From: Patrick Boettcher Add big-endian register definitions for running on a PowerPC. (Thanks to Paavo Hartikainen for testing.) Signed-off-by: Patrick Boettcher Signed-off-by: Johannes Stezenbach Signed-off-by: Andrew Morton --- drivers/media/dvb/b2c2/flexcop-reg.h | 548 -------------------------- drivers/media/dvb/b2c2/flexcop_ibi_value_be.h | 451 +++++++++++++++++++++ drivers/media/dvb/b2c2/flexcop_ibi_value_le.h | 451 +++++++++++++++++++++ 3 files changed, 909 insertions(+), 541 deletions(-) diff -puN /dev/null drivers/media/dvb/b2c2/flexcop_ibi_value_be.h --- /dev/null Thu Apr 11 07:25:15 2002 +++ 25-akpm/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h Mon Jun 27 15:36:14 2005 @@ -0,0 +1,451 @@ +/* This file is part of linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * register descriptions + * + * see flexcop.c for copyright information. + */ + +/* This file is automatically generated, do not edit things here. */ +#ifndef __FLEXCOP_IBI_VALUE_INCLUDED__ +#define __FLEXCOP_IBI_VALUE_INCLUDED__ + +typedef union { + u32 raw; + + struct { + u32 dma_address0 :30; + u32 dma_0No_update : 1; + u32 dma_0start : 1; + } dma_0x0; + + struct { + u32 dma_addr_size :24; + u32 DMA_maxpackets : 8; + } dma_0x4_remap; + + struct { + u32 dma_addr_size :24; + u32 unused : 1; + u32 dma1timer : 7; + } dma_0x4_read; + + struct { + u32 dma_addr_size :24; + u32 dmatimer : 7; + u32 unused : 1; + } dma_0x4_write; + + struct { + u32 dma_cur_addr :30; + u32 unused : 2; + } dma_0x8; + + struct { + u32 dma_address1 :30; + u32 remap_enable : 1; + u32 dma_1start : 1; + } dma_0xc; + + struct { + u32 st_done : 1; + u32 no_base_addr_ack_error : 1; + u32 twoWS_port_reg : 2; + u32 total_bytes : 2; + u32 twoWS_rw : 1; + u32 working_start : 1; + u32 data1_reg : 8; + u32 baseaddr : 8; + u32 reserved1 : 1; + u32 chipaddr : 7; + } tw_sm_c_100; + + struct { + u32 unused : 6; + u32 force_stop : 1; + u32 exlicit_stops : 1; + u32 data4_reg : 8; + u32 data3_reg : 8; + u32 data2_reg : 8; + } tw_sm_c_104; + + struct { + u32 reserved2 :19; + u32 tlo1 : 5; + u32 reserved1 : 2; + u32 thi1 : 6; + } tw_sm_c_108; + + struct { + u32 reserved2 :19; + u32 tlo1 : 5; + u32 reserved1 : 2; + u32 thi1 : 6; + } tw_sm_c_10c; + + struct { + u32 reserved2 :19; + u32 tlo1 : 5; + u32 reserved1 : 2; + u32 thi1 : 6; + } tw_sm_c_110; + + struct { + u32 LNB_CTLPrescaler_sig : 2; + u32 LNB_CTLLowCount_sig :15; + u32 LNB_CTLHighCount_sig :15; + } lnb_switch_freq_200; + + struct { + u32 Rev_N_sig_reserved2 : 1; + u32 Rev_N_sig_caps : 1; + u32 Rev_N_sig_reserved1 : 2; + u32 Rev_N_sig_revision_hi : 4; + u32 reserved :20; + u32 Per_reset_sig : 1; + u32 LNB_L_H_sig : 1; + u32 ACPI3_sig : 1; + u32 ACPI1_sig : 1; + } misc_204; + + struct { + u32 unused : 9; + u32 Mailbox_from_V8_Enable_sig : 1; + u32 DMA2_Size_IRQ_Enable_sig : 1; + u32 DMA1_Size_IRQ_Enable_sig : 1; + u32 DMA2_Timer_Enable_sig : 1; + u32 DMA2_IRQ_Enable_sig : 1; + u32 DMA1_Timer_Enable_sig : 1; + u32 DMA1_IRQ_Enable_sig : 1; + u32 Rcv_Data_sig : 1; + u32 MAC_filter_Mode_sig : 1; + u32 Multi2_Enable_sig : 1; + u32 Per_CA_Enable_sig : 1; + u32 SMC_Enable_sig : 1; + u32 CA_Enable_sig : 1; + u32 WAN_CA_Enable_sig : 1; + u32 WAN_Enable_sig : 1; + u32 Mask_filter_sig : 1; + u32 Null_filter_sig : 1; + u32 ECM_filter_sig : 1; + u32 EMM_filter_sig : 1; + u32 PMT_filter_sig : 1; + u32 PCR_filter_sig : 1; + u32 Stream2_filter_sig : 1; + u32 Stream1_filter_sig : 1; + } ctrl_208; + + struct { + u32 reserved :21; + u32 Transport_Error : 1; + u32 LLC_SNAP_FLAG_set : 1; + u32 Continuity_error_flag : 1; + u32 Data_receiver_error : 1; + u32 Mailbox_from_V8_Status_sig : 1; + u32 DMA2_Size_IRQ_Status : 1; + u32 DMA1_Size_IRQ_Status : 1; + u32 DMA2_Timer_Status : 1; + u32 DMA2_IRQ_Status : 1; + u32 DMA1_Timer_Status : 1; + u32 DMA1_IRQ_Status : 1; + } irq_20c; + + struct { + u32 Special_controls :16; + u32 Block_reset_enable : 8; + u32 reset_blocks : 8; + } sw_reset_210; + + struct { + u32 unused2 :20; + u32 polarity_PS_ERR_sig : 1; + u32 polarity_PS_SYNC_sig : 1; + u32 polarity_PS_VALID_sig : 1; + u32 polarity_PS_CLK_sig : 1; + u32 unused1 : 3; + u32 s2p_sel_sig : 1; + u32 section_pkg_enable_sig : 1; + u32 halt_V8_sig : 1; + u32 v2WS_oe_sig : 1; + u32 vuart_oe_sig : 1; + } misc_214; + + struct { + u32 Mailbox_from_V8 :32; + } mbox_v8_to_host_218; + + struct { + u32 sysramaccess_busmuster : 1; + u32 sysramaccess_write : 1; + u32 unused : 7; + u32 sysramaccess_addr :15; + u32 sysramaccess_data : 8; + } mbox_host_to_v8_21c; + + struct { + u32 debug_fifo_problem : 1; + u32 debug_flag_write_status00 : 1; + u32 Stream2_trans : 1; + u32 Stream2_PID :13; + u32 debug_flag_pid_saved : 1; + u32 MAC_Multicast_filter : 1; + u32 Stream1_trans : 1; + u32 Stream1_PID :13; + } pid_filter_300; + + struct { + u32 reserved : 2; + u32 PMT_trans : 1; + u32 PMT_PID :13; + u32 debug_overrun2 : 1; + u32 debug_overrun3 : 1; + u32 PCR_trans : 1; + u32 PCR_PID :13; + } pid_filter_304; + + struct { + u32 reserved : 2; + u32 ECM_trans : 1; + u32 ECM_PID :13; + u32 EMM_filter_6 : 1; + u32 EMM_filter_4 : 1; + u32 EMM_trans : 1; + u32 EMM_PID :13; + } pid_filter_308; + + struct { + u32 unused2 : 3; + u32 Group_mask :13; + u32 unused1 : 2; + u32 Group_trans : 1; + u32 Group_PID :13; + } pid_filter_30c_ext_ind_0_7; + + struct { + u32 unused :15; + u32 net_master_read :17; + } pid_filter_30c_ext_ind_1; + + struct { + u32 unused :15; + u32 net_master_write :17; + } pid_filter_30c_ext_ind_2; + + struct { + u32 unused :15; + u32 next_net_master_write :17; + } pid_filter_30c_ext_ind_3; + + struct { + u32 reserved2 : 5; + u32 stack_read :10; + u32 reserved1 : 6; + u32 state_write :10; + u32 unused1 : 1; + } pid_filter_30c_ext_ind_4; + + struct { + u32 unused :22; + u32 stack_cnt :10; + } pid_filter_30c_ext_ind_5; + + struct { + u32 unused : 4; + u32 data_size_reg :12; + u32 write_status4 : 2; + u32 write_status1 : 2; + u32 pid_fsm_save_reg300 : 2; + u32 pid_fsm_save_reg4 : 2; + u32 pid_fsm_save_reg3 : 2; + u32 pid_fsm_save_reg2 : 2; + u32 pid_fsm_save_reg1 : 2; + u32 pid_fsm_save_reg0 : 2; + } pid_filter_30c_ext_ind_6; + + struct { + u32 unused :22; + u32 pass_alltables : 1; + u32 AB_select : 1; + u32 extra_index_reg : 3; + u32 index_reg : 5; + } index_reg_310; + + struct { + u32 reserved :17; + u32 PID_enable_bit : 1; + u32 PID_trans : 1; + u32 PID :13; + } pid_n_reg_314; + + struct { + u32 reserved : 6; + u32 HighAB_bit : 1; + u32 Enable_bit : 1; + u32 A6_byte : 8; + u32 A5_byte : 8; + u32 A4_byte : 8; + } mac_low_reg_318; + + struct { + u32 reserved : 8; + u32 A3_byte : 8; + u32 A2_byte : 8; + u32 A1_byte : 8; + } mac_high_reg_31c; + + struct { + u32 data_Tag_ID :16; + u32 reserved :16; + } data_tag_400; + + struct { + u32 Card_IDbyte3 : 8; + u32 Card_IDbyte4 : 8; + u32 Card_IDbyte5 : 8; + u32 Card_IDbyte6 : 8; + } card_id_408; + + struct { + u32 Card_IDbyte1 : 8; + u32 Card_IDbyte2 : 8; + } card_id_40c; + + struct { + u32 MAC6 : 8; + u32 MAC3 : 8; + u32 MAC2 : 8; + u32 MAC1 : 8; + } mac_address_418; + + struct { + u32 reserved :16; + u32 MAC8 : 8; + u32 MAC7 : 8; + } mac_address_41c; + + struct { + u32 reserved :21; + u32 txbuffempty : 1; + u32 ReceiveByteFrameError : 1; + u32 ReceiveDataReady : 1; + u32 transmitter_data_byte : 8; + } ci_600; + + struct { + u32 pi_component_reg : 3; + u32 pi_rw : 1; + u32 pi_ha :20; + u32 pi_d : 8; + } pi_604; + + struct { + u32 pi_busy_n : 1; + u32 pi_wait_n : 1; + u32 pi_timeout_status : 1; + u32 pi_CiMax_IRQ_n : 1; + u32 config_cclk : 1; + u32 config_cs_n : 1; + u32 config_wr_n : 1; + u32 config_Prog_n : 1; + u32 config_Init_stat : 1; + u32 config_Done_stat : 1; + u32 pcmcia_b_mod_pwr_n : 1; + u32 pcmcia_a_mod_pwr_n : 1; + u32 reserved : 3; + u32 Timer_addr : 5; + u32 unused : 1; + u32 timer_data : 7; + u32 Timer_Load_req : 1; + u32 Timer_Read_req : 1; + u32 oncecycle_read : 1; + u32 serialReset : 1; + } pi_608; + + struct { + u32 reserved : 6; + u32 rw_flag : 1; + u32 dvb_en : 1; + u32 key_array_row : 5; + u32 key_array_col : 3; + u32 key_code : 2; + u32 key_enable : 1; + u32 PID :13; + } dvb_reg_60c; + + struct { + u32 start_sram_ibi : 1; + u32 reserved2 : 1; + u32 ce_pin_reg : 1; + u32 oe_pin_reg : 1; + u32 reserved1 : 3; + u32 sc_xfer_bit : 1; + u32 sram_data : 8; + u32 sram_rw : 1; + u32 sram_addr :15; + } sram_ctrl_reg_700; + + struct { + u32 net_addr_write :16; + u32 net_addr_read :16; + } net_buf_reg_704; + + struct { + u32 cai_cnt : 4; + u32 reserved2 : 6; + u32 cai_write :11; + u32 reserved1 : 5; + u32 cai_read :11; + } cai_buf_reg_708; + + struct { + u32 cao_cnt : 4; + u32 reserved2 : 6; + u32 cap_write :11; + u32 reserved1 : 5; + u32 cao_read :11; + } cao_buf_reg_70c; + + struct { + u32 media_cnt : 4; + u32 reserved2 : 6; + u32 media_write :11; + u32 reserved1 : 5; + u32 media_read :11; + } media_buf_reg_710; + + struct { + u32 reserved :17; + u32 ctrl_maximumfill : 1; + u32 ctrl_sramdma : 1; + u32 ctrl_usb_wan : 1; + u32 cao_ovflow_error : 1; + u32 cai_ovflow_error : 1; + u32 media_ovflow_error : 1; + u32 net_ovflow_error : 1; + u32 MEDIA_Dest : 2; + u32 CAO_Dest : 2; + u32 CAI_Dest : 2; + u32 NET_Dest : 2; + } sram_dest_reg_714; + + struct { + u32 reserved3 :11; + u32 net_addr_write : 1; + u32 reserved2 : 3; + u32 net_addr_read : 1; + u32 reserved1 : 4; + u32 net_cnt :12; + } net_buf_reg_718; + + struct { + u32 reserved3 : 4; + u32 wan_pkt_frame : 4; + u32 reserved2 : 4; + u32 sram_memmap : 2; + u32 sram_chip : 2; + u32 wan_wait_state : 8; + u32 reserved1 : 6; + u32 wan_speed_sig : 2; + } wan_ctrl_reg_71c; +} flexcop_ibi_value; + +#endif diff -puN /dev/null drivers/media/dvb/b2c2/flexcop_ibi_value_le.h --- /dev/null Thu Apr 11 07:25:15 2002 +++ 25-akpm/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h Mon Jun 27 15:36:14 2005 @@ -0,0 +1,451 @@ +/* This file is part of linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * register descriptions + * + * see flexcop.c for copyright information. + */ + +/* This file is automatically