From: Vitaly Bordug This patch adds on-chip PCI bridge support for the PQ2 family. The incomplete existent code is updated with interrupt handling stuff and board-specific bits for 8272ADS and PQ2FADS; the related files were renamed (from m8260_pci to m82xx_pci) to be of more generic fashion. This is tested with 8266ADS and 8272ADS, should work on PQ2FADS as well. Signed-off-by: Vitaly Bordug Signed-off-by: Andrew Morton --- dev/null | 269 ------------------------ arch/ppc/Kconfig | 4 arch/ppc/platforms/pq2ads.h | 47 +--- arch/ppc/syslib/Makefile | 2 arch/ppc/syslib/m8260_pci_erratum9.c | 10 arch/ppc/syslib/m8260_setup.c | 11 - arch/ppc/syslib/m82xx_pci.c | 383 +++++++++++++++++++++++++++++++++++ arch/ppc/syslib/m82xx_pci.h | 92 ++++++++ include/asm-ppc/cpm2.h | 46 ++++ include/asm-ppc/m8260_pci.h | 1 include/asm-ppc/mpc8260.h | 2 11 files changed, 561 insertions(+), 306 deletions(-) diff -puN arch/ppc/Kconfig~ppc32-support-for-82xx-pqii-on-chip-pci-bridge arch/ppc/Kconfig --- 25/arch/ppc/Kconfig~ppc32-support-for-82xx-pqii-on-chip-pci-bridge Fri May 20 15:11:17 2005 +++ 25-akpm/arch/ppc/Kconfig Fri May 20 15:11:17 2005 @@ -1162,12 +1162,12 @@ config PCI_QSPAN config PCI_8260 bool - depends on PCI && 8260 && !8272 + depends on PCI && 8260 default y config 8260_PCI9 bool " Enable workaround for MPC826x erratum PCI 9" - depends on PCI_8260 + depends on PCI_8260 && !ADS8272 default y choice diff -puN arch/ppc/platforms/pq2ads.h~ppc32-support-for-82xx-pqii-on-chip-pci-bridge arch/ppc/platforms/pq2ads.h --- 25/arch/ppc/platforms/pq2ads.h~ppc32-support-for-82xx-pqii-on-chip-pci-bridge Fri May 20 15:11:17 2005 +++ 25-akpm/arch/ppc/platforms/pq2ads.h Fri May 20 15:11:17 2005 @@ -49,10 +49,10 @@ /* PCI interrupt controller */ #define PCI_INT_STAT_REG 0xF8200000 #define PCI_INT_MASK_REG 0xF8200004 -#define PIRQA (NR_SIU_INTS + 0) -#define PIRQB (NR_SIU_INTS + 1) -#define PIRQC (NR_SIU_INTS + 2) -#define PIRQD (NR_SIU_INTS + 3) +#define PIRQA (NR_CPM_INTS + 0) +#define PIRQB (NR_CPM_INTS + 1) +#define PIRQC (NR_CPM_INTS + 2) +#define PIRQD (NR_CPM_INTS + 3) /* * PCI memory map definitions for MPC8266ADS-PCI. @@ -68,28 +68,23 @@ * 0x00000000-0x1FFFFFFF 0x00000000-0x1FFFFFFF MPC8266 local memory */ -/* window for a PCI master to access MPC8266 memory */ -#define PCI_SLV_MEM_LOCAL 0x00000000 /* Local base */ -#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ - -/* window for the processor to access PCI memory with prefetching */ -#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ -#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ -#define PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */ - -/* window for the processor to access PCI memory without prefetching */ -#define PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */ -#define PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */ -#define PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */ - -/* window for the processor to access PCI I/O */ -#define PCI_MSTR_IO_LOCAL 0xF4000000 /* Local base */ -#define PCI_MSTR_IO_BUS 0x00000000 /* PCI base */ -#define PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */ - -#define _IO_BASE PCI_MSTR_IO_LOCAL -#define _ISA_MEM_BASE PCI_MSTR_MEMIO_LOCAL -#define PCI_DRAM_OFFSET PCI_SLV_MEM_BUS +/* All the other PCI memory map definitions reside at syslib/m82xx_pci.h + Here we should redefine what is unique for this board */ +#define M82xx_PCI_SLAVE_MEM_LOCAL 0x00000000 /* Local base */ +#define M82xx_PCI_SLAVE_MEM_BUS 0x00000000 /* PCI base */ +#define M82xx_PCI_SLAVE_MEM_SIZE 0x10000000 /* 256 Mb */ + +#define M82xx_PCI_SLAVE_SEC_WND_SIZE ~(0x40000000 - 1U) /* 2 x 512Mb */ +#define M82xx_PCI_SLAVE_SEC_WND_BASE 0x80000000 /* PCI Memory base */ + +#if