drivers/hwmon/Kconfig v3.0-rc7

HWMON

Hardware Monitoring support

Hardware monitoring devices let you monitor the hardware health
of a system. Most modern motherboards include such a device. It
can include temperature sensors, voltage sensors, fan speed
sensors and various additional features such as the ability to
control the speed of the fans.  If you want this support you
should say Y here and also to the specific driver(s) for your
sensors chip(s) below.

To find out which specific driver(s) you need, use the
sensors-detect script from the lm_sensors package.  Read
<file:Documentation/hwmon/userspace-tools> for details.

This support can also be built as a module.  If so, the module
will be called hwmon.

HWMON_DEBUG_CHIP

Hardware Monitoring Chip debugging messages

Say Y here if you want the I2C chip drivers to produce a bunch of
debug messages to the system log.  Select this if you are having
a problem with I2C support and want to see more of what is going
on.

Native drivers

SENSORS_ABITUGURU

Abit uGuru (rev 1 & 2)

If you say yes here you get support for the sensor part of the first
and second revision of the Abit uGuru chip. The voltage and frequency
control parts of the Abit uGuru are not supported. The Abit uGuru
chip can be found on Abit uGuru featuring motherboards (most modern
Abit motherboards from before end 2005). For more info and a list
of which motherboards have which revision see
Documentation/hwmon/abituguru

This driver can also be built as a module.  If so, the module
will be called abituguru.

SENSORS_ABITUGURU3

Abit uGuru (rev 3)

If you say yes here you get support for the sensor part of the
third revision of the Abit uGuru chip. Only reading the sensors
and their settings is supported. The third revision of the Abit
uGuru chip can be found on recent Abit motherboards (since end
2005). For more info and a list of which motherboards have which
revision see Documentation/hwmon/abituguru3

This driver can also be built as a module.  If so, the module
will be called abituguru3.

SENSORS_AD7414

Analog Devices AD7414

If you say yes here you get support for the Analog Devices
AD7414 temperature monitoring chip.

This driver can also be built as a module. If so, the module
will be called ad7414.

SENSORS_AD7418

Analog Devices AD7416, AD7417 and AD7418

If you say yes here you get support for the Analog Devices
AD7416, AD7417 and AD7418 temperature monitoring chips.

This driver can also be built as a module. If so, the module
will be called ad7418.

SENSORS_ADCXX

National Semiconductor ADCxxxSxxx

If you say yes here you get support for the National Semiconductor
ADC<bb><c>S<sss> chip family, where
* bb  is the resolution in number of bits (8, 10, 12)
* c   is the number of channels (1, 2, 4, 8)
* sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
kSPS and 101 for 1 MSPS)

Examples : ADC081S101, ADC124S501, ...

This driver can also be built as a module.  If so, the module
will be called adcxx.

SENSORS_ADM1021

Analog Devices ADM1021 and compatibles

If you say yes here you get support for Analog Devices ADM1021
and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.

This driver can also be built as a module.  If so, the module
will be called adm1021.

SENSORS_ADM1025

Analog Devices ADM1025 and compatibles

If you say yes here you get support for Analog Devices ADM1025
and Philips NE1619 sensor chips.

This driver can also be built as a module.  If so, the module
will be called adm1025.

SENSORS_ADM1026

Analog Devices ADM1026 and compatibles

If you say yes here you get support for Analog Devices ADM1026
sensor chip.

This driver can also be built as a module.  If so, the module
will be called adm1026.

SENSORS_ADM1029

Analog Devices ADM1029

If you say yes here you get support for Analog Devices ADM1029
sensor chip.
Very rare chip, please let us know you use it.

This driver can also be built as a module.  If so, the module
will be called adm1029.

SENSORS_ADM1031

Analog Devices ADM1031 and compatibles

If you say yes here you get support for Analog Devices ADM1031
and ADM1030 sensor chips.

This driver can also be built as a module.  If so, the module
will be called adm1031.

SENSORS_ADM9240

Analog Devices ADM9240 and compatibles

If you say yes here you get support for Analog Devices ADM9240,
Dallas DS1780, National Semiconductor LM81 sensor chips.

