From: Alex Aizman drivers/scsi/Kconfig changes. Signed-off-by: Alex Aizman Signed-off-by: Dmitry Yusupov Signed-off-by: Andrew Morton --- 25-akpm/drivers/scsi/Kconfig | 38 ++++++++++++++++++++++++++++++++++++++ 1 files changed, 38 insertions(+) diff -puN drivers/scsi/Kconfig~open-iscsi-kconfig drivers/scsi/Kconfig --- 25/drivers/scsi/Kconfig~open-iscsi-kconfig 2005-03-07 21:56:47.000000000 -0800 +++ 25-akpm/drivers/scsi/Kconfig 2005-03-07 21:56:47.000000000 -0800 @@ -185,6 +185,44 @@ config SCSI_LOGGING there should be no noticeable performance impact as long as you have logging turned off. +config ISCSI_IF + tristate "iSCSI Open Transport Interface" + depends on SCSI && INET + ---help--- + To compile this driver as a module, choose M here: the + module will be called iscsi_if. + + This driver manages multiple iSCSI transports. This module is required + for normal iscsid operation. + + See more detailed information here: + + http://www.open-iscsi.org + +config ISCSI_TCP + tristate "iSCSI Initiator over TCP/IP" + depends on ISCSI_IF + default y + select CRYPTO + select CRYPTO_MD5 + select CRYPTO_CRC32C + ---help--- + To compile this driver as a module, choose M here: the + module will be called iscsi_tcp. + + The iSCSI Driver provides a host with the ability to access storage + through an IP network. The driver uses the iSCSI protocol to transport + SCSI requests and responses over a TCP/IP network between the host + (the "initiator") and "targets". Architecturally, the iSCSI driver + combines with the host's TCP/IP stack, network drivers, and Network + Interface Card (NIC) to provide the same functions as a SCSI or a + Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA). + + The userspace component needed to initialize the driver, documentation, + and sample configuration files can be found here: + + http://www.open-iscsi.org + menu "SCSI Transport Attributes" depends on SCSI _