defined(CONFIG_ADS8272) +#define PCI_INT_TO_SIU SIU_INT_IRQ2 +#elif defined(CONFIG_PQ2FADS) +#define PCI_INT_TO_SIU SIU_INT_IRQ6 +#else +#warning PCI Bridge will be without interrupts support +#endif + #endif /* CONFIG_PCI */ #endif /* __MACH_ADS8260_DEFS */ diff -L arch/ppc/syslib/m8260_pci.c -puN arch/ppc/syslib/m8260_pci.c~ppc32-support-for-82xx-pqii-on-chip-pci-bridge /dev/null --- 25/arch/ppc/syslib/m8260_pci.c +++ /dev/null Thu Apr 11 07:25:15 2002 @@ -1,193 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 Red Hat, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "m8260_pci.h" - - -/* PCI bus configuration registers. - */ - -static void __init m8260_setup_pci(struct pci_controller *hose) -{ - volatile cpm2_map_t *immap = cpm2_immr; - unsigned long pocmr; - u16 tempShort; - -#ifndef CONFIG_ATC /* already done in U-Boot */ - /* - * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), - * and local bus for PCI (SIUMCR [LBPC]). - */ - immap->im_siu_conf.siu_82xx.sc_siumcr = 0x00640000; -#endif - - /* Make PCI lowest priority */ - /* Each 4 bits is a device bus request and the MS 4bits - is highest priority */ - /* Bus 4bit value - --- ---------- - CPM high 0b0000 - CPM middle 0b0001 - CPM low 0b0010 - PCI reguest 0b0011 - Reserved 0b0100 - Reserved 0b0101 - Internal Core 0b0110 - External Master 1 0b0111 - External Master 2 0b1000 - External Master 3 0b1001 - The rest are reserved */ - immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893; - - /* Park bus on core while modifying PCI Bus accesses */ - immap->im_siu_conf.siu_82xx.sc_ppc_acr = 0x6; - - /* - * Set up master window that allows the CPU to access PCI space. This - * window is set up using the first SIU PCIBR registers. - */ - immap->im_memctl.memc_pcimsk0 = MPC826x_PCI_MASK; - immap->im_memctl.memc_pcibr0 = MPC826x_PCI_BASE | PCIBR_ENABLE; - - /* Disable machine check on no response or target abort */ - immap->im_pci.pci_emr = cpu_to_le32(0x1fe7); - /* Release PCI RST (by default the PCI RST signal is held low) */ - immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN); - - /* give it some time */ - mdelay(1); - - /* - * Set up master window that allows the CPU to access PCI Memory (prefetch) - * space. This window is set up using the first set of Outbound ATU registers. - */ - immap->im_pci.pci_potar0 = cpu_to_le32(MPC826x_PCI_LOWER_MEM >> 12); - immap->im_pci.pci_pobar0 = cpu_to_le32((MPC826x_PCI_LOWER_MEM - MPC826x_PCI_MEM_OFFSET) >> 12); - pocmr = ((MPC826x_PCI_UPPER_MEM - MPC826x_PCI_LOWER_MEM) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr0 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PREFETCH_EN); - - /* - * Set up master window that allows the CPU to access PCI Memory (non-prefetch) - * space. This window is set up using the second set of Outbound ATU registers. - */ - immap->im_pci.pci_potar1 = cpu_to_le32(MPC826x_PCI_LOWER_MMIO >> 12); - immap->im_pci.pci_pobar1 = cpu_to_le32((MPC826x_PCI_LOWER_MMIO - MPC826x_PCI_MMIO_OFFSET) >> 12); - pocmr = ((MPC826x_PCI_UPPER_MMIO - MPC826x_PCI_LOWER_MMIO) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr1 = cpu_to_le32(pocmr | POCMR_ENABLE); - - /* - * Set up master window that allows the CPU to access PCI IO space. This window - * is set up using the third set of Outbound ATU registers. - */ - immap->im_pci.pci_potar2 = cpu_to_le32(MPC826x_PCI_IO_BASE >> 12); - immap->im_pci.pci_pobar2 = cpu_to_le32(MPC826x_PCI_LOWER_IO >> 12); - pocmr = ((MPC826x_PCI_UPPER_IO - MPC826x_PCI_LOWER_IO) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr2 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PCI_IO); - - /* - * Set up slave window that allows PCI masters to access MPC826x local memory. - * This window is set up using