generated, do not edit things here. */ +#ifndef __FLEXCOP_IBI_VALUE_INCLUDED__ +#define __FLEXCOP_IBI_VALUE_INCLUDED__ + +typedef union { + u32 raw; + + struct { + u32 dma_0start : 1; + u32 dma_0No_update : 1; + u32 dma_address0 :30; + } dma_0x0; + + struct { + u32 DMA_maxpackets : 8; + u32 dma_addr_size :24; + } dma_0x4_remap; + + struct { + u32 dma1timer : 7; + u32 unused : 1; + u32 dma_addr_size :24; + } dma_0x4_read; + + struct { + u32 unused : 1; + u32 dmatimer : 7; + u32 dma_addr_size :24; + } dma_0x4_write; + + struct { + u32 unused : 2; + u32 dma_cur_addr :30; + } dma_0x8; + + struct { + u32 dma_1start : 1; + u32 remap_enable : 1; + u32 dma_address1 :30; + } dma_0xc; + + struct { + u32 chipaddr : 7; + u32 reserved1 : 1; + u32 baseaddr : 8; + u32 data1_reg : 8; + u32 working_start : 1; + u32 twoWS_rw : 1; + u32 total_bytes : 2; + u32 twoWS_port_reg : 2; + u32 no_base_addr_ack_error : 1; + u32 st_done : 1; + } tw_sm_c_100; + + struct { + u32 data2_reg : 8; + u32 data3_reg : 8; + u32 data4_reg : 8; + u32 exlicit_stops : 1; + u32 force_stop : 1; + u32 unused : 6; + } tw_sm_c_104; + + struct { + u32 thi1 : 6; + u32 reserved1 : 2; + u32 tlo1 : 5; + u32 reserved2 :19; + } tw_sm_c_108; + + struct { + u32 thi1 : 6; + u32 reserved1 : 2; + u32 tlo1 : 5; + u32 reserved2 :19; + } tw_sm_c_10c; + + struct { + u32 thi1 : 6; + u32 reserved1 : 2; + u32 tlo1 : 5; + u32 reserved2 :19; + } tw_sm_c_110; + + struct { + u32 LNB_CTLHighCount_sig :15; + u32 LNB_CTLLowCount_sig :15; + u32 LNB_CTLPrescaler_sig : 2; + } lnb_switch_freq_200; + + struct { + u32 ACPI1_sig : 1; + u32 ACPI3_sig : 1; + u32 LNB_L_H_sig : 1; + u32 Per_reset_sig : 1; + u32 reserved :20; + u32 Rev_N_sig_revision_hi : 4; + u32 Rev_N_sig_reserved1 : 2; + u32 Rev_N_sig_caps : 1; + u32 Rev_N_sig_reserved2 : 1; + } misc_204; + + struct { + u32 Stream1_filter_sig : 1; + u32 Stream2_filter_sig : 1; + u32 PCR_filter_sig : 1; + u32 PMT_filter_sig : 1; + u32 EMM_filter_sig : 1; + u32 ECM_filter_sig : 1; + u32 Null_filter_sig : 1; + u32 Mask_filter_sig : 1; + u32 WAN_Enable_sig : 1; + u32 WAN_CA_Enable_sig : 1; + u32 CA_Enable_sig : 1; + u32 SMC_Enable_sig : 1; + u32 Per_CA_Enable_sig : 1; + u32 Multi2_Enable_sig : 1; + u32 MAC_filter_Mode_sig : 1; + u32 Rcv_Data_sig : 1; + u32 DMA1_IRQ_Enable_sig : 1; + u32 DMA1_Timer_Enable_sig : 1; + u32 DMA2_IRQ_Enable_sig : 1; + u32 DMA2_Timer_Enable_sig : 1; + u32 DMA1_Size_IRQ_Enable_sig : 1; + u32 DMA2_Size_IRQ_Enable_sig : 1; + u32 Mailbox_from_V8_Enable_sig : 1; + u32 unused : 9; + } ctrl_208; + + struct { + u32 DMA1_IRQ_Status : 1; + u32 DMA1_Timer_Status : 1; + u32 DMA2_IRQ_Status : 1; + u32 DMA2_Timer_Status : 1; + u32 DMA1_Size_IRQ_Status : 1; + u32 DMA2_Size_IRQ_Status : 1; + u32 Mailbox_from_V8_Status_sig : 1; + u32 Data_receiver_error : 1; + u32 Continuity_error_flag : 1; + u32 LLC_SNAP_FLAG_set : 1; + u32 Transport_Error : 1; + u32 reserved :21; + } irq_20c; + + struct { + u32 reset_blocks : 8; + u32 Block_reset_enable : 8; + u32 Special_controls :16; + } sw_reset_210; + + struct { + u32 vuart_oe_sig : 1; + u32 v2WS_oe_sig : 1; + u32 halt_V8_sig : 1; + u32 section_pkg_enable_sig : 1; + u32 s2p_sel_sig : 1; + u32 unused1 : 3; + u32 polarity_PS_CLK_sig : 1; + u32 polarity_PS_VALID_sig : 1; + u32 polarity_PS_SYNC_sig : 1; + u32 polarity_PS_ERR_sig : 1; + u32 unused2 :20; + } misc_214; + + struct { + u32 Mailbox_from_V8 :32; + } mbox_v8_to_host_218; + + struct { + u32 sysramaccess_data : 8; + u32 sysramaccess_addr :15; + u32 unused : 7; + u32 sysramaccess_write : 1; + u32 sysramaccess_busmuster : 1; + } mbox_host_to_v8_21c; + + struct { + u32 Stream1_PID :13; + u32 Stream1_trans : 1; + u32 MAC_Multicast_filter : 1; + u32 debug_flag_pid_saved : 1; + u32 Stream2_PID :13; + u32 Stream2_trans : 1; + u32 debug_flag_write_status00 : 1; + u32 debug_fifo_problem : 1; + } pid_filter_300; + + struct { + u32 PCR_PID :13; + u32 PCR_trans : 1; + u32 debug_overrun3 : 1; + u32 debug_overrun2 : 1; + u32 PMT_PID :13; + u32 PMT_trans : 1; + u32 reserved : 2; + } pid_filter_304; + + struct { + u32 EMM_PID :13; + u32 EMM_trans : 1; + u32 EMM_filter_4 : 1; + u32 EMM_filter_6 : 1; + u32 ECM_PID :13; + u32 ECM_trans : 1; + u32 reserved : 2; + } pid_filter_308; + + struct { + u32 Group_PID :13; + u32 Group_trans : 1; + u32 unused1 : 2; + u32 Group_mask :13; + u32 unused2 : 3; + } pid_filter_30c_ext_ind_0_7; + + struct { + u32 net_master_read :17; + u32 unused :15; + } pid_filter_30c_ext_ind_1; + + struct { + u32 net_master_write :17; + u32 unused :15; + } pid_filter_30c_ext_ind_2; + + struct { + u32 next_net_master_write :17; + u32 unused :15; + } pid_filter_30c_ext_ind_3; + + struct { + u32 unused1 : 1; + u32 state_write :10; + u32 reserved1 : 6; + u32 stack_read :10; + u32 reserved2 : 5; + } pid_filter_30c_ext_ind_4; + + struct { + u32 stack_cnt :10; + u32 unused :22; + } pid_filter_30c_ext_ind_5; + + struct { + u32 pid_fsm_save_reg0 : 2; + u32 pid_fsm_save_reg1 : 2; + u32 pid_fsm_save_reg2 : 