -# - -# -# Character devices -# -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# I2C Hardware Sensors Mainboard support -# - -# -# I2C Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_DEVFS_FS is not set -CONFIG_DEVPTS_FS=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -CONFIG_USB_DYNAMIC_MINORS=y - -# -# USB Host Controller Drivers -# -# CONFIG_USB_EHCI_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_UHCI_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -CONFIG_USB_STORAGE_FREECOM=y -# CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y -# CONFIG_USB_STORAGE_HP8200e is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Human Interface Devices (HID) -# -CONFIG_USB_HID=m - -# -# Input core support is needed for USB HID input layer or HIDBP support -# -CONFIG_USB_HIDDEV=y - -# -# USB HID Boot Protocol drivers -# - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_SCANNER is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network adaptors -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -# CONFIG_USB_SERIAL_GENERIC is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -CONFIG_USB_SERIAL_VISOR=m -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_SAFE is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OMNINET is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_TIGL is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_GADGET is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set - -# -# Library routines -# -# CONFIG_CRC32 is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_KALLSYMS is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff -puN arch/ppc/Kconfig~ppc32-remove-board-support-for-adir arch/ppc/Kconfig --- devel/arch/ppc/Kconfig~ppc32-remove-board-support-for-adir 2005-07-27 13:28:57.000000000 -0700 +++ devel-akpm/arch/ppc/Kconfig 2005-07-27 13:28:57.000000000 -0700 @@ -637,9 +637,6 @@ config SANDPOINT config RADSTONE_PPC7D bool "Radstone Technology PPC7D board" -config ADIR - bool "SBS-Adirondack" - config K2 bool "SBS-K2" diff -L arch/ppc/platforms/adir.h -puN arch/ppc/platforms/adir.h~ppc32-remove-board-support-for-adir /dev/null --- devel/arch/ppc/platforms/adir.h +++ /dev/null 2003-09-15 06:40:47.000000000 -0700 @@ -1,95 +0,0 @@ -/* - * arch/ppc/platforms/adir.h - * - * Definitions for SBS Adirondack board support - * - * By Michael Sokolov - */ - -#ifndef __PPC_PLATFORMS_ADIR_H -#define __PPC_PLATFORMS_ADIR_H - -/* - * SBS Adirondack definitions - */ - -/* PPC physical address space layout. We use the one set up by the firmware. */ -#define ADIR_PCI32_MEM_BASE 0x80000000 -#define ADIR_PCI32_MEM_SIZE 0x20000000 -#define ADIR_PCI64_MEM_BASE 0xA0000000 -#define ADIR_PCI64_MEM_SIZE 0x20000000 -#define ADIR_PCI32_IO_BASE 0xC0000000 -#define ADIR_PCI32_IO_SIZE 0x10000000 -#define ADIR_PCI64_IO_BASE 0xD0000000 -#define ADIR_PCI64_IO_SIZE 0x10000000 -#define ADIR_PCI64_PHB 0xFF400000 -#define ADIR_PCI32_PHB 0xFF500000 - -#define ADIR_PCI64_CONFIG_ADDR (ADIR_PCI64_PHB + 0x000f8000) -#define ADIR_PCI64_CONFIG_DATA (ADIR_PCI64_PHB + 0x000f8010) - -#define ADIR_PCI32_CONFIG_ADDR (ADIR_PCI32_PHB + 0x000f8000) -#define ADIR_PCI32_CONFIG_DATA (ADIR_PCI32_PHB + 0x000f8010) - -/* System