Memory Management APIs¶
User Space Memory Access¶
-
get_user¶
get_user (x, ptr)
Get a simple variable from user space.
Parameters
x
Variable to store result.
ptr
Source address, in user space.
Context
User context only. This function may sleep if pagefaults are enabled.
Description
This macro copies a single simple variable from user space to kernel space. It supports simple types like char and int, but not larger data types like structures or arrays.
ptr must have pointer-to-simple-variable type, and the result of dereferencing ptr must be assignable to x without a cast.
Return
zero on success, or -EFAULT on error. On error, the variable x is set to zero.
-
__get_user¶
__get_user (x, ptr)
Get a simple variable from user space, with less checking.
Parameters
x
Variable to store result.
ptr
Source address, in user space.
Context
User context only. This function may sleep if pagefaults are enabled.
Description
This macro copies a single simple variable from user space to kernel space. It supports simple types like char and int, but not larger data types like structures or arrays.
ptr must have pointer-to-simple-variable type, and the result of dereferencing ptr must be assignable to x without a cast.
Caller must check the pointer with access_ok() before calling this function.
Return
zero on success, or -EFAULT on error. On error, the variable x is set to zero.
-
put_user¶
put_user (x, ptr)
Write a simple value into user space.
Parameters
x
Value to copy to user space.
ptr
Destination address, in user space.
Context
User context only. This function may sleep if pagefaults are enabled.
Description
This macro copies a single simple value from kernel space to user space. It supports simple types like char and int, but not larger data types like structures or arrays.
ptr must have pointer-to-simple-variable type, and x must be assignable to the result of dereferencing ptr.
Return
zero on success, or -EFAULT on error.
-
__put_user¶
__put_user (x, ptr)
Write a simple value into user space, with less checking.
Parameters
x
Value to copy to user space.
ptr
Destination address, in user space.
Context
User context only. This function may sleep if pagefaults are enabled.
Description
This macro copies a single simple value from kernel space to user space. It supports simple types like char and int, but not larger data types like structures or arrays.
ptr must have pointer-to-simple-variable type, and x must be assignable to the result of dereferencing ptr.
Caller must check the pointer with access_ok() before calling this function.
Return
zero on success, or -EFAULT on error.
-
unsigned long clear_user(void __user *to, unsigned long n)¶
Zero a block of memory in user space.
Parameters
void __user *to
Destination address, in user space.
unsigned long n
Number of bytes to zero.
Description
Zero a block of memory in user space.
Return
number of bytes that could not be cleared. On success, this will be zero.
-
unsigned long __clear_user(void __user *to, unsigned long n)¶
Zero a block of memory in user space, with less checking.
Parameters
void __user *to
Destination address, in user space.
unsigned long n
Number of bytes to zero.
Description
Zero a block of memory in user space. Caller must check the specified block with access_ok() before calling this function.
Return
number of bytes that could not be cleared. On success, this will be zero.
-
int get_user_pages_fast(unsigned long start, int nr_pages, unsigned int gup_flags, struct page **pages)¶
pin user pages in memory
Parameters
unsigned long start
starting user address
int nr_pages
number of pages from start to pin
unsigned int gup_flags
flags modifying pin behaviour
struct page **pages
array that receives pointers to the pages pinned. Should be at least nr_pages long.
Description
Attempt to pin user pages in memory without taking mm->mmap_lock. If not successful, it will fall back to taking the lock and calling get_user_pages().
Returns number of pages pinned. This may be fewer than the number requested. If nr_pages is 0 or negative, returns 0. If no pages were pinned, returns -errno.
Memory Allocation Controls¶
Page mobility and placement hints¶
These flags provide hints about how mobile the page is. Pages with similar mobility are placed within the same pageblocks to minimise problems due to external fragmentation.
__GFP_MOVABLE
(also a zone modifier) indicates that the page can be
moved by page migration during memory compaction or can be reclaimed.
__GFP_RECLAIMABLE
is used for slab allocations that specify
SLAB_RECLAIM_ACCOUNT and whose pages can be freed via shrinkers.
__GFP_WRITE
indicates the caller intends to dirty the page. Where possible,
these pages will be spread between local zones to avoid all the dirty
pages being in one zone (fair zone allocation policy).
__GFP_HARDWALL
enforces the cpuset memory allocation policy.
__GFP_THISNODE
forces the allocation to be satisfied from the requested
node with no fallbacks or placement policy enforcements.
__GFP_ACCOUNT
causes the allocation to be accounted to kmemcg.
Watermark modifiers -- controls access to emergency reserves¶
__GFP_HIGH
indicates that the caller is high-priority and that granting
the request is necessary before the system can make forward progress.
For example creating an IO context to clean pages and requests
from atomic context.
__GFP_MEMALLOC
allows access to all memory. This should only be used when
the caller guarantees the allocation will allow more memory to be freed
very shortly e.g. process exiting or swapping. Users either should
be the MM or co-ordinating closely with the VM (e.g. swap over NFS).
Users of this flag have to be extremely careful to not deplete the reserve
completely and implement a throttling mechanism which controls the
consumption of the reserve based on the amount of freed memory.
Usage of a pre-allocated pool (e.g. mempool) should be always considered
before using this flag.
__GFP_NOMEMALLOC
is used to explicitly forbid access to emergency reserves.
This takes precedence over the __GFP_MEMALLOC
flag if both are set.
Reclaim modifiers¶
Please note that all the following flags are only applicable to sleepable
allocations (e.g. GFP_NOWAIT
and GFP_ATOMIC
will ignore them).