2; + u32 pid_fsm_save_reg3 : 2; + u32 pid_fsm_save_reg4 : 2; + u32 pid_fsm_save_reg300 : 2; + u32 write_status1 : 2; + u32 write_status4 : 2; + u32 data_size_reg :12; + u32 unused : 4; + } pid_filter_30c_ext_ind_6; + + struct { + u32 index_reg : 5; + u32 extra_index_reg : 3; + u32 AB_select : 1; + u32 pass_alltables : 1; + u32 unused :22; + } index_reg_310; + + struct { + u32 PID :13; + u32 PID_trans : 1; + u32 PID_enable_bit : 1; + u32 reserved :17; + } pid_n_reg_314; + + struct { + u32 A4_byte : 8; + u32 A5_byte : 8; + u32 A6_byte : 8; + u32 Enable_bit : 1; + u32 HighAB_bit : 1; + u32 reserved : 6; + } mac_low_reg_318; + + struct { + u32 A1_byte : 8; + u32 A2_byte : 8; + u32 A3_byte : 8; + u32 reserved : 8; + } mac_high_reg_31c; + + struct { + u32 reserved :16; + u32 data_Tag_ID :16; + } data_tag_400; + + struct { + u32 Card_IDbyte6 : 8; + u32 Card_IDbyte5 : 8; + u32 Card_IDbyte4 : 8; + u32 Card_IDbyte3 : 8; + } card_id_408; + + struct { + u32 Card_IDbyte2 : 8; + u32 Card_IDbyte1 : 8; + } card_id_40c; + + struct { + u32 MAC1 : 8; + u32 MAC2 : 8; + u32 MAC3 : 8; + u32 MAC6 : 8; + } mac_address_418; + + struct { + u32 MAC7 : 8; + u32 MAC8 : 8; + u32 reserved :16; + } mac_address_41c; + + struct { + u32 transmitter_data_byte : 8; + u32 ReceiveDataReady : 1; + u32 ReceiveByteFrameError : 1; + u32 txbuffempty : 1; + u32 reserved :21; + } ci_600; + + struct { + u32 pi_d : 8; + u32 pi_ha :20; + u32 pi_rw : 1; + u32 pi_component_reg : 3; + } pi_604; + + struct { + u32 serialReset : 1; + u32 oncecycle_read : 1; + u32 Timer_Read_req : 1; + u32 Timer_Load_req : 1; + u32 timer_data : 7; + u32 unused : 1; + u32 Timer_addr : 5; + u32 reserved : 3; + u32 pcmcia_a_mod_pwr_n : 1; + u32 pcmcia_b_mod_pwr_n : 1; + u32 config_Done_stat : 1; + u32 config_Init_stat : 1; + u32 config_Prog_n : 1; + u32 config_wr_n : 1; + u32 config_cs_n : 1; + u32 config_cclk : 1; + u32 pi_CiMax_IRQ_n : 1; + u32 pi_timeout_status : 1; + u32 pi_wait_n : 1; + u32 pi_busy_n : 1; + } pi_608; + + struct { + u32 PID :13; + u32 key_enable : 1; + u32 key_code : 2; + u32 key_array_col : 3; + u32 key_array_row : 5; + u32 dvb_en : 1; + u32 rw_flag : 1; + u32 reserved : 6; + } dvb_reg_60c; + + struct { + u32 sram_addr :15; + u32 sram_rw : 1; + u32 sram_data : 8; + u32 sc_xfer_bit : 1; + u32 reserved1 : 3; + u32 oe_pin_reg : 1; + u32 ce_pin_reg : 1; + u32 reserved2 : 1; + u32 start_sram_ibi : 1; + } sram_ctrl_reg_700; + + struct { + u32 net_addr_read :16; + u32 net_addr_write :16; + } net_buf_reg_704; + + struct { + u32 cai_read :11; + u32 reserved1 : 5; + u32 cai_write :11; + u32 reserved2 : 6; + u32 cai_cnt : 4; + } cai_buf_reg_708; + + struct { + u32 cao_read :11; + u32 reserved1 : 5; + u32 cap_write :11; + u32 reserved2 : 6; + u32 cao_cnt : 4; + } cao_buf_reg_70c; + + struct { + u32 media_read :11; + u32 reserved1 : 5; + u32 media_write :11; + u32 reserved2 : 6; + u32 media_cnt : 4; + } media_buf_reg_710; + + struct { + u32 NET_Dest : 2; + u32 CAI_Dest : 2; + u32 CAO_Dest : 2; + u32 MEDIA_Dest : 2; + u32 net_ovflow_error : 1; + u32 media_ovflow_error : 1; + u32 cai_ovflow_error : 1; + u32 cao_ovflow_error : 1; + u32 ctrl_usb_wan : 1; + u32 ctrl_sramdma : 1; + u32 ctrl_maximumfill : 1; + u32 reserved :17; + } sram_dest_reg_714; + + struct { + u32 net_cnt :12; + u32 reserved1 : 4; + u32 net_addr_read : 1; + u32 reserved2 : 3; + u32 net_addr_write : 1; + u32 reserved3 :11; + } net_buf_reg_718; + + struct { + u32 wan_speed_sig : 2; + u32 reserved1 : 6; + u32 wan_wait_state : 8; + u32 sram_chip : 2; + u32 sram_memmap : 2; + u32 reserved2 : 4; + u32 wan_pkt_frame : 4; + u32 reserved3 : 4; + } wan_ctrl_reg_71c; +} flexcop_ibi_value; + +#endif diff -puN drivers/media/dvb/b2c2/flexcop-reg.h~dvb-flexcop-add-big-endian-register-definitions drivers/media/dvb/b2c2/flexcop-reg.h --- 25/drivers/media/dvb/b2c2/flexcop-reg.h~dvb-flexcop-add-big-endian-register-definitions Mon Jun 27 15:36:14 2005 +++ 25-akpm/drivers/media/dvb/b2c2/flexcop-reg.h Mon Jun 27 15:36:14 2005 @@ -36,555 +36,21 @@ typedef enum { extern const char *flexcop_device_names[]; /* FlexCop IBI Registers */ +#if defined(__LITTLE_ENDIAN) + #include "flexcop_ibi_value_le.h" +#elif defined(__BIG_ENDIAN) + #include "flexcop_ibi_value_be.h" +#else + #error no endian defined +#endif -/* flexcop_ibi_reg - a huge union representing the register structure */ -typedef union { - u32 raw; - -/* DMA 0x000 to 0x01c - * DMA1 0x000 to 0x00c - * DMA2 0x010 to 0x01c - */ - struct { - u32 dma_0start : 1; /* set: data will be delivered to dma1_address0 */ - u32 dma_0No_update : 1; /* set: dma1_cur_address will be updated, unset: no update */ - u32 dma_address0 :30; /* physical/virtual host memory address0 DMA */ - } dma_0x0; - - struct { - u32 DMA_maxpackets : 8; /* (remapped) PCI DMA1 Packet Count Interrupt. This variable - is able to be read and written while bit(1) of register - 0x00c (remap_enable) is set. This variable represents - the number of packets that will be transmitted