From: "Antonino A. Daplas" #if defined(CONFIG_FB_SAVAGE_ACCEL) doesn't work with FB_SAVAGE_ACCEL=m, and #if defined(CONFIG_FB_SAVAGE_ACCEL) || defined(CONFIG_FB_SAVAGE_ACCEL_MODULE) would break with FB_SAVAGE=y and FB_SAVAGE_ACCEL=m. Rename savagefb.c to savagefb_driver.c. Signed-off-by: Adrian Bunk Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton --- /dev/null | 2276 ------------------------ 25-akpm/drivers/video/Kconfig | 4 25-akpm/drivers/video/savage/Makefile | 7 25-akpm/drivers/video/savage/savagefb-i2c.c | 3 25-akpm/drivers/video/savage/savagefb_accel.c | 4 25-akpm/drivers/video/savage/savagefb_driver.c | 2280 +++++++++++++++++++++++++ 6 files changed, 2286 insertions(+), 2288 deletions(-) diff -puN drivers/video/Kconfig~savagefb-make-savagefb-one-module drivers/video/Kconfig --- 25/drivers/video/Kconfig~savagefb-make-savagefb-one-module Sun Mar 6 17:18:10 2005 +++ 25-akpm/drivers/video/Kconfig Sun Mar 6 17:18:10 2005 @@ -1023,7 +1023,7 @@ config FB_SAVAGE will be called savagefb. config FB_SAVAGE_I2C - tristate "Enable DDC2 Support" + bool "Enable DDC2 Support" depends on FB_SAVAGE help This enables I2C support for S3 Savage Chipsets. This is used @@ -1035,7 +1035,7 @@ config FB_SAVAGE_I2C here. config FB_SAVAGE_ACCEL - tristate "Enable Console Acceleration" + bool "Enable Console Acceleration" depends on FB_SAVAGE default n help diff -puN drivers/video/savage/Makefile~savagefb-make-savagefb-one-module drivers/video/savage/Makefile --- 25/drivers/video/savage/Makefile~savagefb-make-savagefb-one-module Sun Mar 6 17:18:10 2005 +++ 25-akpm/drivers/video/savage/Makefile Sun Mar 6 17:18:10 2005 @@ -2,7 +2,8 @@ # Makefile for the S3 Savage framebuffer driver # -obj-$(CONFIG_FB_SAVAGE) += savagefb.o -obj-$(CONFIG_FB_SAVAGE_I2C) += savagefb-i2c.o -obj-$(CONFIG_FB_SAVAGE_ACCEL) += savagefb_accel.o +obj-$(CONFIG_FB_SAVAGE) += savagefb.o +savagefb-y += savagefb_driver.o +savagefb-$(CONFIG_FB_SAVAGE_I2C) += savagefb-i2c.o +savagefb-$(CONFIG_FB_SAVAGE_ACCEL) += savagefb_accel.o diff -puN drivers/video/savage/savagefb_accel.c~savagefb-make-savagefb-one-module drivers/video/savage/savagefb_accel.c --- 25/drivers/video/savage/savagefb_accel.c~savagefb-make-savagefb-one-module Sun Mar 6 17:18:10 2005 +++ 25-akpm/drivers/video/savage/savagefb_accel.c Sun Mar 6 17:18:10 2005 @@ -26,7 +26,6 @@ int savagefb_sync(struct fb_info *info) par->SavageWaitIdle(par); return 0; } -EXPORT_SYMBOL(savagefb_sync); void savagefb_copyarea(struct fb_info *info, const struct fb_copyarea *region) { @@ -61,7 +60,6 @@ void savagefb_copyarea(struct fb_info *i BCI_SEND(BCI_X_Y(dx, dy)); BCI_SEND(BCI_W_H(region->width, region->height)); } -EXPORT_SYMBOL(savagefb_copyarea); void savagefb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) { @@ -89,7 +87,6 @@ void savagefb_fillrect(struct fb_info *i BCI_SEND( BCI_X_Y(rect->dx, rect->dy) ); BCI_SEND( BCI_W_H(rect->width, rect->height) ); } -EXPORT_SYMBOL(savagefb_fillrect); void savagefb_imageblit(struct fb_info *info, const struct fb_image *image) { @@ -135,6 +132,5 @@ void savagefb_imageblit(struct fb_info * for (i = 0; i < size; i++) BCI_SEND(src[i]); } -EXPORT_SYMBOL(savagefb_imageblit); MODULE_LICENSE("GPL"); diff -L drivers/video/savage/savagefb.c -puN drivers/video/savage/savagefb.c~savagefb-make-savagefb-one-module /dev/null --- 25/drivers/video/savage/savagefb.c +++ /dev/null Thu Apr 11 07:25:15 2002 @@ -1,2276 +0,0 @@ -/* - * linux/drivers/video/savagefb.c -- S3 Savage Framebuffer Driver - * - * Copyright (c) 2001-2002 Denis Oliver Kropp - * Sven Neumann - * - * - * Card specific code is based on XFree86's savage driver. - * Framebuffer framework code is based on code of cyber2000fb and tdfxfb. - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * 0.4.0 (neo) - * - hardware accelerated clear and move - * - * 0.3.2 (dok) - * - wait for vertical retrace before writing to cr67 - * at the beginning of savagefb_set_par - * - use synchronization registers cr23 and cr26 - * - * 0.3.1 (dok) - * - reset 3D engine - * - don't return alpha bits for 32bit format - * - * 0.3.0 (dok) - * - added WaitIdle functions for all Savage types - * - do WaitIdle before mode switching - * - code cleanup - * - * 0.2.0 (dok) - * - first working version - * - * - * TODO - * - clock validations in decode_var - * - * BUGS - * - white margin on bootup - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#ifdef CONFIG_MTRR -#include -#endif - -#include "savagefb.h" - - -#define SAVAGEFB_VERSION "0.4.0_2.6" - -/* --------------------------------------------------------------------- */ - - -static char *mode_option __initdata = NULL; -static int paletteEnabled = 0; - -#ifdef MODULE - -MODULE_AUTHOR("(c) 2001-2002 Denis Oliver Kropp "); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("FBDev driver for S3 Savage PCI/AGP Chips"); - -#endif - - -/* --------------------------------------------------------------------- */ - -static void vgaHWSeqReset (struct savagefb_par *par, int start) -{ - if (start) - VGAwSEQ (0x00, 0x01); /* Synchronous Reset */ - else - VGAwSEQ (0x00, 0x03); /* End Reset */ -} - -static void vgaHWProtect (struct savagefb_par *par, int on) -{ - unsigned char tmp; - - if (on) { - /* - * Turn off screen and disable sequencer. - */ - tmp = VGArSEQ (0x01); - - vgaHWSeqReset (par, 1); /* start synchronous reset */ - VGAwSEQ (0x01, tmp | 0x20); /* disable the display */ - - VGAenablePalette(); - } else { - /* - * Reenable sequencer, then turn on screen. - */ - - tmp = VGArSEQ (0x01); - - VGAwSEQ (0x01, tmp & ~0x20); /* reenable display */ - vgaHWSeqReset (par, 0); /* clear synchronous reset */ - - VGAdisablePalette(); - } -} - -static void vgaHWRestore (struct savagefb_par *par) -{ - int i; - - VGAwMISC (par->MiscOutReg); - - for (i = 1; i < 5; i++) - VGAwSEQ (i, par->Sequencer[i]); - - /* Ensure CRTC registers 0-7 are unlocked by clearing bit 7 or - CRTC[17] */ - VGAwCR (17, par->CRTC[17] & ~0x80); - - for (i = 0; i < 25; i++) - VGAwCR (i, par->CRTC[i]); - - for (i = 0; i < 9; i++) - VGAwGR (i, par->Graphics[i]); - - VGAenablePalette(); - - for (i = 0; i < 21; i++) - VGAwATTR (i, par->Attribute[i]); - - VGAdisablePalette(); -} - -static void vgaHWInit (struct fb_var_screeninfo *var, - struct savagefb_par *par, - struct xtimings *timings) -{ - par->MiscOutReg = 0x23; - - if (!(timings->sync & FB_SYNC_HOR_HIGH_ACT)) - par->MiscOutReg |= 0x40; - - if (!(timings->sync & FB_SYNC_VERT_HIGH_ACT)) - par->MiscOutReg |= 0x80; - - /* - * Time Sequencer - */ - par->Sequencer[0x00] = 0x00; - par->Sequencer[0x01] = 0x01; - par->Sequencer[0x02] = 0x0F; - par->Sequencer[0x03] = 0x00; /* Font select */ - par->Sequencer[0x04] = 0x0E; /* Misc */ - - /* - * CRTC Controller - */ - par->CRTC[0x00] = (timings->HTotal >> 3) - 5; - par->CRTC[0x01] = (timings->HDisplay >> 3) - 1; - par->CRTC[0x02] = (timings->HSyncStart >> 3) - 1; - par->CRTC[0x03] = (((timings->HSyncEnd >> 3) - 1) & 0x1f) | 0x80; - par->CRTC[0x04] = (timings->HSyncStart >> 3); - par->CRTC[0x05] = ((((timings->HSyncEnd >> 3) - 1) & 0x20) << 2) | - (((timings->HSyncEnd >> 3)) & 0x1f); - par->CRTC[0x06] = (timings->VTotal - 2) & 0xFF; - par->CRTC[0x07] = (((timings->VTotal - 2) & 0x100) >> 8) | - (((timings->VDisplay - 1) & 0x100) >> 7) | - ((timings->VSyncStart & 0x100) >> 6) | - (((timings->VSyncStart - 1) & 0x100) >> 5) | - 0x10 | - (((timings->VTotal - 2) & 0x200) >> 4) | - (((timings->VDisplay - 1) & 0x200) >> 3) | - ((timings->VSyncStart & 0x200) >> 2); - par->CRTC[0x08] = 0x00; - par->CRTC[0x09] = (((timings->VSyncStart - 1) & 0x200) >> 4) | 0x40; - - if (timings->dblscan) - par->CRTC[0x09] |= 0x80; - - par->CRTC[0x0a] = 0x00; - par->CRTC[0x0b] = 0x00; - par->CRTC[0x0c] = 0x00; - par->CRTC[0x0d] = 0x00; - par->CRTC[0x0e] = 0x00; - par->CRTC[0x0f] = 0x00; - par->CRTC[0x10] = timings->VSyncStart & 0xff; - par->CRTC[0x11] = (timings->VSyncEnd & 0x0f) | 0x20; - par->CRTC[0x12] = (timings->VDisplay - 1) & 0xff; - par->CRTC[0x13] = var->xres_virtual >> 4; - par->CRTC[0x14] = 0x00; - par->CRTC[0x15] = (timings->VSyncStart - 1) & 0xff; - par->CRTC[0x16] = (timings->VSyncEnd - 1) & 0xff; - par->CRTC[0x17] = 0xc3; - par->CRTC[0x18] = 0xff; - - /* - * are these unnecessary? - * vgaHWHBlankKGA(mode, regp, 0, KGA_FIX_OVERSCAN|KGA_ENABLE_ON_ZERO); - * vgaHWVBlankKGA(mode, regp, 0, KGA_FIX_OVERSCAN|KGA_ENABLE_ON_ZERO); - */ - - /* - * Graphics Display Controller - */ - par->Graphics[0x00] = 0x00; - par->Graphics[0x01] = 0x00; - par->Graphics[0x02] = 0x00; - par->Graphics[0x03] = 0x00; - par->Graphics[0x04] = 0x00; - par->Graphics[0x05] = 0x40; - par->Graphics[0x06] = 0x05; /* only map 64k VGA memory !!!! */ - par->Graphics[0x07] = 0x0F; - par->Graphics[0x08] = 0xFF; - - - par->Attribute[0x00] = 0x00; /* standard colormap translation */ - par->Attribute[0x01] = 0x01; - par->Attribute[0x02] = 0x02; - par->Attribute[0x03] = 0x03; - par->Attribute[0x04] = 0x04; - par->Attribute[0x05] = 0x05; - par->Attribute[0x06] = 0x06; - par->Attribute[0x07] = 0x07; - par->Attribute[0x08] = 0x08; - par->Attribute[0x09] = 0x09; - par->Attribute[0x0a] = 0x0A; - par->Attribute[0x0b] = 0x0B; - par->Attribute[0x0c] = 0x0C; - par->Attribute[0x0d] = 0x0D; - par->Attribute[0x0e] = 0x0E; - par->Attribute[0x0f] = 0x0F; - par->Attribute[0x10] = 0x41; - par->Attribute[0x11] = 0xFF; - par->Attribute[0x12] = 0x0F; - par->Attribute[0x13] = 0x00; - par->Attribute[0x14] = 0x00; -} - -/* -------------------- Hardware specific routines ------------------------- */ - -/* - * Hardware Acceleration for SavageFB - */ - -/* Wait for fifo space */ -static void -savage3D_waitfifo(struct savagefb_par *par, int space) -{ - int slots = MAXFIFO - space; - - while ((savage_in32(0x48C00) & 0x0000ffff) > slots); -} - -static void -savage4_waitfifo(struct savagefb_par *par, int space) -{ - int slots = MAXFIFO - space; - - while ((savage_in32(0x48C60) & 0x001fffff) > slots); -} - -static void -savage2000_waitfifo(struct savagefb_par *par, int space) -{ - int slots = MAXFIFO - space; - - while ((savage_in32(0x48C60) & 0x0000ffff) > slots); -} - -/* Wait for idle accelerator */ -static void -savage3D_waitidle(struct savagefb_par *par) -{ - while ((savage_in32(0x48C00) & 0x0008ffff) != 0x80000); -} - -static void -savage4_waitidle(struct savagefb_par *par) -{ - while ((savage_in32(0x48C60) & 0x00a00000) != 0x00a00000); -} - -static void -savage2000_waitidle(struct savagefb_par *par) -{ - while ((savage_in32(0x48C60) & 0x009fffff)); -} - - -static void -SavageSetup2DEngine (struct savagefb_par *par) -{ - unsigned long GlobalBitmapDescriptor; - - GlobalBitmapDescriptor = 1 | 8 | BCI_BD_BW_DISABLE; - BCI_BD_SET_BPP (GlobalBitmapDescriptor, par->depth); - BCI_BD_SET_STRIDE (GlobalBitmapDescriptor, par->vwidth); - - switch(par->chip) { - case S3_SAVAGE3D: - case S3_SAVAGE_MX: - /* Disable BCI */ - savage_out32(0x48C18, savage_in32(0x48C18) & 0x3FF0); - /* Setup BCI command overflow buffer */ - savage_out32(0x48C14, (par->cob_offset >> 11) | (par->cob_index << 29)); - /* Program shadow status update. */ - savage_out32(0x48C10, 0x78207220); - savage_out32(0x48C0C, 0); - /* Enable BCI and command overflow buffer */ - savage_out32(0x48C18, savage_in32(0x48C18) | 0x0C); - break; - case S3_SAVAGE4: - case S3_PROSAVAGE: - case S3_SUPERSAVAGE: - /* Disable BCI */ - savage_out32(0x48C18, savage_in32(0x48C18) & 0x3FF0); - /* Program shadow status update */ - savage_out32(0x48C10, 0x00700040); - savage_out32(0x48C0C, 0); - /* Enable BCI without the COB */ - savage_out32(0x48C18, savage_in32(0x48C18) | 0x08); - break; - case S3_SAVAGE2000: - /* Disable BCI */ - savage_out32(0x48C18, 0); - /* Setup BCI command overflow buffer */ - savage_out32(0x48C18, (par->cob_offset >> 7) | (par->cob_index)); - /* Disable shadow status update */ - savage_out32(0x48A30, 0); - /* Enable BCI and command overflow buffer */ - savage_out32(0x48C18, savage_in32(0x48C18) | 0x00280000 ); - break; - default: - break; - } - /* Turn on 16-bit register access. */ - vga_out8(0x3d4, 0x31); - vga_out8(0x3d5, 0x0c); - - /* Set stride to use GBD. */ - vga_out8 (0x3d4, 0x50); - vga_out8 (0x3d5, vga_in8 (0x3d5 ) | 0xC1); - - /* Enable 2D engine. */ - vga_out8 (0x3d4, 0x40 ); - vga_out8 (0x3d5, 0x01 ); - - savage_out32 (MONO_PAT_0, ~0); - savage_out32 (MONO_PAT_1, ~0); - - /* Setup plane masks */ - savage_out32 (0x8128, ~0 ); /* enable all write planes */ - savage_out32 (0x812C, ~0 ); /* enable all read planes */ - savage_out16 (0x8134, 0x27 ); - savage_out16 (0x8136, 0x07 ); - - /* Now set the GBD */ - par->bci_ptr = 0; - par->SavageWaitFifo (par, 4); - - BCI_SEND( BCI_CMD_SETREG | (1 << 16) | BCI_GBD1 ); - BCI_SEND( 0 ); - BCI_SEND( BCI_CMD_SETREG | (1 << 16) | BCI_GBD2 ); - BCI_SEND( GlobalBitmapDescriptor ); -} - - -static void SavageCalcClock(long freq, int min_m, int min_n1, int max_n1, - int min_n2, int max_n2, long freq_min, - long freq_max, unsigned int *mdiv, - unsigned int *ndiv, unsigned int *r) -{ - long diff, best_diff; - unsigned int m; - unsigned char n1, n2, best_n1=16+2, best_n2=2, best_m=125+2; - - if (freq < freq_min / (1 << max_n2)) { - printk (KERN_ERR "invalid frequency %ld Khz\n", freq); - freq = freq_min / (1 << max_n2); - } - if (freq > freq_max / (1 << min_n2)) { - printk (KERN_ERR "invalid frequency %ld Khz\n", freq); - freq = freq_max / (1 << min_n2); - } - - /* work out suitable timings */ - best_diff = freq; - - for (n2=min_n2; n2<=max_n2; n2++) { - for (n1=min_n1+2; n1<=max_n1+2; n1++) { - m = (freq * n1 * (1 << n2) + HALF_BASE_FREQ) / - BASE_FREQ; - if (m < min_m+2 || m > 127+2) - continue; - if ((m * BASE_FREQ >= freq_min * n1) && - (m * BASE_FREQ <= freq_max * n1)) { - diff = freq * (1 << n2) * n1 - BASE_FREQ * m; - if (diff < 0) - diff = -diff; - if (diff < best_diff) { - best_diff = diff; - best_m = m; - best_n1 = n1; - best_n2 = n2; - } - } - } - } - - *ndiv = best_n1 - 2; - *r = best_n2; - *mdiv = best_m - 2; -} - -static int common_calc_clock(long freq, int min_m, int min_n1, int max_n1, - int min_n2, int max_n2, long freq_min, - long freq_max, unsigned char *mdiv, - unsigned char *ndiv) -{ - long diff, best_diff; - unsigned int m; - unsigned char n1, n2; - unsigned char best_n1 = 16+2, best_n2 = 2, best_m = 125+2; - - best_diff = freq; - - for (n2 = min_n2; n2 <= max_n2; n2++) { - for (n1 = min_n1+2; n1 <= max_n1+2; n1++) { - m = (freq * n1 * (1 << n2) + HALF_BASE_FREQ) / - BASE_FREQ; - if (m < min_m + 2 || m > 127+2) - continue; - if((m * BASE_FREQ >= freq_min * n1) && - (m * BASE_FREQ <= freq_max * n1)) { - diff = freq * (1 << n2) * n1 - BASE_FREQ * m; - if(diff < 0) - diff = -diff; - if(diff < best_diff) { - best_diff = diff; - best_m = m; - best_n1 = n1; - best_n2 = n2; - } - } - } - } - - if(max_n1 == 63) - *ndiv = (best_n1 - 2) | (best_n2 << 6); - else - *ndiv = (best_n1 - 2) | (best_n2 << 5); - - *mdiv = best_m - 2; - - return 0; -} - -#ifdef SAVAGEFB_DEBUG -/* This function is used to debug, it prints out the contents of s3 regs */ - -static void SavagePrintRegs(void) -{ - unsigned char i; - int vgaCRIndex = 0x3d4; - int vgaCRReg = 0x3d5; - - printk(KERN_DEBUG "SR x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE " - "xF" ); - - for( i = 0; i < 0x70; i++ ) { - if( !