the first set of Inbound ATU registers - */ - - immap->im_pci.pci_pitar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_LOCAL >> 12); - immap->im_pci.pci_pibar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_BUS >> 12); - pocmr = ((MPC826x_PCI_SLAVE_MEM_SIZE-1) >> 12) ^ 0xfffff; - immap->im_pci.pci_picmr0 = cpu_to_le32(pocmr | PICMR_ENABLE | PICMR_PREFETCH_EN); - - /* See above for description - puts PCI request as highest priority */ - immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567; - - /* Park the bus on the PCI */ - immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; - - /* Host mode - specify the bridge as a host-PCI bridge */ - early_write_config_word(hose, 0, 0, PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_HOST); - - /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */ - early_read_config_word(hose, 0, 0, PCI_COMMAND, &tempShort); - early_write_config_word(hose, 0, 0, PCI_COMMAND, - tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); -} - -void __init m8260_find_bridges(void) -{ - extern int pci_assign_all_busses; - struct pci_controller * hose; - - pci_assign_all_busses = 1; - - hose = pcibios_alloc_controller(); - - if (!hose) - return; - - ppc_md.pci_swizzle = common_swizzle; - - hose->first_busno = 0; - hose->bus_offset = 0; - hose->last_busno = 0xff; - - setup_m8260_indirect_pci(hose, - (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr, - (unsigned long)&cpm2_immr->im_pci.pci_cfg_data); - - m8260_setup_pci(hose); - hose->pci_mem_offset = MPC826x_PCI_MEM_OFFSET; - - hose->io_base_virt = ioremap(MPC826x_PCI_IO_BASE, - MPC826x_PCI_IO_SIZE); - isa_io_base = (unsigned long) hose->io_base_virt; - - /* setup resources */ - pci_init_resource(&hose->mem_resources[0], - MPC826x_PCI_LOWER_MEM, - MPC826x_PCI_UPPER_MEM, - IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory"); - - pci_init_resource(&hose->mem_resources[1], - MPC826x_PCI_LOWER_MMIO, - MPC826x_PCI_UPPER_MMIO, - IORESOURCE_MEM, "PCI memory"); - - pci_init_resource(&hose->io_resource, - MPC826x_PCI_LOWER_IO, - MPC826x_PCI_UPPER_IO, - IORESOURCE_IO, "PCI I/O"); -} diff -puN arch/ppc/syslib/m8260_pci_erratum9.c~ppc32-support-for-82xx-pqii-on-chip-pci-bridge arch/ppc/syslib/m8260_pci_erratum9.c --- 25/arch/ppc/syslib/m8260_pci_erratum9.c~ppc32-support-for-82xx-pqii-on-chip-pci-bridge Fri May 20 15:11:17 2005 +++ 25-akpm/arch/ppc/syslib/m8260_pci_erratum9.c Fri May 20 15:11:17 2005 @@ -31,7 +31,7 @@ #include #include -#include "m8260_pci.h" +#include "m82xx_pci.h" #ifdef CONFIG_8260_PCI9 /*#include */ /* included in asm/io.h */ @@ -248,11 +248,11 @@ EXPORT_SYMBOL(idma_pci9_read_le); static inline int is_pci_mem(unsigned long addr) { - if (addr >= MPC826x_PCI_LOWER_MMIO && - addr <= MPC826x_PCI_UPPER_MMIO) + if (addr >= M82xx_PCI_LOWER_MMIO && + addr <= M82xx_PCI_UPPER_MMIO) return 1; - if (addr >= MPC826x_PCI_LOWER_MEM && - addr <= MPC826x_PCI_UPPER_MEM) + if (addr >= M82xx_PCI_LOWER_MEM && + addr <= M82xx_PCI_UPPER_MEM) return 1; return 0; } diff -L arch/ppc/syslib/m8260_pci.h -puN arch/ppc/syslib/m8260_pci.h~ppc32-support-for-82xx-pqii-on-chip-pci-bridge /dev/null --- 25/arch/ppc/syslib/m8260_pci.h +++ /dev/null Thu Apr 11 07:25:15 2002 @@ -1,76 +0,0 @@ - -#ifndef _PPC_KERNEL_M8260_PCI_H -#define _PPC_KERNEL_M8260_PCI_H - -#include - -/* - * Local->PCI map (from CPU) controlled by - * MPC826x master window - * - * 0x80000000 - 0xBFFFFFFF Total CPU2PCI space PCIBR0 - * - * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1) - * 0xA0000000 - 0xAFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2) - * 0xB0000000 - 0xB0FFFFFF 32-bit PCI IO (Outbound ATU #3) - * - * PCI->Local map (from PCI) - * MPC826x slave window controlled by - * - * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1) - */ - -/* - * Slave window that allows PCI masters to access MPC826x local memory. - * This window is set up using the first set of Inbound ATU registers - */ - -#ifndef MPC826x_PCI_SLAVE_MEM_LOCAL -#define MPC826x_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart) -#define MPC826x_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart) -#define MPC826x_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize) -#endif - -/* - * This is the window that allows the CPU to access PCI address space. - * It will be setup with the SIU PCIBR0 register. All three PCI master - * windows, which allow the CPU to access PCI prefetch, non prefetch, - * and IO space (see below), must all fit within this window. - */ -#ifndef MPC826x_PCI_BASE -#define MPC826x_PCI_BASE 0x80000000 -#define MPC826x_PCI_MASK 0xc0000000 -#endif - -#ifndef MPC826x_PCI_LOWER_MEM -#define MPC826x_PCI_LOWER_MEM 0x80000000 -#define MPC826x_PCI_UPPER_MEM 0x9fffffff -#define MPC826x_PCI_MEM_OFFSET 0x00000000 -#endif - -#ifndef MPC826x_PCI_LOWER_MMIO -#define MPC826x_PCI_LOWER_MMIO 0xa0000000 -#define MPC826x_PCI_UPPER_MMIO 0xafffffff -#define MPC826x_PCI_MMIO_OFFSET 0x00000000 -#endif - -#ifndef MPC826x_PCI_LOWER_IO -#define MPC826x_PCI_LOWER_IO 0x00000000 -#define MPC826x_PCI_UPPER_IO 0x00ffffff -#define MPC826x_PCI_IO_BASE 0xb0000000 -#define MPC826x_PCI_IO_SIZE 0x01000000 -#endif - -#ifndef _IO_BASE -#define _IO_BASE isa_io_base -#endif - -#ifdef CONFIG_8260_PCI9 -struct pci_controller; -extern void setup_m8260_indirect_pci(struct pci_controller* hose, - u32 cfg_addr, u32 cfg_data); -#else -#define setup_m8260_indirect_pci setup_indirect_pci -#endif - -#endif /* _PPC_KERNEL_M8260_PCI_H */ diff -puN arch/ppc/syslib/m8260_setup.c~ppc32-support-for-82xx-pqii-on-chip-pci-bridge arch/ppc/syslib/m8260_setup.c --- 25/arch/ppc/syslib/m8260_setup.c~ppc32-support-for-82xx-pqii-on-chip-pci-bridge Fri May 20 15:11:17 2005 +++ 25-akpm/arch/ppc/syslib/m8260_setup.c Fri May 20 15:11:17 2005 @@ -34,7 +34,8 @@ unsigned char __res[sizeof(bd_t)]; extern void cpm2_reset(void); -extern void m8260_find_bridges(void); +extern void pq2_find_bridges(void); +extern void pq2pci_init_irq(void); extern void idma_pci9_init(void); /* Place-holder for board-specific init */ @@ -56,7 +57,7 @@ m8260_setup_arch(void) idma_pci9_init(); #endif #ifdef CONFIG_PCI_8260 - m8260_find_bridges(); + pq2_find_bridges(); #endif #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) @@ -173,6 +174,12 @@ m8260_init_IRQ(void) * in case the boot rom changed something on us. */ cpm2_immr->im_intctl.ic_siprr = 0x05309770; + +#if defined(CONFIG_PCI) && (defined(CONFIG_ADS8272) || defined(CONFIG_PQ2FADS)) + /* Initialize stuff for the 82xx CPLD IC and install demux */ + pq2pci_init_irq(); +#endif + } /* diff -puN /dev/null arch/ppc/syslib/m82xx_pci.c --- /dev/null Thu Apr 11 07:25:15 2002 +++ 25-akpm/arch/ppc/syslib/m82xx_pci.c Fri May 20 15:11:17 2005 @@ -0,0 +1,383 @@ +/* + * + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 Red Hat, Inc. + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "m82xx_pci.h" + +/* + * Interrupt routing + */ + +static inline int +pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { PIRQA, PIRQB, PIRQC, PIRQD }, /* IDSEL 22 - PCI slot 0 */ + { PIRQD, PIRQA, PIRQB, PIRQC }, /* IDSEL 23 - PCI slot 1 */ + { PIRQC, PIRQD, PIRQA, PIRQB }, /* IDSEL 24 - PCI slot 2 */ + }; + + const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +static void +pq2pci_mask_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit)); + return; +} + +static void +pq2pci_unmask_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit)); + return; +} + +static void +pq2pci_mask_and_ack(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit)); + return; +} + +static void +pq2pci_end_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit)); + return; +} + +struct hw_interrupt_type pq2pci_ic = { + "PQ2 PCI", + NULL, + NULL, + pq2pci_unmask_irq, + pq2pci_mask_irq, + pq2pci_mask_and_ack, + pq2pci_end_irq, + 0 +}; + +static irqreturn_t +pq2pci_irq_demux(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned long stat, mask, pend; + int bit; + + for(;;) { + stat = *(volatile unsigned long *) PCI_INT_STAT_REG; + mask = *(volatile unsigned long *) PCI_INT_MASK_REG; + pend = stat & ~mask & 0xf0000000; + if (!pend) + break; + for (bit = 0; pend != 0; ++bit, pend <<= 1) { + if (pend & 0x80000000) + __do_IRQ(NR_CPM_INTS + bit, regs); + } + } + + return IRQ_HANDLED; +} + +static struct irqaction pq2pci_irqaction = { + .handler = pq2pci_irq_demux, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, + .name = "PQ2 PCI cascade", +}; + + +void +pq2pci_init_irq(void) +{ + int irq; + volatile cpm2_map_t *immap = cpm2_immr; +#if defined CONFIG_ADS8272 + /* configure chip select for PCI interrupt controller */ + immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801; + immap->im_memctl.memc_or3 = 0xffff8010; +#elif defined CONFIG_PQ2FADS + immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801; + immap->im_memctl.memc_or8 = 0xffff8010; +#endif + for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++) + irq_desc[irq].handler = &pq2pci_ic; + + /* make PCI IRQ level sensitive */ + immap->im_intctl.ic_siexr &= + ~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1))); + + /* mask all PCI interrupts */ + *(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000; + + /* install the demultiplexer for the PCI cascade interrupt */ + setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction); + return; +} + +static int +pq2pci_exclude_device(u_char bus, u_char devfn) +{ + return PCIBIOS_SUCCESSFUL; +} + +/* PCI bus configuration registers. + */ +static void +pq2ads_setup_pci(struct pci_controller *hose) +{ + __u32 val; + volatile cpm2_map_t *immap = cpm2_immr; + bd_t* binfo = (bd_t*) __res; + u32 sccr = immap->im_clkrst.car_sccr; + uint pci_div,freq,time; + /* PCI int lowest prio */ + /* Each 4 bits is a device bus request and the MS 4bits + is highest priority */ + /* Bus 4bit value + --- ---------- + CPM high 0b0000 + CPM middle 0b0001 + CPM low 0b0010 + PCI reguest 0b0011 + Reserved 0b0100 + Reserved 0b0101 + Internal Core 0b0110 + External Master 1 0b0111 + External Master 2 0b1000 + External Master 3 0b1001 + The rest are reserved + */ + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893; + /* park bus on core */ + immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE; + /* + * Set up master windows that allow the CPU to access PCI space. These + * windows are set up using the two SIU PCIBR registers. + */ + + immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE; + immap->im_memctl.memc_pcibr0 = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE; + +#ifdef M82xx_PCI_SEC_WND_SIZE + immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE; + immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE; +#endif + +#if defined CONFIG_ADS8272 + immap->im_siu_conf.siu_82xx.sc_siumcr = + (immap->im_siu_conf.siu_82xx.sc_siumcr & + ~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE | + SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 | + SIUMCR_LBPC11 | SIUMCR_APPC11 | + SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) | + SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 | + SIUMCR_APPC10 | SIUMCR_CS10PC00 | + SIUMCR_BCTLC00 | SIUMCR_MMR11 ; + +#elif defined CONFIG_PQ2FADS + /* + * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), + * and