to the PCI - host using PCI DMA1 before an interrupt to the PCI is - asserted. This functionality may be enabled using bit(20) - of register 0x208. N=0 disables the IRQ. */ - u32 dma_addr_size :24; /* size of memory buffer in DWORDs (bytesize / 4) for DMA */ - } dma_0x4_remap; - - struct { - u32 dma1timer : 7; /* reading PCI DMA1 timer ... when remap_enable is 0 */ - u32 unused : 1; - u32 dma_addr_size :24; - } dma_0x4_read; - - struct { - u32 unused : 1; - u32 dmatimer : 7; /* writing PCI DMA1 timer ... when remap_enable is 0 */ - u32 dma_addr_size :24; - } dma_0x4_write; - - struct { - u32 unused : 2; - u32 dma_cur_addr :30; /* current physical host memory address pointer for DMA */ - } dma_0x8; - - struct { - u32 dma_1start : 1; /* set: data will be delivered to dma_address1, when dma_address0 is full */ - u32 remap_enable : 1; /* remap enable for 0x0x4(7:0) */ - u32 dma_address1 :30; /* Physical/virtual address 1 on DMA */ - } dma_0xc; - -/* Two-wire Serial Master and Clock 0x100-0x110 */ - struct { -// u32 slave_transmitter : 1; /* ???*/ - u32 chipaddr : 7; /* two-line serial address of the target slave */ - u32 reserved1 : 1; - u32 baseaddr : 8; /* address of the location of the read/write operation */ - u32 data1_reg : 8; /* first byte in two-line serial read/write operation */ - u32 working_start : 1; /* when doing a write operation this indicator is 0 when ready - * set to 1 when doing a write operation */ - u32 twoWS_rw : 1; /* read/write indicator (1 = read, 0 write) */ - u32 total_bytes : 2; /* number of data bytes in each two-line serial transaction (0 = 1 byte, 11 = 4byte)*/ - u32 twoWS_port_reg : 2; /* port selection: 01 - Front End/Demod, 10 - EEPROM, 11 - Tuner */ - u32 no_base_addr_ack_error : 1; /* writing: write-req: frame is produced w/o baseaddr, read-req: read-cycles w/o - * preceding address assignment write frame - * ACK_ERROR = 1 when no ACK from slave in the last transaction */ - u32 st_done : 1; /* indicator for transaction is done */ - } tw_sm_c_100; - - struct { - u32 data2_reg : 8; /* 2nd data byte */ - u32 data3_reg : 8; /* 3rd data byte */ - u32 data4_reg : 8; /* 4th data byte */ - u32 exlicit_stops : 1; /* when set, transactions are produced w/o trailing STOP flag, then send isolated STOP flags */ - u32 force_stop : 1; /* isolated stop flag */ - u32 unused : 6; - } tw_sm_c_104; - -/* Clock. The register allows the FCIII to convert an incoming Master clock - * (MCLK) signal into a lower frequency clock through the use of a LowCounter - * (TLO) and a High- Counter (THI). The time counts for THI and TLO are - * measured in MCLK; each count represents 4 MCLK input clock cycles. - * - * The default output for port #1 is set for Front End Demod communication. (0x108) - * The default output for port #2 is set for EEPROM communication. (0x10c) - * The default output for port #3 is set for Tuner communication. (0x110) - */ - struct { - u32 thi1 : 6; /* Thi for port #1 (def: 100110b; 38) */ - u32 reserved1 : 2; - u32 tlo1 : 5; /* Tlo for port #1 (def: 11100b; 28) */ - u32 reserved2 :19; - } tw_sm_c_108; - - struct { - u32 thi1 : 6; /* Thi for port #2 (def: 111001b; 57) */ - u32 reserved1 : 2; - u32 tlo1 : 5; /* Tlo for port #2 (def: 11100b; 28) */ - u32 reserved2 :19; - } tw_sm_c_10c; - - struct { - u32 thi1 : 6; /* Thi for port #3 (def: 111001b; 57) */ - u32 reserved1 : 2; - u32 tlo1 : 5; /* Tlo for port #3 (def: 11100b; 28) */ - u32 reserved2 :19; - } tw_sm_c_110; - -/* LNB Switch Frequency 0x200 - * Clock that creates the LNB switch tone. The default is set to have a fixed - * low output (not oscillating) to the LNB_CTL line. - */ - struct { - u32 LNB_CTLHighCount_sig :15; /* It is the number of pre-scaled clock cycles that will be low. */ - u32 LNB_CTLLowCount_sig :15; /* For example, to obtain a 22KHz output given a 45 Mhz Master - Clock signal (MCLK), set PreScalar=01 and LowCounter value to 0x1ff. */ - u32 LNB_CTLPrescaler_sig : 2; /* pre-scaler divides MCLK: 00 (no division), 01 by 2, 10 by 4, 11 by 12 */ - } lnb_switch_freq_200; - -/* ACPI, Peripheral Reset, LNB Polarity - * ACPI power conservation mode, LNB polarity selection (low or high voltage), - * and peripheral reset. - */ - struct { - u32 ACPI1_sig : 1; /* turn of the power of tuner and LNB, not implemented in FCIII */ - u32 ACPI3_sig : 1; /* turn of power of the complete satelite receiver board (except FCIII) */ - u32 LNB_L_H_sig : 1; /* low or high voltage for LNB. (0 = low, 1 = high) */ - u32 Per_reset_sig : 1; /* misc. init reset (default: 1), to reset set to low and back to high */ - u32 reserved :20; - u32 Rev_N_sig_revision_hi : 4;/* 0xc in case of FCIII */ - u32 Rev_N_sig_reserved1 : 2; - u32 Rev_N_sig_caps : 1; /* if 1, FCIII has 32 PID- and MAC-filters and is capable of IP multicast */ - u32 Rev_N_sig_reserved2 : 1; - } misc_204; - -/* Control and Status 0x208 to 0x21c */ -/* Gross enable and disable control */ - struct { - u32 Stream1_filter_sig : 1; /* Stream1 PID