__GFP_IO
can start physical IO.
__GFP_FS
can call down to the low-level FS. Clearing the flag avoids the
allocator recursing into the filesystem which might already be holding
locks.
__GFP_DIRECT_RECLAIM
indicates that the caller may enter direct reclaim.
This flag can be cleared to avoid unnecessary delays when a fallback
option is available.
__GFP_KSWAPD_RECLAIM
indicates that the caller wants to wake kswapd when
the low watermark is reached and have it reclaim pages until the high
watermark is reached. A caller may wish to clear this flag when fallback
options are available and the reclaim is likely to disrupt the system. The
canonical example is THP allocation where a fallback is cheap but
reclaim/compaction may cause indirect stalls.
__GFP_RECLAIM
is shorthand to allow/forbid both direct and kswapd reclaim.
The default allocator behavior depends on the request size. We have a concept
of so-called costly allocations (with order > PAGE_ALLOC_COSTLY_ORDER
).
!costly allocations are too essential to fail so they are implicitly
non-failing by default (with some exceptions like OOM victims might fail so
the caller still has to check for failures) while costly requests try to be
not disruptive and back off even without invoking the OOM killer.
The following three modifiers might be used to override some of these
implicit rules.
__GFP_NORETRY
: The VM implementation will try only very lightweight
memory direct reclaim to get some memory under memory pressure (thus
it can sleep). It will avoid disruptive actions like OOM killer. The
caller must handle the failure which is quite likely to happen under
heavy memory pressure. The flag is suitable when failure can easily be
handled at small cost, such as reduced throughput.
__GFP_RETRY_MAYFAIL
: The VM implementation will retry memory reclaim
procedures that have previously failed if there is some indication
that progress has been made elsewhere. It can wait for other
tasks to attempt high-level approaches to freeing memory such as
compaction (which removes fragmentation) and page-out.
There is still a definite limit to the number of retries, but it is
a larger limit than with __GFP_NORETRY
.
Allocations with this flag may fail, but only when there is
genuinely little unused memory. While these allocations do not
directly trigger the OOM killer, their failure indicates that
the system is likely to need to use the OOM killer soon. The
caller must handle failure, but can reasonably do so by failing
a higher-level request, or completing it only in a much less
efficient manner.
If the allocation does fail, and the caller is in a position to
free some non-essential memory, doing so could benefit the system
as a whole.
__GFP_NOFAIL
: The VM implementation _must_ retry infinitely: the caller
cannot handle allocation failures. The allocation could block
indefinitely but will never return with failure. Testing for
failure is pointless.
New users should be evaluated carefully (and the flag should be
used only when there is no reasonable failure policy) but it is
definitely preferable to use the flag rather than opencode endless
loop around allocator.
Using this flag for costly allocations is _highly_ discouraged.
Useful GFP flag combinations¶
Useful GFP flag combinations that are commonly used. It is recommended
that subsystems start with one of these combinations and then set/clear
__GFP_FOO
flags as necessary.
GFP_ATOMIC
users can not sleep and need the allocation to succeed. A lower
watermark is applied to allow access to "atomic reserves".
The current implementation doesn't support NMI and few other strict
non-preemptive contexts (e.g. raw_spin_lock). The same applies to GFP_NOWAIT
.
GFP_KERNEL
is typical for kernel-internal allocations. The caller requires
ZONE_NORMAL
or a lower zone for direct access but can direct reclaim.
GFP_KERNEL_ACCOUNT
is the same as GFP_KERNEL, except the allocation is
accounted to kmemcg.
GFP_NOWAIT
is for kernel allocations that should not stall for direct
reclaim, start physical IO or use any filesystem callback. It is very
likely to fail to allocate memory, even for very small allocations.
GFP_NOIO
will use direct reclaim to discard clean pages or slab pages
that do not require the starting of any physical IO.
Please try to avoid using this flag directly and instead use
memalloc_noio_{save,restore} to mark the whole scope which cannot
perform any IO with a short explanation why. All allocation requests
will inherit GFP_NOIO implicitly.
GFP_NOFS
will use direct reclaim but will not use any filesystem interfaces.
Please try to avoid using this flag directly and instead use
memalloc_nofs_{save,restore} to mark the whole scope which cannot/shouldn't
recurse into the FS layer with a short explanation why. All allocation
requests will inherit GFP_NOFS implicitly.
GFP_USER
is for userspace allocations that also need to be directly
accessibly by the kernel or hardware. It is typically used by hardware
for buffers that are mapped to userspace (e.g. graphics) that hardware
still must DMA to. cpuset limits are enforced for these allocations.
GFP_DMA
exists for historical reasons and should be avoided where possible.
The flags indicates that the caller requires that the lowest zone be
used (ZONE_DMA
or 16M on x86-64). Ideally, this would be removed but
it would require careful auditing as some users really require it and
others use the flag to avoid lowmem reserves in ZONE_DMA
and treat the
lowest zone as a type of emergency reserve.
GFP_DMA32
is similar to GFP_DMA
except that the caller requires a 32-bit
address. Note that kmalloc(..., GFP_DMA32) does not return DMA32 memory
because the DMA32 kmalloc cache array is not implemented.
(Reason: there is no such user in kernel).
GFP_HIGHUSER
is for userspace allocations that may be mapped to userspace,
do not need to be directly accessible by the kernel but that cannot
move once in use. An example may be a hardware allocation that maps
data directly into userspace but has no addressing limitations.
