struct usb_ep — device side representation of USB endpoint
struct usb_ep { void * driver_data; const char * name; const struct usb_ep_ops * ops; struct list_head ep_list; struct usb_ep_caps caps; unsigned maxpacket:16; unsigned maxpacket_limit:16; unsigned max_streams:16; unsigned mult:2; unsigned maxburst:5; u8 address; const struct usb_endpoint_descriptor * desc; const struct usb_ss_ep_comp_descriptor * comp_desc; };
void * driver_data
for use by the gadget driver.
const char * name
identifier for the endpoint, such as “ep-a” or “ep9in-bulk”
const struct usb_ep_ops * ops
Function pointers used to access hardware-specific operations.
struct list_head ep_list
the gadget's ep_list holds all of its endpoints
struct usb_ep_caps caps
The structure describing types and directions supported by endoint.
unsigned:16 maxpacket
The maximum packet size used on this endpoint. The initial value can sometimes be reduced (hardware allowing), according to the endpoint descriptor used to configure the endpoint.
unsigned:16 maxpacket_limit
The maximum packet size value which can be handled by this endpoint. It's set once by UDC driver when endpoint is initialized, and should not be changed. Should not be confused with maxpacket.
unsigned:16 max_streams
The maximum number of streams supported by this EP (0 - 16, actual number is 2^n)
unsigned:2 mult
multiplier, 'mult' value for SS Isoc EPs
unsigned:5 maxburst
the maximum number of bursts supported by this EP (for usb3)
u8 address
used to identify the endpoint when finding descriptor that matches connection speed
const struct usb_endpoint_descriptor * desc
endpoint descriptor. This pointer is set before the endpoint is enabled and remains valid until the endpoint is disabled.
const struct usb_ss_ep_comp_descriptor * comp_desc
In case of SuperSpeed support, this is the endpoint companion descriptor that is used to configure the endpoint