memory as seen from PCI */ -#define ADIR_PCI_SYS_MEM_BASE 0x80000000 - -/* Static virtual mapping of PCI I/O */ -#define ADIR_PCI32_VIRT_IO_BASE 0xFE000000 -#define ADIR_PCI32_VIRT_IO_SIZE 0x01000000 -#define ADIR_PCI64_VIRT_IO_BASE 0xFF000000 -#define ADIR_PCI64_VIRT_IO_SIZE 0x01000000 - -/* Registers */ -#define ADIR_NVRAM_RTC_ADDR 0x74 -#define ADIR_NVRAM_RTC_DATA 0x75 - -#define ADIR_BOARD_ID_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF0) -#define ADIR_CPLD1REV_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF1) -#define ADIR_CPLD2REV_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF2) -#define ADIR_FLASHCTL_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF3) -#define ADIR_CPC710_STAT_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF4) -#define ADIR_CLOCK_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF5) -#define ADIR_GPIO_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF8) -#define ADIR_MISC_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF9) -#define ADIR_LED_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFFA) - -#define ADIR_CLOCK_REG_PD 0x10 -#define ADIR_CLOCK_REG_SPREAD 0x08 -#define ADIR_CLOCK_REG_SEL133 0x04 -#define ADIR_CLOCK_REG_SEL1 0x02 -#define ADIR_CLOCK_REG_SEL0 0x01 - -#define ADIR_PROCA_INT_MASK (ADIR_PCI32_VIRT_IO_BASE + 0x0EFFF0) -#define ADIR_PROCB_INT_MASK (ADIR_PCI32_VIRT_IO_BASE + 0x0EFFF2) -#define ADIR_PROCA_INT_STAT (ADIR_PCI32_VIRT_IO_BASE + 0x0EFFF4) -#define ADIR_PROCB_INT_STAT (ADIR_PCI32_VIRT_IO_BASE + 0x0EFFF6) - -/* Linux IRQ numbers */ -#define ADIR_IRQ_NONE -1 -#define ADIR_IRQ_SERIAL2 3 -#define ADIR_IRQ_SERIAL1 4 -#define ADIR_IRQ_FDC 6 -#define ADIR_IRQ_PARALLEL 7 -#define ADIR_IRQ_VIA_AUDIO 10 -#define ADIR_IRQ_VIA_USB 11 -#define ADIR_IRQ_IDE0 14 -#define ADIR_IRQ_IDE1 15 -#define ADIR_IRQ_PCI0_INTA 16 -#define ADIR_IRQ_PCI0_INTB 17 -#define ADIR_IRQ_PCI0_INTC 18 -#define ADIR_IRQ_PCI0_INTD 19 -#define ADIR_IRQ_PCI1_INTA 20 -#define ADIR_IRQ_PCI1_INTB 21 -#define ADIR_IRQ_PCI1_INTC 22 -#define ADIR_IRQ_PCI1_INTD 23 -#define ADIR_IRQ_MBSCSI 24 /* motherboard SCSI */ -#define ADIR_IRQ_MBETH1 25 /* motherboard Ethernet 1 */ -#define ADIR_IRQ_MBETH0 26 /* motherboard Ethernet 0 */ -#define ADIR_IRQ_CPC710_INT1 27 -#define ADIR_IRQ_CPC710_INT2 28 -#define ADIR_IRQ_VT82C686_NMI 29 -#define ADIR_IRQ_VT82C686_INTR 30 -#define ADIR_IRQ_INTERPROC 31 - -#endif /* __PPC_PLATFORMS_ADIR_H */ diff -L arch/ppc/platforms/adir_pci.c -puN arch/ppc/platforms/adir_pci.c~ppc32-remove-board-support-for-adir /dev/null --- devel/arch/ppc/platforms/adir_pci.c +++ /dev/null 2003-09-15 06:40:47.000000000 -0700 @@ -1,247 +0,0 @@ -/* - * arch/ppc/platforms/adir_pci.c - * - * PCI support for SBS Adirondack - * - * By Michael Sokolov - * based on the K2 version by Matt Porter - */ - -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include -#include "adir.h" - -#undef DEBUG -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif /* DEBUG */ - -static inline int __init -adir_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ -#define PCIIRQ(a,b,c,d) {ADIR_IRQ_##a,ADIR_IRQ_##b,ADIR_IRQ_##c,ADIR_IRQ_##d}, - struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); - /* - * The