This driver can also be built as a module.  If so, the module
will be called adm9240.

SENSORS_ADT7411

Analog Devices ADT7411

If you say yes here you get support for the Analog Devices
ADT7411 voltage and temperature monitoring chip.

This driver can also be built as a module. If so, the module
will be called adt7411.

SENSORS_ADT7462

Analog Devices ADT7462

If you say yes here you get support for the Analog Devices
ADT7462 temperature monitoring chips.

This driver can also be built as a module. If so, the module
will be called adt7462.

SENSORS_ADT7470

Analog Devices ADT7470

If you say yes here you get support for the Analog Devices
ADT7470 temperature monitoring chips.

This driver can also be built as a module. If so, the module
will be called adt7470.

SENSORS_ADT7475

Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490

If you say yes here you get support for the Analog Devices
ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
chips.

This driver can also be build as a module.  If so, the module
will be called adt7475.

SENSORS_ASC7621

Andigilog aSC7621

If you say yes here you get support for the aSC7621
family of SMBus sensors chip found on most Intel X38, X48, X58,
945, 965 and 975 desktop boards.  Currently supported chips:
aSC7621
aSC7621a

This driver can also be built as a module.  If so, the module
will be called asc7621.

SENSORS_K8TEMP

AMD Athlon64/FX or Opteron temperature sensor

If you say yes here you get support for the temperature
sensor(s) inside your CPU. Supported is whole AMD K8
microarchitecture. Please note that you will need at least
lm-sensors 2.10.1 for proper userspace support.

This driver can also be built as a module.  If so, the module
will be called k8temp.

SENSORS_K10TEMP

AMD Family 10h+ temperature sensor

If you say yes here you get support for the temperature
sensor(s) inside your CPU. Supported are later revisions of
the AMD Family 10h and all revisions of the AMD Family 11h,
12h (Llano), 14h (Brazos) and 15h (Bulldozer) microarchitectures.

This driver can also be built as a module.  If so, the module
will be called k10temp.

SENSORS_FAM15H_POWER

AMD Family 15h processor power

If you say yes here you get support for processor power
information of your AMD family 15h CPU.

This driver can also be built as a module.  If so, the module
will be called fam15h_power.

SENSORS_ASB100

Asus ASB100 Bach

If you say yes here you get support for the ASB100 Bach sensor
chip found on some Asus mainboards.

This driver can also be built as a module.  If so, the module
will be called asb100.

SENSORS_ATXP1

Attansic ATXP1 VID controller

If you say yes here you get support for the Attansic ATXP1 VID
controller.

If your board have such a chip, you are able to control your CPU
core and other voltages.

This driver can also be built as a module.  If so, the module
will be called atxp1.

SENSORS_DS620

Dallas Semiconductor DS620

If you say yes here you get support for Dallas Semiconductor
DS620 sensor chip.

This driver can also be built as a module.  If so, the module
will be called ds620.

SENSORS_DS1621

Dallas Semiconductor DS1621 and DS1625

If you say yes here you get support for Dallas Semiconductor
DS1621 and DS1625 sensor chips.

This driver can also be built as a module.  If so, the module
will be called ds1621.

SENSORS_I5K_AMB

FB-DIMM AMB temperature sensor on Intel 5000 series chipsets

If you say yes here you get support for FB-DIMM AMB temperature
monitoring chips on systems with the Intel 5000 series chipset.

This driver can also be built as a module. If so, the module
will be called i5k_amb.

SENSORS_F71805F

Fintek F71805F/FG, F71806F/FG and F71872F/FG

If you say yes here you get support for hardware monitoring
features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
Super-I/O chips.

This driver can also be built as a module.  If so, the module
will be called f71805f.

SENSORS_F71882FG

Fintek F71882FG and compatibles

If you say yes here you get support for hardware monitoring
features of many Fintek Super-I/O (LPC) chips. The currently
supported chips are:
F71808E/A
F71858FG
F71862FG
F71863FG
F71869F/E/A
F71882FG
F71883FG
F71889FG/ED/A
F8000
F81801U
F81865F

This driver can also be built as a module.  If so, the module
will be called f71882fg.

