From: Domen Puncer Pretty trivial cleanups: - reordered #includes - improved some printk's (note: this actually enabled some debug printk's) - removed ()'s from returns - removed SONY_POLL_EACH_BYTE, as grep doesn't find it anywhere else - removed panic() as it can't happen. Signed-off-by: Domen Puncer Acked-by: Ondrej Zary Signed-off-by: Andrew Morton --- 25-akpm/drivers/cdrom/cdu31a.c | 389 +++++++++++++++-------------------------- 1 files changed, 150 insertions(+), 239 deletions(-) diff -puN drivers/cdrom/cdu31a.c~cdrom-cdu31a-cleanups drivers/cdrom/cdu31a.c --- 25/drivers/cdrom/cdu31a.c~cdrom-cdu31a-cleanups 2005-03-13 14:01:45.000000000 -0800 +++ 25-akpm/drivers/cdrom/cdu31a.c 2005-03-13 14:01:45.000000000 -0800 @@ -148,10 +148,10 @@ * Ondrej Zary */ -#include +#define DEBUG 1 +#include #include - #include #include #include @@ -166,13 +166,13 @@ #include #include #include +#include #include #include #include #include -#include #include "cdu31a.h" #define MAJOR_NR CDU31A_CDROM_MAJOR @@ -180,10 +180,7 @@ #define CDU31A_MAX_CONSECUTIVE_ATTENTIONS 10 -#define DEBUG 1 - -/* Define the following if you have data corruption problems. */ -#undef SONY_POLL_EACH_BYTE +#define PFX "CDU31A: " /* ** Edit the following data to change interrupts, DMA channels, etc. @@ -397,37 +394,37 @@ static inline void sony_sleep(void) */ static inline int is_attention(void) { - return ((inb(sony_cd_status_reg) & SONY_ATTN_BIT) != 0); + return (inb(sony_cd_status_reg) & SONY_ATTN_BIT) != 0; } static inline int is_busy(void) { - return ((inb(sony_cd_status_reg) & SONY_BUSY_BIT) != 0); + return (inb(sony_cd_status_reg) & SONY_BUSY_BIT) != 0; } static inline int is_data_ready(void) { - return ((inb(sony_cd_status_reg) & SONY_DATA_RDY_BIT) != 0); + return (inb(sony_cd_status_reg) & SONY_DATA_RDY_BIT) != 0; } static inline int is_data_requested(void) { - return ((inb(sony_cd_status_reg) & SONY_DATA_REQUEST_BIT) != 0); + return (inb(sony_cd_status_reg) & SONY_DATA_REQUEST_BIT) != 0; } static inline int is_result_ready(void) { - return ((inb(sony_cd_status_reg) & SONY_RES_RDY_BIT) != 0); + return (inb(sony_cd_status_reg) & SONY_RES_RDY_BIT) != 0; } static inline int is_param_write_rdy(void) { - return ((inb(sony_cd_fifost_reg) & SONY_PARAM_WRITE_RDY_BIT) != 0); + return (inb(sony_cd_fifost_reg) & SONY_PARAM_WRITE_RDY_BIT) != 0; } static inline int is_result_reg_not_empty(void) { - return ((inb(sony_cd_fifost_reg) & SONY_RES_REG_NOT_EMP_BIT) != 0); + return (inb(sony_cd_fifost_reg) & SONY_RES_REG_NOT_EMP_BIT) != 0; } static inline void reset_drive(void) @@ -478,17 +475,17 @@ static inline void clear_param_reg(void) static inline unsigned char read_status_register(void) { - return (inb(sony_cd_status_reg)); + return inb(sony_cd_status_reg); } static inline unsigned char read_result_register(void) { - return (inb(sony_cd_result_reg)); + return inb(sony_cd_result_reg); } static inline unsigned char read_data_register(void) { - return (inb(sony_cd_read_reg)); + return inb(sony_cd_read_reg); } static inline void write_param(unsigned char param) @@ -534,8 +531,8 @@ static irqreturn_t cdu31a_interrupt(int wake_up(&cdu31a_irq_wait); } else { disable_interrupts(); - printk - ("CDU31A: Got an interrupt but nothing was waiting\n"); + printk(KERN_NOTICE PFX + "Got an interrupt but nothing was waiting\n"); } return IRQ_HANDLED; } @@ -610,8 +607,8 @@ static void set_drive_params(int want_do do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD, params, 2, res_reg, &res_size); if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) { - printk(" Unable to set spin-down time: 0x%2.2x\n", - res_reg[1]); + printk(KERN_NOTICE PFX + "Unable to set spin-down time: 0x%2.2x\n", res_reg[1]); } params[0] = SONY_SD_MECH_CONTROL; @@ -627,8 +624,8 @@ static void set_drive_params(int want_do do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD, params, 