GFP_HIGHUSER_MOVABLE
is for userspace allocations that the kernel does not
need direct access to but can use kmap()
when access is required. They
are expected to be movable via page reclaim or page migration. Typically,
pages on the LRU would also be allocated with GFP_HIGHUSER_MOVABLE
.
GFP_TRANSHUGE
and GFP_TRANSHUGE_LIGHT
are used for THP allocations. They
are compound allocations that will generally fail quickly if memory is not
available and will not wake kswapd/kcompactd on failure. The _LIGHT
version does not attempt reclaim/compaction at all and is by default used
in page fault path, while the non-light is used by khugepaged.
The Slab Cache¶
-
size_t ksize(const void *objp)¶
Report actual allocation size of associated object
Parameters
const void *objp
Pointer returned from a prior
kmalloc()
-family allocation.
Description
This should not be used for writing beyond the originally requested
allocation size. Either use krealloc()
or round up the allocation size
with kmalloc_size_roundup()
prior to allocation. If this is used to
access beyond the originally requested allocation size, UBSAN_BOUNDS
and/or FORTIFY_SOURCE may trip, since they only know about the
originally allocated size via the __alloc_size attribute.
-
void *kmem_cache_alloc(struct kmem_cache *cachep, gfp_t flags)¶
Allocate an object
Parameters
struct kmem_cache *cachep
The cache to allocate from.
gfp_t flags
See
kmalloc()
.
Description
Allocate an object from this cache. See kmem_cache_zalloc() for a shortcut of adding __GFP_ZERO to flags.
Return
pointer to the new object or NULL
in case of error
-
void *kmalloc(size_t size, gfp_t flags)¶
allocate kernel memory
Parameters
size_t size
how many bytes of memory are required.
gfp_t flags
describe the allocation context
Description
kmalloc is the normal method of allocating memory for objects smaller than page size in the kernel.
The allocated object address is aligned to at least ARCH_KMALLOC_MINALIGN bytes. For size of power of two bytes, the alignment is also guaranteed to be at least to the size.
The flags argument may be one of the GFP flags defined at include/linux/gfp_types.h and described at Documentation/core-api/mm-api.rst
The recommended usage of the flags is described at Documentation/core-api/memory-allocation.rst
Below is a brief outline of the most useful GFP flags
GFP_KERNEL
Allocate normal kernel ram. May sleep.
GFP_NOWAIT
Allocation will not sleep.
GFP_ATOMIC
Allocation will not sleep. May use emergency pools.
Also it is possible to set different flags by OR'ing in one or more of the following additional flags:
__GFP_ZERO
Zero the allocated memory before returning. Also see
kzalloc()
.__GFP_HIGH
This allocation has high priority and may use emergency pools.
__GFP_NOFAIL
Indicate that this allocation is in no way allowed to fail (think twice before using).
__GFP_NORETRY
If memory is not immediately available, then give up at once.
__GFP_NOWARN
If allocation fails, don't issue any warnings.
__GFP_RETRY_MAYFAIL
Try really hard to succeed the allocation but fail eventually.
-
void *kmalloc_array(size_t n, size_t size, gfp_t flags)¶
allocate memory for an array.
Parameters
size_t n
number of elements.
size_t size
element size.
gfp_t flags
the type of memory to allocate (see kmalloc).
-
void *krealloc_array(void *p, size_t new_n, size_t new_size, gfp_t flags)¶
reallocate memory for an array.
Parameters
void *p
pointer to the memory chunk to reallocate
size_t new_n
new number of elements to alloc
size_t new_size
new size of a single member of the array
gfp_t flags
the type of memory to allocate (see kmalloc)
-
void *kcalloc(size_t n, size_t size, gfp_t flags)¶
allocate memory for an array. The memory is set to zero.
Parameters
size_t n
number of elements.
size_t size
element size.
gfp_t flags
the type of memory to allocate (see kmalloc).
-
void *kzalloc(size_t size, gfp_t flags)¶
allocate memory. The memory is set to zero.
Parameters
size_t size
how many bytes of memory are required.
gfp_t flags
the type of memory to allocate (see kmalloc).
-
void *kzalloc_node(size_t size, gfp_t flags, int node)¶
allocate zeroed memory from a particular memory node.
Parameters
size_t size
how many bytes of memory are required.
gfp_t flags
the type of memory to allocate (see kmalloc).
int node
memory node from which to allocate
-
size_t kmalloc_size_roundup(size_t size)¶
Report allocation bucket size for the given size
Parameters
size_t size
Number of bytes to round up from.
Description
This returns the number of bytes that would be available in a kmalloc()
allocation of size bytes. For example, a 126 byte request would be
rounded up to the next sized kmalloc bucket, 128 bytes. (This is strictly
for the general-purpose kmalloc()
-based allocations, and is not for the
pre-sized kmem_cache_alloc()
-based allocations.)
Use this to kmalloc()
the full bucket size ahead of time instead of using
ksize()
to query the size after an allocation.
-
void *kmem_cache_alloc_node(struct kmem_cache *s, gfp_t gfpflags, int node)¶
Allocate an object on the specified node
Parameters
struct kmem_cache *s
The cache to allocate from.
gfp_t gfpflags
See
kmalloc()
.int node
node number of the target node.
Description
Identical to kmem_cache_alloc but it will allocate memory on the given node, which can improve the performance for cpu bound structures.
Fallback to other node is possible if __GFP_THISNODE is not set.