filtering */ - u32 Stream2_filter_sig : 1; /* Stream2 PID filtering */ - u32 PCR_filter_sig : 1; /* PCR PID filter */ - u32 PMT_filter_sig : 1; /* PMT PID filter */ - - u32 EMM_filter_sig : 1; /* EMM PID filter */ - u32 ECM_filter_sig : 1; /* ECM PID filter */ - u32 Null_filter_sig : 1; /* Filters null packets, PID=0x1fff. */ - u32 Mask_filter_sig : 1; /* mask PID filter */ - - u32 WAN_Enable_sig : 1; /* WAN output line through V8 memory space is activated. */ - u32 WAN_CA_Enable_sig : 1; /* not in FCIII */ - u32 CA_Enable_sig : 1; /* not in FCIII */ - u32 SMC_Enable_sig : 1; /* CI stream data (CAI) goes directly to the smart card intf (opposed IBI 0x600 or SC-cmd buf). */ - - u32 Per_CA_Enable_sig : 1; /* not in FCIII */ - u32 Multi2_Enable_sig : 1; /* ? */ - u32 MAC_filter_Mode_sig : 1; /* (MAC_filter_enable) Globally enables MAC filters for Net PID filteres. */ - u32 Rcv_Data_sig : 1; /* PID filtering module enable. When this bit is a one, the PID filter will - examine and process packets according to all other (individual) PID - filtering controls. If it a zero, no packet processing of any kind will - take place. All data from the tuner will be thrown away. */ - - u32 DMA1_IRQ_Enable_sig : 1; /* When set, a DWORD counter is enabled on PCI DMA1 that asserts the PCI - * interrupt after the specified count for filling the buffer. */ - u32 DMA1_Timer_Enable_sig : 1; /* When set, a timer is enabled on PCI DMA1 that asserts the PCI interrupt - after a specified amount of time. */ - u32 DMA2_IRQ_Enable_sig : 1; /* same as DMA1_IRQ_Enable_sig but for DMA2 */ - u32 DMA2_Timer_Enable_sig : 1; /* same as DMA1_Timer_Enable_sig but for DMA2 */ - - u32 DMA1_Size_IRQ_Enable_sig : 1; /* When set, a packet count detector is enabled on PCI DMA1 that asserts the PCI interrupt. */ - u32 DMA2_Size_IRQ_Enable_sig : 1; /* When set, a packet count detector is enabled on PCI DMA2 that asserts the PCI interrupt. */ - u32 Mailbox_from_V8_Enable_sig: 1; /* When set, writes to the mailbox register produce an interrupt to the - PCI host to indicate that mailbox data is available. */ - - u32 unused : 9; - } ctrl_208; - -/* General status. When a PCI interrupt occurs, this register is read to - * discover the reason for the interrupt. - */ - struct { - u32 DMA1_IRQ_Status : 1; /* When set(1) the DMA1 counter had generated an IRQ. Read Only. */ - u32 DMA1_Timer_Status : 1; /* When set(1) the DMA1 timer had generated an IRQ. Read Only. */ - u32 DMA2_IRQ_Status : 1; /* When set(1) the DMA2 counter had generated an IRQ. Read Only. */ - u32 DMA2_Timer_Status : 1; /* When set(1) the DMA2 timer had generated an IRQ. Read Only. */ - u32 DMA1_Size_IRQ_Status : 1; /* (Read only). This register is read after an interrupt to */ - u32 DMA2_Size_IRQ_Status : 1; /* find out why we had an IRQ. Reading this register will clear this bit. Packet count*/ - u32 Mailbox_from_V8_Status_sig: 1; /* Same as above. Reading this register will clear this bit. */ - u32 Data_receiver_error : 1; /* 1 indicate an error in the receiver Front End (Tuner module) */ - u32 Continuity_error_flag : 1; /* 1 indicates a continuity error in the TS stream. */ - u32 LLC_SNAP_FLAG_set : 1; /* 1 indicates that the LCC_SNAP_FLAG was set. */ - u32 Transport_Error : 1; /* When set indicates that an unexpected packet was received. */ - u32 reserved :21; - } irq_20c; - - -/* Software reset register */ - struct { - u32 reset_blocks : 8; /* Enabled when Block_reset_enable = 0xB2 and 0x208 bits 15:8 = 0x00. - Each bit location represents a 0x100 block of registers. Writing - a one in a bit location resets that block of registers and the logic - that it controls. */ - u32 Block_reset_enable : 8; /* This variable is set to 0xB2 when the register is written. */ - u32 Special_controls :16; /* Asserts Reset_V8 => 0xC258; Turns on pci encryption => 0xC25A; - Turns off pci encryption => 0xC259 Note: pci_encryption default - at power-up is ON. */ - } sw_reset_210; - - struct { - u32 vuart_oe_sig : 1; /* When clear, the V8 processor has sole control of the serial UART - (RS-232 Smart Card interface). When set, the IBI interface - defined by register 0x600 controls the serial UART. */ - u32 v2WS_oe_sig : 1; /* When clear, the V8 processor has direct control of the Two-line - Serial Master EEPROM target. When set, the Two-line Serial Master - EEPROM target interface is controlled by IBI register 0x100. */ - u32 halt_V8_sig : 1; /* When set, contiguous wait states are applied to the V8-space - bus masters. Once this signal is cleared, normal V8-space - operations resume. */ - u32 section_pkg_enable_sig: 1; /* When set, this signal enables the front end translation circuitry - to process section packed transport streams. */ - u32 s2p_sel_sig : 1; /* Serial to parallel conversion. When set, polarized transport data - within the FlexCop3 front end circuitry is converted from a serial - stream into parallel data before downstream processing otherwise - interprets