three PCI devices on the motherboard have dedicated lines to the - * CPLD interrupt controller, bypassing the standard PCI INTA-D and the - * PC interrupt controller. All other PCI devices (slots) have usual - * staggered INTA-D lines, resulting in 8 lines total (PCI0 INTA-D and - * PCI1 INTA-D). All 8 go to the CPLD interrupt controller. PCI0 INTA-D - * also go to the south bridge, so we have the option of taking them - * via the CPLD interrupt controller or via the south bridge 8259 - * 8258 thingy. PCI1 INTA-D can only be taken via the CPLD interrupt - * controller. We take all PCI interrupts via the CPLD interrupt - * controller as recommended by SBS. - * - * We also have some monkey business with the PCI devices within the - * VT82C686B south bridge itself. This chip actually has 7 functions on - * its IDSEL. Function 0 is the actual south bridge, function 1 is IDE, - * and function 4 is some special stuff. The other 4 functions are just - * regular PCI devices bundled in the chip. 2 and 3 are USB UHCIs and 5 - * and 6 are audio (not supported on the Adirondack). - * - * This is where the monkey business begins. PCI devices are supposed - * to signal normal PCI interrupts. But the 4 functions in question are - * located in the south bridge chip, which is designed with the - * assumption that it will be fielding PCI INTA-D interrupts rather - * than generating them. Here's what it does. Each of the functions in - * question routes its interrupt to one of the IRQs on the 8259 thingy. - * Which one? It looks at the Interrupt Line register in the PCI config - * space, even though the PCI spec says it's for BIOS/OS interaction - * only. - * - * How do we deal with this? We take these interrupts via 8259 IRQs as - * we have to. We return the desired IRQ numbers from this routine when - * called for the functions in question. The PCI scan code will then - * stick our return value into the Interrupt Line register in the PCI - * config space, and the interrupt will actually go there. We identify - * these functions within the south bridge IDSEL by their interrupt pin - * numbers, as the VT82C686B has 04 in the Interrupt Pin register for - * USB and 03 for audio. - */ - if (!hose->index) { - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - /* south bridge */ PCIIRQ(IDE0, NONE, VIA_AUDIO, VIA_USB) - /* Ethernet 0 */ PCIIRQ(MBETH0, MBETH0, MBETH0, MBETH0) - /* PCI0 slot 1 */ PCIIRQ(PCI0_INTB, PCI0_INTC, PCI0_INTD, PCI0_INTA) - /* PCI0 slot 2 */ PCIIRQ(PCI0_INTC, PCI0_INTD, PCI0_INTA, PCI0_INTB) - /* PCI0 slot 3 */ PCIIRQ(PCI0_INTD, PCI0_INTA, PCI0_INTB, PCI0_INTC) - }; - const long min_idsel = 3, max_idsel = 7, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; - } else { - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - /* Ethernet 1 */ PCIIRQ(MBETH1, MBETH1, MBETH1, MBETH1) - /* SCSI */ PCIIRQ(MBSCSI, MBSCSI, MBSCSI, MBSCSI) - /* PCI1 slot 1 */ PCIIRQ(PCI1_INTB, PCI1_INTC, PCI1_INTD, PCI1_INTA) - /* PCI1 slot 2 */ PCIIRQ(PCI1_INTC, PCI1_INTD, PCI1_INTA, PCI1_INTB) - /* PCI1 slot 3 */ PCIIRQ(PCI1_INTD, PCI1_INTA, PCI1_INTB, PCI1_INTC) - }; - const long min_idsel = 3, max_idsel = 7, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; - } -#undef