Return
pointer to the new object or NULL
in case of error
-
void kmem_cache_free(struct kmem_cache *s, void *x)¶
Deallocate an object
Parameters
struct kmem_cache *s
The cache the allocation was from.
void *x
The previously allocated object.
Description
Free an object which was previously allocated from this cache.
-
void kfree(const void *object)¶
free previously allocated memory
Parameters
const void *object
pointer returned by
kmalloc()
orkmem_cache_alloc()
Description
If object is NULL, no operation is performed.
-
struct kmem_cache *kmem_cache_create_usercopy(const char *name, unsigned int size, unsigned int align, slab_flags_t flags, unsigned int useroffset, unsigned int usersize, void (*ctor)(void*))¶
Create a cache with a region suitable for copying to userspace
Parameters
const char *name
A string which is used in /proc/slabinfo to identify this cache.
unsigned int size
The size of objects to be created in this cache.
unsigned int align
The required alignment for the objects.
slab_flags_t flags
SLAB flags
unsigned int useroffset
Usercopy region offset
unsigned int usersize
Usercopy region size
void (*ctor)(void *)
A constructor for the objects.
Description
Cannot be called within a interrupt, but can be interrupted. The ctor is run when new pages are allocated by the cache.
The flags are
SLAB_POISON
- Poison the slab with a known test pattern (a5a5a5a5)
to catch references to uninitialised memory.
SLAB_RED_ZONE
- Insert Red zones around the allocated memory to check
for buffer overruns.
SLAB_HWCACHE_ALIGN
- Align the objects in this cache to a hardware
cacheline. This can be beneficial if you're counting cycles as closely
as davem.
Return
a pointer to the cache on success, NULL on failure.
-
struct kmem_cache *kmem_cache_create(const char *name, unsigned int size, unsigned int align, slab_flags_t flags, void (*ctor)(void*))¶
Create a cache.
Parameters
const char *name
A string which is used in /proc/slabinfo to identify this cache.
unsigned int size
The size of objects to be created in this cache.
unsigned int align
The required alignment for the objects.
slab_flags_t flags
SLAB flags
void (*ctor)(void *)
A constructor for the objects.
Description
Cannot be called within a interrupt, but can be interrupted. The ctor is run when new pages are allocated by the cache.
The flags are
SLAB_POISON
- Poison the slab with a known test pattern (a5a5a5a5)
to catch references to uninitialised memory.
SLAB_RED_ZONE
- Insert Red zones around the allocated memory to check
for buffer overruns.
SLAB_HWCACHE_ALIGN
- Align the objects in this cache to a hardware
cacheline. This can be beneficial if you're counting cycles as closely
as davem.
Return
a pointer to the cache on success, NULL on failure.
-
int kmem_cache_shrink(struct kmem_cache *cachep)¶
Shrink a cache.
Parameters
struct kmem_cache *cachep
The cache to shrink.
Description
Releases as many slabs as possible for a cache. To help debugging, a zero exit status indicates all slabs were released.
Return
0
if all slabs were released, non-zero otherwise
-
bool kmem_dump_obj(void *object)¶
Print available slab provenance information
Parameters
void *object
slab object for which to find provenance information.
Description
This function uses pr_cont()
, so that the caller is expected to have
printed out whatever preamble is appropriate. The provenance information
depends on the type of object and on how much debugging is enabled.
For a slab-cache object, the fact that it is a slab object is printed,
and, if available, the slab name, return address, and stack trace from
the allocation and last free path of that object.
Return
true
if the pointer is to a not-yet-freed object from
kmalloc()
or kmem_cache_alloc()
, either true
or false
if the pointer
is to an already-freed object, and false
otherwise.
-
void *krealloc(const void *p, size_t new_size, gfp_t flags)¶
reallocate memory. The contents will remain unchanged.
Parameters
const void *p
object to reallocate memory for.
size_t new_size
how many bytes of memory are required.
gfp_t flags
the type of memory to allocate.
Description
The contents of the object pointed to are preserved up to the
lesser of the new and old sizes (__GFP_ZERO flag is effectively ignored).
If p is NULL
, krealloc()
behaves exactly like kmalloc()
. If new_size
is 0 and p is not a NULL
pointer, the object pointed to is freed.
Return
pointer to the allocated memory or NULL
in case of error
-
void kfree_sensitive(const void *p)¶
Clear sensitive information in memory before freeing
Parameters
const void *p
object to free memory of
Description
The memory of the object p points to is zeroed before freed.
If p is NULL
, kfree_sensitive()
does nothing.
Note
this function zeroes the whole allocated buffer which can be a good
deal bigger than the requested buffer size passed to kmalloc()
. So be
careful when using this function in performance sensitive code.
-
void kfree_const(const void *x)¶
conditionally free memory
Parameters
const void *x
pointer to the memory
Description
Function calls kfree only if x is not in .rodata section.
-
void *kvmalloc_node(size_t size, gfp_t flags, int node)¶
attempt to allocate physically contiguous memory, but upon failure, fall back to non-contiguous (vmalloc) allocation.
Parameters
size_t size
size of the request.
gfp_t flags
gfp mask for the allocation - must be compatible (superset) with GFP_KERNEL.
int node
numa node to allocate from
Description
Uses kmalloc to get the memory but if the allocation fails then falls back to the vmalloc allocator. Use kvfree for freeing the memory.
GFP_NOWAIT and GFP_ATOMIC are not supported, neither is the __GFP_NORETRY modifier. __GFP_RETRY_MAYFAIL is supported, and it should be used only if kmalloc is preferable to the vmalloc fallback, due to visible performance drawbacks.