(i % 16) ) - printk(KERN_DEBUG "\nSR%xx ", i >> 4 ); - vga_out8( 0x3c4, i ); - printk(KERN_DEBUG " %02x", vga_in8(0x3c5) ); - } - - printk(KERN_DEBUG "\n\nCR x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC " - "xD xE xF" ); - - for( i = 0; i < 0xB7; i++ ) { - if( !(i % 16) ) - printk(KERN_DEBUG "\nCR%xx ", i >> 4 ); - vga_out8( vgaCRIndex, i ); - printk(KERN_DEBUG " %02x", vga_in8(vgaCRReg) ); - } - - printk(KERN_DEBUG "\n\n"); -} -#endif - -/* --------------------------------------------------------------------- */ - -static void savage_get_default_par(struct savagefb_par *par) -{ - unsigned char cr3a, cr53, cr66; - - vga_out16 (0x3d4, 0x4838); - vga_out16 (0x3d4, 0xa039); - vga_out16 (0x3c4, 0x0608); - - vga_out8 (0x3d4, 0x66); - cr66 = vga_in8 (0x3d5); - vga_out8 (0x3d5, cr66 | 0x80); - vga_out8 (0x3d4, 0x3a); - cr3a = vga_in8 (0x3d5); - vga_out8 (0x3d5, cr3a | 0x80); - vga_out8 (0x3d4, 0x53); - cr53 = vga_in8 (0x3d5); - vga_out8 (0x3d5, cr53 & 0x7f); - - vga_out8 (0x3d4, 0x66); - vga_out8 (0x3d5, cr66); - vga_out8 (0x3d4, 0x3a); - vga_out8 (0x3d5, cr3a); - - vga_out8 (0x3d4, 0x66); - vga_out8 (0x3d5, cr66); - vga_out8 (0x3d4, 0x3a); - vga_out8 (0x3d5, cr3a); - - /* unlock extended seq regs */ - vga_out8 (0x3c4, 0x08); - par->SR08 = vga_in8 (0x3c5); - vga_out8 (0x3c5, 0x06); - - /* now save all the extended regs we need */ - vga_out8 (0x3d4, 0x31); - par->CR31 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x32); - par->CR32 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x34); - par->CR34 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x36); - par->CR36 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x3a); - par->CR3A = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x40); - par->CR40 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x42); - par->CR42 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x45); - par->CR45 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x50); - par->CR50 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x51); - par->CR51 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x53); - par->CR53 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x58); - par->CR58 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x60); - par->CR60 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x66); - par->CR66 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x67); - par->CR67 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x68); - par->CR68 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x69); - par->CR69 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x6f); - par->CR6F = vga_in8 (0x3d5); - - vga_out8 (0x3d4, 0x33); - par->CR33 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x86); - par->CR86 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x88); - par->CR88 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x90); - par->CR90 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x91); - par->CR91 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0xb0); - par->CRB0 = vga_in8 (0x3d5) | 0x80; - - /* extended mode timing regs */ - vga_out8 (0x3d4, 0x3b); - par->CR3B = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x3c); - par->CR3C = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x43); - par->CR43 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x5d); - par->CR5D = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x5e); - par->CR5E = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x65); - par->CR65 = vga_in8 (0x3d5); - - /* save seq extended regs for DCLK PLL programming */ - vga_out8 (0x3c4, 0x0e); - par->SR0E = vga_in8 (0x3c5); - vga_out8 (0x3c4, 0x0f); - par->SR0F = vga_in8 (0x3c5); - vga_out8 (0x3c4, 0x10); - par->SR10 = vga_in8 (0x3c5); - vga_out8 (0x3c4, 0x11); - par->SR11 = vga_in8 (0x3c5); - vga_out8 (0x3c4, 0x12); - par->SR12 = vga_in8 (0x3c5); - vga_out8 (0x3c4, 0x13); - par->SR13 = vga_in8 (0x3c5); - vga_out8 (0x3c4, 0x29); - par->SR29 = vga_in8 (0x3c5); - - vga_out8 (0x3c4, 0x15); - par->SR15 = vga_in8 (0x3c5); - vga_out8 (0x3c4, 0x30); - par->SR30 = vga_in8 (0x3c5); - vga_out8 (0x3c4, 0x18); - par->SR18 = vga_in8 (0x3c5); - - /* Save flat panel expansion regsters. */ - if (par->chip == S3_SAVAGE_MX) { - int i; - - for (i = 0; i < 8; i++) { - vga_out8 (0x3c4, 0x54+i); - par->SR54[i] = vga_in8 (0x3c5); - } - } - - vga_out8 (0x3d4, 0x66); - cr66 = vga_in8 (0x3d5); - vga_out8 (0x3d5, cr66 | 0x80); - vga_out8 (0x3d4, 0x3a); - cr3a = vga_in8 (0x3d5); - vga_out8 (0x3d5, cr3a | 0x80); - - /* now save MIU regs */ - if (par->chip != S3_SAVAGE_MX) { - par->MMPR0 = savage_in32(FIFO_CONTROL_REG); - par->MMPR1 = savage_in32(MIU_CONTROL_REG); - par->MMPR2 = savage_in32(STREAMS_TIMEOUT_REG); - par->MMPR3 = savage_in32(MISC_TIMEOUT_REG); - } - - vga_out8 (0x3d4, 0x3a); - vga_out8 (0x3d5, cr3a); - vga_out8 (0x3d4, 0x66); - vga_out8 (0x3d5, cr66); -} - -static void savage_update_var(struct fb_var_screeninfo *var, struct fb_videomode *modedb) -{ - var->xres = var->xres_virtual = modedb->xres; - var->yres = modedb->yres; - if (var->yres_virtual < var->yres) - var->yres_virtual = var->yres; - var->xoffset = var->yoffset = 0; - var->pixclock = modedb->pixclock; - var->left_margin = modedb->left_margin; - var->right_margin = modedb->right_margin; - var->upper_margin = modedb->upper_margin; - var->lower_margin = modedb->lower_margin; - var->hsync_len = modedb->hsync_len; - var->vsync_len = modedb->vsync_len; - var->sync = modedb->sync; - var->vmode = modedb->vmode; -} - -static int savagefb_check_var (struct fb_var_screeninfo *var, - struct fb_info *info) -{ - struct savagefb_par *par = (struct savagefb_par *)info->par; - int memlen, vramlen, mode_valid = 0; - - DBG("savagefb_check_var"); - - var->transp.offset = 0; - var->transp.length = 0; - switch (var->bits_per_pixel) { - case 8: - var->red.offset = var->green.offset = - var->blue.offset = 0; - var->red.length = var->green.length = - var->blue.length = var->bits_per_pixel; - break; - case 16: - var->red.offset = 11; - var->red.length = 5; - var->green.offset = 5; - var->green.length = 6; - var->blue.offset = 0; - var->blue.length = 5; - break; - case 32: - var->transp.offset = 24; - var->transp.length = 8; - var->red.offset = 16; - var->red.length = 8; - var->green.offset = 8; - var->green.length = 8; - var->blue.offset = 0; - var->blue.length = 8; - break; - - default: - return -EINVAL; - } - - if (!info->monspecs.hfmax || !info->monspecs.vfmax || - !info->monspecs.dclkmax || !fb_validate_mode(var, info)) - mode_valid = 1; - - /* calculate modeline if supported by monitor */ - if (!mode_valid && info->monspecs.gtf) { - if (!fb_get_mode(FB_MAXTIMINGS, 0, var, info)) - mode_valid = 1; - } - - if (!mode_valid) { - struct fb_videomode *mode; - - mode = fb_find_best_mode(var, &info->modelist); - if (mode) { - savage_update_var(var, mode); - mode_valid = 1; - } - } - - if (!mode_valid && info->monspecs.modedb_len) - return -EINVAL; - - /* Is the mode larger than the LCD panel? */ - if (par->SavagePanelWidth && - (var->xres > par->SavagePanelWidth || - var->yres > par->SavagePanelHeight)) { - printk (KERN_INFO "Mode (%dx%d) larger than the LCD panel " - "(%dx%d)\n", var->xres, var->yres, - par->SavagePanelWidth, - par->SavagePanelHeight); - return -1; - } - - if (var->yres_virtual < var->yres) - var->yres_virtual = var->yres; - if (var->xres_virtual < var->xres) - var->xres_virtual = var->xres; - - vramlen = info->fix.smem_len; - - memlen = var->xres_virtual * var->bits_per_pixel * - var->yres_virtual / 8; - if (memlen > vramlen) { - var->yres_virtual = vramlen * 8 / - (var->xres_virtual * var->bits_per_pixel); - memlen = var->xres_virtual * var->bits_per_pixel * - var->yres_virtual / 8; - } - - /* we must round yres/xres down, we already rounded y/xres_virtual up - if it was possible. We should return -EINVAL, but I disagree */ - if (var->yres_virtual < var->yres) - var->yres = var->yres_virtual; - if (var->xres_virtual < var->xres) - var->xres = var->xres_virtual; - if (var->xoffset + var->xres > var->xres_virtual) - var->xoffset = var->xres_virtual - var->xres; - if (var->yoffset + var->yres > var->yres_virtual) - var->yoffset = var->yres_virtual - var->yres; - - return 0; -} - - -static int savagefb_decode_var (struct fb_var_screeninfo *var, - struct savagefb_par *par) -{ - struct xtimings timings; - int width, dclk, i, j; /*, refresh; */ - unsigned int m, n, r; - unsigned char tmp = 0; - unsigned int pixclock = var->pixclock; - - DBG("savagefb_decode_var"); - - memset (&timings, 0, sizeof(timings)); - - if (!pixclock) pixclock = 10000; /* 10ns = 100MHz */ - timings.Clock = 1000000000 / pixclock; - if (timings.Clock < 1) timings.Clock = 1; - timings.dblscan = var->vmode & FB_VMODE_DOUBLE; - timings.interlaced = var->vmode & FB_VMODE_INTERLACED; - timings.HDisplay = var->xres; - timings.HSyncStart = timings.HDisplay + var->right_margin; - timings.HSyncEnd = timings.HSyncStart + var->hsync_len; - timings.HTotal = timings.HSyncEnd + var->left_margin; - timings.VDisplay = var->yres; - timings.VSyncStart = timings.VDisplay + var->lower_margin; - timings.VSyncEnd = timings.VSyncStart + var->vsync_len; - timings.VTotal = timings.VSyncEnd + var->upper_margin; - timings.sync = var->sync; - - - par->depth = var->bits_per_pixel; - par->vwidth = var->xres_virtual; - - if (var->bits_per_pixel == 16 && par->chip == S3_SAVAGE3D) { - timings.HDisplay *= 2; - timings.HSyncStart *= 2; - timings.HSyncEnd *= 2; - timings.HTotal *= 2; - } - - /* - * This will allocate the datastructure and initialize all of the - * generic VGA registers. - */ - vgaHWInit (var, par, &timings); - - /* We need to set CR67 whether or not we use the BIOS. */ - - dclk = timings.Clock; - par->CR67 = 0x00; - - switch( var->bits_per_pixel ) { - case 8: - if( (par->chip == S3_SAVAGE2000) && (dclk >= 230000) ) - par->CR67 = 0x10; /* 8bpp, 2 pixels/clock */ - else - par->CR67 = 0x00; /* 8bpp, 1 pixel/clock */ - break; - case 15: - if ( S3_SAVAGE_MOBILE_SERIES(par->chip) || - ((par->chip == S3_SAVAGE2000) && (dclk >= 230000)) ) - par->CR67 = 0x30; /* 15bpp, 2 pixel/clock */ - else - par->CR67 = 0x20; /* 15bpp, 1 pixels/clock */ - break; - case 16: - if( S3_SAVAGE_MOBILE_SERIES(par->chip) || - ((par->chip == S3_SAVAGE2000) && (dclk >= 230000)) ) - par->CR67 = 0x50; /* 16bpp, 2 pixel/clock */ - else - par->CR67 = 0x40; /* 16bpp, 1 pixels/clock */ - break; - case 24: - par->CR67 = 0x70; - break; - case 32: - par->CR67 = 0xd0; - break; - } - - /* - * Either BIOS use is disabled, or we failed to find a suitable - * match. Fall back to traditional register-crunching. - */ - - vga_out8 (0x3d4, 0x3a); - tmp = vga_in8 (0x3d5); - if (1 /*FIXME:psav->pci_burst*/) - par->CR3A = (tmp & 0x7f) | 0x15; - else - par->CR3A = tmp | 0x95; - - par->CR53 = 0x00; - par->CR31 = 0x8c; - par->CR66 = 0x89; - - vga_out8 (0x3d4, 0x58); - par->CR58 = vga_in8 (0x3d5) & 0x80; - par->CR58 |= 0x13; - - par->SR15 = 0x03 | 0x80; - par->SR18 = 0x00; - par->CR43 = par->CR45 = par->CR65 = 0x00; - - vga_out8 (0x3d4, 0x40); - par->CR40 = vga_in8 (0x3d5) & ~0x01; - - par->MMPR0 = 0x010400; - par->MMPR1 = 0x00; - par->MMPR2 = 0x0808; - par->MMPR3 = 0x08080810; - - SavageCalcClock (dclk, 1, 1, 127, 0, 4, 180000, 360000, &m, &n, &r); - /* m = 107; n = 4; r = 2; */ - - if (par->MCLK <= 0) { - par->SR10 = 255; - par->SR11 = 255; - } else { - common_calc_clock (par->MCLK, 1, 1, 31, 0, 3, 135000, 270000, - &par->SR11, &par->SR10); - /* par->SR10 = 80; // MCLK == 286000 */ - /* par->SR11 = 125; */ - } - - par->SR12 = (r << 6) | (n & 0x3f); - par->SR13 = m & 0xff; - par->SR29 = (r & 4) | (m & 0x100) >> 5 | (n & 0x40) >> 2; - - if (var->bits_per_pixel < 24) - par->MMPR0 -= 0x8000; - else - par->MMPR0 -= 0x4000; - - if (timings.interlaced) - par->CR42 = 0x20; - else - par->CR42 = 0x00; - - par->CR34 = 0x10; /* display fifo */ - - i = ((((timings.HTotal >> 3) - 5) & 0x100) >> 8) | - ((((timings.HDisplay >> 3) - 1) & 0x100) >> 7) | - ((((timings.HSyncStart >> 3) - 1) & 0x100) >> 6) | - ((timings.HSyncStart & 0x800) >> 7); - - if ((timings.HSyncEnd >> 3) - (timings.HSyncStart >> 3) > 64) - i |= 0x08; - if ((timings.HSyncEnd >> 3) - (timings.HSyncStart >> 3) > 32) - i |= 0x20; - - j = (par->CRTC[0] + ((i & 0x01) << 8) + - par->CRTC[4] + ((i & 0x10) << 4) + 1) / 2; - - if (j - (par->CRTC[4] + ((i & 0x10) << 4)) < 4) { - if (par->CRTC[4] + ((i & 0x10) << 4) + 4 <= - par->CRTC[0] + ((i & 0x01) << 8)) - j = par->CRTC[4] + ((i & 0x10) << 4) + 4; - else - j = par->CRTC[0] + ((i & 0x01) << 8) + 1; - } - - par->CR3B = j & 0xff; - i |= (j & 0x100) >> 2; - par->CR3C = (par->CRTC[0] + ((i & 0x01) << 8)) / 2; - par->CR5D = i; - par->CR5E = (((timings.VTotal - 2) & 0x400) >> 10) | - (((timings.VDisplay - 1) & 0x400) >> 9) | - (((timings.VSyncStart) & 0x400) >> 8) | - (((timings.VSyncStart) & 0x400) >> 6) | 0x40; - width = (var->xres_virtual * ((var->bits_per_pixel+7) / 8)) >> 3; - par->CR91 = par->CRTC[19] = 0xff & width; - par->CR51 = (0x300 & width) >> 4; - par->CR90 = 0x80 | (width >> 8); - par->MiscOutReg |= 0x0c; - - /* Set frame buffer description. */ - - if (var->bits_per_pixel <= 8) - par->CR50 = 0; - else if (var->bits_per_pixel <= 16) - par->CR50 = 0x10; - else - par->CR50 = 0x30; - - if (var->xres_virtual <= 640) - par->CR50 |= 0x40; - else if (var->xres_virtual == 800) - par->CR50 |= 0x80; - else if (var->xres_virtual == 1024) - par->CR50 |= 0x00; - else if (var->xres_virtual == 1152) - par->CR50 |= 0x01; - else if (var->xres_virtual == 1280) - par->CR50 |= 0xc0; - else if (var->xres_virtual == 1600) - par->CR50 |= 0x81; - else - par->CR50 |= 0xc1; /* Use GBD */ - - if( par->chip == S3_SAVAGE2000 ) - par->CR33 = 0x08; - else - par->CR33 = 0x20; - - par->CRTC[0x17] = 0xeb; - - par->CR67 |= 1; - - vga_out8(0x3d4, 0x36); - par->CR36 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x68); - par->CR68 = vga_in8 (0x3d5); - par->CR69 = 0; - vga_out8 (0x3d4, 0x6f); - par->CR6F = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x86); - par->CR86 = vga_in8 (0x3d5); - vga_out8 (0x3d4, 0x88); - par->CR88 = vga_in8 (0x3d5) | 0x08; - vga_out8 (0x3d4, 0xb0); - par->CRB0 = vga_in8 (0x3d5) | 0x80; - - return 0; -} - -/* --------------------------------------------------------------------- */ - -/* - * Set a single color register. Return != 0 for invalid regno. - */ -static int savagefb_setcolreg(unsigned regno, - unsigned red, - unsigned green, - unsigned blue, - unsigned transp, - struct fb_info *info) -{ - struct savagefb_par *par = (struct savagefb_par *)info->par; - - if (regno >= NR_PALETTE) - return -EINVAL; - - par->palette[regno].red = red; - par->palette[regno].green = green; - par->palette[regno].blue = blue; - par->palette[regno].transp = transp; - - switch (info->var.bits_per_pixel) { - case 8: - vga_out8 (0x3c8, regno); - - vga_out8 (0x3c9, red >> 10); - vga_out8 (0x3c9, green >> 10); - vga_out8 (0x3c9, blue >> 10); - break; - - case 16: - if (regno < 16) - ((u32 *)info->pseudo_palette)[regno] = - ((red & 0xf800) ) | - ((green & 0xfc00) >> 5) | - ((blue & 0xf800) >> 11); - break; - - case 24: - if (regno < 16) - ((u32 *)info->pseudo_palette)[regno] = - ((red & 0xff00) << 8) | - ((green & 0xff00) ) | - ((blue & 0xff00) >> 8); - break; - case 32: - if (regno < 16) - ((u32 *)info->pseudo_palette)[regno] = - ((transp & 0xff00) << 16) | - ((red & 0xff00) << 8) | - ((green & 0xff00) ) | - ((blue & 0xff00) >> 8); - break; - - default: - return 1; - } - - return 0; -} - -static void savagefb_set_par_int (struct savagefb_par *par) -{ - unsigned char tmp, cr3a, cr66, cr67; - - DBG ("savagefb_set_par_int"); - - par->SavageWaitIdle (par); - - vga_out8 (0x3c2, 0x23); - - vga_out16 (0x3d4, 0x4838); - vga_out16 (0x3d4, 0xa539); - vga_out16 (0x3c4, 0x0608); - - vgaHWProtect (par, 1); - - /* - * Some Savage/MX and /IX systems go nuts when trying to exit the - * server after WindowMaker has displayed a gradient background. I - * haven't been able to find what causes it, but a non-destructive - * switch to mode 3 here seems to eliminate the issue. - */ - - VerticalRetraceWait(); - vga_out8 (0x3d4, 0x67); - cr67 = vga_in8 (0x3d5); - vga_out8 (0x3d5, cr67/*par->CR67*/ & ~0x0c); /* no STREAMS yet */ - - vga_out8 (0x3d4, 0x23); - vga_out8 (0x3d5, 0x00); - vga_out8 (0x3d4, 0x26); - vga_out8 (0x3d5, 0x00); - - /* restore extended regs */ - vga_out8 (0x3d4, 0x66); - vga_out8 (0x3d5, par->CR66); - vga_out8 (0x3d4, 0x3a); - vga_out8 (0x3d5, par->CR3A); - vga_out8 (0x3d4, 0x31); - vga_out8 (0x3d5, par->CR31); - vga_out8 (0x3d4, 0x32); - vga_out8 (0x3d5, par->CR32); - vga_out8 (0x3d4, 0x58); - vga_out8 (0x3d5, par->CR58); - vga_out8 (0x3d4, 0x53); - vga_out8 (0x3d5, par->CR53 & 0x7f); - - vga_out16 (0x3c4, 0x0608); - - /* Restore DCLK registers. */ - - vga_out8 (0x3c4, 0x0e); - vga_out8 (0x3c5, par->SR0E); - vga_out8 (0x3c4, 0x0f); - vga_out8 (0x3c5, par->SR0F); - vga_out8 (0x3c4, 0x29); - vga_out8 (0x3c5, par->SR29); - vga_out8 (0x3c4, 0x15); - vga_out8 (0x3c5, par->SR15); - - /* Restore flat panel expansion regsters. */ - if( par->chip == S3_SAVAGE_MX ) { - int i; - - for( i = 0; i < 8; i++ ) { - vga_out8 (0x3c4, 0x54+i); - vga_out8 (0x3c5, par->SR54[i]); - } - } - - vgaHWRestore (par); - - /* extended mode timing registers */ - vga_out8 (0x3d4, 0x53); - vga_out8 (0x3d5, par->CR53); - vga_out8 (0x3d4, 0x5d); - vga_out8 (0x3d5, par->CR5D); - vga_out8 (0x3d4, 0x5e); - vga_out8 (0x3d5, par->CR5E); - vga_out8 (0x3d4, 0x3b); - vga_out8 (0x3d5, par->CR3B); - vga_out8 (0x3d4, 0x3c); - vga_out8 (0x3d5, par->CR3C); - vga_out8 (0x3d4, 0x43); - vga_out8 (0x3d5, par->CR43); - vga_out8 (0x3d4, 0x65); - vga_out8 (0x3d5, par->CR65); - - /* restore the desired video mode with cr67 */ - vga_out8 (0x3d4, 0x67); - /* following part not present in X11 driver */ - cr67 = vga_in8 (0x3d5) & 0xf; - vga_out8 (0x3d5, 0x50 | cr67); - udelay (10000); - vga_out8 (0x3d4, 0x67); - /* end of part */ - vga_out8 (0x3d5, par->CR67 & ~0x0c); - - /* other mode timing and extended regs */ - vga_out8 (0x3d4, 0x34); - vga_out8 (0x3d5, par->CR34); - vga_out8 (0x3d4, 0x40); - vga_out8 (0x3d5, par->CR40); - vga_out8 (0x3d4, 0x42); - vga_out8 (0x3d5, par->CR42); - vga_out8 (0x3d4, 0x45); - vga_out8 (0x3d5, par->CR45); - vga_out8 (0x3d4, 0x50); - vga_out8 (0x3d5, par->CR50); - vga_out8 (0x3d4, 0x51); - vga_out8 (0x3d5, par->CR51); - - /* memory timings */ - vga_out8 (0x3d4, 0x36); - vga_out8 (0x3d5, par->CR36); - vga_out8 (0x3d4, 0x60); - vga_out8 (0x3d5, par->CR60); - vga_out8 (0x3d4, 0x68); - vga_out8 (0x3d5, par->CR68); - vga_out8 (0x3d4, 0x69); - vga_out8 (0x3d5, par->CR69); - vga_out8 (0x3d4, 0x6f); - vga_out8 (0x3d5, par->CR6F); - - vga_out8 (0x3d4, 0x33); - vga_out8 (0x3d5, par->CR33); - vga_out8 (0x3d4, 0x86); - vga_out8 (0x3d5, par->CR86); - vga_out8 (0x3d4, 0x88); - vga_out8 (0x3d5, par->CR88); - vga_out8 (0x3d4, 0x90); - vga_out8 (0x3d5, par->CR90); - vga_out8 (0x3d4, 0x91); - vga_out8 (0x3d5, par->CR91); - - if (par->chip == S3_SAVAGE4) { - vga_out8 (0x3d4, 0xb0); - vga_out8 (0x3d5, par->CRB0); - } - - vga_out8 (0x3d4, 0x32); - vga_out8 (0x3d5, par->CR32); - - /* unlock extended seq regs */ - vga_out8 (0x3c4, 0x08); - vga_out8 (0x3c5, 0x06); - - /* Restore extended sequencer regs for MCLK. SR10 == 255 indicates - * that we should leave the default SR10 and SR11 values there. - */ - if (par->SR10 != 255) { - vga_out8 (0x3c4, 0x10); - vga_out8 (0x3c5, par->SR10); - vga_out8 (0x3c4, 0x11); - vga_out8 (0x3c5, par->SR11); - } - - /* restore extended seq regs for dclk */ - vga_out8 (0x3c4, 0x0e); - vga_out8 (0x3c5, par->SR0E); - vga_out8 (0x3c4, 0x0f); - vga_out8 (0x3c5, par->SR0F); - vga_out8 (0x3c4, 0x12); - vga_out8 (0x3c5, par->SR12); - vga_out8 (0x3c4, 0x13); - vga_out8 (0x3c5, par->SR13); - vga_out8 (0x3c4, 0x29); - vga_out8 (0x3c5, par->SR29); - - vga_out8 (0x3c4, 0x18); - vga_out8 (0x3c5, par->SR18); - - /* load new m, n pll values for dclk & mclk */ - vga_out8 (0x3c4, 0x15); - tmp = vga_in8 (0x3c5) & ~0x21; - - vga_out8 (0x3c5, tmp | 0x03); - vga_out8 (0x3c5, tmp | 0x23); - vga_out8 (0x3c5, tmp | 0x03); - vga_out8 (0x3c5, par->SR15); - udelay (100); - - vga_out8 (0x3c4, 0x30); - vga_out8 (0x3c5, par->SR30); - vga_out8 (0x3c4, 0x08); - vga_out8 (0x3c5, par->SR08); - - /* now write out cr67 in full, possibly starting STREAMS */ - VerticalRetraceWait(); - vga_out8 (0x3d4, 0x67); - vga_out8 (0x3d5, par->CR67); - - vga_out8 (0x3d4, 0x66); - cr66 = vga_in8 (0x3d5); - vga_out8 (0x3d5, cr66 | 0x80); - vga_out8 (0x3d4, 0x3a); - cr3a = vga_in8 (0x3d5); - vga_out8 (0x3d5, cr3a | 0x80); - - if (par->chip != S3_SAVAGE_MX) { - VerticalRetraceWait(); - savage_out32 (FIFO_CONTROL_REG, par->MMPR0); - par->SavageWaitIdle (par); - savage_out32 (MIU_CONTROL_REG, par->MMPR1); - par->SavageWaitIdle (par); - savage_out32 (STREAMS_TIMEOUT_REG, par->MMPR2); - par->SavageWaitIdle (par); - savage_out32 (MISC_TIMEOUT_REG, par->MMPR3); - } - - vga_out8 (0x3d4, 0x66); - vga_out8 (0x3d5, cr66); - vga_out8 (0x3d4, 0x3a); - vga_out8 (0x3d5, cr3a); - - SavageSetup2DEngine (par); - vgaHWProtect (par, 0); -} - -static void savagefb_update_start (struct savagefb_par *par, - struct fb_var_screeninfo *var) -{ - int base; - - base = ((var->yoffset * var->xres_virtual + (var->xoffset & ~1)) - * ((var->bits_per_pixel+7) / 8)) >> 2; - - /* now program the start address registers */ - vga_out16(0x3d4, (base & 0x00ff00) | 0x0c); - vga_out16(0x3d4, ((base & 0x00ff) << 8) | 0x0d); - vga_out8 (0x3d4, 0x69); - vga_out8 (0x3d5, (base & 0x7f0000) >> 16); -} - - -static void savagefb_set_fix(struct fb_info *info) -{ - info->fix.line_length = info->var.xres_virtual * - info->var.bits_per_pixel / 8; - - if (info->var.bits_per_pixel == 8) - info->fix.visual = FB_VISUAL_PSEUDOCOLOR; - else - info->fix.visual = FB_VISUAL_TRUECOLOR; -} - -#if defined(CONFIG_FB_SAVAGE_ACCEL) -static void savagefb_set_clip(struct fb_info *info) -{ - struct savagefb_par *par = (struct savagefb_par *)info->par; - int cmd; - - cmd = BCI_CMD_NOP | BCI_CMD_CLIP_NEW; - par->bci_ptr = 0; - par->SavageWaitFifo(par,3); - BCI_SEND(cmd); - BCI_SEND(BCI_CLIP_TL(0, 0)); - BCI_SEND(BCI_CLIP_BR(0xfff, 0xfff)); -} -#endif - -static int savagefb_set_par (struct fb_info *info) -{ - struct savagefb_par *par = (struct savagefb_par *)info->par; - struct fb_var_screeninfo *var = &info->var; - int err; - - DBG("savagefb_set_par"); - err = savagefb_decode_var (var, par); - if (err) - return err; - - if (par->dacSpeedBpp <= 0) { - if (var->bits_per_pixel > 24) - par->dacSpeedBpp = par->clock[3]; - else if (var->bits_per_pixel >= 24) - par->dacSpeedBpp = par->clock[2]; - else if ((var->bits_per_pixel > 8) && (var->bits_per_pixel < 24)) - par->dacSpeedBpp = par->clock[1]; - else if (var->bits_per_pixel <= 8) - par->dacSpeedBpp = par->clock[0]; - } - - /* Set ramdac limits */ - par->maxClock = par->dacSpeedBpp; - par->minClock = 10000; - - savagefb_set_par_int (par); - savagefb_update_start (par, var); - fb_set_cmap (&info->cmap, info); - savagefb_set_fix(info); - savagefb_set_clip(info); - - SavagePrintRegs(); - return 0; -} - -/* - * Pan or Wrap the Display - */ -static int savagefb_pan_display (struct fb_var_screeninfo *var, - struct fb_info *info) -{ - struct savagefb_par *par = (struct savagefb_par *)info->par; - u_int y_bottom; - - y_bottom = var->yoffset; - - if (!(var->vmode & FB_VMODE_YWRAP)) - y_bottom += var->yres; - - if (var->xoffset > (var->xres_virtual - var->xres)) - return -EINVAL; - if (y_bottom > info->var.yres_virtual) - return -EINVAL; - - savagefb_update_start (par, var); - - info->var.xoffset = var->xoffset; - info->var.yoffset = var->yoffset; - - if (var->vmode & FB_VMODE_YWRAP) - info->var.vmode |= FB_VMODE_YWRAP; - else - info->var.vmode &= ~FB_VMODE_YWRAP; - - return 0; -} - - -static struct fb_ops savagefb_ops = { - .owner = THIS_MODULE, - .fb_check_var = savagefb_check_var, - .fb_set_par = savagefb_set_par, - .fb_setcolreg = savagefb_setcolreg, - .fb_pan_display = savagefb_pan_display, -#if defined(CONFIG_FB_SAVAGE_ACCEL) - .fb_fillrect = savagefb_fillrect, - .fb_copyarea = savagefb_copyarea, - .fb_imageblit = savagefb_imageblit, - .fb_sync = savagefb_sync, -#else - .fb_fillrect = cfb_fillrect, - .fb_copyarea = cfb_copyarea, - .fb_imageblit = cfb_imageblit, -#endif - .fb_cursor = soft_cursor, -}; - -/* --------------------------------------------------------------------- */ - -static struct fb_var_screeninfo __devinitdata savagefb_var800x600x8 = { - .accel_flags = FB_ACCELF_TEXT, - .xres = 800, - .yres = 600, - .xres_virtual = 800, - .yres_virtual = 600, - .bits_per_pixel = 8, - .pixclock = 25000, - .left_margin = 88, - .right_margin = 40, - .upper_margin = 23, - .lower_margin = 1, - .hsync_len = 128, - .vsync_len = 4, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED -}; - -static void savage_enable_mmio (struct savagefb_par *par) -{ - unsigned char val; - - DBG ("savage_enable_mmio\n"); - - val = vga_in8 (0x3c3); - vga_out8 (0x3c3, val | 0x01); - val = vga_in8 (0x3cc); - vga_out8 (0x3c2, val | 0x01); - - if (par->chip >= S3_SAVAGE4) { - vga_out8 (0x3d4, 0x40); - val = vga_in8 (0x3d5); - vga_out8 (0x3d5, val | 1); - } -} - - -void savage_disable_mmio (struct savagefb_par *par) -{ - unsigned char val; - - DBG ("savage_disable_mmio\n"); - - if(par->chip >= S3_SAVAGE4 ) { - vga_out8 (0x3d4, 0x40); - val = vga_in8 (0x3d5); - vga_out8 (0x3d5, val | 1); - } -} - - -static int __devinit savage_map_mmio (struct fb_info *info) -{ - struct savagefb_par *par = (struct savagefb_par *)info->par; - DBG ("savage_map_mmio"); - - if (S3_SAVAGE3D_SERIES (par->chip)) - par->mmio.pbase = pci_resource_start (par->pcidev, 0) + - SAVAGE_NEWMMIO_REGBASE_S3; - else - par->mmio.pbase = pci_resource_start (par->pcidev, 0) + - SAVAGE_NEWMMIO_REGBASE_S4; - - par->mmio.len = SAVAGE_NEWMMIO_REGSIZE; - - par->mmio.vbase = ioremap (par->mmio.pbase, par->mmio.len); - if (!par->mmio.vbase) { - printk ("savagefb: unable to map memory mapped IO\n"); - return -ENOMEM; - } else - printk (KERN_INFO "savagefb: mapped io at %p\n", - par->mmio.vbase); - - info->fix.mmio_start = par->mmio.pbase; - info->fix.mmio_len = par->mmio.len; - - par->bci_base = (u32 __iomem *)(par->mmio.vbase + BCI_BUFFER_OFFSET); - par->bci_ptr = 0; - - savage_enable_mmio (par); - - return 0; -} - -static void __devinit savage_unmap_mmio (struct fb_info *info) -{ - struct savagefb_par *par = (struct savagefb_par *)info->par; - DBG ("savage_unmap_mmio"); - - savage_disable_mmio(par); - - if (par->mmio.vbase) { - iounmap ((void __iomem *)par->mmio.vbase); - par->mmio.vbase = NULL; - } -} - -static int __devinit savage_map_video (struct fb_info *info, - int video_len) -{ - struct savagefb_par *par = (struct savagefb_par *)info->par; - int resource; - - DBG("savage_map_video"); - - if (S3_SAVAGE3D_SERIES (par->chip)) - resource = 0; - else - resource = 1; - - par->video.pbase = pci_resource_start (par->pcidev, resource); - par->video.len = video_len; - par->video.vbase = ioremap (par->video.pbase, par->video.len); - - if (!par->video.vbase) { - printk ("savagefb: unable to map screen memory\n"); - return -ENOMEM; - } else - printk (KERN_INFO "savagefb: mapped framebuffer at %p, " - "pbase == %x\n", par->video.vbase, par->video.pbase); - - info->fix.smem_start = par->video.pbase; - info->fix.smem_len = par->video.len - par->cob_size; - info->screen_base = par->video.vbase; - -#ifdef CONFIG_MTRR - par->video.mtrr = mtrr_add (par->video.pbase, video_len, - MTRR_TYPE_WRCOMB, 1); -#endif - return 0; -} - -static void __devinit savage_unmap_video (struct fb_info *info) -{ - struct savagefb_par *par = (struct savagefb_par *)info->par; - - DBG("savage_unmap_video"); - - if (par->video.vbase) { -#ifdef CONFIG_MTRR - mtrr_del (par->video.mtrr, par->video.pbase, par->video.len); -#endif - - iounmap (par->video.vbase); - par->video.vbase = NULL; - info->screen_base = NULL; - } -} - -static int __devinit savage_init_hw (struct savagefb_par *par) -{ - unsigned char config1, m, n, n1, n2, sr8, cr3f, cr66 = 0, tmp; - - static unsigned char RamSavage3D[] = { 8, 4, 4, 2 }; - static unsigned char RamSavage4[] = { 2, 4, 8, 12, 16, 32, 64, 32 }; - static unsigned char RamSavageMX[] = { 2, 8, 4, 16, 8, 16, 4, 16 }; - static unsigned char RamSavageNB[] = { 0, 2, 4, 8, 16, 32, 2, 2 }; - - int videoRam, videoRambytes; - - DBG("savage_init_hw"); - - /* unprotect CRTC[0-7] */ - vga_out8(0x3d4, 0x11); - tmp = vga_in8(0x3d5); - vga_out8(0x3d5, tmp & 0x7f); - - /* unlock extended regs */ - vga_out16(0x3d4, 0x4838); - vga_out16(0x3d4, 0xa039); - vga_out16(0x3c4, 0x0608); - - vga_out8(0x3d4, 0x40); - tmp = vga_in8(0x3d5); - vga_out8(0x3d5, tmp & ~0x01); - - /* unlock sys regs */ - vga_out8(0x3d4, 0x38); - vga_out8(0x3d5, 0x48); - - /* Unlock system registers. */ - vga_out16(0x3d4, 0x4838); - - /* Next go on to detect amount of installed ram */ - - vga_out8(0x3d4, 0x36); /* for register CR36 (CONFG_REG1), */ - config1 = vga_in8(0x3d5); /* get amount of vram installed */ - - /* Compute the amount of video memory and offscreen memory. */ - - switch (par->chip) { - case S3_SAVAGE3D: - videoRam = RamSavage3D[ (config1 & 0xC0) >> 6 ] * 1024; - break; - - case S3_SAVAGE4: - /* - * The Savage4 has one ugly special case to consider. On - * systems with 4 banks of 2Mx32 SDRAM, the BIOS says 4MB - * when it really means 8MB. Why do it the same when you - * can do it different... - */ - vga_out8(0x3d4, 0x68); /* memory control 1 */ - if( (vga_in8(0x3d5) & 0xC0) == (0x01 << 6) ) - RamSavage4[1] = 8; - - /*FALLTHROUGH*/ - - case S3_SAVAGE2000: - videoRam = RamSavage4[ (config1 & 0xE0) >> 5 ] * 1024; - break; - - case S3_SAVAGE_MX: - case S3_SUPERSAVAGE: - videoRam = RamSavageMX[ (config1 & 0x0E) >> 1 ] * 1024; - break; - - case S3_PROSAVAGE: - videoRam = RamSavageNB[ (config1 & 0xE0) >> 5 ] * 1024; - break; - - default: - /* How did we get here? */ - videoRam = 0; - break; - } - - videoRambytes = videoRam * 1024; - - printk (KERN_INFO "savagefb: probed videoram: %dk\n", videoRam); - - /* reset graphics engine to avoid memory corruption */ - vga_out8 (0x3d4, 0x66); - cr66 = vga_in8 (0x3d5); - vga_out8 (0x3d5, cr66 | 0x02); - udelay (10000); - - vga_out8 (0x3d4, 0x66); - vga_out8 (0x3d5, cr66 & ~0x02); /* clear reset flag */ - udelay (10000); - - - /* - * reset memory interface, 3D engine, AGP master, PCI master, - * master engine unit, motion compensation/LPB - */ - vga_out8 (0x3d4, 0x3f); - cr3f = vga_in8 (0x3d5); - vga_out8 (0x3d5, cr3f | 0x08); - udelay (10000); - - vga_out8 (0x3d4, 0x3f); - vga_out8 (0x3d5, cr3f & ~0x08); /* clear reset flags */ - udelay (10000); - - /* Savage ramdac speeds */ - par->numClocks = 4; - par->clock[0] = 250000; - par->clock[1] = 250000; - par->clock[2] = 220000; - par->clock[3] = 220000; - - /* detect current mclk */ - vga_out8(0x3c4, 0x08); - sr8 = vga_in8(0x3c5); - vga_out8(0x3c5, 0x06); - vga_out8(0x3c4, 0x10); - n = vga_in8(0x3c5); - vga_out8(0x3c4, 0x11); - m = vga_in8(0x3c5); - vga_out8(0x3c4, 0x08); - vga_out8(0x3c5, sr8); - m &= 0x7f; - n1 = n & 0x1f; - n2 = (n >> 5) & 0x03; - par->MCLK = ((1431818 * (m+2)) / (n1+2) / (1 << n2) + 50) / 100; - printk (KERN_INFO "savagefb: Detected current MCLK value of %d kHz\n", - par->MCLK); - - /* Check LCD panel parrmation */ - - if (par->chip == S3_SAVAGE_MX) { - unsigned char cr6b = VGArCR( 0x6b ); - - int panelX = (VGArSEQ (0x61) + - ((VGArSEQ (0x66) & 0x02) << 7) + 1) * 8; - int panelY = (VGArSEQ (0x69) + - ((VGArSEQ (0x6e) & 0x70) << 4) + 1); - - char * sTechnology = "Unknown"; - - /* OK, I admit it. I don't know how to limit the max dot clock - * for LCD panels of various sizes. I thought I copied the - * formula from the BIOS, but many users have parrmed me of - * my folly. - * - * Instead, I'll abandon any attempt to automatically limit the - * clock, and add an LCDClock option to XF86Config. Some day, - * I should come back to this. - */ - - enum ACTIVE_DISPLAYS { /* These are the bits in CR6B */ - ActiveCRT = 0x01, - ActiveLCD = 0x02, - ActiveTV = 0x04, - ActiveCRT2 = 0x20, - ActiveDUO = 0x80 - }; - - if ((VGArSEQ (0x39) & 0x03) == 0) { - sTechnology = "TFT"; - } else if ((VGArSEQ (0x30) & 0x01) == 0) { - sTechnology = "DSTN"; - } else { - sTechnology = "STN"; - } - - printk (KERN_INFO "savagefb: %dx%d %s LCD panel detected %s\n", - panelX, panelY, sTechnology, - cr6b & ActiveLCD ? "and active" : "but not active"); - - if( cr6b & ActiveLCD ) { - /* - * If the LCD is active and panel expansion is enabled, - * we probably want to kill the HW cursor. - */ - - printk (KERN_INFO "savagefb: Limiting video mode to " - "%dx%d\n", panelX, panelY ); - - par->SavagePanelWidth = panelX; - par->SavagePanelHeight = panelY; - - } - } - - savage_get_default_par (par); - - if( S3_SAVAGE4_SERIES(par->chip) ) { - /* - * The Savage4 and ProSavage have COB coherency bugs which - * render the buffer useless. We disable it. - */ - par->cob_index = 2; - par->cob_size = 0x8000 << par->cob_index; - par->cob_offset = videoRambytes; - } else { - /* We use 128kB for the COB on all chips. */ - - par->cob_index = 7; - par->cob_size = 0x400 << par->cob_index; - par->cob_offset = videoRambytes - par->cob_size; - } - - return videoRambytes; -} - -static int __devinit savage_init_fb_info (struct fb_info *info, - struct pci_dev *dev, - const struct pci_device_id *id) -{ - struct savagefb_par *par = (struct savagefb_par *)info->par; - int err = 0; - - par->pcidev = dev; - - info->fix.type = FB_TYPE_PACKED_PIXELS; - info->fix.type_aux = 0; - info->fix.xpanstep = 2; - info->fix.ypanstep = 1; - info->fix.ywrapstep = 0; - info->fix.accel = id->driver_data; - - switch (info->fix.accel) { - case FB_ACCEL_SUPERSAVAGE: - par->chip = S3_SUPERSAVAGE; - snprintf (info->fix.id, 16, "SuperSavage"); - break; - case FB_ACCEL_SAVAGE4: - par->chip = S3_SAVAGE4; - snprintf (info->fix.id, 16, "Savage4"); - break; - case FB_ACCEL_SAVAGE3D: - par->chip = S3_SAVAGE3D; - snprintf (info->fix.id, 16, "Savage3D"); - break; - case FB_ACCEL_SAVAGE3D_MV: - par->chip = S3_SAVAGE3D; - snprintf (info->fix.id, 16, "Savage3D-MV"); - break; - case FB_ACCEL_SAVAGE2000: - par->chip = S3_SAVAGE2000; - snprintf (info->fix.id, 16, "Savage2000"); - break; - case FB_ACCEL_SAVAGE_MX_MV: - par->chip = S3_SAVAGE_MX; - snprintf (info->fix.id, 16, "Savage/MX-MV"); - break; - case FB_ACCEL_SAVAGE_MX: - par->chip = S3_SAVAGE_MX; - snprintf (info->fix.id, 16, "Savage/MX"); - break; - case FB_ACCEL_SAVAGE_IX_MV: - par->chip = S3_SAVAGE_MX; - snprintf (info->fix.id, 16, "Savage/IX-MV"); - break; - case FB_ACCEL_SAVAGE_IX: - par->chip = S3_SAVAGE_MX; - snprintf (info->fix.id, 16, "Savage/IX"); - break; - case FB_ACCEL_PROSAVAGE_PM: - par->chip = S3_PROSAVAGE; - snprintf (info->fix.id, 16, "ProSavagePM"); - break; - case FB_ACCEL_PROSAVAGE_KM: - par->chip = S3_PROSAVAGE; - snprintf (info->fix.id, 16, "ProSavageKM"); - break; - case FB_ACCEL_S3TWISTER_P: - par->chip = S3_PROSAVAGE; - snprintf (info->fix.id, 16, "TwisterP"); - break; - case FB_ACCEL_S3TWISTER_K: - par->chip = S3_PROSAVAGE; - snprintf (info->fix.id, 16, "TwisterK"); - break; - case FB_ACCEL_PROSAVAGE_DDR: - par->chip = S3_PROSAVAGE; - snprintf (info->fix.id, 16, "ProSavageDDR"); - break; - case FB_ACCEL_PROSAVAGE_DDRK: - par->chip = S3_PROSAVAGE; - snprintf (info->fix.id, 16, "ProSavage8"); - break; - } - - if (S3_SAVAGE3D_SERIES(par->chip)) { - par->SavageWaitIdle = savage3D_waitidle; - par->SavageWaitFifo = savage3D_waitfifo; - } else if (S3_SAVAGE4_SERIES(par->chip) || - S3_SUPERSAVAGE == par->chip) { - par->SavageWaitIdle = savage4_waitidle; - par->SavageWaitFifo = savage4_waitfifo; - } else { - par->SavageWaitIdle = savage2000_waitidle; - par->SavageWaitFifo = savage2000_waitfifo; - } - - info->var.nonstd = 0; - info->var.activate = FB_ACTIVATE_NOW; - info->var.width = -1; - info->var.height = -1; - info->var.accel_flags = 0; - - info->fbops = &savagefb_ops; - info->flags = FBINFO_DEFAULT | - FBINFO_HWACCEL_YPAN | - FBINFO_HWACCEL_XPAN | - FBINFO_MISC_MODESWITCHLATE; - - info->pseudo_palette = par->pseudo_palette; - -#if defined(CONFIG_FB_SAVAGE_ACCEL) - /* FIFO size + padding for commands */ - info->pixmap.addr = kmalloc(8*1024, GFP_KERNEL); - - err = -ENOMEM; - if (info->pixmap.addr) { - memset(info->pixmap.addr, 0, 8*1024); - info->pixmap.size = 8*1024; - info->pixmap.scan_align = 4; - info->pixmap.buf_align = 4; - info->pixmap.access_align = 4; - - fb_alloc_cmap (&info->cmap, NR_PALETTE, 0); - info->flags |= FBINFO_HWACCEL_COPYAREA | - FBINFO_HWACCEL_FILLRECT | - FBINFO_HWACCEL_IMAGEBLIT; - - err = 0; - } -#endif - return err; -} - -/* --------------------------------------------------------------------- */ - -static int __devinit savagefb_probe (struct pci_dev* dev, - const struct pci_device_id* id) -{ - struct fb_info *info; - struct savagefb_par *par; - u_int h_sync, v_sync; - int err, lpitch; - int video_len; - - DBG("savagefb_probe"); - SavagePrintRegs(); - - info = framebuffer_alloc(sizeof(struct savagefb_par), &dev->dev); - if (!info) - return -ENOMEM; - par = info->par; - err = pci_enable_device(dev); - if (err) - goto failed_enable; - - if (pci_request_regions(dev, "savagefb")) { - printk(KERN_ERR "cannot request PCI regions\n"); - goto failed_enable; - } - - err = -ENOMEM; - - if (savage_init_fb_info(info, dev, id)) - goto failed_init; - - err = savage_map_mmio(info); - if (err) - goto failed_mmio; - - video_len = savage_init_hw(par); - if (video_len < 0) { - err = video_len; - goto failed_mmio; - } - - err = savage_map_video(info, video_len); - if (err) - goto failed_video; - - INIT_LIST_HEAD(&info->modelist); -#if defined(CONFIG_FB_SAVAGE_I2C) - savagefb_create_i2c_busses(info); - savagefb_probe_i2c_connector(par, &par->edid); - fb_edid_to_monspecs(par->edid, &info->monspecs); - fb_videomode_to_modelist(info->monspecs.modedb, - info->monspecs.modedb_len, - &info->modelist); -#endif - info->var = savagefb_var800x600x8; - - if (mode_option) { - fb_find_mode(&info->var, info, mode_option, - info->monspecs.modedb, info->monspecs.modedb_len, - NULL, 8); - } else if (info->monspecs.modedb != NULL) { - struct fb_monspecs *specs = &info->monspecs; - struct fb_videomode modedb; - - if (info->monspecs.misc & FB_MISC_1ST_DETAIL) { - int i; - - for (i = 0; i < specs->modedb_len; i++) { - if (specs->modedb[i].flag & FB_MODE_IS_FIRST) { - modedb = specs->modedb[i]; - break; - } - } - } else { - /* otherwise, get first mode in database */ - modedb = specs->modedb[0]; - } - - savage_update_var(&info->var, &modedb); - } - - /* maximize virtual vertical length */ - lpitch = info->var.xres_virtual*((info->var.bits_per_pixel + 7) >> 3); - info->var.yres_virtual = info->fix.smem_len/lpitch; - - if (info->var.yres_virtual < info->var.yres) - goto failed; - -#if defined(CONFIG_FB_SAVAGE_ACCEL) - /* - * The clipping coordinates are masked with 0xFFF, so limit our - * virtual resolutions to these sizes. - */ - if (info->var.yres_virtual > 0x1000) - info->var.yres_virtual = 0x1000; - - if (info->var.xres_virtual > 0x1000) - info->var.xres_virtual = 0x1000; -#endif - savagefb_check_var(&info->var, info); - savagefb_set_fix(info); - - /* - * Calculate the hsync and vsync frequencies. Note that - * we split the 1e12 constant up so that we can preserve - * the precision and fit the results into 32-bit registers. - * (1953125000 * 512 = 1e12) - */ - h_sync = 1953125000 / info->var.pixclock; - h_sync = h_sync * 512 / (info->var.xres + info->var.left_margin + - info->var.right_margin + - info->var.hsync_len); - v_sync = h_sync / (info->var.yres + info->var.upper_margin + - info->var.lower_margin + info->var.vsync_len); - - printk(KERN_INFO "savagefb v" SAVAGEFB_VERSION ": " - "%dkB VRAM, using %dx%d, %d.%03dkHz, %dHz\n", - info->fix.smem_len >> 10, - info->var.xres, info->var.yres, - h_sync / 1000, h_sync % 1000, v_sync); - - - fb_destroy_modedb(info->monspecs.modedb); - info->monspecs.modedb = NULL; - - err = register_framebuffer (info); - if (err < 0) - goto failed; - - printk (KERN_INFO "fb: S3 %s frame buffer device\n", - info->fix.id); - - /* - * Our driver data - */ - pci_set_drvdata(dev, info); - - return 0; - - failed: -#ifdef CONFIG_FB_SAVAGE_I2C - savagefb_delete_i2c_busses(info); -#endif - fb_alloc_cmap (&info->cmap, 0, 0); - savage_unmap_video(info); - failed_video: - savage_unmap_mmio (info); - failed_mmio: - kfree(info->pixmap.addr); - failed_init: - pci_release_regions(dev); - failed_enable: - framebuffer_release(info); - - return err; -} - -static void __devexit savagefb_remove (struct pci_dev *dev) -{ - struct fb_info *info = - (struct fb_info *)pci_get_drvdata(dev); - - DBG("savagefb_remove"); - - if (info) { - /* - * If unregister_framebuffer fails, then - * we will be leaving hooks that could cause - * oopsen laying around. - */ - if (unregister_framebuffer (info)) - printk (KERN_WARNING "savagefb: danger danger! " - "Oopsen imminent!\n"); - -#ifdef CONFIG_FB_SAVAGE_I2C - savagefb_delete_i2c_busses(info); -#endif - fb_alloc_cmap (&info->cmap, 0, 0); - savage_unmap_video (info); - savage_unmap_mmio (info); - kfree(info->pixmap.addr); - pci_release_regions(dev); - framebuffer_release(info); - - /* - * Ensure that the driver data is no longer - * valid. - */ - pci_set_drvdata(dev, NULL); - } -} - -static int savagefb_suspend (struct pci_dev* dev, u32 state) -{ - struct fb_info *info = - (struct fb_info *)pci_get_drvdata(dev); - struct savagefb_par *par = (struct savagefb_par *)info->par; - - DBG("savagefb_suspend"); - printk(KERN_DEBUG "state: %u\n", state); - - acquire_console_sem(); - fb_set_suspend(info, state); - savage_disable_mmio(par); - release_console_sem(); - - pci_disable_device(dev); - pci_set_power_state(dev, state); - - return 0; -} - -static int savagefb_resume (struct pci_dev* dev) -{ - struct fb_info *info = - (struct fb_info *)pci_get_drvdata(dev); - struct savagefb_par *par = (struct savagefb_par *)info->par; - - DBG("savage_resume"); - - pci_set_power_state(dev, 0); - pci_restore_state(dev); - if(pci_enable_device(dev)) - DBG("err"); - - SavagePrintRegs(); - - acquire_console_sem(); - - savage_enable_mmio(par); - savage_init_hw(par); - savagefb_set_par (info); - - fb_set_suspend (info, 0); - release_console_sem(); - - return 0; -} - - -static struct pci_device_id savagefb_devices[] __devinitdata = { - {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_MX128, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_MX64, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_MX64C, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IX128SDR, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IX128DDR, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IX64SDR, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IX64DDR, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IXCSDR, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IXCDDR, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE4, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE4}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE3D, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE3D}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE3D_MV, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE3D_MV}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE2000, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE2000}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE_MX_MV, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE_MX_MV}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE_MX, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE_MX}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE_IX_MV, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE_IX_MV}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE_IX, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE_IX}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_PROSAVAGE_PM, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_PROSAVAGE_PM}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_PROSAVAGE_KM, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_PROSAVAGE_KM}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_S3TWISTER_P, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_S3TWISTER_P}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_S3TWISTER_K, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_S3TWISTER_K}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_PROSAVAGE_DDR, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_PROSAVAGE_DDR}, - - {PCI_VENDOR_ID_S3, PCI_CHIP_PROSAVAGE_DDRK, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_PROSAVAGE_DDRK}, - - {0, 0, 0, 0, 0, 0, 0} -}; - -MODULE_DEVICE_TABLE(pci, savagefb_devices); - -static struct pci_driver savagefb_driver = { - .name = "savagefb", - .id_table = savagefb_devices, - .probe = savagefb_probe, - .suspend = savagefb_suspend, - .resume = savagefb_resume, - .remove = __devexit_p(savagefb_remove) -}; - -/* **************************** exit-time only **************************** */ - -static void __exit savage_done (void) -{ - DBG("savage_done"); - pci_unregister_driver (&savagefb_driver); -} - - -/* ************************* init in-kernel code ************************** */ - -int __init savagefb_setup(char *options) -{ -#ifndef MODULE - char *this_opt; - - if (!options || !