PCIIRQ -} - -static void -adir_pcibios_fixup_resources(struct pci_dev *dev) -{ - int i; - - if ((dev->vendor == PCI_VENDOR_ID_IBM) && - (dev->device == PCI_DEVICE_ID_IBM_CPC710_PCI64)) - { - DBG("Fixup CPC710 resources\n"); - for (i=0; iresource[i].start = 0; - dev->resource[i].end = 0; - } - } -} - -/* - * CPC710 DD3 has an errata causing it to hang the system if a type 0 config - * cycle is attempted on its PCI32 interface with a device number > 21. - * CPC710's PCI bridges map device numbers 1 through 21 to AD11 through AD31. - * Per the PCI spec it MUST accept all other device numbers and do nothing, and - * software MUST scan all device numbers without assuming how IDSELs are - * mapped. However, as the CPC710 DD3's errata causes such correct scanning - * procedure to hang the system, we have no choice but to introduce this hack - * of knowingly avoiding device numbers > 21 on PCI0, - */ -static int -adir_exclude_device(u_char bus, u_char devfn) -{ - if ((bus == 0) && (PCI_SLOT(devfn) > 21)) - return PCIBIOS_DEVICE_NOT_FOUND; - else - return PCIBIOS_SUCCESSFUL; -} - -void adir_find_bridges(void) -{ - struct pci_controller *hose_a, *hose_b; - - /* Setup PCI32 hose */ - hose_a = pcibios_alloc_controller(); - if (!hose_a) - return; - - hose_a->first_busno = 0; - hose_a->last_busno = 0xff; - hose_a->pci_mem_offset = ADIR_PCI32_MEM_BASE; - hose_a->io_space.start = 0; - hose_a->io_space.end = ADIR_PCI32_VIRT_IO_SIZE - 1; - hose_a->mem_space.start = 0; - hose_a->mem_space.end = ADIR_PCI32_MEM_SIZE - 1; - hose_a->io_resource.start = 0; - hose_a->io_resource.end = ADIR_PCI32_VIRT_IO_SIZE - 1; - hose_a->io_resource.flags = IORESOURCE_IO; - hose_a->mem_resources[0].start = ADIR_PCI32_MEM_BASE; - hose_a->mem_resources[0].end = ADIR_PCI32_MEM_BASE + - ADIR_PCI32_MEM_SIZE - 1; - hose_a->mem_resources[0].flags = IORESOURCE_MEM; - hose_a->io_base_phys = ADIR_PCI32_IO_BASE; - hose_a->io_base_virt = (void *) ADIR_PCI32_VIRT_IO_BASE; - - ppc_md.pci_exclude_device = adir_exclude_device; - setup_indirect_pci(hose_a, ADIR_PCI32_CONFIG_ADDR, - ADIR_PCI32_CONFIG_DATA); - - /* Initialize PCI32 bus registers */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(0, 0), - CPC710_BUS_NUMBER, - hose_a->first_busno); - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, - hose_a->last_busno); - - hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno); - - /* Write out correct max subordinate bus number for hose A */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, - hose_a->last_busno); - - /* Setup PCI64 hose */ - hose_b = pcibios_alloc_controller(); - if (!hose_b) - return; - - hose_b->first_busno = hose_a->last_busno + 1; - hose_b->last_busno = 0xff; - hose_b->pci_mem_offset = ADIR_PCI64_MEM_BASE; - hose_b->io_space.start = 0; - hose_b->io_space.end = ADIR_PCI64_VIRT_IO_SIZE - 1; - hose_b->mem_space.start = 0; - hose_b->mem_space.end = ADIR_PCI64_MEM_SIZE - 1; - hose_b->io_resource.start = 0; - hose_b->io_resource.end = ADIR_PCI64_VIRT_IO_SIZE - 1; - hose_b->io_resource.flags = IORESOURCE_IO; - hose_b->mem_resources[0].start = ADIR_PCI64_MEM_BASE; - hose_b->mem_resources[0].end = ADIR_PCI64_MEM_BASE + - ADIR_PCI64_MEM_SIZE - 1; - hose_b->mem_resources[0].flags = IORESOURCE_MEM; - hose_b->io_base_phys = ADIR_PCI64_IO_BASE; - hose_b->io_base_virt = (void *) ADIR_PCI64_VIRT_IO_BASE; - - setup_indirect_pci(hose_b, ADIR_PCI64_CONFIG_ADDR, - ADIR_PCI64_CONFIG_DATA); - - /* Initialize PCI64 bus registers */ - early_write_config_byte(hose_b, - 0, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, - 0xff); - - early_write_config_byte(hose_b, - 0, - PCI_DEVFN(0, 0), - CPC710_BUS_NUMBER, - hose_b->first_busno); - - hose_b->last_busno = pciauto_bus_scan(hose_b, - hose_b->first_busno); - - /* Write out correct max subordinate bus number for hose B */ - early_write_config_byte(hose_b, - hose_b->first_busno, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, - hose_b->last_busno); - - ppc_md.pcibios_fixup = NULL; - ppc_md.pcibios_fixup_resources = adir_pcibios_fixup_resources; - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = adir_map_irq; -} diff -L arch/ppc/platforms/adir_pic.c -puN arch/ppc/platforms/adir_pic.c~ppc32-remove-board-support-for-adir /dev/null --- devel/arch/ppc/platforms/adir_pic.c +++ /dev/null 2003-09-15 06:40:47.000000000 -0700 @@ -1,130 +0,0 @@ -/* - * arch/ppc/platforms/adir_pic.c - * - * Interrupt controller support for SBS Adirondack - * - * By Michael Sokolov - * based on the K2 and SCM versions by Matt Porter - */ - -#include -#include -#include -#include -#include - -#include -#include -#include "adir.h" - -static void adir_onboard_pic_enable(unsigned int irq); -static void adir_onboard_pic_disable(unsigned int irq); - -__init static void -adir_onboard_pic_init(void) -{ - volatile u_short *maskreg = (volatile u_short *) ADIR_PROCA_INT_MASK; - - /* Disable all Adirondack onboard interrupts */ - out_be16(maskreg, 0xFFFF); -} - -static int -adir_onboard_pic_get_irq(void) -{ - volatile u_short *statreg = (volatile u_short *) ADIR_PROCA_INT_STAT; - int irq; - u_short int_status, int_test; - - int_status = in_be16(statreg); - for (irq = 0, int_test = 1; irq < 16; irq++, int_test <<= 1) { - if (int_status & int_test) - break; - } - - if (irq == 16) - return -1; - - return (irq+16); -} - -static void -adir_onboard_pic_enable(unsigned int irq) -{ - volatile u_short *maskreg = (volatile u_short *) ADIR_PROCA_INT_MASK; - - /* Change irq to Adirondack onboard native value */ - irq -= 16; - - /* Enable requested irq number */ - out_be16(maskreg, in_be16(maskreg) & ~(1 << irq)); -} - -static void -adir_onboard_pic_disable(unsigned int irq) -{ - volatile u_short *maskreg = (volatile u_short *) ADIR_PROCA_INT_MASK; - - /* Change irq to Adirondack onboard native value */ - irq -= 16; - - /* Disable requested irq number */ - out_be16(maskreg, in_be16(maskreg) | (1 << irq)); -} - -static struct hw_interrupt_type adir_onboard_pic = { - " ADIR PIC ", - NULL, - NULL, - adir_onboard_pic_enable, /* unmask */ - adir_onboard_pic_disable, /* mask */ - adir_onboard_pic_disable, /* mask and ack */ - NULL, - NULL -}; - -static struct irqaction noop_action = { - .handler = no_action, - .flags = SA_INTERRUPT, - .mask = CPU_MASK_NONE, - .name = "82c59 primary cascade", -}; - -/* - * Linux interrupt values are assigned as follows: - * - * 0-15 VT82C686 8259 interrupts - * 16-31 Adirondack CPLD interrupts - */ -__init void -adir_init_IRQ(void) -{ - int i; - - /* Initialize the cascaded 8259's on the VT82C686 */ - for (i=0; i<16; i++) - irq_desc[i].handler = &i8259_pic; - i8259_init(NULL); - - /* Initialize Adirondack CPLD PIC and enable 8259 interrupt cascade */ - for (i=16; i<32; i++) - irq_desc[i].handler = &adir_onboard_pic; - adir_onboard_pic_init(); - - /* Enable 8259 interrupt cascade */ - setup_irq(ADIR_IRQ_VT82C686_INTR, &noop_action); -} - -int -adir_get_irq(struct pt_regs *regs) -{ - int irq; - - if ((irq = adir_onboard_pic_get_irq()) < 0) - return irq; - - if (irq == ADIR_IRQ_VT82C686_INTR) - irq = i8259_irq(regs); - - return irq; -} diff -L arch/ppc/platforms/adir_setup.c -puN arch/ppc/platforms/adir_setup.c~ppc32-remove-board-support-for-adir /dev/null --- devel/arch/ppc/platforms/adir_setup.c +++ /dev/null 2003-09-15 06:40:47.000000000 -0700 @@ -1,210 +0,0 @@ -/* - * arch/ppc/platforms/adir_setup.c - * - * Board setup routines for SBS Adirondack - * - * By Michael Sokolov - * based on the K2 version by Matt Porter - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "adir.h" - -extern void adir_init_IRQ(void); -extern int adir_get_irq(struct pt_regs *); -extern void adir_find_bridges(void); -extern unsigned long loops_per_jiffy; - -static unsigned int cpu_750cx[16] = { - 5, 15, 14, 0, 4, 13, 0, 9, 6, 11, 8, 10, 16, 12, 7, 0 -}; - -static int -adir_get_bus_speed(void) -{ - if (!(*((u_char *) ADIR_CLOCK_REG) & ADIR_CLOCK_REG_SEL133)) - return 100000000; - else - return 133333333; -} - -static int -adir_get_cpu_speed(void) -{ - unsigned long hid1; - int cpu_speed; - - hid1 = mfspr(SPRN_HID1) >> 28; - - hid1 = cpu_750cx[hid1]; - - cpu_speed = adir_get_bus_speed()*hid1/2; - return cpu_speed; -} - -static void __init -adir_calibrate_decr(void) -{ - int freq, divisor = 4; - - /* determine processor bus speed */ - freq = adir_get_bus_speed(); - tb_ticks_per_jiffy = freq / HZ / divisor; - tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000); -} - -static int -adir_show_cpuinfo(struct seq_file *m) -{ - seq_printf(m, "vendor\t\t: SBS\n"); - seq_printf(m, "machine\t\t: Adirondack\n"); - seq_printf(m, "cpu speed\t: %dMhz\n", adir_get_cpu_speed()/1000000); - seq_printf(m, "bus speed\t: %dMhz\n", adir_get_bus_speed()/1000000); - seq_printf(m, "memory type\t: SDRAM\n"); - - return 0; -} - -extern char cmd_line[]; - -TODC_ALLOC(); - -static void __init -adir_setup_arch(void) -{ - unsigned int cpu; - - /* Setup TODC access */ - TODC_INIT(TODC_TYPE_MC146818, ADIR_NVRAM_RTC_ADDR, 0, - ADIR_NVRAM_RTC_DATA, 8); - - /* init to some ~sane value until calibrate_delay() runs */ - loops_per_jiffy = 50000000/HZ; - - /* Setup PCI host bridges */ - adir_find_bridges(); - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_SDA1; -#endif - - /* Identify the system */ - printk("System Identification: SBS Adirondack - PowerPC 750CXe @ %d Mhz\n", adir_get_cpu_speed()/1000000); - printk("SBS Adirondack port (C) 2001 SBS Technologies, Inc.