Return
pointer to the allocated memory of NULL
in case of failure
-
void kvfree(const void *addr)¶
Free memory.
Parameters
const void *addr
Pointer to allocated memory.
Description
kvfree frees memory allocated by any of vmalloc()
, kmalloc()
or kvmalloc().
It is slightly more efficient to use kfree()
or vfree()
if you are certain
that you know which one to use.
Context
Either preemptible task context or not-NMI interrupt.
Virtually Contiguous Mappings¶
-
void vm_unmap_aliases(void)¶
unmap outstanding lazy aliases in the vmap layer
Parameters
void
no arguments
Description
The vmap/vmalloc layer lazily flushes kernel virtual mappings primarily to amortize TLB flushing overheads. What this means is that any page you have now, may, in a former life, have been mapped into kernel virtual address by the vmap layer and so there might be some CPUs with TLB entries still referencing that page (additional to the regular 1:1 kernel mapping).
vm_unmap_aliases flushes all such lazy mappings. After it returns, we can be sure that none of the pages we have control over will have any aliases from the vmap layer.
-
void vm_unmap_ram(const void *mem, unsigned int count)¶
unmap linear kernel address space set up by vm_map_ram
Parameters
const void *mem
the pointer returned by vm_map_ram
unsigned int count
the count passed to that vm_map_ram call (cannot unmap partial)
-
void *vm_map_ram(struct page **pages, unsigned int count, int node)¶
map pages linearly into kernel virtual address (vmalloc space)
Parameters
struct page **pages
an array of pointers to the pages to be mapped
unsigned int count
number of pages
int node
prefer to allocate data structures on this node
Description
If you use this function for less than VMAP_MAX_ALLOC pages, it could be
faster than vmap so it's good. But if you mix long-life and short-life
objects with vm_map_ram()
, it could consume lots of address space through
fragmentation (especially on a 32bit machine). You could see failures in
the end. Please use this function for short-lived objects.
Return
a pointer to the address that has been mapped, or NULL
on failure
Parameters
const void *addr
Memory base address
Description
Free the virtually continuous memory area starting at addr, as obtained
from one of the vmalloc()
family of APIs. This will usually also free the
physical memory underlying the virtual allocation, but that memory is
reference counted, so it will not be freed until the last user goes away.
If addr is NULL, no operation is performed.
Context
May sleep if called not from interrupt context.
Must not be called in NMI context (strictly speaking, it could be
if we have CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG, but making the calling
conventions for vfree()
arch-dependent would be a really bad idea).
Parameters
const void *addr
memory base address
Description
Free the virtually contiguous memory area starting at addr,
which was created from the page array passed to vmap()
.
Must not be called in interrupt context.
-
void *vmap(struct page **pages, unsigned int count, unsigned long flags, pgprot_t prot)¶
map an array of pages into virtually contiguous space
Parameters
struct page **pages
array of page pointers
unsigned int count
number of pages to map
unsigned long flags
vm_area->flags
pgprot_t prot
page protection for the mapping
Description
Maps count pages from pages into contiguous kernel virtual space.
If flags contains VM_MAP_PUT_PAGES
the ownership of the pages array itself
(which must be kmalloc or vmalloc memory) and one reference per pages in it
are transferred from the caller to vmap()
, and will be freed / dropped when
vfree()
is called on the return value.
Return
the address of the area or NULL
on failure
-
void *vmap_pfn(unsigned long *pfns, unsigned int count, pgprot_t prot)¶
map an array of PFNs into virtually contiguous space
Parameters
unsigned long *pfns
array of PFNs
unsigned int count
number of pages to map
pgprot_t prot
page protection for the mapping
Description
Maps count PFNs from pfns into contiguous kernel virtual space and returns the start address of the mapping.
-
void *__vmalloc_node(unsigned long size, unsigned long align, gfp_t gfp_mask, int node, const void *caller)¶
allocate virtually contiguous memory
Parameters
unsigned long size
allocation size
unsigned long align
desired alignment
gfp_t gfp_mask
flags for the page level allocator
int node
node to use for allocation or NUMA_NO_NODE
const void *caller
caller's return address
Description
Allocate enough pages to cover size from the page level allocator with gfp_mask flags. Map them into contiguous kernel virtual space.
Reclaim modifiers in gfp_mask - __GFP_NORETRY, __GFP_RETRY_MAYFAIL and __GFP_NOFAIL are not supported
Any use of gfp flags outside of GFP_KERNEL should be consulted with mm people.
Return
pointer to the allocated memory or NULL
on error
-
void *vmalloc(unsigned long size)¶
allocate virtually contiguous memory
Parameters
unsigned long size
allocation size
Description
Allocate enough pages to cover size from the page level allocator and map them into contiguous kernel virtual space.
For tight control over page level allocator and protection flags use __vmalloc() instead.
Return
pointer to the allocated memory or NULL
on error
-
void *vmalloc_huge(unsigned long size, gfp_t gfp_mask)¶
allocate virtually contiguous memory, allow huge pages
Parameters
unsigned long size
allocation size
gfp_t gfp_mask
flags for the page level allocator
Description
Allocate enough pages to cover size from the page level allocator and map them into contiguous kernel virtual space. If size is greater than or equal to PMD_SIZE, allow using huge pages for the memory
Return
pointer to the allocated memory or NULL
on error
-
void *vzalloc(unsigned long size)¶
allocate virtually contiguous memory with zero fill
Parameters
unsigned long size
allocation size
Description
Allocate enough pages to cover size from the page level allocator and map them into contiguous kernel virtual space. The memory allocated is set to zero.