*options) - return 0; - - while ((this_opt = strsep(&options, ",")) != NULL) { - mode_option = this_opt; - } -#endif /* !MODULE */ - return 0; -} - -int __init savagefb_init(void) -{ - char *option; - - DBG("savagefb_init"); - - if (fb_get_options("savagefb", &option)) - return -ENODEV; - - savagefb_setup(option); - return pci_register_driver (&savagefb_driver); - -} - -module_init(savagefb_init); -module_exit(savage_done); diff -puN /dev/null drivers/video/savage/savagefb_driver.c --- /dev/null Thu Apr 11 07:25:15 2002 +++ 25-akpm/drivers/video/savage/savagefb_driver.c Sun Mar 6 17:18:10 2005 @@ -0,0 +1,2280 @@ +/* + * linux/drivers/video/savagefb.c -- S3 Savage Framebuffer Driver + * + * Copyright (c) 2001-2002 Denis Oliver Kropp + * Sven Neumann + * + * + * Card specific code is based on XFree86's savage driver. + * Framebuffer framework code is based on code of cyber2000fb and tdfxfb. + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * 0.4.0 (neo) + * - hardware accelerated clear and move + * + * 0.3.2 (dok) + * - wait for vertical retrace before writing to cr67 + * at the beginning of savagefb_set_par + * - use synchronization registers cr23 and cr26 + * + * 0.3.1 (dok) + * - reset 3D engine + * - don't return alpha bits for 32bit format + * + * 0.3.0 (dok) + * - added WaitIdle functions for all Savage types + * - do WaitIdle before mode switching + * - code cleanup + * + * 0.2.0 (dok) + * - first working version + * + * + * TODO + * - clock validations in decode_var + * + * BUGS + * - white margin on bootup + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#ifdef CONFIG_MTRR +#include +#endif + +#include "savagefb.h" + + +#define SAVAGEFB_VERSION "0.4.0_2.6" + +/* --------------------------------------------------------------------- */ + + +static char *mode_option __initdata = NULL; +static int paletteEnabled = 0; + +#ifdef MODULE + +MODULE_AUTHOR("(c) 2001-2002 Denis Oliver Kropp "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("FBDev driver for S3 Savage PCI/AGP Chips"); + +#endif + + +/* --------------------------------------------------------------------- */ + +static void vgaHWSeqReset (struct savagefb_par *par, int start) +{ + if (start) + VGAwSEQ (0x00, 0x01); /* Synchronous Reset */ + else + VGAwSEQ (0x00, 0x03); /* End Reset */ +} + +static void vgaHWProtect (struct savagefb_par *par, int on) +{ + unsigned char tmp; + + if (on) { + /* + * Turn off screen and disable sequencer. + */ + tmp = VGArSEQ (0x01); + + vgaHWSeqReset (par, 1); /* start synchronous reset */ + VGAwSEQ (0x01, tmp | 0x20); /* disable the display */ + + VGAenablePalette(); + } else { + /* + * Reenable sequencer, then turn on screen. + */ + + tmp = VGArSEQ (0x01); + + VGAwSEQ (0x01, tmp & ~0x20); /* reenable display */ + vgaHWSeqReset (par, 0); /* clear synchronous reset */ + + VGAdisablePalette(); + } +} + +static void vgaHWRestore (struct savagefb_par *par) +{ + int i; + + VGAwMISC (par->MiscOutReg); + + for (i = 1; i < 5; i++) + VGAwSEQ (i, par->Sequencer[i]); + + /* Ensure CRTC registers 0-7 are unlocked by clearing bit 7 or + CRTC[17] */ + VGAwCR (17, par->CRTC[17] & ~0x80); + + for (i = 0; i < 25; i++) + VGAwCR (i, par->CRTC[i]); + + for (i = 0; i < 9; i++) + VGAwGR (i, par->Graphics[i]); + + VGAenablePalette(); + + for (i = 0; i < 21; i++) + VGAwATTR (i, par->Attribute[i]); + + VGAdisablePalette(); +} + +static void vgaHWInit (struct fb_var_screeninfo *var, + struct savagefb_par *par, + struct xtimings *timings) +{ + par->MiscOutReg = 0x23; + + if (!(timings->sync & FB_SYNC_HOR_HIGH_ACT)) + par->MiscOutReg |= 0x40; + + if (!(timings->sync & FB_SYNC_VERT_HIGH_ACT)) + par->MiscOutReg |= 0x80; + + /* + * Time Sequencer + */ + par->Sequencer[0x00] = 0x00; + par->Sequencer[0x01] = 0x01; + par->Sequencer[0x02] = 0x0F; + par->Sequencer[0x03] = 0x00; /* Font select */ + par->Sequencer[0x04] = 0x0E; /* Misc */ + + /* + * CRTC Controller + */ + par->CRTC[0x00] = (timings->HTotal >> 3) - 5; + par->CRTC[0x01] = (timings->HDisplay >> 3) - 1; + par->CRTC[0x02] = (timings->HSyncStart >> 3) - 1; + par->CRTC[0x03] = (((timings->HSyncEnd >> 3) - 1) & 0x1f) | 0x80; + par->CRTC[0x04] = (timings->HSyncStart >> 3); + par->CRTC[0x05] = ((((timings->HSyncEnd >> 3) - 1) & 0x20) << 2) | + (((timings->HSyncEnd >> 3)) & 0x1f); + par->CRTC[0x06] = (timings->VTotal - 2) & 0xFF; + par->CRTC[0x07] = (((timings->VTotal - 2) & 0x100) >> 8) | + (((timings->VDisplay - 1) & 0x100) >> 7) | + ((timings->VSyncStart & 0x100) >> 6) | + (((timings->VSyncStart - 1) & 0x100) >> 5) | + 0x10 | + (((timings->VTotal - 2) & 0x200) >> 4) | + (((timings->VDisplay - 1) & 0x200) >> 3) | + ((timings->VSyncStart & 0x200) >> 2); + par->CRTC[0x08] = 0x00; + par->CRTC[0x09] = (((timings->VSyncStart - 1) & 0x200) >> 4) | 0x40; + + if (timings->dblscan) + par->CRTC[0x09] |= 0x80; + + par->CRTC[0x0a] = 0x00; + par->CRTC[0x0b] = 0x00; + par->CRTC[0x0c] = 0x00; + par->CRTC[0x0d] = 0x00; + par->CRTC[0x0e] = 0x00; + par->CRTC[0x0f] = 0x00; + par->CRTC[0x10] = timings->VSyncStart & 0xff; + par->CRTC[0x11] = (timings->VSyncEnd & 0x0f) | 0x20; + par->CRTC[0x12] = (timings->VDisplay - 1) & 0xff; + par->CRTC[0x13] = var->xres_virtual >> 4; + par->CRTC[0x14] = 0x00; + par->CRTC[0x15] = (timings->VSyncStart - 1) & 0xff; + par->CRTC[0x16] = (timings->VSyncEnd - 1) & 0xff; + par->CRTC[0x17] = 0xc3; + par->CRTC[0x18] = 0xff; + + /* + * are these unnecessary? + * vgaHWHBlankKGA(mode, regp, 0, KGA_FIX_OVERSCAN|KGA_ENABLE_ON_ZERO); + * vgaHWVBlankKGA(mode, regp, 0, KGA_FIX_OVERSCAN|KGA_ENABLE_ON_ZERO); + */ + + /* + * Graphics Display Controller + */ + par->Graphics[0x00] = 0x00; + par->Graphics[0x01] = 0x00; + par->Graphics[0x02] = 0x00; + par->Graphics[0x03] = 0x00; + par->Graphics[0x04] = 0x00; + par->Graphics[0x05] = 0x40; + par->Graphics[0x06] = 0x05; /* only map 64k VGA memory !!!! */ + par->Graphics[0x07] = 0x0F; + par->Graphics[0x08] = 0xFF; + + + par->Attribute[0x00] = 0x00; /* standard colormap translation */ + par->Attribute[0x01] = 0x01; + par->Attribute[0x02] = 0x02; + par->Attribute[0x03] = 0x03; + par->Attribute[0x04] = 0x04; + par->Attribute[0x05] = 0x05; + par->Attribute[0x06] = 0x06; + par->Attribute[0x07] = 0x07; + par->Attribute[0x08] = 0x08; + par->Attribute[0x09] = 0x09; + par->Attribute[0x0a] = 0x0A; + par->Attribute[0x0b] = 0x0B; + par->Attribute[0x0c] = 0x0C; + par->Attribute[0x0d] = 0x0D; + par->Attribute[0x0e] = 0x0E; + par->Attribute[0x0f] = 0x0F; + par->Attribute[0x10] = 0x41; + par->Attribute[0x11] = 0xFF; + par->Attribute[0x12] = 0x0F; + par->Attribute[0x13] = 0x00; + par->Attribute[0x14] = 0x00; +} + +/* -------------------- Hardware specific routines ------------------------- */ + +/* + * Hardware Acceleration for SavageFB + */ + +/* Wait for fifo space */ +static void +savage3D_waitfifo(struct savagefb_par *par, int space) +{ + int slots = MAXFIFO - space; + + while ((savage_in32(0x48C00) & 0x0000ffff) > slots); +} + +static void +savage4_waitfifo(struct savagefb_par *par, int space) +{ + int slots = MAXFIFO - space; + + while ((savage_in32(0x48C60) & 0x001fffff) > slots); +} + +static void +savage2000_waitfifo(struct savagefb_par *par, int space) +{ + int slots = MAXFIFO - space; + + while ((savage_in32(0x48C60) & 0x0000ffff) > slots); +} + +/* Wait for idle accelerator */ +static void +savage3D_waitidle(struct savagefb_par *par) +{ + while ((savage_in32(0x48C00) & 0x0008ffff) != 0x80000); +} + +static void +savage4_waitidle(struct savagefb_par *par) +{ + while ((savage_in32(0x48C60) & 0x00a00000) != 0x00a00000); +} + +static void +savage2000_waitidle(struct savagefb_par *par) +{ + while ((savage_in32(0x48C60) & 0x009fffff)); +} + + +static void +SavageSetup2DEngine (struct savagefb_par *par) +{ + unsigned long GlobalBitmapDescriptor; + + GlobalBitmapDescriptor = 1 | 8 | BCI_BD_BW_DISABLE; + BCI_BD_SET_BPP (GlobalBitmapDescriptor, par->depth); + BCI_BD_SET_STRIDE (GlobalBitmapDescriptor, par->vwidth); + + switch(par->chip) { + case S3_SAVAGE3D: + case S3_SAVAGE_MX: + /* Disable BCI */ + savage_out32(0x48C18, savage_in32(0x48C18) & 0x3FF0); + /* Setup BCI command overflow buffer */ + savage_out32(0x48C14, (par->cob_offset >> 11) | (par->cob_index << 29)); + /* Program shadow status update. */ + savage_out32(0x48C10, 0x78207220); + savage_out32(0x48C0C, 0); + /* Enable BCI and command overflow buffer */ + savage_out32(0x48C18, savage_in32(0x48C18) | 0x0C); + break; + case S3_SAVAGE4: + case S3_PROSAVAGE: + case S3_SUPERSAVAGE: + /* Disable BCI */ + savage_out32(0x48C18, savage_in32(0x48C18) & 0x3FF0); + /* Program shadow status update */ + savage_out32(0x48C10, 0x00700040); + savage_out32(0x48C0C, 0); + /* Enable BCI without the COB */ + savage_out32(0x48C18, savage_in32(0x48C18) | 0x08); + break; + case S3_SAVAGE2000: + /* Disable BCI */ + savage_out32(0x48C18, 0); + /* Setup BCI command overflow buffer */ + savage_out32(0x48C18, (par->cob_offset >> 7) | (par->cob_index)); + /* Disable shadow status update */ + savage_out32(0x48A30, 0); + /* Enable BCI and command overflow buffer */ + savage_out32(0x48C18, savage_in32(0x48C18) | 0x00280000 ); + break; + default: + break; + } + /* Turn on 16-bit register access. */ + vga_out8(0x3d4, 0x31); + vga_out8(0x3d5, 0x0c); + + /* Set stride to use GBD. */ + vga_out8 (0x3d4, 0x50); + vga_out8 (0x3d5, vga_in8 (0x3d5 ) | 0xC1); + + /* Enable 2D engine. */ + vga_out8 (0x3d4, 0x40 ); + vga_out8 (0x3d5, 0x01 ); + + savage_out32 (MONO_PAT_0, ~0); + savage_out32 (MONO_PAT_1, ~0); + + /* Setup plane masks */ + savage_out32 (0x8128, ~0 ); /* enable all write planes */ + savage_out32 (0x812C, ~0 ); /* enable all read planes */ + savage_out16 (0x8134, 0x27 ); + savage_out16 (0x8136, 0x07 ); + + /* Now set the GBD */ + par->bci_ptr = 0; + par->SavageWaitFifo (par, 4); + + BCI_SEND( BCI_CMD_SETREG | (1 << 16) | BCI_GBD1 ); + BCI_SEND( 0 ); + BCI_SEND( BCI_CMD_SETREG | (1 << 16) | BCI_GBD2 ); + BCI_SEND( GlobalBitmapDescriptor ); +} + + +static void SavageCalcClock(long freq, int min_m, int min_n1, int max_n1, + int min_n2, int max_n2, long freq_min, + long freq_max, unsigned int *mdiv, + unsigned int *ndiv, unsigned int *r) +{ + long diff, best_diff; + unsigned int m; + unsigned char n1, n2, best_n1=16+2, best_n2=2, best_m=125+2; + + if (freq < freq_min / (1 << max_n2)) { + printk (KERN_ERR "invalid frequency %ld Khz\n", freq); + freq = freq_min / (1 << max_n2); + } + if (freq > freq_max / (1 << min_n2)) { + printk (KERN_ERR "invalid frequency %ld Khz\n", freq); + freq = freq_max / (1 << min_n2); + } + + /* work out suitable timings */ + best_diff = freq; + + for (n2=min_n2; n2<=max_n2; n2++) { + for (n1=min_n1+2; n1<=max_n1+2; n1++) { + m = (freq * n1 * (1 << n2) + HALF_BASE_FREQ) / + BASE_FREQ; + if (m < min_m+2 || m > 127+2) + continue; + if ((m * BASE_FREQ >= freq_min * n1) && + (m * BASE_FREQ <= freq_max * n1)) { + diff = freq * (1 << n2) * n1 - BASE_FREQ * m; + if (diff < 0) + diff = -diff; + if (diff < best_diff) { + best_diff = diff; + best_m = m; + best_n1 = n1; + best_n2 = n2; + } + } + } + } + + *ndiv = best_n1 - 2; + *r = best_n2; + *mdiv = best_m - 2; +} + +static int common_calc_clock(long freq, int min_m, int min_n1, int max_n1, + int min_n2, int max_n2, long freq_min, + long freq_max, unsigned char *mdiv, + unsigned char *ndiv) +{ + long diff, best_diff; + unsigned int m; + unsigned char n1, n2; + unsigned char best_n1 = 16+2, best_n2 = 2, best_m = 125+2; + + best_diff = freq; + + for (n2 = min_n2; n2 <= max_n2; n2++) { + for (n1 = min_n1+2; n1 <= max_n1+2; n1++) { + m = (freq * n1 * (1 << n2) + HALF_BASE_FREQ) / + BASE_FREQ; + if (m < min_m + 2 || m > 127+2) + continue; + if((m * BASE_FREQ >= freq_min * n1) && + (m * BASE_FREQ <= freq_max * n1)) { + diff = freq * (1 << n2) * n1 - BASE_FREQ * m; + if(diff < 0) + diff = -diff; + if(diff < best_diff) { + best_diff = diff; + best_m = m; + best_n1 = n1; + best_n2 = n2; + } + } + } + } + + if(max_n1 == 63) + *ndiv = (best_n1 - 2) | (best_n2 << 6); + else + *ndiv = (best_n1 - 2) | (best_n2 << 5); + + *mdiv = best_m - 2; + + return 0; +} + +#ifdef SAVAGEFB_DEBUG +/* This function is used to debug, it prints out the contents of s3 regs */ + +static void SavagePrintRegs(void) +{ + unsigned char i; + int vgaCRIndex = 0x3d4; + int vgaCRReg = 0x3d5; + + printk(KERN_DEBUG "SR x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE " + "xF" ); + + for( i = 0; i < 0x70; i++ ) { + if( !(i % 16) ) + printk(KERN_DEBUG "\nSR%xx ", i >> 4 ); + vga_out8( 0x3c4, i ); + printk(KERN_DEBUG " %02x", vga_in8(0x3c5) ); + } + + printk(KERN_DEBUG "\n\nCR x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC " + "xD xE xF" ); + + for( i = 0; i < 0xB7; i++ ) { + if( !