From: "Mikael Starvik" Include file for synchronous serial port driver. Signed-off-by: Mikael Starvik Signed-off-by: Andrew Morton --- include/asm-cris/sync_serial.h | 106 +++++++++++++++++++++++++++++++++++++++++ include/asm-cris/termbits.h | 2 2 files changed, 107 insertions(+), 1 deletion(-) diff -puN /dev/null include/asm-cris/sync_serial.h --- /dev/null 2003-09-15 06:40:47.000000000 -0700 +++ 25-akpm/include/asm-cris/sync_serial.h 2005-06-25 14:20:06.000000000 -0700 @@ -0,0 +1,106 @@ +/* + * ioctl defines for synchronous serial port driver + * + * Copyright (c) 2001-2003 Axis Communications AB + * + * Author: Mikael Starvik + * + */ + +#ifndef SYNC_SERIAL_H +#define SYNC_SERIAL_H + +#include + +#define SSP_SPEED _IOR('S', 0, unsigned int) +#define SSP_MODE _IOR('S', 1, unsigned int) +#define SSP_FRAME_SYNC _IOR('S', 2, unsigned int) +#define SSP_IPOLARITY _IOR('S', 3, unsigned int) +#define SSP_OPOLARITY _IOR('S', 4, unsigned int) +#define SSP_SPI _IOR('S', 5, unsigned int) +#define SSP_INBUFCHUNK _IOR('S', 6, unsigned int) + +/* Values for SSP_SPEED */ +#define SSP150 0 +#define SSP300 1 +#define SSP600 2 +#define SSP1200 3 +#define SSP2400 4 +#define SSP4800 5 +#define SSP9600 6 +#define SSP19200 7 +#define SSP28800 8 +#define SSP57600 9 +#define SSP115200 10 +#define SSP230400 11 +#define SSP460800 12 +#define SSP921600 13 +#define SSP3125000 14 +#define CODEC 15 + +#define FREQ_4MHz 0 +#define FREQ_2MHz 1 +#define FREQ_1MHz 2 +#define FREQ_512kHz 3 +#define FREQ_256kHz 4 +#define FREQ_128kHz 5 +#define FREQ_64kHz 6 +#define FREQ_32kHz 7 + +/* Used by application to set CODEC divider, word rate and frame rate */ +#define CODEC_VAL(freq, clk_per_sync, sync_per_frame) (CODEC | (freq << 8) | (clk_per_sync << 16) | (sync_per_frame << 28)) + +/* Used by driver to extract speed */ +#define GET_SPEED(x) (x & 0xff) +#define GET_FREQ(x) ((x & 0xff00) >> 8) +#define GET_WORD_RATE(x) (((x & 0x0fff0000) >> 16) - 1) +#define GET_FRAME_RATE(x) (((x & 0xf0000000) >> 28) - 1) + +/* Values for SSP_MODE */ +#define MASTER_OUTPUT 0 +#define SLAVE_OUTPUT 1 +#define MASTER_INPUT 2 +#define SLAVE_INPUT 3 +#define MASTER_BIDIR 4 +#define SLAVE_BIDIR 5 + +/* Values for SSP_FRAME_SYNC */ +#define NORMAL_SYNC 1 +#define EARLY_SYNC 2 + +#define BIT_SYNC 4 +#define WORD_SYNC 8 +#define EXTENDED_SYNC 0x10 + +#define SYNC_OFF 0x20 +#define SYNC_ON 0x40 +#define WORD_SIZE_8 0x80 +#define WORD_SIZE_12 0x100 +#define WORD_SIZE_16 0x200 +#define WORD_SIZE_24 0x400 +#define WORD_SIZE_32 0x800 +#define BIT_ORDER_LSB 0x1000 +#define BIT_ORDER_MSB 0x2000 +#define FLOW_CONTROL_ENABLE 0x4000 +#define FLOW_CONTROL_DISABLE 0x8000 +#define CLOCK_GATED 0x10000 +#define CLOCK_NOT_GATED 0x20000 + +/* Values for SSP_IPOLARITY and SSP_OPOLARITY */ +#define CLOCK_NORMAL 1 +#define CLOCK_INVERT 2 +#define CLOCK_INEGEDGE CLOCK_NORMAL +#define CLOCK_IPOSEDGE CLOCK_INVERT +#define FRAME_NORMAL 4 +#define FRAME_INVERT 8 +#define STATUS_NORMAL 0x10 +#define STATUS_INVERT 0x20 + +/* Values for SSP_SPI */ +#define SPI_MASTER 0 +#define SPI_SLAVE 1 + +/* Values for SSP_INBUFCHUNK */ +/* plain integer with the size of DMA chunks */ + +#endif diff -puN include/asm-cris/termbits.h~cris-update-14-17-synchronous-serial-port-driver include/asm-cris/termbits.h --- 25/include/asm-cris/termbits.h~cris-update-14-17-synchronous-serial-port-driver 2005-06-25 14:20:06.000000000 -0700 +++ 25-akpm/include/asm-cris/termbits.h 2005-06-25 14:20:06.000000000 -0700 @@ -152,7 +152,7 @@ struct termios { #define B921600 0010005 #define B1843200 0010006 #define B6250000 0010007 -/* etrax 200 supports this as well */ +/* ETRAX FS supports this as well */ #define B12500000 0010010 #define CIBAUD 002003600000 /* input baud rate (used in v32) */ /* The values for CIBAUD bits are the same as the values for CBAUD and CBAUDEX _