local bus for PCI (SIUMCR [LBPC]). + */ + immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.sc_siumcr & + ~(SIUMCR_L2PC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) | + SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10; +#endif + /* Enable PCI */ + immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN); + + pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) * + ( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1); + freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div)); + time = (int)666666/freq; + /* due to PCI Local Bus spec, some devices needs to wait such a long + time after RST deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */ + printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq, + (time==1) ? "0.5 seconds":"1 second" ); + + { + int i; + for(i=0;i<(500*time);i++) + udelay(1000); + } + + /* setup ATU registers */ + immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO | + ((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT); + + /* Set-up non-prefetchable window */ + immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT); + + /* Set-up prefetchable window */ + immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN | + (~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT); + + /* Inbound transactions from PCI memory space */ + immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN | + ((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT)); + immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT); + immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT); + +#if defined CONFIG_ADS8272 + /* PCI int highest prio */ + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745; +#elif defined CONFIG_PQ2FADS + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567; +#endif + /* park bus on PCI */ + immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; + + /* Enable bus mastering and inbound memory transactions */ + early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val); + val &= 0xffff0000; + val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER; + early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val); + +} + +void __init pq2_find_bridges(void) +{ + extern int pci_assign_all_busses; + struct pci_controller * hose; + int host_bridge; + + pci_assign_all_busses = 1; + + hose = pcibios_alloc_controller(); + + if (!hose) + return; + + ppc_md.pci_swizzle = common_swizzle; + + hose->first_busno = 0; + hose->bus_offset = 0; + hose->last_busno = 0xff; + +#ifdef CONFIG_ADS8272 + hose->set_cfg_type = 1; +#endif + + setup_m8260_indirect_pci(hose, + (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr, + (unsigned long)&cpm2_immr->im_pci.pci_cfg_data); + + /* Make sure it is a supported bridge */ + early_read_config_dword(hose, + 0, + PCI_DEVFN(0,0), + PCI_VENDOR_ID, + &host_bridge); + switch (host_bridge) { + case PCI_DEVICE_ID_MPC8265: + break; + case PCI_DEVICE_ID_MPC8272: + break; + default: + printk("Attempting to use unrecognized host bridge ID" + " 0x%08x.\n", host_bridge); + break; + } + + pq2ads_setup_pci(hose); + + hose->io_space.start = M82xx_PCI_LOWER_IO; + hose->io_space.end = M82xx_PCI_UPPER_IO; + hose->mem_space.start = M82xx_PCI_LOWER_MEM; + hose->mem_space.end = M82xx_PCI_UPPER_MMIO; + hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET; + + isa_io_base = + (unsigned long) ioremap(M82xx_PCI_IO_BASE, + M82xx_PCI_IO_SIZE); + hose->io_base_virt = (void *) isa_io_base; + + /* setup resources */ + pci_init_resource(&hose->mem_resources[0], + M82xx_PCI_LOWER_MEM, + M82xx_PCI_UPPER_MEM, + IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory"); + + pci_init_resource(&hose->mem_resources[1], + M82xx_PCI_LOWER_MMIO, + M82xx_PCI_UPPER_MMIO, + IORESOURCE_MEM, "PCI