From: Geert Uytterhoeven M68k: Remove nowhere referenced files Signed-off-by: Domen Puncer Signed-off-by: Geert Uytterhoeven Signed-off-by: Andrew Morton --- /dev/null | 102 -------------------------------------------------------------- 1 files changed, 102 deletions(-) diff -L arch/m68k/apollo/dn_debug.c -puN arch/m68k/apollo/dn_debug.c~m68k-remove-nowhere-referenced-files /dev/null --- 25/arch/m68k/apollo/dn_debug.c +++ /dev/null 2003-09-15 06:40:47.000000000 -0700 @@ -1,22 +0,0 @@ - -#define DN_DEBUG_BUFFER_BASE 0x82800000 -#define DN_DEBUG_BUFFER_SIZE 8*1024*1024 - -static char *current_dbg_ptr=DN_DEBUG_BUFFER_BASE; - -int dn_deb_printf(const char *fmt, ...) { - - va_list args; - int i; - - if(current_dbg_ptr<(DN_DEBUG_BUFFER_BASE + DN_DEBUG_BUFFER_SIZE)) { - va_start(args,fmt); - i=vsprintf(current_dbg_ptr,fmt,args); - va_end(args); - current_dbg_ptr+=i; - - return i; - } - else - return 0; -} diff -L arch/m68k/sun3x/sun3x_ksyms.c -puN arch/m68k/sun3x/sun3x_ksyms.c~m68k-remove-nowhere-referenced-files /dev/null --- 25/arch/m68k/sun3x/sun3x_ksyms.c +++ /dev/null 2003-09-15 06:40:47.000000000 -0700 @@ -1,13 +0,0 @@ -#include -#include -#include -#include - -/* - * Add things here when you find the need for it. - */ -EXPORT_SYMBOL(dvma_map_align); -EXPORT_SYMBOL(dvma_unmap); -EXPORT_SYMBOL(dvma_malloc_align); -EXPORT_SYMBOL(dvma_free); -EXPORT_SYMBOL(idprom); diff -L include/asm-m68k/atari_SCCserial.h -puN include/asm-m68k/atari_SCCserial.h~m68k-remove-nowhere-referenced-files /dev/null --- 25/include/asm-m68k/atari_SCCserial.h +++ /dev/null 2003-09-15 06:40:47.000000000 -0700 @@ -1,67 +0,0 @@ -#ifndef _ATARI_SCCSERIAL_H -#define _ATARI_SCCSERIAL_H - -/* Special configuration ioctls for the Atari SCC5380 Serial - * Communications Controller - */ - -/* ioctl command codes */ - -#define TIOCGATSCC 0x54c0 /* get SCC configuration */ -#define TIOCSATSCC 0x54c1 /* set SCC configuration */ -#define TIOCDATSCC 0x54c2 /* reset configuration to defaults */ - -/* Clock sources */ - -#define CLK_RTxC 0 -#define CLK_TRxC 1 -#define CLK_PCLK 2 - -/* baud_bases for the common clocks in the Atari. These are the real - * frequencies divided by 16. - */ - -#define SCC_BAUD_BASE_TIMC 19200 /* 0.3072 MHz from TT-MFP, Timer C */ -#define SCC_BAUD_BASE_BCLK 153600 /* 2.4576 MHz */ -#define SCC_BAUD_BASE_PCLK4 229500 /* 3.6720 MHz */ -#define SCC_BAUD_BASE_PCLK 503374 /* 8.0539763 MHz */ -#define SCC_BAUD_BASE_NONE 0 /* for not connected or unused - * clock sources */ - -#define SCC_BAUD_BASE_M147_PCLK 312500 /* 5 MHz */ -#define SCC_BAUD_BASE_M147 312500 /* 5 MHz */ -#define SCC_BAUD_BASE_MVME_PCLK 781250 /* 12.5 MHz */ -#define SCC_BAUD_BASE_MVME 625000 /* 10.000 MHz */ -#define SCC_BAUD_BASE_BVME_PCLK 781250 /* 12.5 MHz */ /* XXX ??? */ -#define SCC_BAUD_BASE_BVME 460800 /* 7.3728 MHz */ - -/* The SCC configuration structure */ - -struct atari_SCCserial { - unsigned RTxC_base; /* base_baud of RTxC */ - unsigned TRxC_base; /* base_baud of TRxC */ - unsigned PCLK_base; /* base_baud of PCLK, for both channels! */ - struct { - unsigned clksrc; /* CLK_RTxC, CLK_TRxC or CLK_PCLK */ - unsigned divisor; /* divisor for base baud, valid values: - * see below */ - } baud_table[17]; /* For 50, 75, 110, 135, 150, 200, 300, - * 600, 1200, 1800, 2400, 4800, 9600, - * 19200, 38400, 57600 and 115200 bps. The - * last two could be replaced by other - * rates > 38400 if they're not possible. - */ -}; - -/* The following divisors are valid: - * - * - CLK_RTxC: 1 or even (1, 2 and 4 are the direct modes, > 4 use - * the BRG) - * - * - CLK_TRxC: 1, 2 or 4 (no BRG, only direct modes possible) - * - * - CLK_PCLK: >= 4 and even (no direct modes, only BRG) - * - */ - -#endif /* _ATARI_SCCSERIAL_H */ _