2, res_reg, &res_size); if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) { - printk(" Unable to set mechanical parameters: 0x%2.2x\n", - res_reg[1]); + printk(KERN_NOTICE PFX "Unable to set mechanical " + "parameters: 0x%2.2x\n", res_reg[1]); } } @@ -672,7 +669,7 @@ static void restart_on_error(void) unsigned long retry_count; - printk("cdu31a: Resetting drive on error\n"); + printk(KERN_NOTICE PFX "Resetting drive on error\n"); reset_drive(); retry_count = jiffies + SONY_RESET_TIMEOUT; while (time_before(jiffies, retry_count) && (!is_attention())) { @@ -681,7 +678,7 @@ static void restart_on_error(void) set_drive_params(sony_speed); do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg, &res_size); if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) { - printk("cdu31a: Unable to spin up drive: 0x%2.2x\n", + printk(KERN_NOTICE PFX "Unable to spin up drive: 0x%2.2x\n", res_reg[1]); } @@ -741,9 +738,7 @@ get_result(unsigned char *result_buffer, while (handle_sony_cd_attention()); } if (is_busy() || (!(is_result_ready()))) { -#if DEBUG - printk("CDU31A timeout out %d\n", __LINE__); -#endif + pr_debug(PFX "timeout out %d\n", __LINE__); result_buffer[0] = 0x20; result_buffer[1] = SONY_TIMEOUT_OP_ERR; *result_size = 2; @@ -794,10 +789,8 @@ get_result(unsigned char *result_buffer, retry_count--; } if (!is_result_ready()) { -#if DEBUG - printk("CDU31A timeout out %d\n", + pr_debug(PFX "timeout out %d\n", __LINE__); -#endif result_buffer[0] = 0x20; result_buffer[1] = SONY_TIMEOUT_OP_ERR; @@ -823,10 +816,8 @@ get_result(unsigned char *result_buffer, retry_count--; } if (!is_result_ready()) { -#if DEBUG - printk("CDU31A timeout out %d\n", + pr_debug(PFX "timeout out %d\n", __LINE__); -#endif result_buffer[0] = 0x20; result_buffer[1] = SONY_TIMEOUT_OP_ERR; @@ -896,9 +887,7 @@ retry_cd_operation: while (handle_sony_cd_attention()); } if (is_busy()) { -#if DEBUG - printk("CDU31A timeout out %d\n", __LINE__); -#endif + pr_debug(PFX "timeout out %d\n", __LINE__); result_buffer[0] = 0x20; result_buffer[1] = SONY_TIMEOUT_OP_ERR; *result_size = 2; @@ -945,21 +934,18 @@ static int handle_sony_cd_attention(void volatile int val; -#if 0*DEBUG - printk("Entering handle_sony_cd_attention\n"); +#if 0 + pr_debug(PFX "Entering %s\n", __FUNCTION__); #endif if (is_attention()) { if (num_consecutive_attentions > CDU31A_MAX_CONSECUTIVE_ATTENTIONS) { - printk - ("cdu31a: Too many consecutive attentions: %d\n", - num_consecutive_attentions); + printk(KERN_NOTICE PFX "Too many consecutive " + "attentions: %d\n", num_consecutive_attentions); num_consecutive_attentions = 0; -#if DEBUG - printk("Leaving handle_sony_cd_attention at %d\n", + pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); -#endif - return (0); + return 0; } clear_attention(); @@ -999,11 +985,8 @@ static int handle_sony_cd_attention(void } num_consecutive_attentions++; -#if DEBUG - printk("Leaving handle_sony_cd_attention at %d\n", - __LINE__); -#endif - return (1); + pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); + return 1; } else if (abort_read_started) { while (is_result_reg_not_empty()) { val = read_result_register(); @@ -1015,18 +998,15 @@ static int handle_sony_cd_attention(void val = read_data_register(); } abort_read_started = 0; -#if DEBUG - printk("Leaving handle_sony_cd_attention at %d\n", - __LINE__); -#endif - return (1); + pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); + return 1; } num_consecutive_attentions = 0; -#if 0*DEBUG - printk("Leaving handle_sony_cd_attention at %d\n", __LINE__); +#if 0 + pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); #endif - return (0); + return 0; } @@ -1038,14 +1018,14 @@ static inline unsigned int int_to_bcd(un retval = (val / 10) << 4; retval = retval | val % 10; - return (retval); + return retval; } /* Convert from BCD to an integer from 0-99 */ static unsigned int bcd_to_int(unsigned int bcd) { - return ((((bcd >> 4) & 0x0f) * 10) + (bcd & 