the data. */ - u32 unused1 : 3; - u32 polarity_PS_CLK_sig: 1; /* This signal is used to invert the input polarity of the tranport - stream CLOCK signal before any processing occurs on the transport - stream within FlexCop3. */ - u32 polarity_PS_VALID_sig: 1; /* This signal is used to invert the input polarity of the tranport - stream VALID signal before any processing occurs on the transport - stream within FlexCop3. */ - u32 polarity_PS_SYNC_sig: 1; /* This signal is used to invert the input polarity of the tranport - stream SYNC signal before any processing occurs on the transport - stream within FlexCop3. */ - u32 polarity_PS_ERR_sig: 1; /* This signal is used to invert the input polarity of the tranport - stream ERROR signal before any processing occurs on the transport - stream within FlexCop3. */ - u32 unused2 :20; - } misc_214; - -/* Mailbox from V8 to host */ - struct { - u32 Mailbox_from_V8 :32; /* When this register is written by either the V8 processor or by an - end host, an interrupt is generated to the PCI host to indicate - that mailbox data is available. Reading register 20c will clear - the IRQ. */ - } mbox_v8_to_host_218; - -/* Mailbox from host to v8 Mailbox_to_V8 - * Mailbox_to_V8 mailbox storage register - * used to send messages from PCI to V8. Writing to this register will send an - * IRQ to the V8. Then it can read the data from here. Reading this register - * will clear the IRQ. If the V8 is halted and bit 31 of this register is set, - * then this register is used instead as a direct interface to access the - * V8space memory. - */ - struct { - u32 sysramaccess_data : 8; /* Data byte written or read from the specified address in V8 SysRAM. */ - u32 sysramaccess_addr :15; /* 15 bit address used to access V8 Sys-RAM. */ - u32 unused : 7; - u32 sysramaccess_write: 1; /* Write flag used to latch data into the V8 SysRAM. */ - u32 sysramaccess_busmuster: 1; /* Setting this bit when the V8 is halted at 0x214 Bit(2) allows - this IBI register interface to directly drive the V8-space memory. */ - } mbox_host_to_v8_21c; - - -/* PIDs, Translation Bit, SMC Filter Select 0x300 to 0x31c */ - struct { - u32 Stream1_PID :13; /* Primary use is receiving Net data, so these 13 bits normally - hold the PID value for the desired network stream. */ - u32 Stream1_trans : 1; /* When set, Net translation will take place for Net data ferried in TS packets. */ - u32 MAC_Multicast_filter : 1; /* When clear, multicast MAC filtering is not allowed for Stream1 and PID_n filters. */ - u32 debug_flag_pid_saved : 1; - u32 Stream2_PID :13; /* 13 bits for Stream 2 PID filter value. General use. */ - u32 Stream2_trans : 1; /* When set Tables/CAI translation will take place for the data ferried in - Stream2_PID TS packets. */ - u32 debug_flag_write_status00 : 1; - u32 debug_fifo_problem : 1; - } pid_filter_300; - - struct { - u32 PCR_PID :13; /* PCR stream PID filter value. Primary use is Program Clock Reference stream filtering. */ - u32 PCR_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ - u32 debug_overrun3 : 1; - u32 debug_overrun2 : 1; - u32 PMT_PID :13; /* stream PID filter value. Primary use is Program Management Table segment filtering. */ - u32 PMT_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ - u32 reserved : 2; - } pid_filter_304; - - struct { - u32 EMM_PID :13; /* EMM PID filter value. Primary use is Entitlement Management Messaging for - conditional access-related data. */ - u32 EMM_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ - u32 EMM_filter_4 : 1; /* When set will pass only EMM data possessing the same ID code as the - first four bytes (32 bits) of the end-user s 6-byte Smart Card ID number Select */ - u32 EMM_filter_6 : 1; /* When set will pass only EMM data possessing the same 6-byte code as the end-users - complete 6-byte Smart Card ID number. */ - u32 ECM_PID :13; /* ECM PID filter value. Primary use is Entitlement Control Messaging for conditional - access-related data. */ - u32 ECM_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ - u32 reserved : 2; - } pid_filter_308; - - struct { - u32 Group_PID :13; /* PID value for group filtering. */ - u32 Group_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ - u32 unused1 : 2; - u32 Group_mask :13; /* Mask value used in logical "and" equation that defines group filtering */ - u32 unused2 : 3; - } pid_filter_30c_ext_ind_0_7; - - struct { - u32 net_master_read :17; - u32 unused :15; - } pid_filter_30c_ext_ind_1; - - struct { - u32 net_master_write :17; - u32 unused :15; - } pid_filter_30c_ext_ind_2; - - struct { - u32 next_net_master_write :17; - u32 unused :15; - } pid_filter_30c_ext_ind_3; - - struct { - u32 unused1 : 1; - u32 state_write :10; - u32 reserved1 : 6; /* default: 000100 */ - u32 stack_read :10; - u32 reserved2 : 5; /* default: 00100 */ - } pid_filter_30c_ext_ind_4; - - struct { - u32 stack_cnt :10; - u32 unused :22; - } pid_filter_30c_ext_ind_5; - - struct { - u32 