For tight control over page level allocator and protection flags use __vmalloc() instead.
Return
pointer to the allocated memory or NULL
on error
-
void *vmalloc_user(unsigned long size)¶
allocate zeroed virtually contiguous memory for userspace
Parameters
unsigned long size
allocation size
Description
The resulting memory area is zeroed so it can be mapped to userspace without leaking data.
Return
pointer to the allocated memory or NULL
on error
-
void *vmalloc_node(unsigned long size, int node)¶
allocate memory on a specific node
Parameters
unsigned long size
allocation size
int node
numa node
Description
Allocate enough pages to cover size from the page level allocator and map them into contiguous kernel virtual space.
For tight control over page level allocator and protection flags use __vmalloc() instead.
Return
pointer to the allocated memory or NULL
on error
-
void *vzalloc_node(unsigned long size, int node)¶
allocate memory on a specific node with zero fill
Parameters
unsigned long size
allocation size
int node
numa node
Description
Allocate enough pages to cover size from the page level allocator and map them into contiguous kernel virtual space. The memory allocated is set to zero.
Return
pointer to the allocated memory or NULL
on error
-
void *vmalloc_32(unsigned long size)¶
allocate virtually contiguous memory (32bit addressable)
Parameters
unsigned long size
allocation size
Description
Allocate enough 32bit PA addressable pages to cover size from the page level allocator and map them into contiguous kernel virtual space.
Return
pointer to the allocated memory or NULL
on error
-
void *vmalloc_32_user(unsigned long size)¶
allocate zeroed virtually contiguous 32bit memory
Parameters
unsigned long size
allocation size
Description
The resulting memory area is 32bit addressable and zeroed so it can be mapped to userspace without leaking data.
Return
pointer to the allocated memory or NULL
on error
-
int remap_vmalloc_range(struct vm_area_struct *vma, void *addr, unsigned long pgoff)¶
map vmalloc pages to userspace
Parameters
struct vm_area_struct *vma
vma to cover (map full range of vma)
void *addr
vmalloc memory
unsigned long pgoff
number of pages into addr before first page to map
Return
0 for success, -Exxx on failure
Description
This function checks that addr is a valid vmalloc'ed area, and that it is big enough to cover the vma. Will return failure if that criteria isn't met.
Similar to remap_pfn_range()
(see mm/memory.c)
File Mapping and Page Cache¶
Filemap¶
-
int filemap_fdatawrite_wbc(struct address_space *mapping, struct writeback_control *wbc)¶
start writeback on mapping dirty pages in range
Parameters
struct address_space *mapping
address space structure to write
struct writeback_control *wbc
the writeback_control controlling the writeout
Description
Call writepages on the mapping using the provided wbc to control the writeout.
Return
0
on success, negative error code otherwise.
-
int filemap_flush(struct address_space *mapping)¶
mostly a non-blocking flush
Parameters
struct address_space *mapping
target address_space
Description
This is a mostly non-blocking flush. Not suitable for data-integrity purposes - I/O may not be started against all dirty pages.
Return
0
on success, negative error code otherwise.
-
bool filemap_range_has_page(struct address_space *mapping, loff_t start_byte, loff_t end_byte)¶
check if a page exists in range.
Parameters
struct address_space *mapping
address space within which to check
loff_t start_byte
offset in bytes where the range starts
loff_t end_byte
offset in bytes where the range ends (inclusive)
Description
Find at least one page in the range supplied, usually used to check if direct writing in this range will trigger a writeback.
Return
true
if at least one page exists in the specified range,
false
otherwise.
-
int filemap_fdatawait_range(struct address_space *mapping, loff_t start_byte, loff_t end_byte)¶
wait for writeback to complete
Parameters
struct address_space *mapping
address space structure to wait for
loff_t start_byte
offset in bytes where the range starts
loff_t end_byte
offset in bytes where the range ends (inclusive)
Description
Walk the list of under-writeback pages of the given address space in the given range and wait for all of them. Check error status of the address space and return it.
Since the error status of the address space is cleared by this function, callers are responsible for checking the return value and handling and/or reporting the error.
Return
error status of the address space.
-
int filemap_fdatawait_range_keep_errors(struct address_space *mapping, loff_t start_byte, loff_t end_byte)¶
wait for writeback to complete
Parameters
struct address_space *mapping
address space structure to wait for
loff_t start_byte
offset in bytes where the range starts
loff_t end_byte
offset in bytes where the range ends (inclusive)
Description
Walk the list of under-writeback pages of the given address space in the
given range and wait for all of them. Unlike filemap_fdatawait_range()
,
this function does not clear error status of the address space.
Use this function if callers don't handle errors themselves. Expected call sites are system-wide / filesystem-wide data flushers: e.g. sync(2), fsfreeze(8)
-
int file_fdatawait_range(struct file *file, loff_t start_byte, loff_t end_byte)¶
wait for writeback to complete
Parameters
struct file *file
file pointing to address space structure to wait for
loff_t start_byte
offset in bytes where the range starts
loff_t end_byte
offset in bytes where the range ends (inclusive)
Description
Walk the list of under-writeback pages of the address space that file refers to, in the given range and wait for all of them. Check error status of the address space vs. the file->f_wb_err cursor and return it.
Since the error status of the file is advanced by this function, callers are responsible for checking the return value and handling and/or reporting the error.
Return
error status of the address space vs. the file->f_wb_err cursor.