(i % 16) ) + printk(KERN_DEBUG "\nCR%xx ", i >> 4 ); + vga_out8( vgaCRIndex, i ); + printk(KERN_DEBUG " %02x", vga_in8(vgaCRReg) ); + } + + printk(KERN_DEBUG "\n\n"); +} +#endif + +/* --------------------------------------------------------------------- */ + +static void savage_get_default_par(struct savagefb_par *par) +{ + unsigned char cr3a, cr53, cr66; + + vga_out16 (0x3d4, 0x4838); + vga_out16 (0x3d4, 0xa039); + vga_out16 (0x3c4, 0x0608); + + vga_out8 (0x3d4, 0x66); + cr66 = vga_in8 (0x3d5); + vga_out8 (0x3d5, cr66 | 0x80); + vga_out8 (0x3d4, 0x3a); + cr3a = vga_in8 (0x3d5); + vga_out8 (0x3d5, cr3a | 0x80); + vga_out8 (0x3d4, 0x53); + cr53 = vga_in8 (0x3d5); + vga_out8 (0x3d5, cr53 & 0x7f); + + vga_out8 (0x3d4, 0x66); + vga_out8 (0x3d5, cr66); + vga_out8 (0x3d4, 0x3a); + vga_out8 (0x3d5, cr3a); + + vga_out8 (0x3d4, 0x66); + vga_out8 (0x3d5, cr66); + vga_out8 (0x3d4, 0x3a); + vga_out8 (0x3d5, cr3a); + + /* unlock extended seq regs */ + vga_out8 (0x3c4, 0x08); + par->SR08 = vga_in8 (0x3c5); + vga_out8 (0x3c5, 0x06); + + /* now save all the extended regs we need */ + vga_out8 (0x3d4, 0x31); + par->CR31 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x32); + par->CR32 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x34); + par->CR34 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x36); + par->CR36 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x3a); + par->CR3A = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x40); + par->CR40 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x42); + par->CR42 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x45); + par->CR45 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x50); + par->CR50 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x51); + par->CR51 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x53); + par->CR53 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x58); + par->CR58 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x60); + par->CR60 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x66); + par->CR66 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x67); + par->CR67 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x68); + par->CR68 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x69); + par->CR69 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x6f); + par->CR6F = vga_in8 (0x3d5); + + vga_out8 (0x3d4, 0x33); + par->CR33 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x86); + par->CR86 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x88); + par->CR88 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x90); + par->CR90 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x91); + par->CR91 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0xb0); + par->CRB0 = vga_in8 (0x3d5) | 0x80; + + /* extended mode timing regs */ + vga_out8 (0x3d4, 0x3b); + par->CR3B = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x3c); + par->CR3C = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x43); + par->CR43 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x5d); + par->CR5D = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x5e); + par->CR5E = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x65); + par->CR65 = vga_in8 (0x3d5); + + /* save seq extended regs for DCLK PLL programming */ + vga_out8 (0x3c4, 0x0e); + par->SR0E = vga_in8 (0x3c5); + vga_out8 (0x3c4, 0x0f); + par->SR0F = vga_in8 (0x3c5); + vga_out8 (0x3c4, 0x10); + par->SR10 = vga_in8 (0x3c5); + vga_out8 (0x3c4, 0x11); + par->SR11 = vga_in8 (0x3c5); + vga_out8 (0x3c4, 0x12); + par->SR12 = vga_in8 (0x3c5); + vga_out8 (0x3c4, 0x13); + par->SR13 = vga_in8 (0x3c5); + vga_out8 (0x3c4, 0x29); + par->SR29 = vga_in8 (0x3c5); + + vga_out8 (0x3c4, 0x15); + par->SR15 = vga_in8 (0x3c5); + vga_out8 (0x3c4, 0x30); + par->SR30 = vga_in8 (0x3c5); + vga_out8 (0x3c4, 0x18); + par->SR18 = vga_in8 (0x3c5); + + /* Save flat panel expansion regsters. */ + if (par->chip == S3_SAVAGE_MX) { + int i; + + for (i = 0; i < 8; i++) { + vga_out8 (0x3c4, 0x54+i); + par->SR54[i] = vga_in8 (0x3c5); + } + } + + vga_out8 (0x3d4, 0x66); + cr66 = vga_in8 (0x3d5); + vga_out8 (0x3d5, cr66 | 0x80); + vga_out8 (0x3d4, 0x3a); + cr3a = vga_in8 (0x3d5); + vga_out8 (0x3d5, cr3a | 0x80); + + /* now save MIU regs */ + if (par->chip != S3_SAVAGE_MX) { + par->MMPR0 = savage_in32(FIFO_CONTROL_REG); + par->MMPR1 = savage_in32(MIU_CONTROL_REG); + par->MMPR2 = savage_in32(STREAMS_TIMEOUT_REG); + par->MMPR3 = savage_in32(MISC_TIMEOUT_REG); + } + + vga_out8 (0x3d4, 0x3a); + vga_out8 (0x3d5, cr3a); + vga_out8 (0x3d4, 0x66); + vga_out8 (0x3d5, cr66); +} + +static void savage_update_var(struct fb_var_screeninfo *var, struct fb_videomode *modedb) +{ + var->xres = var->xres_virtual = modedb->xres; + var->yres = modedb->yres; + if (var->yres_virtual < var->yres) + var->yres_virtual = var->yres; + var->xoffset = var->yoffset = 0; + var->pixclock = modedb->pixclock; + var->left_margin = modedb->left_margin; + var->right_margin = modedb->right_margin; + var->upper_margin = modedb->upper_margin; + var->lower_margin = modedb->lower_margin; + var->hsync_len = modedb->hsync_len; + var->vsync_len = modedb->vsync_len; + var->sync = modedb->sync; + var->vmode = modedb->vmode; +} + +static int savagefb_check_var (struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct savagefb_par *par = (struct savagefb_par *)info->par; + int memlen, vramlen, mode_valid = 0; + + DBG("savagefb_check_var"); + + var->transp.offset = 0; + var->transp.length = 0; + switch (var->bits_per_pixel) { + case 8: + var->red.offset = var->green.offset = + var->blue.offset = 0; + var->red.length = var->green.length = + var->blue.length = var->bits_per_pixel; + break; + case 16: + var->red.offset = 11; + var->red.length = 5; + var->green.offset = 5; + var->green.length = 6; + var->blue.offset = 0; + var->blue.length = 5; + break; + case 32: + var->transp.offset = 24; + var->transp.length = 8; + var->red.offset = 16; + var->red.length = 8; + var->green.offset = 8; + var->green.length = 8; + var->blue.offset = 0; + var->blue.length = 8; + break; + + default: + return -EINVAL; + } + + if (!info->monspecs.hfmax || !info->monspecs.vfmax || + !info->monspecs.dclkmax || !fb_validate_mode(var, info)) + mode_valid = 1; + + /* calculate modeline if supported by monitor */ + if (!mode_valid && info->monspecs.gtf) { + if (!fb_get_mode(FB_MAXTIMINGS, 0, var, info)) + mode_valid = 1; + } + + if (!mode_valid) { + struct fb_videomode *mode; + + mode = fb_find_best_mode(var, &info->modelist); + if (mode) { + savage_update_var(var, mode); + mode_valid = 1; + } + } + + if (!mode_valid && info->monspecs.modedb_len) + return -EINVAL; + + /* Is the mode larger than the LCD panel? */ + if (par->SavagePanelWidth && + (var->xres > par->SavagePanelWidth || + var->yres > par->SavagePanelHeight)) { + printk (KERN_INFO "Mode (%dx%d) larger than the LCD panel " + "(%dx%d)\n", var->xres, var->yres, + par->SavagePanelWidth, + par->SavagePanelHeight); + return -1; + } + + if (var->yres_virtual < var->yres) + var->yres_virtual = var->yres; + if (var->xres_virtual < var->xres) + var->xres_virtual = var->xres; + + vramlen = info->fix.smem_len; + + memlen = var->xres_virtual * var->bits_per_pixel * + var->yres_virtual / 8; + if (memlen > vramlen) { + var->yres_virtual = vramlen * 8 / + (var->xres_virtual * var->bits_per_pixel); + memlen = var->xres_virtual * var->bits_per_pixel * + var->yres_virtual / 8; + } + + /* we must round yres/xres down, we already rounded y/xres_virtual up + if it was possible. We should return -EINVAL, but I disagree */ + if (var->yres_virtual < var->yres) + var->yres = var->yres_virtual; + if (var->xres_virtual < var->xres) + var->xres = var->xres_virtual; + if (var->xoffset + var->xres > var->xres_virtual) + var->xoffset = var->xres_virtual - var->xres; + if (var->yoffset + var->yres > var->yres_virtual) + var->yoffset = var->yres_virtual - var->yres; + + return 0; +} + + +static int savagefb_decode_var (struct fb_var_screeninfo *var, + struct savagefb_par *par) +{ + struct xtimings timings; + int width, dclk, i, j; /*, refresh; */ + unsigned int m, n, r; + unsigned char tmp = 0; + unsigned int pixclock = var->pixclock; + + DBG("savagefb_decode_var"); + + memset (&timings, 0, sizeof(timings)); + + if (!pixclock) pixclock = 10000; /* 10ns = 100MHz */ + timings.Clock = 1000000000 / pixclock; + if (timings.Clock < 1) timings.Clock = 1; + timings.dblscan = var->vmode & FB_VMODE_DOUBLE; + timings.interlaced = var->vmode & FB_VMODE_INTERLACED; + timings.HDisplay = var->xres; + timings.HSyncStart = timings.HDisplay + var->right_margin; + timings.HSyncEnd = timings.HSyncStart + var->hsync_len; + timings.HTotal = timings.HSyncEnd + var->left_margin; + timings.VDisplay = var->yres; + timings.VSyncStart = timings.VDisplay + var->lower_margin; + timings.VSyncEnd = timings.VSyncStart + var->vsync_len; + timings.VTotal = timings.VSyncEnd + var->upper_margin; + timings.sync = var->sync; + + + par->depth = var->bits_per_pixel; + par->vwidth = var->xres_virtual; + + if (var->bits_per_pixel == 16 && par->chip == S3_SAVAGE3D) { + timings.HDisplay *= 2; + timings.HSyncStart *= 2; + timings.HSyncEnd *= 2; + timings.HTotal *= 2; + } + + /* + * This will allocate the datastructure and initialize all of the + * generic VGA registers. + */ + vgaHWInit (var, par, &timings); + + /* We need to set CR67 whether or not we use the BIOS. */ + + dclk = timings.Clock; + par->CR67 = 0x00; + + switch( var->bits_per_pixel ) { + case 8: + if( (par->chip == S3_SAVAGE2000) && (dclk >= 230000) ) + par->CR67 = 0x10; /* 8bpp, 2 pixels/clock */ + else + par->CR67 = 0x00; /* 8bpp, 1 pixel/clock */ + break; + case 15: + if ( S3_SAVAGE_MOBILE_SERIES(par->chip) || + ((par->chip == S3_SAVAGE2000) && (dclk >= 230000)) ) + par->CR67 = 0x30; /* 15bpp, 2 pixel/clock */ + else + par->CR67 = 0x20; /* 15bpp, 1 pixels/clock */ + break; + case 16: + if( S3_SAVAGE_MOBILE_SERIES(par->chip) || + ((par->chip == S3_SAVAGE2000) && (dclk >= 230000)) ) + par->CR67 = 0x50; /* 16bpp, 2 pixel/clock */ + else + par->CR67 = 0x40; /* 16bpp, 1 pixels/clock */ + break; + case 24: + par->CR67 = 0x70; + break; + case 32: + par->CR67 = 0xd0; + break; + } + + /* + * Either BIOS use is disabled, or we failed to find a suitable + * match. Fall back to traditional register-crunching. + */ + + vga_out8 (0x3d4, 0x3a); + tmp = vga_in8 (0x3d5); + if (1 /*FIXME:psav->pci_burst*/) + par->CR3A = (tmp & 0x7f) | 0x15; + else + par->CR3A = tmp | 0x95; + + par->CR53 = 0x00; + par->CR31 = 0x8c; + par->CR66 = 0x89; + + vga_out8 (0x3d4, 0x58); + par->CR58 = vga_in8 (0x3d5) & 0x80; + par->CR58 |= 0x13; + + par->SR15 = 0x03 | 0x80; + par->SR18 = 0x00; + par->CR43 = par->CR45 = par->CR65 = 0x00; + + vga_out8 (0x3d4, 0x40); + par->CR40 = vga_in8 (0x3d5) & ~0x01; + + par->MMPR0 = 0x010400; + par->MMPR1 = 0x00; + par->MMPR2 = 0x0808; + par->MMPR3 = 0x08080810; + + SavageCalcClock (dclk, 1, 1, 127, 0, 4, 180000, 360000, &m, &n, &r); + /* m = 107; n = 4; r = 2; */ + + if (par->MCLK <= 0) { + par->SR10 = 255; + par->SR11 = 255; + } else { + common_calc_clock (par->MCLK, 1, 1, 31, 0, 3, 135000, 270000, + &par->SR11, &par->SR10); + /* par->SR10 = 80; // MCLK == 286000 */ + /* par->SR11 = 125; */ + } + + par->SR12 = (r << 6) | (n & 0x3f); + par->SR13 = m & 0xff; + par->SR29 = (r & 4) | (m & 0x100) >> 5 | (n & 0x40) >> 2; + + if (var->bits_per_pixel < 24) + par->MMPR0 -= 0x8000; + else + par->MMPR0 -= 0x4000; + + if (timings.interlaced) + par->CR42 = 0x20; + else + par->CR42 = 0x00; + + par->CR34 = 0x10; /* display fifo */ + + i = ((((timings.HTotal >> 3) - 5) & 0x100) >> 8) | + ((((timings.HDisplay >> 3) - 1) & 0x100) >> 7) | + ((((timings.HSyncStart >> 3) - 1) & 0x100) >> 6) | + ((timings.HSyncStart & 0x800) >> 7); + + if ((timings.HSyncEnd >> 3) - (timings.HSyncStart >> 3) > 64) + i |= 0x08; + if ((timings.HSyncEnd >> 3) - (timings.HSyncStart >> 3) > 32) + i |= 0x20; + + j = (par->CRTC[0] + ((i & 0x01) << 8) + + par->CRTC[4] + ((i & 0x10) << 4) + 1) / 2; + + if (j - (par->CRTC[4] + ((i & 0x10) << 4)) < 4) { + if (par->CRTC[4] + ((i & 0x10) << 4) + 4 <= + par->CRTC[0] + ((i & 0x01) << 8)) + j = par->CRTC[4] + ((i & 0x10) << 4) + 4; + else + j = par->CRTC[0] + ((i & 0x01) << 8) + 1; + } + + par->CR3B = j & 0xff; + i |= (j & 0x100) >> 2; + par->CR3C = (par->CRTC[0] + ((i & 0x01) << 8)) / 2; + par->CR5D = i; + par->CR5E = (((timings.VTotal - 2) & 0x400) >> 10) | + (((timings.VDisplay - 1) & 0x400) >> 9) | + (((timings.VSyncStart) & 0x400) >> 8) | + (((timings.VSyncStart) & 0x400) >> 6) | 0x40; + width = (var->xres_virtual * ((var->bits_per_pixel+7) / 8)) >> 3; + par->CR91 = par->CRTC[19] = 0xff & width; + par->CR51 = (0x300 & width) >> 4; + par->CR90 = 0x80 | (width >> 8); + par->MiscOutReg |= 0x0c; + + /* Set frame buffer description. */ + + if (var->bits_per_pixel <= 8) + par->CR50 = 0; + else if (var->bits_per_pixel <= 16) + par->CR50 = 0x10; + else + par->CR50 = 0x30; + + if (var->xres_virtual <= 640) + par->CR50 |= 0x40; + else if (var->xres_virtual == 800) + par->CR50 |= 0x80; + else if (var->xres_virtual == 1024) + par->CR50 |= 0x00; + else if (var->xres_virtual == 1152) + par->CR50 |= 0x01; + else if (var->xres_virtual == 1280) + par->CR50 |= 0xc0; + else if (var->xres_virtual == 1600) + par->CR50 |= 0x81; + else + par->CR50 |= 0xc1; /* Use GBD */ + + if( par->chip == S3_SAVAGE2000 ) + par->CR33 = 0x08; + else + par->CR33 = 0x20; + + par->CRTC[0x17] = 0xeb; + + par->CR67 |= 1; + + vga_out8(0x3d4, 0x36); + par->CR36 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x68); + par->CR68 = vga_in8 (0x3d5); + par->CR69 = 0; + vga_out8 (0x3d4, 0x6f); + par->CR6F = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x86); + par->CR86 = vga_in8 (0x3d5); + vga_out8 (0x3d4, 0x88); + par->CR88 = vga_in8 (0x3d5) | 0x08; + vga_out8 (0x3d4, 0xb0); + par->CRB0 = vga_in8 (0x3d5) | 0x80; + + return 0; +} + +/* --------------------------------------------------------------------- */ + +/* + * Set a single color register. Return != 0 for invalid regno. + */ +static int savagefb_setcolreg(unsigned regno, + unsigned red, + unsigned green, + unsigned blue, + unsigned transp, + struct fb_info *info) +{ + struct savagefb_par *par = (struct savagefb_par *)info->par; + + if (regno >= NR_PALETTE) + return -EINVAL; + + par->palette[regno].red = red; + par->palette[regno].green = green; + par->palette[regno].blue = blue; + par->palette[regno].transp = transp; + + switch (info->var.bits_per_pixel) { + case 8: + vga_out8 (0x3c8, regno); + + vga_out8 (0x3c9, red >> 10); + vga_out8 (0x3c9, green >> 10); + vga_out8 (0x3c9, blue >> 10); + break; + + case 16: + if (regno < 16) + ((u32 *)info->pseudo_palette)[regno] = + ((red & 0xf800) ) | + ((green & 0xfc00) >> 5) | + ((blue & 0xf800) >> 11); + break; + + case 24: + if (regno < 16) + ((u32 *)info->pseudo_palette)[regno] = + ((red & 0xff00) << 8) | + ((green & 0xff00) ) | + ((blue & 0xff00) >> 8); + break; + case 32: + if (regno < 16) + ((u32 *)info->pseudo_palette)[regno] = + ((transp & 0xff00) << 16) | + ((red & 0xff00) << 8) | + ((green & 0xff00) ) | + ((blue & 0xff00) >> 8); + break; + + default: + return 1; + } + + return 0; +} + +static void savagefb_set_par_int (struct savagefb_par *par) +{ + unsigned char tmp, cr3a, cr66, cr67; + + DBG ("savagefb_set_par_int"); + + par->SavageWaitIdle (par); + + vga_out8 (0x3c2, 0x23); + + vga_out16 (0x3d4, 0x4838); + vga_out16 (0x3d4, 0xa539); + vga_out16 (0x3c4, 0x0608); + + vgaHWProtect (par, 1); + + /* + * Some Savage/MX and /IX systems go nuts when trying to exit the + * server after WindowMaker has displayed a gradient background. I + * haven't been able to find what causes it, but a non-destructive + * switch to mode 3 here seems to eliminate the issue. + */ + + VerticalRetraceWait(); + vga_out8 (0x3d4, 0x67); + cr67 = vga_in8 (0x3d5); + vga_out8 (0x3d5, cr67/*par->CR67*/ & ~0x0c); /* no STREAMS yet */ + + vga_out8 (0x3d4, 0x23); + vga_out8 (0x3d5, 0x00); + vga_out8 (0x3d4, 0x26); + vga_out8 (0x3d5, 0x00); + + /* restore extended regs */ + vga_out8 (0x3d4, 0x66); + vga_out8 (0x3d5, par->CR66); + vga_out8 (0x3d4, 0x3a); + vga_out8 (0x3d5, par->CR3A); + vga_out8 (0x3d4, 0x31); + vga_out8 (0x3d5, par->CR31); + vga_out8 (0x3d4, 0x32); + vga_out8 (0x3d5, par->CR32); + vga_out8 (0x3d4, 0x58); + vga_out8 (0x3d5, par->CR58); + vga_out8 (0x3d4, 0x53); + vga_out8 (0x3d5, par->CR53 & 