\n"); - - /* Identify the CPU manufacturer */ - cpu = mfspr(SPRN_PVR); - printk("CPU manufacturer: IBM [rev=%04x]\n", (cpu & 0xffff)); -} - -static void -adir_restart(char *cmd) -{ - local_irq_disable(); - /* SRR0 has system reset vector, SRR1 has default MSR value */ - /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */ - __asm__ __volatile__ - ("lis 3,0xfff0\n\t" - "ori 3,3,0x0100\n\t" - "mtspr 26,3\n\t" - "li 3,0\n\t" - "mtspr 27,3\n\t" - "rfi\n\t"); - for(;;); -} - -static void -adir_power_off(void) -{ - for(;;); -} - -static void -adir_halt(void) -{ - adir_restart(NULL); -} - -static unsigned long __init -adir_find_end_of_memory(void) -{ - return boot_mem_size; -} - -static void __init -adir_map_io(void) -{ - io_block_mapping(ADIR_PCI32_VIRT_IO_BASE, ADIR_PCI32_IO_BASE, - ADIR_PCI32_VIRT_IO_SIZE, _PAGE_IO); - io_block_mapping(ADIR_PCI64_VIRT_IO_BASE, ADIR_PCI64_IO_BASE, - ADIR_PCI64_VIRT_IO_SIZE, _PAGE_IO); -} - -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - /* - * On the Adirondack we use bi_recs and pass the pointer to them in R3. - */ - parse_bootinfo((struct bi_record *) (r3 + KERNELBASE)); - - /* Remember, isa_io_base is virtual but isa_mem_base is physical! */ - isa_io_base = ADIR_PCI32_VIRT_IO_BASE; - isa_mem_base = ADIR_PCI32_MEM_BASE; - pci_dram_offset = ADIR_PCI_SYS_MEM_BASE; - - ppc_md.setup_arch = adir_setup_arch; - ppc_md.show_cpuinfo = adir_show_cpuinfo; - ppc_md.irq_canonicalize = NULL; - ppc_md.init_IRQ = adir_init_IRQ; - ppc_md.get_irq = adir_get_irq; - ppc_md.init = NULL; - - ppc_md.find_end_of_memory = adir_find_end_of_memory; - ppc_md.setup_io_mappings = adir_map_io; - - ppc_md.restart = adir_restart; - ppc_md.power_off = adir_power_off; - ppc_md.halt = adir_halt; - - ppc_md.time_init = todc_time_init; - ppc_md.set_rtc_time = todc_set_rtc_time; - ppc_md.get_rtc_time = todc_get_rtc_time; - ppc_md.nvram_read_val = todc_mc146818_read_val; - ppc_md.nvram_write_val = todc_mc146818_write_val; - ppc_md.calibrate_decr = adir_calibrate_decr; -} diff -puN arch/ppc/platforms/Makefile~ppc32-remove-board-support-for-adir arch/ppc/platforms/Makefile --- devel/arch/ppc/platforms/Makefile~ppc32-remove-board-support-for-adir 2005-07-27 13:28:57.000000000 -0700 +++ devel-akpm/arch/ppc/platforms/Makefile 2005-07-27 13:28:57.000000000 -0700 @@ -21,7 +21,6 @@ obj-$(CONFIG_CPU_FREQ_PMAC) += pmac_cpuf endif obj-$(CONFIG_PMAC_BACKLIGHT) += pmac_backlight.o obj-$(CONFIG_PREP_RESIDUAL) += residual.o -obj-$(CONFIG_ADIR) += adir_setup.o adir_pic.o adir_pci.o obj-$(CONFIG_PQ2ADS) += pq2ads.o obj-$(CONFIG_TQM8260) += tqm8260_setup.o obj-$(CONFIG_CPCI690) += cpci690.o diff -puN arch/ppc/syslib/Makefile~ppc32-remove-board-support-for-adir arch/ppc/syslib/Makefile --- devel/arch/ppc/syslib/Makefile~ppc32-remove-board-support-for-adir 2005-07-27 13:28:57.000000000 -0700 +++ devel-akpm/arch/ppc/syslib/Makefile 2005-07-27 13:29:16.000000000 -0700 @@ -43,8 +43,6 @@ obj-$(CONFIG_PPC_PMAC) += open_pic.o in obj-$(CONFIG_POWER4) += open_pic2.o obj-$(CONFIG_PPC_CHRP) += open_pic.o indirect_pci.o i8259.o obj-$(CONFIG_PPC_PREP) += open_pic.o indirect_pci.o i8259.o todc_time.o -obj-$(CONFIG_ADIR) += i8259.o indirect_pci.o pci_auto.o \ - todc_time.o obj-$(CONFIG_BAMBOO) += indirect_pci.o pci_auto.o todc_time.o obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o obj-$(CONFIG_EBONY) += indirect_pci.o pci_auto.o todc_time.o _