SENSORS_F75375S

Fintek F75375S/SP and F75373

If you say yes here you get support for hardware monitoring
features of the Fintek F75375S/SP and F75373

This driver can also be built as a module.  If so, the module
will be called f75375s.

SENSORS_FSCHMD

Fujitsu Siemens Computers sensor chips

If you say yes here you get support for the following Fujitsu
Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
Heimdall, Heracles, Hades and Syleus including support for the
integrated watchdog.

This is a merged driver for FSC sensor chips replacing the fscpos,
fscscy and fscher drivers and adding support for several other FSC
sensor chips.

This driver can also be built as a module.  If so, the module
will be called fschmd.

SENSORS_G760A

GMT G760A

If you say yes here you get support for Global Mixed-mode
Technology Inc G760A fan speed PWM controller chips.

This driver can also be built as a module.  If so, the module
will be called g760a.

SENSORS_GL518SM

Genesys Logic GL518SM

If you say yes here you get support for Genesys Logic GL518SM
sensor chips.

This driver can also be built as a module.  If so, the module
will be called gl518sm.

SENSORS_GL520SM

Genesys Logic GL520SM

If you say yes here you get support for Genesys Logic GL520SM
sensor chips.

This driver can also be built as a module.  If so, the module
will be called gl520sm.

SENSORS_GPIO_FAN

GPIO fan

If you say yes here you get support for fans connected to GPIO lines.

This driver can also be built as a module.  If so, the module
will be called gpio-fan.

SENSORS_CORETEMP

Intel Core/Core2/Atom temperature sensor

If you say yes here you get support for the temperature
sensor inside your CPU. Most of the family 6 CPUs
are supported. Check Documentation/hwmon/coretemp for details.

SENSORS_IBMAEM

IBM Active Energy Manager temperature/power sensors and control

If you say yes here you get support for the temperature and
power sensors and capping hardware in various IBM System X
servers that support Active Energy Manager.  This includes
the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
and certain HC10/HS2x/LS2x/QS2x blades.

This driver can also be built as a module.  If so, the module
will be called ibmaem.

SENSORS_IBMPEX

IBM PowerExecutive temperature/power sensors

If you say yes here you get support for the temperature and
power sensors in various IBM System X servers that support
PowerExecutive.  So far this includes the x3350, x3550, x3650,
x3655, and x3755; the x3800, x3850, and x3950 models that have
PCI Express; and some of the HS2x, LS2x, and QS2x blades.

This driver can also be built as a module.  If so, the module
will be called ibmpex.

SENSORS_IT87

ITE IT87xx and compatibles

If you say yes here you get support for ITE IT8705F, IT8712F,
IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor
chips, and the SiS960 clone.

This driver can also be built as a module.  If so, the module
will be called it87.

SENSORS_JZ4740

Ingenic JZ4740 SoC ADC driver

If you say yes here you get support for reading adc values from the ADCIN
pin on Ingenic JZ4740 SoC based boards.

This driver can also be build as a module. If so, the module will be
called jz4740-hwmon.

SENSORS_JC42

JEDEC JC42.4 compliant memory module temperature sensors

If you say yes here, you get support for JEDEC JC42.4 compliant
temperature sensors, which are used on many DDR3 memory modules for
mobile devices and servers.  Support will include, but not be limited
to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.

This driver can also be built as a module.  If so, the module
will be called jc42.

SENSORS_LINEAGE

Lineage Compact Power Line Power Entry Module

If you say yes here you get support for the Lineage Compact Power Line
series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
CP2000DC, CP2725, and others.

This driver can also be built as a module.  If so, the module
will be called lineage-pem.

SENSORS_LM63

National Semiconductor LM63 and LM64

If you say yes here you get support for the National
Semiconductor LM63 and LM64 remote diode digital temperature
sensors with integrated fan control.  Such chips are found
on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
others.

This driver can also be built as a module.  If so, the module
will be called lm63.

