GIT 08cd84c81f27d5bd22ba958b7cae6d566c509280 master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git#ieee80211-wifi --- diff --git a/Documentation/networking/README.ipw2100 b/Documentation/networking/README.ipw2100 new file mode 100644 --- /dev/null +++ b/Documentation/networking/README.ipw2100 @@ -0,0 +1,246 @@ + +=========================== +Intel(R) PRO/Wireless 2100 Network Connection Driver for Linux +README.ipw2100 + +March 14, 2005 + +=========================== +Index +--------------------------- +0. Introduction +1. Release 1.1.0 Current Features +2. Command Line Parameters +3. Sysfs Helper Files +4. Radio Kill Switch +5. Dynamic Firmware +6. Power Management +7. Support +8. License + + +=========================== +0. Introduction +------------ ----- ----- ---- --- -- - + +This document provides a brief overview of the features supported by the +IPW2100 driver project. The main project website, where the latest +development version of the driver can be found, is: + + http://ipw2100.sourceforge.net + +There you can find the not only the latest releases, but also information about +potential fixes and patches, as well as links to the development mailing list +for the driver project. + + +=========================== +1. Release 1.1.0 Current Supported Features +--------------------------- +- Managed (BSS) and Ad-Hoc (IBSS) +- WEP (shared key and open) +- Wireless Tools support +- 802.1x (tested with XSupplicant 1.0.1) + +Enabled (but not supported) features: +- Monitor/RFMon mode +- WPA/WPA2 + +The distinction between officially supported and enabled is a reflection +on the amount of validation and interoperability testing that has been +performed on a given feature. + + +=========================== +2. Command Line Parameters +--------------------------- + +If the driver is built as a module, the following optional parameters are used +by entering them on the command line with the modprobe command using this +syntax: + + modprobe ipw2100 [