0x0f)); + return (((bcd >> 4) & 0x0f) * 10) + (bcd & 0x0f); } @@ -1105,9 +1085,7 @@ start_request(unsigned int sector, unsig unsigned long retry_count; -#if DEBUG - printk("Entering start_request\n"); -#endif + pr_debug(PFX "Entering %s\n", __FUNCTION__); log_to_msf(sector, params); size_to_buf(nsect, ¶ms[3]); @@ -1125,11 +1103,10 @@ start_request(unsigned int sector, unsig } if (is_busy()) { - printk("CDU31A: Timeout while waiting to issue command\n"); -#if DEBUG - printk("Leaving start_request at %d\n", __LINE__); -#endif - return (1); + printk(KERN_NOTICE PFX "Timeout while waiting " + "to issue command\n"); + pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); + return 1; } else { /* Issue the command */ clear_result_ready(); @@ -1140,14 +1117,10 @@ start_request(unsigned int sector, unsig sony_blocks_left = nsect * 4; sony_next_block = sector * 4; -#if DEBUG - printk("Leaving start_request at %d\n", __LINE__); -#endif - return (0); + pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); + return 0; } -#if DEBUG - printk("Leaving start_request at %d\n", __LINE__); -#endif + pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); } /* Abort a pending read operation. Clear all the drive status variables. */ @@ -1160,7 +1133,7 @@ static void abort_read(void) do_sony_cd_cmd(SONY_ABORT_CMD, NULL, 0, result_reg, &result_size); if ((result_reg[0] & 0xf0) == 0x20) { - printk("CDU31A: Error aborting read, %s error\n", + printk(KERN_ERR PFX "Aborting read, %s error\n", translate_error(result_reg[1])); } @@ -1183,9 +1156,7 @@ static void handle_abort_timeout(unsigne { unsigned long flags; -#if DEBUG - printk("Entering handle_abort_timeout\n"); -#endif + pr_debug(PFX "Entering %s\n", __FUNCTION__); save_flags(flags); cli(); /* If it is in use, ignore it. */ @@ -1202,18 +1173,14 @@ static void handle_abort_timeout(unsigne abort_read_started = 1; } restore_flags(flags); -#if DEBUG - printk("Leaving handle_abort_timeout\n"); -#endif + pr_debug(PFX "Leaving %s\n", __FUNCTION__); } /* Actually get one sector of data from the drive. */ static void input_data_sector(char *buffer) { -#if DEBUG - printk("Entering input_data_sector\n"); -#endif + pr_debug(PFX "Entering %s\n", __FUNCTION__); /* If an XA disk on a CDU31A, skip the first 12 bytes of data from the disk. The real data is after that. We can use audio_buffer. */ @@ -1229,9 +1196,7 @@ input_data_sector(char *buffer) if (sony_xa_mode) insb(sony_cd_read_reg, audio_buffer, CD_XA_TAIL); -#if DEBUG - printk("Leaving input_data_sector\n"); -#endif + pr_debug(PFX "Leaving %s\n", __FUNCTION__); } /* read data from the drive. Note the nsect must be <= 4. */ @@ -1243,9 +1208,7 @@ read_data_block(char *buffer, { unsigned long retry_count; -#if DEBUG - printk("Entering read_data_block\n"); -#endif + pr_debug(PFX "Entering %s\n", __FUNCTION__); res_reg[0] = 0; res_reg[1] = 0; @@ -1262,18 +1225,15 @@ read_data_block(char *buffer, if (is_result_ready()) { get_result(res_reg, res_size); if ((res_reg[0] & 0xf0) != 0x20) { - printk - ("CDU31A: Got result that should have been error: %d\n", - res_reg[0]); + printk(KERN_NOTICE PFX "Got result that should" + " have been error: %d\n", res_reg[0]); res_reg[0] = 0x20; res_reg[1] = SONY_BAD_DATA_ERR; *res_size = 2; } abort_read(); } else { -#if DEBUG - printk("CDU31A timeout out %d\n", __LINE__); -#endif + pr_debug(PFX "timeout out %d\n", __LINE__); res_reg[0] = 0x20; res_reg[1] = SONY_TIMEOUT_OP_ERR; *res_size = 2; @@ -1294,9 +1254,7 @@ read_data_block(char *buffer, } if (!is_result_ready()) { -#if DEBUG - printk("CDU31A timeout out %d\n", __LINE__); -#endif + pr_debug(PFX "timeout out %d\n", __LINE__); res_reg[0] = 0x20; res_reg[1] = SONY_TIMEOUT_OP_ERR; *res_size = 2; @@ -1315,9 +1273,8 @@ read_data_block(char *buffer, SONY_RECOV_LECC_ERR_BLK_STAT)) { /* nothing here */ } else { - printk - ("CDU31A: Data block error: 0x%x\n", - res_reg[0]); + printk(KERN_ERR