SENSORS_LM70

National Semiconductor LM70 / Texas Instruments TMP121

If you say yes here you get support for the National Semiconductor
LM70 and Texas Instruments TMP121/TMP123 digital temperature
sensor chips.

This driver can also be built as a module.  If so, the module
will be called lm70.

SENSORS_LM73

National Semiconductor LM73

If you say yes here you get support for National Semiconductor LM73
sensor chips.
This driver can also be built as a module.  If so, the module
will be called lm73.

SENSORS_LM75

National Semiconductor LM75 and compatibles

If you say yes here you get support for one common type of
temperature sensor chip, with models including:

- Dallas Semiconductor DS75 and DS1775
- Maxim MAX6625 and MAX6626
- Microchip MCP980x
- National Semiconductor LM75, LM75A
- NXP's LM75A
- ST Microelectronics STDS75
- TelCom (now Microchip) TCN75
- Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
TMP275

This driver supports driver model based binding through board
specific I2C device tables.

It also supports the "legacy" style of driver binding.  To use
that with some chips which don't replicate LM75 quirks exactly,
you may need the "force" module parameter.

This driver can also be built as a module.  If so, the module
will be called lm75.

SENSORS_LM77

National Semiconductor LM77

If you say yes here you get support for National Semiconductor LM77
sensor chips.

This driver can also be built as a module.  If so, the module
will be called lm77.

SENSORS_LM78

National Semiconductor LM78 and compatibles

If you say yes here you get support for National Semiconductor LM78,
LM78-J and LM79.

This driver can also be built as a module.  If so, the module
will be called lm78.

SENSORS_LM80

National Semiconductor LM80

If you say yes here you get support for National Semiconductor
LM80 sensor chips.

This driver can also be built as a module.  If so, the module
will be called lm80.

SENSORS_LM83

National Semiconductor LM83 and compatibles

If you say yes here you get support for National Semiconductor
LM82 and LM83 sensor chips.

This driver can also be built as a module.  If so, the module
will be called lm83.

SENSORS_LM85

National Semiconductor LM85 and compatibles

If you say yes here you get support for National Semiconductor LM85
sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
EMC6D101, EMC6D102, and EMC6D103.

This driver can also be built as a module.  If so, the module
will be called lm85.

SENSORS_LM87

National Semiconductor LM87 and compatibles

If you say yes here you get support for National Semiconductor LM87
and Analog Devices ADM1024 sensor chips.

This driver can also be built as a module.  If so, the module
will be called lm87.

SENSORS_LM90

National Semiconductor LM90 and compatibles

If you say yes here you get support for National Semiconductor LM90,
LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
and Winbond/Nuvoton W83L771W/G/AWG/ASG sensor chips.

This driver can also be built as a module.  If so, the module
will be called lm90.

SENSORS_LM92

National Semiconductor LM92 and compatibles

If you say yes here you get support for National Semiconductor LM92
and Maxim MAX6635 sensor chips.

This driver can also be built as a module.  If so, the module
will be called lm92.

SENSORS_LM93

National Semiconductor LM93 and compatibles

If you say yes here you get support for National Semiconductor LM93,
LM94, and compatible sensor chips.

This driver can also be built as a module.  If so, the module
will be called lm93.

SENSORS_LTC4151

Linear Technology LTC4151

If you say yes here you get support for Linear Technology LTC4151
High Voltage I2C Current and Voltage Monitor interface.

This driver can also be built as a module. If so, the module will
be called ltc4151.

SENSORS_LTC4215

Linear Technology LTC4215

If you say yes here you get support for Linear Technology LTC4215
Hot Swap Controller I2C interface.

This driver can also be built as a module. If so, the module will
be called ltc4215.

SENSORS_LTC4245

Linear Technology LTC4245

If you say yes here you get support for Linear Technology LTC4245
Multiple Supply Hot Swap Controller I2C interface.

This driver can also be built as a module. If so, the module will
be called ltc4245.

SENSORS_LTC4261

Linear Technology LTC4261

If you say yes here you get support for Linear Technology LTC4261
Negative Voltage Hot Swap Controller I2C interface.