0x7f); + + vga_out16 (0x3c4, 0x0608); + + /* Restore DCLK registers. */ + + vga_out8 (0x3c4, 0x0e); + vga_out8 (0x3c5, par->SR0E); + vga_out8 (0x3c4, 0x0f); + vga_out8 (0x3c5, par->SR0F); + vga_out8 (0x3c4, 0x29); + vga_out8 (0x3c5, par->SR29); + vga_out8 (0x3c4, 0x15); + vga_out8 (0x3c5, par->SR15); + + /* Restore flat panel expansion regsters. */ + if( par->chip == S3_SAVAGE_MX ) { + int i; + + for( i = 0; i < 8; i++ ) { + vga_out8 (0x3c4, 0x54+i); + vga_out8 (0x3c5, par->SR54[i]); + } + } + + vgaHWRestore (par); + + /* extended mode timing registers */ + vga_out8 (0x3d4, 0x53); + vga_out8 (0x3d5, par->CR53); + vga_out8 (0x3d4, 0x5d); + vga_out8 (0x3d5, par->CR5D); + vga_out8 (0x3d4, 0x5e); + vga_out8 (0x3d5, par->CR5E); + vga_out8 (0x3d4, 0x3b); + vga_out8 (0x3d5, par->CR3B); + vga_out8 (0x3d4, 0x3c); + vga_out8 (0x3d5, par->CR3C); + vga_out8 (0x3d4, 0x43); + vga_out8 (0x3d5, par->CR43); + vga_out8 (0x3d4, 0x65); + vga_out8 (0x3d5, par->CR65); + + /* restore the desired video mode with cr67 */ + vga_out8 (0x3d4, 0x67); + /* following part not present in X11 driver */ + cr67 = vga_in8 (0x3d5) & 0xf; + vga_out8 (0x3d5, 0x50 | cr67); + udelay (10000); + vga_out8 (0x3d4, 0x67); + /* end of part */ + vga_out8 (0x3d5, par->CR67 & ~0x0c); + + /* other mode timing and extended regs */ + vga_out8 (0x3d4, 0x34); + vga_out8 (0x3d5, par->CR34); + vga_out8 (0x3d4, 0x40); + vga_out8 (0x3d5, par->CR40); + vga_out8 (0x3d4, 0x42); + vga_out8 (0x3d5, par->CR42); + vga_out8 (0x3d4, 0x45); + vga_out8 (0x3d5, par->CR45); + vga_out8 (0x3d4, 0x50); + vga_out8 (0x3d5, par->CR50); + vga_out8 (0x3d4, 0x51); + vga_out8 (0x3d5, par->CR51); + + /* memory timings */ + vga_out8 (0x3d4, 0x36); + vga_out8 (0x3d5, par->CR36); + vga_out8 (0x3d4, 0x60); + vga_out8 (0x3d5, par->CR60); + vga_out8 (0x3d4, 0x68); + vga_out8 (0x3d5, par->CR68); + vga_out8 (0x3d4, 0x69); + vga_out8 (0x3d5, par->CR69); + vga_out8 (0x3d4, 0x6f); + vga_out8 (0x3d5, par->CR6F); + + vga_out8 (0x3d4, 0x33); + vga_out8 (0x3d5, par->CR33); + vga_out8 (0x3d4, 0x86); + vga_out8 (0x3d5, par->CR86); + vga_out8 (0x3d4, 0x88); + vga_out8 (0x3d5, par->CR88); + vga_out8 (0x3d4, 0x90); + vga_out8 (0x3d5, par->CR90); + vga_out8 (0x3d4, 0x91); + vga_out8 (0x3d5, par->CR91); + + if (par->chip == S3_SAVAGE4) { + vga_out8 (0x3d4, 0xb0); + vga_out8 (0x3d5, par->CRB0); + } + + vga_out8 (0x3d4, 0x32); + vga_out8 (0x3d5, par->CR32); + + /* unlock extended seq regs */ + vga_out8 (0x3c4, 0x08); + vga_out8 (0x3c5, 0x06); + + /* Restore extended sequencer regs for MCLK. SR10 == 255 indicates + * that we should leave the default SR10 and SR11 values there. + */ + if (par->SR10 != 255) { + vga_out8 (0x3c4, 0x10); + vga_out8 (0x3c5, par->SR10); + vga_out8 (0x3c4, 0x11); + vga_out8 (0x3c5, par->SR11); + } + + /* restore extended seq regs for dclk */ + vga_out8 (0x3c4, 0x0e); + vga_out8 (0x3c5, par->SR0E); + vga_out8 (0x3c4, 0x0f); + vga_out8 (0x3c5, par->SR0F); + vga_out8 (0x3c4, 0x12); + vga_out8 (0x3c5, par->SR12); + vga_out8 (0x3c4, 0x13); + vga_out8 (0x3c5, par->SR13); + vga_out8 (0x3c4, 0x29); + vga_out8 (0x3c5, par->SR29); + + vga_out8 (0x3c4, 0x18); + vga_out8 (0x3c5, par->SR18); + + /* load new m, n pll values for dclk & mclk */ + vga_out8 (0x3c4, 0x15); + tmp = vga_in8 (0x3c5) & ~0x21; + + vga_out8 (0x3c5, tmp | 0x03); + vga_out8 (0x3c5, tmp | 0x23); + vga_out8 (0x3c5, tmp | 0x03); + vga_out8 (0x3c5, par->SR15); + udelay (100); + + vga_out8 (0x3c4, 0x30); + vga_out8 (0x3c5, par->SR30); + vga_out8 (0x3c4, 0x08); + vga_out8 (0x3c5, par->SR08); + + /* now write out cr67 in full, possibly starting STREAMS */ + VerticalRetraceWait(); + vga_out8 (0x3d4, 0x67); + vga_out8 (0x3d5, par->CR67); + + vga_out8 (0x3d4, 0x66); + cr66 = vga_in8 (0x3d5); + vga_out8 (0x3d5, cr66 | 0x80); + vga_out8 (0x3d4, 0x3a); + cr3a = vga_in8 (0x3d5); + vga_out8 (0x3d5, cr3a | 0x80); + + if (par->chip != S3_SAVAGE_MX) { + VerticalRetraceWait(); + savage_out32 (FIFO_CONTROL_REG, par->MMPR0); + par->SavageWaitIdle (par); + savage_out32 (MIU_CONTROL_REG, par->MMPR1); + par->SavageWaitIdle (par); + savage_out32 (STREAMS_TIMEOUT_REG, par->MMPR2); + par->SavageWaitIdle (par); + savage_out32 (MISC_TIMEOUT_REG, par->MMPR3); + } + + vga_out8 (0x3d4, 0x66); + vga_out8 (0x3d5, cr66); + vga_out8 (0x3d4, 0x3a); + vga_out8 (0x3d5, cr3a); + + SavageSetup2DEngine (par); + vgaHWProtect (par, 0); +} + +static void savagefb_update_start (struct savagefb_par *par, + struct fb_var_screeninfo *var) +{ + int base; + + base = ((var->yoffset * var->xres_virtual + (var->xoffset & ~1)) + * ((var->bits_per_pixel+7) / 8)) >> 2; + + /* now program the start address registers */ + vga_out16(0x3d4, (base & 0x00ff00) | 0x0c); + vga_out16(0x3d4, ((base & 0x00ff) << 8) | 0x0d); + vga_out8 (0x3d4, 0x69); + vga_out8 (0x3d5, (base & 0x7f0000) >> 16); +} + + +static void savagefb_set_fix(struct fb_info *info) +{ + info->fix.line_length = info->var.xres_virtual * + info->var.bits_per_pixel / 8; + + if (info->var.bits_per_pixel == 8) + info->fix.visual = FB_VISUAL_PSEUDOCOLOR; + else + info->fix.visual = FB_VISUAL_TRUECOLOR; +} + +#if defined(CONFIG_FB_SAVAGE_ACCEL) +static void savagefb_set_clip(struct fb_info *info) +{ + struct savagefb_par *par = (struct savagefb_par *)info->par; + int cmd; + + cmd = BCI_CMD_NOP | BCI_CMD_CLIP_NEW; + par->bci_ptr = 0; + par->SavageWaitFifo(par,3); + BCI_SEND(cmd); + BCI_SEND(BCI_CLIP_TL(0, 0)); + BCI_SEND(BCI_CLIP_BR(0xfff, 0xfff)); +} +#endif + +static int savagefb_set_par (struct fb_info *info) +{ + struct savagefb_par *par = (struct savagefb_par *)info->par; + struct fb_var_screeninfo *var = &info->var; + int err; + + DBG("savagefb_set_par"); + err = savagefb_decode_var (var, par); + if (err) + return err; + + if (par->dacSpeedBpp <= 0) { + if (var->bits_per_pixel > 24) + par->dacSpeedBpp = par->clock[3]; + else if (var->bits_per_pixel >= 24) + par->dacSpeedBpp = par->clock[2]; + else if ((var->bits_per_pixel > 8) && (var->bits_per_pixel < 24)) + par->dacSpeedBpp = par->clock[1]; + else if (var->bits_per_pixel <= 8) + par->dacSpeedBpp = par->clock[0]; + } + + /* Set ramdac limits */ + par->maxClock = par->dacSpeedBpp; + par->minClock = 10000; + + savagefb_set_par_int (par); + savagefb_update_start (par, var); + fb_set_cmap (&info->cmap, info); + savagefb_set_fix(info); + savagefb_set_clip(info); + + SavagePrintRegs(); + return 0; +} + +/* + * Pan or Wrap the Display + */ +static int savagefb_pan_display (struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct savagefb_par *par = (struct savagefb_par *)info->par; + u_int y_bottom; + + y_bottom = var->yoffset; + + if (!(var->vmode & FB_VMODE_YWRAP)) + y_bottom += var->yres; + + if (var->xoffset > (var->xres_virtual - var->xres)) + return -EINVAL; + if (y_bottom > info->var.yres_virtual) + return -EINVAL; + + savagefb_update_start (par, var); + + info->var.xoffset = var->xoffset; + info->var.yoffset = var->yoffset; + + if (var->vmode & FB_VMODE_YWRAP) + info->var.vmode |= FB_VMODE_YWRAP; + else + info->var.vmode &= ~FB_VMODE_YWRAP; + + return 0; +} + + +static struct fb_ops savagefb_ops = { + .owner = THIS_MODULE, + .fb_check_var = savagefb_check_var, + .fb_set_par = savagefb_set_par, + .fb_setcolreg = savagefb_setcolreg, + .fb_pan_display = savagefb_pan_display, +#if defined(CONFIG_FB_SAVAGE_ACCEL) + .fb_fillrect = savagefb_fillrect, + .fb_copyarea = savagefb_copyarea, + .fb_imageblit = savagefb_imageblit, + .fb_sync = savagefb_sync, +#else + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +#endif + .fb_cursor = soft_cursor, +}; + +/* --------------------------------------------------------------------- */ + +static struct fb_var_screeninfo __devinitdata savagefb_var800x600x8 = { + .accel_flags = FB_ACCELF_TEXT, + .xres = 800, + .yres = 600, + .xres_virtual = 800, + .yres_virtual = 600, + .bits_per_pixel = 8, + .pixclock = 25000, + .left_margin = 88, + .right_margin = 40, + .upper_margin = 23, + .lower_margin = 1, + .hsync_len = 128, + .vsync_len = 4, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED +}; + +static void savage_enable_mmio (struct savagefb_par *par) +{ + unsigned char val; + + DBG ("savage_enable_mmio\n"); + + val = vga_in8 (0x3c3); + vga_out8 (0x3c3, val | 0x01); + val = vga_in8 (0x3cc); + vga_out8 (0x3c2, val | 0x01); + + if (par->chip >= S3_SAVAGE4) { + vga_out8 (0x3d4, 0x40); + val = vga_in8 (0x3d5); + vga_out8 (0x3d5, val | 1); + } +} + + +static void savage_disable_mmio (struct savagefb_par *par) +{ + unsigned char val; + + DBG ("savage_disable_mmio\n"); + + if(par->chip >= S3_SAVAGE4 ) { + vga_out8 (0x3d4, 0x40); + val = vga_in8 (0x3d5); + vga_out8 (0x3d5, val | 1); + } +} + + +static int __devinit savage_map_mmio (struct fb_info *info) +{ + struct savagefb_par *par = (struct savagefb_par *)info->par; + DBG ("savage_map_mmio"); + + if (S3_SAVAGE3D_SERIES (par->chip)) + par->mmio.pbase = pci_resource_start (par->pcidev, 0) + + SAVAGE_NEWMMIO_REGBASE_S3; + else + par->mmio.pbase = pci_resource_start (par->pcidev, 0) + + SAVAGE_NEWMMIO_REGBASE_S4; + + par->mmio.len = SAVAGE_NEWMMIO_REGSIZE; + + par->mmio.vbase = ioremap (par->mmio.pbase, par->mmio.len); + if (!par->mmio.vbase) { + printk ("savagefb: unable to map memory mapped IO\n"); + return -ENOMEM; + } else + printk (KERN_INFO "savagefb: mapped io at %p\n", + par->mmio.vbase); + + info->fix.mmio_start = par->mmio.pbase; + info->fix.mmio_len = par->mmio.len; + + par->bci_base = (u32*)(par->mmio.vbase + BCI_BUFFER_OFFSET); + par->bci_ptr = 0; + + savage_enable_mmio (par); + + return 0; +} + +static void __devinit savage_unmap_mmio (struct fb_info *info) +{ + struct savagefb_par *par = (struct savagefb_par *)info->par; + DBG ("savage_unmap_mmio"); + + savage_disable_mmio(par); + + if (par->mmio.vbase) { + iounmap ((void *)par->mmio.vbase); + par->mmio.vbase = NULL; + } +} + +static int __devinit savage_map_video (struct fb_info *info, + int video_len) +{ + struct savagefb_par *par = (struct savagefb_par *)info->par; + int resource; + + DBG("savage_map_video"); + + if (S3_SAVAGE3D_SERIES (par->chip)) + resource = 0; + else + resource = 1; + + par->video.pbase = pci_resource_start (par->pcidev, resource); + par->video.len = video_len; + par->video.vbase = ioremap (par->video.pbase, par->video.len); + + if (!par->video.vbase) { + printk ("savagefb: unable to map screen memory\n"); + return -ENOMEM; + } else + printk (KERN_INFO "savagefb: mapped framebuffer at %p, " + "pbase == %x\n", par->video.vbase, par->video.pbase); + + info->fix.smem_start = par->video.pbase; + info->fix.smem_len = par->video.len - par->cob_size; + info->screen_base = par->video.vbase; + +#ifdef CONFIG_MTRR + par->video.mtrr = mtrr_add (par->video.pbase, video_len, + MTRR_TYPE_WRCOMB, 1); +#endif + + /* Clear framebuffer, it's all white in memory after boot */ + memset (par->video.vbase, 0, par->video.len); + + return 0; +} + +static void __devinit savage_unmap_video (struct fb_info *info) +{ + struct savagefb_par *par = (struct savagefb_par *)info->par; + + DBG("savage_unmap_video"); + + if (par->video.vbase) { +#ifdef CONFIG_MTRR + mtrr_del (par->video.mtrr, par->video.pbase, par->video.len); +#endif + + iounmap (par->video.vbase); + par->video.vbase = NULL; + info->screen_base = NULL; + } +} + +static int __devinit savage_init_hw (struct savagefb_par *par) +{ + unsigned char config1, m, n, n1, n2, sr8, cr3f, cr66 = 0, tmp; + + static unsigned char RamSavage3D[] = { 8, 4, 4, 2 }; + static unsigned char RamSavage4[] = { 2, 4, 8, 12, 16, 32, 64, 32 }; + static unsigned char RamSavageMX[] = { 2, 8, 4, 16, 8, 16, 4, 16 }; + static unsigned char RamSavageNB[] = { 0, 2, 4, 8, 16, 32, 2, 2 }; + + int videoRam, videoRambytes; + + DBG("savage_init_hw"); + + /* unprotect CRTC[0-7] */ + vga_out8(0x3d4, 0x11); + tmp = vga_in8(0x3d5); + vga_out8(0x3d5, tmp & 0x7f); + + /* unlock extended regs */ + vga_out16(0x3d4, 0x4838); + vga_out16(0x3d4, 0xa039); + vga_out16(0x3c4, 0x0608); + + vga_out8(0x3d4, 0x40); + tmp = vga_in8(0x3d5); + vga_out8(0x3d5, tmp & ~0x01); + + /* unlock sys regs */ + vga_out8(0x3d4, 0x38); + vga_out8(0x3d5, 0x48); + + /* Unlock system registers. */ + vga_out16(0x3d4, 0x4838); + + /* Next go on to detect amount of installed ram */ + + vga_out8(0x3d4, 0x36); /* for register CR36 (CONFG_REG1), */ + config1 = vga_in8(0x3d5); /* get amount of vram installed */ + + /* Compute the amount of video memory and offscreen memory. */ + + switch (par->chip) { + case S3_SAVAGE3D: + videoRam = RamSavage3D[ (config1 & 0xC0) >> 6 ] * 1024; + break; + + case S3_SAVAGE4: + /* + * The Savage4 has one ugly special case to consider. On + * systems with 4 banks of 2Mx32 SDRAM, the BIOS says 4MB + * when it really means 8MB. Why do it the same when you + * can do it different... + */ + vga_out8(0x3d4, 0x68); /* memory control 1 */ + if( (vga_in8(0x3d5) & 0xC0) == (0x01 << 6) ) + RamSavage4[1] = 8; + + /*FALLTHROUGH*/ + + case S3_SAVAGE2000: + videoRam = RamSavage4[ (config1 & 0xE0) >> 5 ] * 1024; + break; + + case S3_SAVAGE_MX: + case S3_SUPERSAVAGE: + videoRam = RamSavageMX[ (config1 & 0x0E) >> 1 ] * 1024; + break; + + case S3_PROSAVAGE: + videoRam = RamSavageNB[ (config1 & 0xE0) >> 5 ] * 1024; + break; + + default: + /* How did we get here? */ + videoRam = 0; + break; + } + + videoRambytes = videoRam * 1024; + + printk (KERN_INFO "savagefb: probed videoram: %dk\n", videoRam); + + /* reset graphics engine to avoid memory corruption */ + vga_out8 (0x3d4, 0x66); + cr66 = vga_in8 (0x3d5); + vga_out8 (0x3d5, cr66 | 0x02); + udelay (10000); + + vga_out8 (0x3d4, 0x66); + vga_out8 (0x3d5, cr66 & ~0x02); /* clear reset flag */ + udelay (10000); + + + /* + * reset memory interface, 3D engine, AGP master, PCI master, + * master engine unit, motion compensation/LPB + */ + vga_out8 (0x3d4, 0x3f); + cr3f = vga_in8 (0x3d5); + vga_out8 (0x3d5, cr3f | 0x08); + udelay (10000); + + vga_out8 (0x3d4, 0x3f); + vga_out8 (0x3d5, cr3f & ~0x08); /* clear reset flags */ + udelay (10000); + + /* Savage ramdac speeds */ + par->numClocks = 4; + par->clock[0] = 250000; + par->clock[1] = 250000; + par->clock[2] = 220000; + par->clock[3] = 220000; + + /* detect current mclk */ + vga_out8(0x3c4, 0x08); + sr8 = vga_in8(0x3c5); + vga_out8(0x3c5, 0x06); + vga_out8(0x3c4, 0x10); + n = vga_in8(0x3c5); + vga_out8(0x3c4, 0x11); + m = vga_in8(0x3c5); + vga_out8(0x3c4, 0x08); + vga_out8(0x3c5, sr8); + m &= 0x7f; + n1 = n & 0x1f; + n2 = (n >> 5) & 0x03; + par->MCLK = ((1431818 * (m+2)) / (n1+2) / (1 << n2) + 50) / 100; + printk (KERN_INFO "savagefb: Detected current MCLK value of %d kHz\n", + par->MCLK); + + /* Check LCD panel parrmation */ + + if (par->chip == S3_SAVAGE_MX) { + unsigned char cr6b = VGArCR( 0x6b ); + + int panelX = (VGArSEQ (0x61) + + ((VGArSEQ (0x66) & 0x02) << 7) + 1) * 8; + int panelY = (VGArSEQ (0x69) + + ((VGArSEQ (0x6e) & 0x70) << 4) + 1); + + char * sTechnology = "Unknown"; + + /* OK, I admit it. I don't know how to limit the max