PFX "Data block " + "error: 0x%x\n", res_reg[0]); res_reg[0] = 0x20; res_reg[1] = SONY_BAD_DATA_ERR; *res_size = 2; @@ -1330,9 +1287,8 @@ read_data_block(char *buffer, } else if ((res_reg[0] & 0xf0) != 0x20) { /* The drive gave me bad status, I don't know what to do. Reset the driver and return an error. */ - printk - ("CDU31A: Invalid block status: 0x%x\n", - res_reg[0]); + printk(KERN_ERR PFX "Invalid block " + "status: 0x%x\n", res_reg[0]); restart_on_error(); res_reg[0] = 0x20; res_reg[1] = SONY_BAD_DATA_ERR; @@ -1340,9 +1296,7 @@ read_data_block(char *buffer, } } } -#if DEBUG - printk("Leaving read_data_block at %d\n", __LINE__); -#endif + pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); } @@ -1361,12 +1315,9 @@ static void do_cdu31a_request(request_qu unsigned int res_size; unsigned long flags; + pr_debug(PFX "Entering %s\n", __FUNCTION__); -#if DEBUG - printk("Entering do_cdu31a_request\n"); -#endif - - /* + /* * Make sure no one else is using the driver; wait for them * to finish if it is so. */ @@ -1376,10 +1327,8 @@ static void do_cdu31a_request(request_qu interruptible_sleep_on(&sony_wait); if (signal_pending(current)) { restore_flags(flags); -#if DEBUG - printk("Leaving do_cdu31a_request at %d\n", + pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); -#endif return; } } @@ -1414,12 +1363,10 @@ static void do_cdu31a_request(request_qu block = req->sector; nblock = req->nr_sectors; -#if DEBUG - printk("CDU31A: request at block %d, length %d blocks\n", + pr_debug(PFX "request at block %d, length %d blocks\n", block, nblock); -#endif if (!sony_toc_read) { - printk("CDU31A: TOC not read\n"); + printk(KERN_NOTICE PFX "TOC not read\n"); end_request(req, 0); continue; } @@ -1431,14 +1378,13 @@ static void do_cdu31a_request(request_qu end_request(req, 0); continue; } - if (rq_data_dir(req) != READ) - panic("CDU31A: Unknown cmd"); + /* * If the block address is invalid or the request goes beyond the end of * the media, return an error. */ if (((block + nblock) / 4) >= sony_toc.lead_out_start_lba) { - printk("CDU31A: Request past end of media\n"); + printk(KERN_NOTICE PFX "Request past end of media\n"); end_request(req, 0); continue; } @@ -1451,7 +1397,7 @@ static void do_cdu31a_request(request_qu while (handle_sony_cd_attention()); if (!sony_toc_read) { - printk("CDU31A: TOC not read\n"); + printk(KERN_NOTICE PFX "TOC not read\n"); end_request(req, 0); continue; } @@ -1468,18 +1414,16 @@ static void do_cdu31a_request(request_qu the driver, abort the current operation and start a new one. */ else if (block != sony_next_block) { -#if DEBUG - printk("CDU31A Warning: Read for block %d, expected %d\n", + pr_debug(PFX "Read for block %d, expected %d\n", block, sony_next_block); -#endif abort_read(); if (!sony_toc_read) { - printk("CDU31A: TOC not read\n"); + printk(KERN_NOTICE PFX "TOC not read\n"); end_request(req, 0); continue; } if (start_request(block / 4, nblock / 4)) { - printk("CDU31a: start request failed\n"); + printk(KERN_NOTICE PFX "start request failed\n"); end_request(req, 0); continue; } @@ -1507,7 +1451,7 @@ static void do_cdu31a_request(request_qu do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg, &res_size); } else { - printk("CDU31A: %s error for block %d, nblock %d\n", + printk(KERN_NOTICE PFX "%s error for block %d, nblock %d\n", translate_error(res_reg[1]), block, nblock); } goto try_read_again; @@ -1528,9 +1472,7 @@ static void do_cdu31a_request(request_qu sony_inuse = 0; wake_up_interruptible(&sony_wait); restore_flags(flags); -#if DEBUG - printk("Leaving do_cdu31a_request at %d\n", __LINE__); -#endif + pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); } @@ -1549,9 +1491,7 @@ static void sony_get_toc(void) int mint = 99; int maxt = 0; -#if DEBUG - printk("Entering sony_get_toc\n"); -#endif + pr_debug(PFX "Entering %s\n", __FUNCTION__); num_spin_ups = 0; if (!sony_toc_read) { @@ -1602,16 +1542,12 @@ static void sony_get_toc(void) /* This seems to slow things down enough to make it work. This * appears to be a problem in do_sony_cd_cmd. This printk seems * to address the symptoms... -Erik */ -#if DEBUG - printk("cdu31a: Trying session %d\n", session); -#endif + pr_debug(PFX "Trying session %d\n", session); parms[0] = session; do_sony_cd_cmd(SONY_READ_TOC_SPEC_CMD, parms, 1, res_reg, &res_size); -#if DEBUG - printk("%2.2x %2.2x\n", res_reg[0], res_reg[1]); -#endif + pr_debug(PFX "%2.2x %2.2x\n", res_reg[0], res_reg[1]); if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) { @@ -1621,9 +1557,7 @@ static void sony_get_toc(void) ("Yikes! Couldn't read any sessions!"); break; } -#if DEBUG - printk("Reading session %d\n", session); -#endif + pr_debug(PFX "Reading session %d\n", session); parms[0] = session; do_sony_cd_cmd(SONY_REQ_TOC_DATA_SPEC_CMD, @@ -1634,8 +1568,8 @@ static void sony_get_toc(void) if ((res_size < 2) || ((single_toc.exec_status[0] & 0xf0) == 0x20)) { - printk - ("cdu31a: Error reading session %d: %x %s\n", + printk(KERN_ERR PFX "Error reading " + "session %d: %x %s\n", session, single_toc.exec_status[0], translate_error(single_toc. exec_status[1])); @@ -1643,29 +1577,27 @@ static void sony_get_toc(void) set. */ return; } -#if DEBUG - printk - ("add0 %01x, con0 %01x, poi0 %02x, 1st trk %d, dsktyp %x, dum0 %x\n", + pr_debug(PFX "add0 %01x, con0 %01x, poi0 %02x, " + "1st trk %d, dsktyp %x, dum0 %x\n", single_toc.address0, single_toc.control0, single_toc.point0, bcd_to_int(single_toc.first_track_num), single_toc.disk_type, single_toc.dummy0); - printk - ("add1 %01x, con1 %01x, poi1 %02x, lst trk %d, dummy1 %x, dum2 %x\n", + pr_debug(PFX "add1 %01x, con1 %01x, poi1 %02x, " + "lst trk %d, dummy1 %x, dum2 %x\n", single_toc.address1, single_toc.control1, single_toc.point1, bcd_to_int(single_toc.last_track_num), single_toc.dummy1, single_toc.dummy2); - printk - ("add2 %01x, con2 %01x, poi2 %02x leadout start min %d, sec %d, frame %d\n", + pr_debug(PFX "add2 %01x, con2 %01x, poi2 %02x " + "leadout start min %d, sec %d, frame %d\n", single_toc.address2, single_toc.control2, single_toc.point2, bcd_to_int(single_toc.lead_out_start_msf[0]), bcd_to_int(single_toc.lead_out_start_msf[1]), bcd_to_int(single_toc.lead_out_start_msf[2])); if (res_size > 18 && single_toc.pointb0 > 0xaf) - printk - ("addb0 %01x, conb0 %01x, poib0 %02x, nextsession min %d, sec %d, frame %d\n" + pr_debug(PFX "addb0 %01x, conb0 %01x, poib0 %02x, nextsession min %d, sec %d, frame %d\n" "#mode5_ptrs %02d, max_start_outer_leadout_msf min %d, sec %d, frame %d\n", single_toc.addressb0, single_toc.controlb0, @@ -1690,8 +1622,7 @@ static void sony_get_toc(void) max_start_outer_leadout_msf [2])); if (res_size > 27 && single_toc.pointb1 > 0xaf) - printk - ("addb1 %01x, conb1 %01x, poib1 %02x, %x %x %x %x #skipint_ptrs %d, #skiptrkassign %d %x\n", + pr_debug(PFX "addb1 %01x, conb1 %01x, poib1 %02x, %x %x %x %x #skipint_ptrs %d, #skiptrkassign %d %x\n", single_toc.addressb1, single_toc.controlb1, single_toc.pointb1, @@ -1703,8 +1634,7 @@ static void sony_get_toc(void) single_toc.num_skip_track_assignments, single_toc.dummyb0_2); if (res_size > 36 && single_toc.pointb2 > 0xaf) - printk - ("addb2 %01x, conb2 %01x, poib2 %02x, %02x %02x %02x %02x %02x %02x %02x\n", + pr_debug(PFX "addb2 %01x, conb2 %01x, poib2 %02x, %02x %02x %02x %02x %02x %02x %02x\n", single_toc.addressb2, single_toc.controlb2, single_toc.pointb2, @@ -1716,8 +1646,7 @@ static void sony_get_toc(void) single_toc.tracksb2[5], single_toc.tracksb2[6]); if (res_size > 45 && single_toc.pointb3 > 0xaf) - printk - ("addb3 %01x, conb3 %01x, poib3 %02x, %02x %02x %02x %02x %02x %02x %02x\n", + pr_debug(PFX "addb3 %01x, conb3 %01x, poib3 %02x, %02x %02x %02x %02x %02x %02x %02x\n", single_toc.addressb3, single_toc.controlb3, single_toc.pointb3, @@ -1729,8 +1658,7 @@ static void