This driver can also be built as a module. If so, the module will
be called ltc4261.

SENSORS_LM95241

National Semiconductor LM95241 sensor chip

If you say yes here you get support for LM95241 sensor chip.

This driver can also be built as a module.  If so, the module
will be called lm95241.

SENSORS_MAX1111

Maxim MAX1111 Multichannel, Serial 8-bit ADC chip

Say y here to support Maxim's MAX1111 ADC chips.

This driver can also be built as a module.  If so, the module
will be called max1111.

SENSORS_MAX16065

Maxim MAX16065 System Manager and compatibles

If you say yes here you get support for hardware monitoring
capabilities of the following Maxim System Manager chips.
MAX16065
MAX16066
MAX16067
MAX16068
MAX16070
MAX16071

This driver can also be built as a module.  If so, the module
will be called max16065.

SENSORS_MAX1619

Maxim MAX1619 sensor chip

If you say yes here you get support for MAX1619 sensor chip.

This driver can also be built as a module.  If so, the module
will be called max1619.

SENSORS_MAX6639

Maxim MAX6639 sensor chip

If you say yes here you get support for the MAX6639
sensor chips.

This driver can also be built as a module.  If so, the module
will be called max6639.

SENSORS_MAX6642

Maxim MAX6642 sensor chip

If you say yes here you get support for MAX6642 sensor chip.
MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
with Overtemperature Alarm from Maxim.

This driver can also be built as a module.  If so, the module
will be called max6642.

SENSORS_MAX6650

Maxim MAX6650 sensor chip

If you say yes here you get support for the MAX6650 / MAX6651
sensor chips.

This driver can also be built as a module.  If so, the module
will be called max6650.

SENSORS_PC87360

National Semiconductor PC87360 family

If you say yes here you get access to the hardware monitoring
functions of the National Semiconductor PC8736x Super-I/O chips.
The PC87360, PC87363 and PC87364 only have fan monitoring and
control.  The PC87365 and PC87366 additionally have voltage and
temperature monitoring.

This driver can also be built as a module.  If so, the module
will be called pc87360.

SENSORS_PC87427

National Semiconductor PC87427

If you say yes here you get access to the hardware monitoring
functions of the National Semiconductor PC87427 Super-I/O chip.
The chip has two distinct logical devices, one for fan speed
monitoring and control, and one for voltage and temperature
monitoring. Fan speed monitoring and control are supported, as
well as temperature monitoring. Voltages aren't supported yet.

This driver can also be built as a module.  If so, the module
will be called pc87427.

SENSORS_PCF8591

Philips PCF8591 ADC/DAC

If you say yes here you get support for Philips PCF8591 4-channel
ADC, 1-channel DAC chips.

This driver can also be built as a module.  If so, the module
will be called pcf8591.

These devices are hard to detect and rarely found on mainstream
hardware.  If unsure, say N.

PMBUS

PMBus support

Say yes here if you want to enable PMBus support.

This driver can also be built as a module. If so, the module will
be called pmbus_core.

SENSORS_PMBUS

Generic PMBus devices

If you say yes here you get hardware monitoring support for generic
PMBus devices, including but not limited to BMR450, BMR451, BMR453,
BMR454, and LTC2978.

This driver can also be built as a module. If so, the module will
be called pmbus.

SENSORS_ADM1275

Analog Devices ADM1275

If you say yes here you get hardware monitoring support for Analog
Devices ADM1275 Hot-Swap Controller and Digital Power Monitor.

This driver can also be built as a module. If so, the module will
be called adm1275.

SENSORS_MAX16064

Maxim MAX16064

If you say yes here you get hardware monitoring support for Maxim
MAX16064.

This driver can also be built as a module. If so, the module will
be called max16064.

SENSORS_MAX34440

Maxim MAX34440/MAX34441

If you say yes here you get hardware monitoring support for Maxim
MAX34440 and MAX34441.

This driver can also be built as a module. If so, the module will
be called max34440.