-
int filemap_fdatawait_keep_errors(struct address_space *mapping)¶
wait for writeback without clearing errors
Parameters
struct address_space *mapping
address space structure to wait for
Description
Walk the list of under-writeback pages of the given address space and wait for all of them. Unlike filemap_fdatawait(), this function does not clear error status of the address space.
Use this function if callers don't handle errors themselves. Expected call sites are system-wide / filesystem-wide data flushers: e.g. sync(2), fsfreeze(8)
Return
error status of the address space.
-
int filemap_write_and_wait_range(struct address_space *mapping, loff_t lstart, loff_t lend)¶
write out & wait on a file range
Parameters
struct address_space *mapping
the address_space for the pages
loff_t lstart
offset in bytes where the range starts
loff_t lend
offset in bytes where the range ends (inclusive)
Description
Write out and wait upon file offsets lstart->lend, inclusive.
Note that lend is inclusive (describes the last byte to be written) so that this function can be used to write to the very end-of-file (end = -1).
Return
error status of the address space.
-
int file_check_and_advance_wb_err(struct file *file)¶
report wb error (if any) that was previously and advance wb_err to current one
Parameters
struct file *file
struct file on which the error is being reported
Description
When userland calls fsync (or something like nfsd does the equivalent), we want to report any writeback errors that occurred since the last fsync (or since the file was opened if there haven't been any).
Grab the wb_err from the mapping. If it matches what we have in the file, then just quickly return 0. The file is all caught up.
If it doesn't match, then take the mapping value, set the "seen" flag in it and try to swap it into place. If it works, or another task beat us to it with the new value, then update the f_wb_err and return the error portion. The error at this point must be reported via proper channels (a'la fsync, or NFS COMMIT operation, etc.).
While we handle mapping->wb_err with atomic operations, the f_wb_err value is protected by the f_lock since we must ensure that it reflects the latest value swapped in for this file descriptor.
Return
0
on success, negative error code otherwise.
-
int file_write_and_wait_range(struct file *file, loff_t lstart, loff_t lend)¶
write out & wait on a file range
Parameters
struct file *file
file pointing to address_space with pages
loff_t lstart
offset in bytes where the range starts
loff_t lend
offset in bytes where the range ends (inclusive)
Description
Write out and wait upon file offsets lstart->lend, inclusive.
Note that lend is inclusive (describes the last byte to be written) so that this function can be used to write to the very end-of-file (end = -1).
After writing out and waiting on the data, we check and advance the f_wb_err cursor to the latest value, and return any errors detected there.
Return
0
on success, negative error code otherwise.
-
void replace_page_cache_folio(struct folio *old, struct folio *new)¶
replace a pagecache folio with a new one
Parameters
struct folio *old
folio to be replaced
struct folio *new
folio to replace with
Description
This function replaces a folio in the pagecache with a new one. On success it acquires the pagecache reference for the new folio and drops it for the old folio. Both the old and new folios must be locked. This function does not add the new folio to the LRU, the caller must do that.
The remove + add is atomic. This function cannot fail.
-
void folio_add_wait_queue(struct folio *folio, wait_queue_entry_t *waiter)¶
Add an arbitrary waiter to a folio's wait queue
Parameters
struct folio *folio
Folio defining the wait queue of interest
wait_queue_entry_t *waiter
Waiter to add to the queue
Description
Add an arbitrary waiter to the wait queue for the nominated folio.
Parameters
struct folio *folio
The folio.
Description
Unlocks the folio and wakes up any thread sleeping on the page lock.
Context
May be called from interrupt or process context. May not be called from NMI context.
Parameters
struct folio *folio
The folio.
bool success
True if all reads completed successfully.
Description
When all reads against a folio have completed, filesystems should call this function to let the pagecache know that no more reads are outstanding. This will unlock the folio and wake up any thread sleeping on the lock. The folio will also be marked uptodate if all reads succeeded.
Context
May be called from interrupt or process context. May not be called from NMI context.
Parameters
struct folio *folio
The folio.
Description
Clear the PG_private_2 bit on a folio and wake up any sleepers waiting for it. The folio reference held for PG_private_2 being set is released.
This is, for example, used when a netfs folio is being written to a local disk cache, thereby allowing writes to the cache for the same folio to be serialised.
Parameters
struct folio *folio
The folio to wait on.
Description
Wait for PG_private_2 (aka PG_fscache) to be cleared on a folio.
-
int folio_wait_private_2_killable(struct folio *folio)¶
Wait for PG_private_2 to be cleared on a folio.
Parameters
struct folio *folio
The folio to wait on.
Description
Wait for PG_private_2 (aka PG_fscache) to be cleared on a folio or until a fatal signal is received by the calling task.
Return
0 if successful.
-EINTR if a fatal signal was encountered.
Parameters
struct folio *folio
The folio.
Description
The folio must actually be under writeback.
Context
May be called from process or interrupt context.
-
void __folio_lock(struct folio *folio)¶
Get a lock on the folio, assuming we need to sleep to get it.
Parameters
struct folio *folio
The folio to lock
-
pgoff_t page_cache_next_miss(struct address_space *mapping, pgoff_t index, unsigned long max_scan)¶
Find the next gap in the page cache.
Parameters
struct address_space *mapping
Mapping.
pgoff_t index
Index.
unsigned long max_scan
Maximum range to search.
Description
Search the range [index, min(index + max_scan - 1, ULONG_MAX)] for the gap with the lowest index.