sony_get_toc(void) single_toc.tracksb3[5], single_toc.tracksb3[6]); if (res_size > 54 && single_toc.pointb4 > 0xaf) - printk - ("addb4 %01x, conb4 %01x, poib4 %02x, %02x %02x %02x %02x %02x %02x %02x\n", + pr_debug(PFX "addb4 %01x, conb4 %01x, poib4 %02x, %02x %02x %02x %02x %02x %02x %02x\n", single_toc.addressb4, single_toc.controlb4, single_toc.pointb4, @@ -1742,8 +1670,7 @@ static void sony_get_toc(void) single_toc.tracksb4[5], single_toc.tracksb4[6]); if (res_size > 63 && single_toc.pointc0 > 0xaf) - printk - ("addc0 %01x, conc0 %01x, poic0 %02x, %02x %02x %02x %02x %02x %02x %02x\n", + pr_debug(PFX "addc0 %01x, conc0 %01x, poic0 %02x, %02x %02x %02x %02x %02x %02x %02x\n", single_toc.addressc0, single_toc.controlc0, single_toc.pointc0, @@ -1754,7 +1681,6 @@ static void sony_get_toc(void) single_toc.dummyc0[4], single_toc.dummyc0[5], single_toc.dummyc0[6]); -#endif #undef DEBUG #define DEBUG 0 @@ -1823,8 +1749,8 @@ static void sony_get_toc(void) res_size += 9; } #if DEBUG - printk - ("start track lba %u, leadout start lba %u\n", + printk(PRINT_INFO PFX "start track lba %u, " + "leadout start lba %u\n", single_toc.start_track_lba, single_toc.lead_out_start_lba); { @@ -1836,8 +1762,7 @@ static void sony_get_toc(void) - bcd_to_int(single_toc. first_track_num); i++) { - printk - ("trk %02d: add 0x%01x, con 0x%01x, track %02d, start min %02d, sec %02d, frame %02d\n", + printk(KERN_INFO PFX "trk %02d: add 0x%01x, con 0x%01x, track %02d, start min %02d, sec %02d, frame %02d\n", i, single_toc.tracks[i].address, single_toc.tracks[i].control, @@ -1870,8 +1795,8 @@ static void sony_get_toc(void) tracks[i]. track); } - printk - ("min track number %d, max track number %d\n", + printk(KERN_INFO PFX "min track number %d, " + "max track number %d\n", mint, maxt); } #endif @@ -1976,8 +1901,8 @@ static void sony_get_toc(void) /* Let's not get carried away... */ if (session > 40) { - printk("cdu31a: too many sessions: %d\n", - session); + printk(KERN_NOTICE PFX "too many sessions: " + "%d\n", session); break; } session++; @@ -1995,17 +1920,13 @@ static void sony_get_toc(void) sony_toc.lead_out_start_msf[2]; sony_toc_read = 1; -#undef DEBUG -#if DEBUG - printk - ("Disk session %d, start track: %d, stop track: %d\n", + + pr_debug(PFX "Disk session %d, start track: %d, " + "stop track: %d\n", session, single_toc.start_track_lba, single_toc.lead_out_start_lba); -#endif } -#if DEBUG - printk("Leaving sony_get_toc\n"); -#endif + pr_debug(PFX "Leaving %s\n", __FUNCTION__); } @@ -2060,7 +1981,7 @@ static int read_subcode(void) 0, (unsigned char *) &last_sony_subcode, &res_size); if ((res_size < 2) || ((last_sony_subcode.exec_status[0] & 0xf0) == 0x20)) { - printk("Sony CDROM error %s (read_subcode)\n", + printk(KERN_ERR PFX "Sony CDROM error %s (read_subcode)\n", translate_error(last_sony_subcode.exec_status[1])); return -EIO; } @@ -2228,8 +2149,8 @@ read_audio_data(char *buffer, unsigned c } /* Invalid data from the drive. Shut down the operation. */ else if ((res_reg[0] & 0xf0) != 0x20) { - printk - ("CDU31A: Got result that should have been error: %d\n", + printk(KERN_WARNING PFX "Got result that " + "should have been error: %d\n", res_reg[0]); res_reg[0] = 0x20; res_reg[1] = SONY_BAD_DATA_ERR; @@ -2237,9 +2158,7 @@ read_audio_data(char *buffer, unsigned c } abort_read(); } else { -#if DEBUG - printk("CDU31A timeout out %d\n", __LINE__); -#endif + pr_debug(PFX "timeout out %d\n", __LINE__); res_reg[0] = 0x20; res_reg[1] = SONY_TIMEOUT_OP_ERR; *res_size = 2; @@ -2269,10 +2188,7 @@ read_audio_data(char *buffer, unsigned c } if (!is_result_ready()) { -#if DEBUG - printk("CDU31A timeout out %d\n", - __LINE__); -#endif + pr_debug(PFX "timeout out %d\n", __LINE__); res_reg[0] = 0x20; res_reg[1] = SONY_TIMEOUT_OP_ERR; *res_size = 2; @@ -2290,7 +2206,7 @@ read_audio_data(char *buffer, unsigned c || (res_reg[0] == SONY_NO_ERR_DETECTION_STAT)) { /* Ok, nothing to do. */ } else { - printk("CDU31A: Data block error: 0x%x\n", + printk(KERN_ERR PFX "Data block error: 0x%x\n", res_reg[0]); res_reg[0] = 0x20; res_reg[1] = SONY_BAD_DATA_ERR; @@ -2299,7 +2215,7 @@ read_audio_data(char *buffer, unsigned c } else if ((res_reg[0] & 0xf0) != 0x20) { /* The drive gave me bad status, I don't know what to do. Reset the driver and return an error. */ - printk("CDU31A: Invalid block status: 0x%x\n", + printk(KERN_NOTICE PFX "Invalid block status: 0x%x\n", res_reg[0]); restart_on_error(); res_reg[0] = 0x20; @@ -2347,7 +2263,7 @@ static int read_audio(struct cdrom_read_ do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD, params, 2, res_reg, &res_size); if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) { - printk("CDU31A: Unable to set decode params: 0x%2.2x\n", + printk(KERN_ERR PFX "Unable to set decode params: 0x%2.2x\n", res_reg[1]); return -EIO; } @@ -2368,8 +2284,8 @@ static int read_audio(struct cdrom_read_ read_audio_data(audio_buffer, res_reg, &res_size); if ((res_reg[0] & 0xf0) == 0x20) { if (res_reg[1] == SONY_BAD_DATA_ERR) { - printk - ("CDU31A: Data error on audio sector %d\n", + printk(KERN_ERR PFX "Data error on audio " + "sector %d\n", ra->addr.lba + cframe); } else if (res_reg[1] == SONY_ILL_TRACK_R_ERR) { /* Illegal track type, change track types and start over. */ @@ -2384,8 +2300,8 @@ static int read_audio(struct cdrom_read_ 2, res_reg, &res_size); if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) { - printk - ("CDU31A: Unable to set decode params: 0x%2.2x\n", + printk(KERN_ERR PFX "Unable to set " + "decode params: 0x%2.2x\n", res_reg[1]); retval = -EIO; goto exit_read_audio; @@ -2407,13 +2323,12 @@ static int read_audio(struct cdrom_read_ if ((res_reg[0] & 0xf0) == 0x20) { if (res_reg[1] == SONY_BAD_DATA_ERR) { - printk - ("CDU31A: Data error on audio sector %d\n", + printk(KERN_ERR PFX "Data error" + " on audio sector %d\n", ra->addr.lba + cframe); } else { - printk - ("CDU31A: Error reading audio data on sector %d: %s\n", + printk(KERN_ERR PFX "Error reading audio data on sector %d: %s\n", ra->addr.lba + cframe, translate_error (res_reg[1])); @@ -2429,8 +2344,8 @@ static int read_audio(struct cdrom_read_ goto exit_read_audio; } } else { - printk - ("CDU31A: Error reading audio data on sector %d: %s\n", + printk(KERN_ERR PFX "Error reading audio " + "data on sector %d: %s\n", ra->addr.lba + cframe, translate_error(res_reg[1])); retval = -EIO; @@ -2448,7 +2363,7 @@ static int read_audio(struct cdrom_read_ get_result(res_reg, &res_size); if ((res_reg[0] & 0xf0) == 0x20) { - printk("CDU31A: Error return from audio read: %s\n", + printk(KERN_ERR PFX "Error return from audio read: %s\n", translate_error(res_reg[1])); retval = -EIO; goto exit_read_audio; @@ -2466,7 +2381,7 @@ static int read_audio(struct cdrom_read_ do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD, params, 2, res_reg, &res_size); if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) { - printk("CDU31A: Unable to reset decode params: 0x%2.2x\n", + printk(KERN_ERR PFX "Unable to reset decode params: 0x%2.2x\n", res_reg[1]); return -EIO; } @@ -2475,7 +2390,7 @@ static int read_audio(struct cdrom_read_ sony_inuse = 0; wake_up_interruptible(&sony_wait); - return (retval); + return retval; } static int @@ -2488,7 +2403,7 @@ do_sony_cd_cmd_chk(const char *name, do_sony_cd_cmd(cmd, params, num_params, result_buffer, result_size); if ((*result_size < 2) || ((result_buffer[0] & 0xf0) == 0x20)) { - printk("Sony CDROM error %s (CDROM%s)\n", + printk(KERN_ERR PFX "Error %s (CDROM%s)\n", translate_error(result_buffer[1]), name); return -EIO; } @@ -2726,12 +2641,13 @@ static int scd_audio_ioctl(struct cdrom_ if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) { - printk("Params: %x %x %x %x %x %x %x\n", + printk(KERN_ERR PFX + "Params: %x %x %x %x %x %x %x\n", params[0], params[1], params[2], params[3], params[4], params[5], params[6]); - printk - ("Sony CDROM error %s (CDROMPLAYTRKIND)\n", + printk(KERN_ERR PFX + "Error %s (CDROMPLAYTRKIND)\n", translate_error(res_reg[1])); return -EIO; } @@ -2827,10 +2743,9 @@ static int scd_dev_ioctl(struct cdrom_de return -EINVAL; } - return (read_audio(&ra)); + return read_audio(&ra); } return 0; - break; default: return -EINVAL; @@ -2851,7 +2766,7 @@ static int scd_spinup(void) /* The drive sometimes returns error 0. I don't know why, but ignore it. It seems to mean the drive has already done the operation. */ if ((res_size < 2) || ((res_reg[0] != 0) && (res_reg[1] != 0))) { - printk("Sony CDROM %s error (scd_open, spin up)\n", + printk(KERN_ERR PFX "%s error (scd_open, spin up)\n", translate_error(res_reg[1])); return 1; } @@ -2875,7 +2790,7 @@ static int scd_spinup(void) goto respinup_on_open; } - printk("Sony CDROM error %s (scd_open, read toc)\n", + printk(KERN_ERR PFX "Error %s (scd_open, read toc)\n", translate_error(res_reg[1])); do_sony_cd_cmd(SONY_SPIN_DOWN_CMD, NULL, 0, res_reg, &res_size); @@ -2921,9 +2836,8 @@ static int scd_open(struct cdrom_device_ params, 2, res_reg, &res_size); if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) { - printk - ("CDU31A: Unable to set XA params: 0x%2.2x\n", - res_reg[1]); + printk(KERN_WARNING PFX "Unable to set " + "XA params: 0x%2.2x\n", res_reg[1]); } sony_xa_mode = 1; } @@ -2935,9 +2849,8 @@ static int scd_open(struct cdrom_device_ params, 2, res_reg, &res_size); if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) { - printk - ("CDU31A: Unable to reset XA params: 0x%2.2x\n", - res_reg[1]); + printk(KERN_WARNING PFX "Unable to reset " + "XA params: 0x%2.2x\n", res_reg[1]); } sony_xa_mode = 0; } @@ -3114,7 +3027,6 @@ out_err: #ifndef MODULE /* * Set up base I/O and interrupts, called from main.c. - */ static int __init cdu31a_setup(char *strings) @@ -3133,7 +3045,7 @@ static int __init cdu31a_setup(char *str if (strcmp(strings, "PAS") == 0) { sony_pas_init = 1; } else { - printk("CDU31A: Unknown interface type: %s\n", + printk(KERN_NOTICE PFX "Unknown interface type: %s\n", strings); } } @@ -3225,9 +3137,8 @@ int __init cdu31a_init(void) if (request_irq (cdu31a_irq, cdu31a_interrupt, SA_INTERRUPT, "cdu31a", NULL)) { - printk - ("Unable to grab IRQ%d for the CDU31A driver\n", - cdu31a_irq); + printk(KERN_WARNING PFX "Unable to grab IRQ%d for " + "the CDU31A driver\n", cdu31a_irq); cdu31a_irq = 0; } } @@ -3262,8 +3173,8 @@ int __init cdu31a_init(void) strcat(msg, buf); } strcat(msg, "\n"); - printk("%s",msg); - + printk(KERN_INFO PFX "%s",msg); + cdu31a_queue = blk_init_queue(do_cdu31a_request, &cdu31a_lock); if (!cdu31a_queue) goto errout0; @@ -3280,18 +3191,18 @@ int __init cdu31a_init(void) add_disk(disk); disk_changed = 1; - return (0); + return 0; err: blk_cleanup_queue(cdu31a_queue); errout0: if (cdu31a_irq) free_irq(cdu31a_irq, NULL); - printk("Unable to register CDU-31a with Uniform cdrom driver\n"); + printk(KERN_ERR PFX "Unable to register with Uniform cdrom driver\n"); put_disk(disk); errout1: if (unregister_blkdev(MAJOR_NR, "cdu31a")) { - printk("Can't unregister block device for cdu31a\n"); + printk(KERN_WARNING PFX "Can't unregister block device\n"); } errout2: release_region(cdu31a_port, 4); @@ -3305,12 +3216,12 @@ void __exit cdu31a_exit(void) del_gendisk(scd_gendisk); put_disk(scd_gendisk); if (unregister_cdrom(&scd_info)) { - printk - ("Can't unregister cdu31a from Uniform cdrom driver\n"); + printk(KERN_WARNING PFX "Can't unregister from Uniform " + "cdrom driver\n"); return; } if ((unregister_blkdev(MAJOR_NR, "cdu31a") == -EINVAL)) { - printk("Can't unregister cdu31a\n"); + printk(KERN_WARNING PFX "Can't unregister\n"); return; } @@ -3320,7 +3231,7 @@ void __exit cdu31a_exit(void) free_irq(cdu31a_irq, NULL); release_region(cdu31a_port, 4); - printk(KERN_INFO "cdu31a module released.\n"); + printk(KERN_INFO PFX "module released.\n"); } #ifdef MODULE _