SENSORS_MAX8688

Maxim MAX8688

If you say yes here you get hardware monitoring support for Maxim
MAX8688.

This driver can also be built as a module. If so, the module will
be called max8688.

SENSORS_UCD9000

TI UCD90120, UCD90124, UCD9090, UCD90910

If you say yes here you get hardware monitoring support for TI
UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
Controllers.

This driver can also be built as a module. If so, the module will
be called ucd9000.

SENSORS_UCD9200

TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248

If you say yes here you get hardware monitoring support for TI
UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
Digital PWM System Controllers.

This driver can also be built as a module. If so, the module will
be called ucd9200.

SENSORS_SHT15

Sensiron humidity and temperature sensors. SHT15 and compat.

If you say yes here you get support for the Sensiron SHT10, SHT11,
SHT15, SHT71, SHT75 humidity and temperature sensors.

This driver can also be built as a module.  If so, the module
will be called sht15.

SENSORS_SHT21

Sensiron humidity and temperature sensors. SHT21 and compat.

If you say yes here you get support for the Sensiron SHT21, SHT25
humidity and temperature sensors.

This driver can also be built as a module.  If so, the module
will be called sht21.

SENSORS_S3C

Samsung built-in ADC

If you say yes here you get support for the on-board ADCs of
the Samsung S3C24XX, S3C64XX and other series of SoC

This driver can also be built as a module. If so, the module
will be called s3c-hwmon.

SENSORS_S3C_RAW

Include raw channel attributes in sysfs

Say Y here if you want to include raw copies of all the ADC
channels in sysfs.

SENSORS_SIS5595

Silicon Integrated Systems Corp. SiS5595

If you say yes here you get support for the integrated sensors in
SiS5595 South Bridges.

This driver can also be built as a module.  If so, the module
will be called sis5595.

SENSORS_SMM665

Summit Microelectronics SMM665

If you say yes here you get support for the hardware monitoring
features of the Summit Microelectronics SMM665/SMM665B Six-Channel
Active DC Output Controller / Monitor.

Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
Support for those chips is untested.

This driver can also be built as a module. If so, the module will
be called smm665.

SENSORS_DME1737

SMSC DME1737, SCH311x and compatibles

If you say yes here you get support for the hardware monitoring
and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
Asus A8000 Super-I/O chips.

This driver can also be built as a module.  If so, the module
will be called dme1737.

SENSORS_EMC1403

SMSC EMC1403/23 thermal sensor

If you say yes here you get support for the SMSC EMC1403/23
temperature monitoring chip.

Threshold values can be configured using sysfs.
Data from the different diodes are accessible via sysfs.

SENSORS_EMC2103

SMSC EMC2103

If you say yes here you get support for the temperature
and fan sensors of the SMSC EMC2103 chips.

This driver can also be built as a module.  If so, the module
will be called emc2103.

SENSORS_EMC6W201

SMSC EMC6W201

If you say yes here you get support for the SMSC EMC6W201
hardware monitoring chip.

This driver can also be built as a module.  If so, the module
will be called emc6w201.

SENSORS_SMSC47M1

SMSC LPC47M10x and compatibles

If you say yes here you get support for the integrated fan
monitoring and control capabilities of the SMSC LPC47B27x,
LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
LPC47M192, LPC47M292 and LPC47M997 chips.

The temperature and voltage sensor features of the LPC47M15x,
LPC47M192, LPC47M292 and LPC47M997 are supported by another
driver, select also "SMSC LPC47M192 and compatibles" below for
those.

This driver can also be built as a module.  If so, the module
will be called smsc47m1.

SENSORS_SMSC47M192

SMSC LPC47M192 and compatibles

If you say yes here you get support for the temperature and
voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
and LPC47M997 chips.

The fan monitoring and control capabilities of these chips
are supported by another driver, select
"SMSC LPC47M10x and compatibles" above. You need both drivers
if you want fan control and voltage/temperature sensor support.

This driver can also be built as a module.  If so, the module
will be called smsc47m192.

SENSORS_SMSC47B397

SMSC LPC47B397-NC

If you say yes here you get support for the SMSC LPC47B397-NC
sensor chip.