dot clock + * for LCD panels of various sizes. I thought I copied the + * formula from the BIOS, but many users have parrmed me of + * my folly. + * + * Instead, I'll abandon any attempt to automatically limit the + * clock, and add an LCDClock option to XF86Config. Some day, + * I should come back to this. + */ + + enum ACTIVE_DISPLAYS { /* These are the bits in CR6B */ + ActiveCRT = 0x01, + ActiveLCD = 0x02, + ActiveTV = 0x04, + ActiveCRT2 = 0x20, + ActiveDUO = 0x80 + }; + + if ((VGArSEQ (0x39) & 0x03) == 0) { + sTechnology = "TFT"; + } else if ((VGArSEQ (0x30) & 0x01) == 0) { + sTechnology = "DSTN"; + } else { + sTechnology = "STN"; + } + + printk (KERN_INFO "savagefb: %dx%d %s LCD panel detected %s\n", + panelX, panelY, sTechnology, + cr6b & ActiveLCD ? "and active" : "but not active"); + + if( cr6b & ActiveLCD ) { + /* + * If the LCD is active and panel expansion is enabled, + * we probably want to kill the HW cursor. + */ + + printk (KERN_INFO "savagefb: Limiting video mode to " + "%dx%d\n", panelX, panelY ); + + par->SavagePanelWidth = panelX; + par->SavagePanelHeight = panelY; + + } + } + + savage_get_default_par (par); + + if( S3_SAVAGE4_SERIES(par->chip) ) { + /* + * The Savage4 and ProSavage have COB coherency bugs which + * render the buffer useless. We disable it. + */ + par->cob_index = 2; + par->cob_size = 0x8000 << par->cob_index; + par->cob_offset = videoRambytes; + } else { + /* We use 128kB for the COB on all chips. */ + + par->cob_index = 7; + par->cob_size = 0x400 << par->cob_index; + par->cob_offset = videoRambytes - par->cob_size; + } + + return videoRambytes; +} + +static int __devinit savage_init_fb_info (struct fb_info *info, + struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct savagefb_par *par = (struct savagefb_par *)info->par; + int err = 0; + + par->pcidev = dev; + + info->fix.type = FB_TYPE_PACKED_PIXELS; + info->fix.type_aux = 0; + info->fix.xpanstep = 2; + info->fix.ypanstep = 1; + info->fix.ywrapstep = 0; + info->fix.accel = id->driver_data; + + switch (info->fix.accel) { + case FB_ACCEL_SUPERSAVAGE: + par->chip = S3_SUPERSAVAGE; + snprintf (info->fix.id, 16, "SuperSavage"); + break; + case FB_ACCEL_SAVAGE4: + par->chip = S3_SAVAGE4; + snprintf (info->fix.id, 16, "Savage4"); + break; + case FB_ACCEL_SAVAGE3D: + par->chip = S3_SAVAGE3D; + snprintf (info->fix.id, 16, "Savage3D"); + break; + case FB_ACCEL_SAVAGE3D_MV: + par->chip = S3_SAVAGE3D; + snprintf (info->fix.id, 16, "Savage3D-MV"); + break; + case FB_ACCEL_SAVAGE2000: + par->chip = S3_SAVAGE2000; + snprintf (info->fix.id, 16, "Savage2000"); + break; + case FB_ACCEL_SAVAGE_MX_MV: + par->chip = S3_SAVAGE_MX; + snprintf (info->fix.id, 16, "Savage/MX-MV"); + break; + case FB_ACCEL_SAVAGE_MX: + par->chip = S3_SAVAGE_MX; + snprintf (info->fix.id, 16, "Savage/MX"); + break; + case FB_ACCEL_SAVAGE_IX_MV: + par->chip = S3_SAVAGE_MX; + snprintf (info->fix.id, 16, "Savage/IX-MV"); + break; + case FB_ACCEL_SAVAGE_IX: + par->chip = S3_SAVAGE_MX; + snprintf (info->fix.id, 16, "Savage/IX"); + break; + case FB_ACCEL_PROSAVAGE_PM: + par->chip = S3_PROSAVAGE; + snprintf (info->fix.id, 16, "ProSavagePM"); + break; + case FB_ACCEL_PROSAVAGE_KM: + par->chip = S3_PROSAVAGE; + snprintf (info->fix.id, 16, "ProSavageKM"); + break; + case FB_ACCEL_S3TWISTER_P: + par->chip = S3_PROSAVAGE; + snprintf (info->fix.id, 16, "TwisterP"); + break; + case FB_ACCEL_S3TWISTER_K: + par->chip = S3_PROSAVAGE; + snprintf (info->fix.id, 16, "TwisterK"); + break; + case FB_ACCEL_PROSAVAGE_DDR: + par->chip = S3_PROSAVAGE; + snprintf (info->fix.id, 16, "ProSavageDDR"); + break; + case FB_ACCEL_PROSAVAGE_DDRK: + par->chip = S3_PROSAVAGE; + snprintf (info->fix.id, 16, "ProSavage8"); + break; + } + + if (S3_SAVAGE3D_SERIES(par->chip)) { + par->SavageWaitIdle = savage3D_waitidle; + par->SavageWaitFifo = savage3D_waitfifo; + } else if (S3_SAVAGE4_SERIES(par->chip) || + S3_SUPERSAVAGE == par->chip) { + par->SavageWaitIdle = savage4_waitidle; + par->SavageWaitFifo = savage4_waitfifo; + } else { + par->SavageWaitIdle = savage2000_waitidle; + par->SavageWaitFifo = savage2000_waitfifo; + } + + info->var.nonstd = 0; + info->var.activate = FB_ACTIVATE_NOW; + info->var.width = -1; + info->var.height = -1; + info->var.accel_flags = 0; + + info->fbops = &savagefb_ops; + info->flags = FBINFO_DEFAULT | + FBINFO_HWACCEL_YPAN | + FBINFO_HWACCEL_XPAN | + FBINFO_MISC_MODESWITCHLATE; + + info->pseudo_palette = par->pseudo_palette; + +#if defined(CONFIG_FB_SAVAGE_ACCEL) + /* FIFO size + padding for commands */ + info->pixmap.addr = kmalloc(8*1024, GFP_KERNEL); + + err = -ENOMEM; + if (info->pixmap.addr) { + memset(info->pixmap.addr, 0, 8*1024); + info->pixmap.size = 8*1024; + info->pixmap.scan_align = 4; + info->pixmap.buf_align = 4; + info->pixmap.access_align = 4; + + fb_alloc_cmap (&info->cmap, NR_PALETTE, 0); + info->flags |= FBINFO_HWACCEL_COPYAREA | + FBINFO_HWACCEL_FILLRECT | + FBINFO_HWACCEL_IMAGEBLIT; + + err = 0; + } +#endif + return err; +} + +/* --------------------------------------------------------------------- */ + +static int __devinit savagefb_probe (struct pci_dev* dev, + const struct pci_device_id* id) +{ + struct fb_info *info; + struct savagefb_par *par; + u_int h_sync, v_sync; + int err, lpitch; + int video_len; + + DBG("savagefb_probe"); + SavagePrintRegs(); + + info = framebuffer_alloc(sizeof(struct savagefb_par), &dev->dev); + if (!info) + return -ENOMEM; + par = info->par; + err = pci_enable_device(dev); + if (err) + goto failed_enable; + + if (pci_request_regions(dev, "savagefb")) { + printk(KERN_ERR "cannot request PCI regions\n"); + goto failed_enable; + } + + err = -ENOMEM; + + if (savage_init_fb_info(info, dev, id)) + goto failed_init; + + err = savage_map_mmio(info); + if (err) + goto failed_mmio; + + video_len = savage_init_hw(par); + if (video_len < 0) { + err = video_len; + goto failed_mmio; + } + + err = savage_map_video(info, video_len); + if (err) + goto failed_video; + + INIT_LIST_HEAD(&info->modelist); +#if defined(CONFIG_FB_SAVAGE_I2C) + savagefb_create_i2c_busses(info); + savagefb_probe_i2c_connector(par, &par->edid); + fb_edid_to_monspecs(par->edid, &info->monspecs); + fb_videomode_to_modelist(info->monspecs.modedb, + info->monspecs.modedb_len, + &info->modelist); +#endif + info->var = savagefb_var800x600x8; + + if (mode_option) { + fb_find_mode(&info->var, info, mode_option, + info->monspecs.modedb, info->monspecs.modedb_len, + NULL, 8); + } else if (info->monspecs.modedb != NULL) { + struct fb_monspecs *specs = &info->monspecs; + struct fb_videomode modedb; + + if (info->monspecs.misc & FB_MISC_1ST_DETAIL) { + int i; + + for (i = 0; i < specs->modedb_len; i++) { + if (specs->modedb[i].flag & FB_MODE_IS_FIRST) { + modedb = specs->modedb[i]; + break; + } + } + } else { + /* otherwise, get first mode in database */ + modedb = specs->modedb[0]; + } + + savage_update_var(&info->var, &modedb); + } + + /* maximize virtual vertical length */ + lpitch = info->var.xres_virtual*((info->var.bits_per_pixel + 7) >> 3); + info->var.yres_virtual = info->fix.smem_len/lpitch; + + if (info->var.yres_virtual < info->var.yres) + goto failed; + +#if defined(CONFIG_FB_SAVAGE_ACCEL) + /* + * The clipping coordinates are masked with 0xFFF, so limit our + * virtual resolutions to these sizes. + */ + if (info->var.yres_virtual > 0x1000) + info->var.yres_virtual = 0x1000; + + if (info->var.xres_virtual > 0x1000) + info->var.xres_virtual = 0x1000; +#endif + savagefb_check_var(&info->var, info); + savagefb_set_fix(info); + + /* + * Calculate the hsync and vsync frequencies. Note that + * we split the 1e12 constant up so that we can preserve + * the precision and fit the results into 32-bit registers. + * (1953125000 * 512 = 1e12) + */ + h_sync = 1953125000 / info->var.pixclock; + h_sync = h_sync * 512 / (info->var.xres + info->var.left_margin + + info->var.right_margin + + info->var.hsync_len); + v_sync = h_sync / (info->var.yres + info->var.upper_margin + + info->var.lower_margin + info->var.vsync_len); + + printk(KERN_INFO "savagefb v" SAVAGEFB_VERSION ": " + "%dkB VRAM, using %dx%d, %d.%03dkHz, %dHz\n", + info->fix.smem_len >> 10, + info->var.xres, info->var.yres, + h_sync / 1000, h_sync % 1000, v_sync); + + + fb_destroy_modedb(info->monspecs.modedb); + info->monspecs.modedb = NULL; + + err = register_framebuffer (info); + if (err < 0) + goto failed; + + printk (KERN_INFO "fb: S3 %s frame buffer device\n", + info->fix.id); + + /* + * Our driver data + */ + pci_set_drvdata(dev, info); + + return 0; + + failed: +#ifdef CONFIG_FB_SAVAGE_I2C + savagefb_delete_i2c_busses(info); +#endif + fb_alloc_cmap (&info->cmap, 0, 0); + savage_unmap_video(info); + failed_video: + savage_unmap_mmio (info); + failed_mmio: + kfree(info->pixmap.addr); + failed_init: + pci_release_regions(dev); + failed_enable: + framebuffer_release(info); + + return err; +} + +static void __devexit savagefb_remove (struct pci_dev *dev) +{ + struct fb_info *info = + (struct fb_info *)pci_get_drvdata(dev); + + DBG("savagefb_remove"); + + if (info) { + /* + * If unregister_framebuffer fails, then + * we will be leaving hooks that could cause + * oopsen laying around. + */ + if (unregister_framebuffer (info)) + printk (KERN_WARNING "savagefb: danger danger! " + "Oopsen imminent!\n"); + +#ifdef CONFIG_FB_SAVAGE_I2C + savagefb_delete_i2c_busses(info); +#endif + fb_alloc_cmap (&info->cmap, 0, 0); + savage_unmap_video (info); + savage_unmap_mmio (info); + kfree(info->pixmap.addr); + pci_release_regions(dev); + framebuffer_release(info); + + /* + * Ensure that the driver data is no longer + * valid. + */ + pci_set_drvdata(dev, NULL); + } +} + +static int savagefb_suspend (struct pci_dev* dev, u32 state) +{ + struct fb_info *info = + (struct fb_info *)pci_get_drvdata(dev); + struct savagefb_par *par = (struct savagefb_par *)info->par; + + DBG("savagefb_suspend"); + printk(KERN_DEBUG "state: %u\n", state); + + acquire_console_sem(); + fb_set_suspend(info, state); + savage_disable_mmio(par); + release_console_sem(); + + pci_disable_device(dev); + pci_set_power_state(dev, state); + + return 0; +} + +static int savagefb_resume (struct pci_dev* dev) +{ + struct fb_info *info = + (struct fb_info *)pci_get_drvdata(dev); + struct savagefb_par *par = (struct savagefb_par *)info->par; + + DBG("savage_resume"); + + pci_set_power_state(dev, 0); + pci_restore_state(dev); + if(pci_enable_device(dev)) + DBG("err"); + + SavagePrintRegs(); + + acquire_console_sem(); + + savage_enable_mmio(par); + savage_init_hw(par); + savagefb_set_par (info); + + fb_set_suspend (info, 0); + release_console_sem(); + + return 0; +} + + +static struct pci_device_id savagefb_devices[] __devinitdata = { + {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_MX128, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_MX64, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_MX64C, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IX128SDR, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IX128DDR, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IX64SDR, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IX64DDR, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IXCSDR, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IXCDDR, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE4}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE3D, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE3D}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE3D_MV, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE3D_MV}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE2000, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE2000}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE_MX_MV, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE_MX_MV}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE_MX, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE_MX}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE_IX_MV, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE_IX_MV}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE_IX, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE_IX}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_PROSAVAGE_PM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_PROSAVAGE_PM}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_PROSAVAGE_KM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_PROSAVAGE_KM}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_S3TWISTER_P, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_S3TWISTER_P}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_S3TWISTER_K, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_S3TWISTER_K}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_PROSAVAGE_DDR, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_PROSAVAGE_DDR}, + + {PCI_VENDOR_ID_S3, PCI_CHIP_PROSAVAGE_DDRK, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_PROSAVAGE_DDRK}, + + {0, 0, 0, 0, 0, 0, 0} +}; + +MODULE_DEVICE_TABLE(pci, savagefb_devices); + +static struct pci_driver savagefb_driver = { + .name = "savagefb", + .id_table = savagefb_devices, + .probe = savagefb_probe, + .suspend = savagefb_suspend, + .resume = savagefb_resume, + .remove = __devexit_p(savagefb_remove) +}; + +/* **************************** exit-time only **************************** */ + +static void __exit savage_done (void) +{ + DBG("savage_done"); + pci_unregister_driver (&savagefb_driver); +} + + +/* ************************* init in-kernel code ************************** */ + +static int __init savagefb_setup(char *options) +{ +#ifndef MODULE + char *this_opt; + + if (!options || !*options) + return 0; + + while ((this_opt = strsep(&options, ",")) != NULL) { + mode_option = this_opt; + } +#endif /* !MODULE */ + return 0; +} + +static int __init savagefb_init(void) +{ + char *option; + + DBG("savagefb_init"); + + if (fb_get_options("savagefb", &option)) + return -ENODEV; + + savagefb_setup(option); + return pci_register_driver (&savagefb_driver); + +} + +module_init(savagefb_init); +module_exit(savage_done); diff -puN drivers/video/savage/savagefb-i2c.c~savagefb-make-savagefb-one-module drivers/video/savage/savagefb-i2c.c --- 25/drivers/video/savage/savagefb-i2c.c~savagefb-make-savagefb-one-module Sun Mar 6 17:18:10 2005 +++ 25-akpm/drivers/video/savage/savagefb-i2c.c Sun Mar 6 17:18:10 2005 @@ -207,7 +207,6 @@ void savagefb_create_i2c_busses(struct f savage_setup_i2c_bus(&par->chan, "SAVAGE DDC2"); } -EXPORT_SYMBOL(savagefb_create_i2c_busses); void savagefb_delete_i2c_busses(struct fb_info *info) { @@ -222,7 +221,6 @@ void savagefb_delete_i2c_busses(struct f par->chan.par = NULL; } -EXPORT_SYMBOL(savagefb_delete_i2c_busses); static u8 *savage_do_probe_i2c_edid(struct savagefb_i2c_chan *chan) { @@ -280,6 +278,5 @@ int savagefb_probe_i2c_connector(struct return 0; } -EXPORT_SYMBOL(savagefb_probe_i2c_connector); MODULE_LICENSE("GPL"); _