memory"); + + pci_init_resource(&hose->io_resource, + M82xx_PCI_LOWER_IO, + M82xx_PCI_UPPER_IO, + IORESOURCE_IO | 1, "PCI I/O"); + + ppc_md.pci_exclude_device = pq2pci_exclude_device; + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + + ppc_md.pci_map_irq = pq2pci_map_irq; + ppc_md.pcibios_fixup = NULL; + ppc_md.pcibios_fixup_bus = NULL; + +} diff -puN /dev/null arch/ppc/syslib/m82xx_pci.h --- /dev/null Thu Apr 11 07:25:15 2002 +++ 25-akpm/arch/ppc/syslib/m82xx_pci.h Fri May 20 15:11:17 2005 @@ -0,0 +1,92 @@ + +#ifndef _PPC_KERNEL_M82XX_PCI_H +#define _PPC_KERNEL_M82XX_PCI_H + +#include +/* + * Local->PCI map (from CPU) controlled by + * MPC826x master window + * + * 0xF6000000 - 0xF7FFFFFF IO space + * 0x80000000 - 0xBFFFFFFF CPU2PCI memory space PCIBR0 + * + * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1) + * 0xA0000000 - 0xBFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2) + * 0xF6000000 - 0xF7FFFFFF 32-bit PCI IO (Outbound ATU #3) + * + * PCI->Local map (from PCI) + * MPC826x slave window controlled by + * + * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1) + */ + +/* + * Slave window that allows PCI masters to access MPC826x local memory. + * This window is set up using the first set of Inbound ATU registers + */ + +#ifndef M82xx_PCI_SLAVE_MEM_LOCAL +#define M82xx_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart) +#define M82xx_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart) +#define M82xx_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize) +#endif + +/* + * This is the window that allows the CPU to access PCI address space. + * It will be setup with the SIU PCIBR0 register. All three PCI master + * windows, which allow the CPU to access PCI prefetch, non prefetch, + * and IO space (see below), must all fit within this window. + */ + +#ifndef M82xx_PCI_LOWER_MEM +#define M82xx_PCI_LOWER_MEM 0x80000000 +#define M82xx_PCI_UPPER_MEM 0x9fffffff +#define M82xx_PCI_MEM_OFFSET 0x00000000 +#define M82xx_PCI_MEM_SIZE 0x20000000 +#endif + +#ifndef M82xx_PCI_LOWER_MMIO +#define M82xx_PCI_LOWER_MMIO 0xa0000000 +#define M82xx_PCI_UPPER_MMIO 0xafffffff +#define M82xx_PCI_MMIO_OFFSET 0x00000000 +#define M82xx_PCI_MMIO_SIZE 0x20000000 +#endif + +#ifndef M82xx_PCI_LOWER_IO +#define M82xx_PCI_LOWER_IO 0x00000000 +#define M82xx_PCI_UPPER_IO 0x01ffffff +#define M82xx_PCI_IO_BASE 0xf6000000 +#define M82xx_PCI_IO_SIZE 0x02000000 +#endif + +#ifndef M82xx_PCI_PRIM_WND_SIZE +#define M82xx_PCI_PRIM_WND_SIZE ~(M82xx_PCI_IO_SIZE - 1U) +#define M82xx_PCI_PRIM_WND_BASE (M82xx_PCI_IO_BASE) +#endif + +#ifndef M82xx_PCI_SEC_WND_SIZE +#define M82xx_PCI_SEC_WND_SIZE ~(M82xx_PCI_MEM_SIZE + M82xx_PCI_MMIO_SIZE - 1U) +#define M82xx_PCI_SEC_WND_BASE (M82xx_PCI_LOWER_MEM) +#endif + +#ifndef POTA_ADDR_SHIFT +#define POTA_ADDR_SHIFT 12 +#endif + +#ifndef PITA_ADDR_SHIFT +#define PITA_ADDR_SHIFT 12 +#endif + +#ifndef _IO_BASE +#define _IO_BASE isa_io_base +#endif + +#ifdef CONFIG_8260_PCI9 +struct pci_controller; +extern void setup_m8260_indirect_pci(struct pci_controller* hose, + u32 cfg_addr, u32 cfg_data); +#else +#define setup_m8260_indirect_pci setup_indirect_pci +#endif + +#endif /* _PPC_KERNEL_M8260_PCI_H */ diff -puN arch/ppc/syslib/Makefile~ppc32-support-for-82xx-pqii-on-chip-pci-bridge arch/ppc/syslib/Makefile --- 25/arch/ppc/syslib/Makefile~ppc32-support-for-82xx-pqii-on-chip-pci-bridge Fri May 20 15:11:17 2005 +++ 25-akpm/arch/ppc/syslib/Makefile Fri May 20 15:11:17 2005 @@ -81,7 +81,7 @@ obj-$(CONFIG_SBC82xx) += todc_time.o obj-$(CONFIG_SPRUCE) += cpc700_pic.o indirect_pci.o pci_auto.o \ todc_time.o obj-$(CONFIG_8260) += m8260_setup.o -obj-$(CONFIG_PCI_8260) += m8260_pci.o indirect_pci.o +obj-$(CONFIG_PCI_8260) += m82xx_pci.o indirect_pci.o pci_auto.o obj-$(CONFIG_8260_PCI9) += m8260_pci_erratum9.o obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o ifeq ($(CONFIG_PPC_GEN550),y) diff -puN include/asm-ppc/cpm2.h~ppc32-support-for-82xx-pqii-on-chip-pci-bridge include/asm-ppc/cpm2.h --- 25/include/asm-ppc/cpm2.h~ppc32-support-for-82xx-pqii-on-chip-pci-bridge Fri May 20 15:11:17 2005 +++ 25-akpm/include/asm-ppc/cpm2.h Fri May 20 15:11:17 2005 @@ -1039,6 +1039,52 @@ typedef struct im_idma { #define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */ #define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */ +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration Register 4-31 + */ +#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */ +#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */ +#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */ +#define SIUMCR_CDIS 0x10000000 /* Core Disable */ +#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/ +#define SIUMCR_DPPC01 0x04000000 /* - " - */ +#define SIUMCR_DPPC10 0x08000000 /* - " - */ +#define SIUMCR_DPPC11 0x0c000000 /* - " - */ +#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */ +#define SIUMCR_L2CPC01 0x01000000 /* - " - */ +#define SIUMCR_L2CPC10 0x02000000 /* - " - */ +#define SIUMCR_L2CPC11 0x03000000 /* - " - */ +#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */ +#define SIUMCR_LBPC01 0x00400000 /* - " - */ +#define SIUMCR_LBPC10 0x00800000 /* - " - */ +#define SIUMCR_LBPC11 0x00c00000 /* - " - */ +#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/ +#define SIUMCR_APPC01 0x00100000 /* - " - */ +#define SIUMCR_APPC10 0x00200000 /* - " - */ +#define SIUMCR_APPC11 0x00300000 /* - " - */ +#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */ +#define SIUMCR_CS10PC01 0x00040000 /* - " - */ +#define SIUMCR_CS10PC10 0x00080000 /* - " - */ +#define SIUMCR_CS10PC11 0x000c0000 /* - " - */ +#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */ +#define SIUMCR_BCTLC01 0x00010000 /* - " - */ +#define SIUMCR_BCTLC10 0x00020000 /* - " - */ +#define SIUMCR_BCTLC11 0x00030000 /* - " - */ +#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */ +#define SIUMCR_MMR01 0x00004000 /* - " - */ +#define SIUMCR_MMR10 0x00008000 /* - " - */ +#define SIUMCR_MMR11 0x0000c000 /* - " - */ +#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/ + +/*----------------------------------------------------------------------- + * SCCR - System Clock Control Register 9-8 +*/ +#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */ +#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */ +#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */ +#define SCCR_PCIDF_SHIFT 3 + + #endif /* __CPM2__ */ #endif /* __KERNEL__ */ diff -puN include/asm-ppc/m8260_pci.h~ppc32-support-for-82xx-pqii-on-chip-pci-bridge include/asm-ppc/m8260_pci.h --- 25/include/asm-ppc/m8260_pci.h~ppc32-support-for-82xx-pqii-on-chip-pci-bridge Fri May 20 15:11:17 2005 +++ 25-akpm/include/asm-ppc/m8260_pci.h Fri May 20 15:11:17 2005 @@ -19,6 +19,7 @@ * Define the vendor/device ID for the MPC8265. */ #define PCI_DEVICE_ID_MPC8265 ((0x18C0 << 16) | PCI_VENDOR_ID_MOTOROLA) +#define PCI_DEVICE_ID_MPC8272 ((0x18C1 << 16) | PCI_VENDOR_ID_MOTOROLA) #define M8265_PCIBR0 0x101ac #define M8265_PCIBR1 0x101b0 diff -puN include/asm-ppc/mpc8260.h~ppc32-support-for-82xx-pqii-on-chip-pci-bridge include/asm-ppc/mpc8260.h --- 25/include/asm-ppc/mpc8260.h~ppc32-support-for-82xx-pqii-on-chip-pci-bridge Fri May 20 15:11:17 2005 +++ 25-akpm/include/asm-ppc/mpc8260.h Fri May 20 15:11:17 2005 @@ -41,7 +41,7 @@ #endif #ifdef CONFIG_PCI_8260 -#include +#include #endif /* Make sure the memory translation stuff is there if PCI not used. _