This driver can also be built as a module.  If so, the module
will be called smsc47b397.

SENSORS_SCH5627

SMSC SCH5627

If you say yes here you get support for the hardware monitoring
features of the SMSC SCH5627 Super-I/O chip.

This driver can also be built as a module.  If so, the module
will be called sch5627.

SENSORS_ADS1015

Texas Instruments ADS1015

If you say yes here you get support for Texas Instruments ADS1015
12-bit 4-input ADC device.

This driver can also be built as a module.  If so, the module
will be called ads1015.

SENSORS_ADS7828

Texas Instruments ADS7828

If you say yes here you get support for Texas Instruments ADS7828
12-bit 8-channel ADC device.

This driver can also be built as a module.  If so, the module
will be called ads7828.

SENSORS_ADS7871

Texas Instruments ADS7871 A/D converter

If you say yes here you get support for TI ADS7871 & ADS7870

This driver can also be built as a module.  If so, the module
will be called ads7871.

SENSORS_AMC6821

Texas Instruments AMC6821

If you say yes here you get support for the Texas Instruments
AMC6821 hardware monitoring chips.

This driver can also be build as a module.  If so, the module
will be called amc6821.

SENSORS_THMC50

Texas Instruments THMC50 / Analog Devices ADM1022

If you say yes here you get support for Texas Instruments THMC50
sensor chips and clones: the Analog Devices ADM1022.

This driver can also be built as a module.  If so, the module
will be called thmc50.

SENSORS_TMP102

Texas Instruments TMP102

If you say yes here you get support for Texas Instruments TMP102
sensor chips.

This driver can also be built as a module.  If so, the module
will be called tmp102.

SENSORS_TMP401

Texas Instruments TMP401 and compatibles

If you say yes here you get support for Texas Instruments TMP401 and
TMP411 temperature sensor chips.

This driver can also be built as a module.  If so, the module
will be called tmp401.

SENSORS_TMP421

Texas Instruments TMP421 and compatible

If you say yes here you get support for Texas Instruments TMP421,
TMP422 and TMP423 temperature sensor chips.

This driver can also be built as a module.  If so, the module
will be called tmp421.

SENSORS_TWL4030_MADC

Texas Instruments TWL4030 MADC Hwmon

If you say yes here you get hwmon support for triton
TWL4030-MADC.

This driver can also be built as a module. If so it will be called
twl4030-madc-hwmon.

SENSORS_VIA_CPUTEMP

VIA CPU temperature sensor

If you say yes here you get support for the temperature
sensor inside your CPU. Supported are all known variants of
the VIA C7 and Nano.

SENSORS_VIA686A

VIA686A

If you say yes here you get support for the integrated sensors in
Via 686A/B South Bridges.

This driver can also be built as a module.  If so, the module
will be called via686a.

SENSORS_VT1211

VIA VT1211

If you say yes here then you get support for hardware monitoring
features of the VIA VT1211 Super-I/O chip.

This driver can also be built as a module.  If so, the module
will be called vt1211.

SENSORS_VT8231

VIA VT8231

If you say yes here then you get support for the integrated sensors
in the VIA VT8231 device.

This driver can also be built as a module.  If so, the module
will be called vt8231.

SENSORS_W83781D

Winbond W83781D, W83782D, W83783S, Asus AS99127F

If you say yes here you get support for the Winbond W8378x series
of sensor chips: the W83781D, W83782D and W83783S, and the similar
Asus AS99127F.

This driver can also be built as a module.  If so, the module
will be called w83781d.

SENSORS_W83791D

Winbond W83791D

If you say yes here you get support for the Winbond W83791D chip.

This driver can also be built as a module.  If so, the module
will be called w83791d.

SENSORS_W83792D

Winbond W83792D

If you say yes here you get support for the Winbond W83792D chip.

This driver can also be built as a module.  If so, the module
will be called w83792d.

SENSORS_W83793

Winbond W83793

If you say yes here you get support for the Winbond W83793
hardware monitoring chip, including support for the integrated
watchdog.