pid_fsm_save_reg0 : 2; - u32 pid_fsm_save_reg1 : 2; - u32 pid_fsm_save_reg2 : 2; - u32 pid_fsm_save_reg3 : 2; - u32 pid_fsm_save_reg4 : 2; - u32 pid_fsm_save_reg300 : 2; - u32 write_status1 : 2; - u32 write_status4 : 2; - u32 data_size_reg :12; - u32 unused : 4; - } pid_filter_30c_ext_ind_6; - - struct { - u32 index_reg : 5; /* (Index pointer) Points at an internal PIDn register. A binary code - representing one of 32 internal PIDn registers as well as its - corresponding internal MAC_lown register. */ - u32 extra_index_reg : 3; /* This vector is used to select between sets of debug signals routed to register 0x30c. */ - u32 AB_select : 1; /* Used in conjunction with 0x31c. read/write to the MAC_highA or MAC_highB register - 0=MAC_highB register, 1=MAC_highA */ - u32 pass_alltables : 1; /* 1=Net packets are not filtered against the Network Table ID found in register 0x400. - All types of networks (DVB, ATSC, ISDB) are passed. */ - u32 unused :22; - } index_reg_310; - - struct { - u32 PID :13; /* PID value */ - u32 PID_trans : 1; /* translation will take place for packets filtered */ - u32 PID_enable_bit : 1; /* When set this PID filter is enabled */ - u32 reserved :17; - } pid_n_reg_314; - - struct { - u32 A4_byte : 8; - u32 A5_byte : 8; - u32 A6_byte : 8; - u32 Enable_bit : 1; /* enabled (1) or disabled (1) */ - u32 HighAB_bit : 1; /* use MAC_highA (1) or MAC_highB (0) as MSB */ - u32 reserved : 6; - } mac_low_reg_318; - - struct { - u32 A1_byte : 8; - u32 A2_byte : 8; - u32 A3_byte : 8; - u32 reserved : 8; - } mac_high_reg_31c; - -/* Table, SMCID,MACDestination Filters 0x400 to 0x41c */ - struct { - u32 reserved :16; #define fc_data_Tag_ID_DVB 0x3e #define fc_data_Tag_ID_ATSC 0x3f #define fc_data_Tag_ID_IDSB 0x8b - u32 data_Tag_ID :16; - } data_tag_400; - - struct { - u32 Card_IDbyte6 : 8; - u32 Card_IDbyte5 : 8; - u32 Card_IDbyte4 : 8; - u32 Card_IDbyte3 : 8; - } card_id_408; - struct { - u32 Card_IDbyte2 : 8; - u32 Card_IDbyte1 : 8; - } card_id_40c; - - /* holding the unique mac address of the receiver which houses the FlexCopIII */ - struct { - u32 MAC1 : 8; - u32 MAC2 : 8; - u32 MAC3 : 8; - u32 MAC6 : 8; - } mac_address_418; - - struct { - u32 MAC7 : 8; - u32 MAC8 : 8; - u32 reserved : 16; - } mac_address_41c; - - struct { - u32 transmitter_data_byte : 8; - u32 ReceiveDataReady : 1; - u32 ReceiveByteFrameError: 1; - u32 txbuffempty : 1; - u32 reserved :21; - } ci_600; - - struct { - u32 pi_d : 8; - u32 pi_ha :20; - u32 pi_rw : 1; - u32 pi_component_reg : 3; - } pi_604; - - struct { - u32 serialReset : 1; - u32 oncecycle_read : 1; - u32 Timer_Read_req : 1; - u32 Timer_Load_req : 1; - u32 timer_data : 7; - u32 unused : 1; /* ??? not mentioned in data book */ - u32 Timer_addr : 5; - u32 reserved : 3; - u32 pcmcia_a_mod_pwr_n : 1; - u32 pcmcia_b_mod_pwr_n : 1; - u32 config_Done_stat : 1; - u32 config_Init_stat : 1; - u32 config_Prog_n : 1; - u32 config_wr_n : 1; - u32 config_cs_n : 1; - u32 config_cclk : 1; - u32 pi_CiMax_IRQ_n : 1; - u32 pi_timeout_status : 1; - u32 pi_wait_n : 1; - u32 pi_busy_n : 1; - } pi_608; - - struct { - u32 PID :13; - u32 key_enable : 1; #define fc_key_code_default 0x1 #define fc_key_code_even 0x2 #define fc_key_code_odd 0x3 - u32 key_code : 2; - u32 key_array_col : 3; - u32 key_array_row : 5; - u32 dvb_en : 1; /* 0=TS bypasses the Descrambler */ - u32 rw_flag : 1; - u32 reserved : 6; - } dvb_reg_60c; - -/* SRAM and Output Destination 0x700 to 0x714 */ - struct { - u32 sram_addr :15; - u32 sram_rw : 1; /* 0=write, 1=read */ - u32 sram_data : 8; - u32 sc_xfer_bit : 1; - u32 reserved1 : 3; - u32 oe_pin_reg : 1; - u32 ce_pin_reg : 1; - u32 reserved2 : 1; - u32 start_sram_ibi : 1; - } sram_ctrl_reg_700; - - struct { - u32 net_addr_read :16; - u32 net_addr_write :16; - } net_buf_reg_704; - - struct { - u32 cai_read :11; - u32 reserved1 : 5; - u32 cai_write :11; - u32 reserved2 : 6; - u32 cai_cnt : 4; - } cai_buf_reg_708; - - struct { - u32 cao_read :11; - u32 reserved1 : 5; - u32 cap_write :11; - u32 reserved2 : 6; - u32 cao_cnt : 4; - } cao_buf_reg_70c; - - struct { - u32 media_read :11; - u32 reserved1 : 5; - u32 media_write :11; - u32 reserved2 : 6; - u32 media_cnt : 4; - } media_buf_reg_710; - - struct { - u32 NET_Dest : 2; - u32 CAI_Dest : 2; - u32 CAO_Dest : 2; - u32 MEDIA_Dest : 2; - u32 net_ovflow_error : 1; - u32 media_ovflow_error : 1; - u32 cai_ovflow_error : 1; - u32 cao_ovflow_error : 1; - u32 ctrl_usb_wan : 1; - u32 ctrl_sramdma : 1; - u32 ctrl_maximumfill : 1; - u32 reserved :17; - } sram_dest_reg_714; - - struct { - u32 net_cnt :12; - u32 reserved1 : 4; - u32 net_addr_read : 1; - u32 reserved2 : 3; - u32 net_addr_write : 1; - u32 reserved3 :11; - } net_buf_reg_718; - - struct { - u32 wan_speed_sig : 2; - u32 reserved1 : 6; - u32 wan_wait_state : 8; - u32 sram_chip : 2; - u32 sram_memmap : 2; - u32 reserved2 : 4; - u32 wan_pkt_frame : 4; - u32 reserved3 : 4; - } wan_ctrl_reg_71c; -} flexcop_ibi_value; extern flexcop_ibi_value ibi_zero; _