This driver can also be built as a module.  If so, the module
will be called w83793.

SENSORS_W83795

Winbond/Nuvoton W83795G/ADG

If you say yes here you get support for the Winbond W83795G and
W83795ADG hardware monitoring chip.

This driver can also be built as a module.  If so, the module
will be called w83795.

SENSORS_W83795_FANCTRL

Include fan control support (DANGEROUS)

If you say yes here, support for the both manual and automatic
fan control features will be included in the driver.

This part of the code wasn't carefully reviewed and tested yet,
so enabling this option is strongly discouraged on production
servers. Only developers and testers should enable it for the
time being.

Please also note that this option will create sysfs attribute
files which may change in the future, so you shouldn't rely
on them being stable.

SENSORS_W83L785TS

Winbond W83L785TS-S

If you say yes here you get support for the Winbond W83L785TS-S
sensor chip, which is used on the Asus A7N8X, among other
motherboards.

This driver can also be built as a module.  If so, the module
will be called w83l785ts.

SENSORS_W83L786NG

Winbond W83L786NG, W83L786NR

If you say yes here you get support for the Winbond W83L786NG
and W83L786NR sensor chips.

This driver can also be built as a module.  If so, the module
will be called w83l786ng.

SENSORS_W83627HF

Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF

If you say yes here you get support for the Winbond W836X7 series
of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
W83697HF.

This driver can also be built as a module.  If so, the module
will be called w83627hf.

SENSORS_W83627EHF

Winbond W83627EHF/EHG/DHG, W83667HG, NCT6775F, NCT6776F

If you say yes here you get support for the hardware
monitoring functionality of the Winbond W83627EHF Super-I/O chip.

This driver also supports the W83627EHG, which is the lead-free
version of the W83627EHF, and the W83627DHG, which is a similar
chip suited for specific Intel processors that use PECI such as
the Core 2 Duo.

This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
(also known as W83667HG-I), and NCT6776F.

This driver can also be built as a module.  If so, the module
will be called w83627ehf.

SENSORS_WM831X

WM831x PMICs

If you say yes here you get support for the hardware
monitoring functionality of the Wolfson Microelectronics
WM831x series of PMICs.

This driver can also be built as a module.  If so, the module
will be called wm831x-hwmon.

SENSORS_WM8350

Wolfson Microelectronics WM835x

If you say yes here you get support for the hardware
monitoring features of the WM835x series of PMICs.

This driver can also be built as a module.  If so, the module
will be called wm8350-hwmon.

SENSORS_ULTRA45

Sun Ultra45 PIC16F747

This driver provides support for the Ultra45 workstation environmental
sensors.

SENSORS_APPLESMC

Apple SMC (Motion sensor, light sensor, keyboard backlight)

This driver provides support for the Apple System Management
Controller, which provides an accelerometer (Apple Sudden Motion
Sensor), light sensors, temperature sensors, keyboard backlight
control and fan control.

Only Intel-based Apple's computers are supported (MacBook Pro,
MacBook, MacMini).

Data from the different sensors, keyboard backlight control and fan
control are accessible via sysfs.

This driver also provides an absolute input class device, allowing
the laptop to act as a pinball machine-esque joystick.

Say Y here if you have an applicable laptop and want to experience
the awesome power of applesmc.

SENSORS_MC13783_ADC

Freescale MC13783 ADC

Support for the A/D converter on MC13783 PMIC.

ACPI drivers

SENSORS_ACPI_POWER

ACPI 4.0 power meter

This driver exposes ACPI 4.0 power meters as hardware monitoring
devices.  Say Y (or M) if you have a computer with ACPI 4.0 firmware
and a power meter.

To compile this driver as a module, choose M here:
the module will be called acpi_power_meter.

SENSORS_ATK0110

ASUS ATK0110

If you say yes here you get support for the ACPI hardware
monitoring interface found in many ASUS motherboards. This
driver will provide readings of fans, voltages and temperatures
through the system firmware.

This driver can also be built as a module. If so, the module
will be called asus_atk0110.