This function may be called under the rcu_read_lock. However, this will not atomically search a snapshot of the cache at a single point in time. For example, if a gap is created at index 5, then subsequently a gap is created at index 10, page_cache_next_miss covering both indices may return 10 if called under the rcu_read_lock.
Return
The index of the gap if found, otherwise an index outside the range specified (in which case 'return - index >= max_scan' will be true). In the rare case of index wrap-around, 0 will be returned.
-
pgoff_t page_cache_prev_miss(struct address_space *mapping, pgoff_t index, unsigned long max_scan)¶
Find the previous gap in the page cache.
Parameters
struct address_space *mapping
Mapping.
pgoff_t index
Index.
unsigned long max_scan
Maximum range to search.
Description
Search the range [max(index - max_scan + 1, 0), index] for the gap with the highest index.
This function may be called under the rcu_read_lock. However, this will
not atomically search a snapshot of the cache at a single point in time.
For example, if a gap is created at index 10, then subsequently a gap is
created at index 5, page_cache_prev_miss()
covering both indices may
return 5 if called under the rcu_read_lock.
Return
The index of the gap if found, otherwise an index outside the range specified (in which case 'index - return >= max_scan' will be true). In the rare case of wrap-around, ULONG_MAX will be returned.
-
struct folio *__filemap_get_folio(struct address_space *mapping, pgoff_t index, fgf_t fgp_flags, gfp_t gfp)¶
Find and get a reference to a folio.
Parameters
struct address_space *mapping
The address_space to search.
pgoff_t index
The page index.
fgf_t fgp_flags
FGP
flags modify how the folio is returned.gfp_t gfp
Memory allocation flags to use if
FGP_CREAT
is specified.
Description
Looks up the page cache entry at mapping & index.
If FGP_LOCK
or FGP_CREAT
are specified then the function may sleep even
if the GFP
flags specified for FGP_CREAT
are atomic.
If this function returns a folio, it is returned with an increased refcount.
Return
The found folio or an ERR_PTR()
otherwise.
-
unsigned filemap_get_folios(struct address_space *mapping, pgoff_t *start, pgoff_t end, struct folio_batch *fbatch)¶
Get a batch of folios
Parameters
struct address_space *mapping
The address_space to search
pgoff_t *start
The starting page index
pgoff_t end
The final page index (inclusive)
struct folio_batch *fbatch
The batch to fill.
Description
Search for and return a batch of folios in the mapping starting at index start and up to index end (inclusive). The folios are returned in fbatch with an elevated reference count.
Return
The number of folios which were found. We also update start to index the next folio for the traversal.
-
unsigned filemap_get_folios_contig(struct address_space *mapping, pgoff_t *start, pgoff_t end, struct folio_batch *fbatch)¶
Get a batch of contiguous folios
Parameters
struct address_space *mapping
The address_space to search
pgoff_t *start
The starting page index
pgoff_t end
The final page index (inclusive)
struct folio_batch *fbatch
The batch to fill
Description
filemap_get_folios_contig()
works exactly like filemap_get_folios()
,
except the returned folios are guaranteed to be contiguous. This may
not return all contiguous folios if the batch gets filled up.
Return
The number of folios found. Also update start to be positioned for traversal of the next folio.
-
unsigned filemap_get_folios_tag(struct address_space *mapping, pgoff_t *start, pgoff_t end, xa_mark_t tag, struct folio_batch *fbatch)¶
Get a batch of folios matching tag
Parameters
struct address_space *mapping
The address_space to search
pgoff_t *start
The starting page index
pgoff_t end
The final page index (inclusive)
xa_mark_t tag
The tag index
struct folio_batch *fbatch
The batch to fill
Description
The first folio may start before start; if it does, it will contain start. The final folio may extend beyond end; if it does, it will contain end. The folios have ascending indices. There may be gaps between the folios if there are indices which have no folio in the page cache. If folios are added to or removed from the page cache while this is running, they may or may not be found by this call. Only returns folios that are tagged with tag.
Return
The number of folios found. Also update start to index the next folio for traversal.
-
ssize_t filemap_read(struct kiocb *iocb, struct iov_iter *iter, ssize_t already_read)¶
Read data from the page cache.
Parameters
struct kiocb *iocb
The iocb to read.
struct iov_iter *iter
Destination for the data.
ssize_t already_read
Number of bytes already read by the caller.
Description
Copies data from the page cache. If the data is not currently present, uses the readahead and read_folio address_space operations to fetch it.
Return
Total number of bytes copied, including those already read by the caller. If an error happens before any bytes are copied, returns a negative error number.
-
ssize_t generic_file_read_iter(struct kiocb *iocb, struct iov_iter *iter)¶
generic filesystem read routine
Parameters
struct kiocb *iocb
kernel I/O control block
struct iov_iter *iter
destination for the data read
Description
This is the "read_iter()" routine for all filesystems that can use the page cache directly.
The IOCB_NOWAIT flag in iocb->ki_flags indicates that -EAGAIN shall be returned when no data can be read without waiting for I/O requests to complete; it doesn't prevent readahead.
The IOCB_NOIO flag in iocb->ki_flags indicates that no new I/O requests shall be made for the read or for readahead. When no data can be read, -EAGAIN shall be returned. When readahead would be triggered, a partial, possibly empty read shall be returned.
Return
number of bytes copied, even for partial reads
negative error code (or 0 if IOCB_NOIO) if nothing was read
-
ssize_t filemap_splice_read(struct file *in, loff_t *ppos, struct pipe_inode_info *pipe, size_t len, unsigned int flags)¶
Splice data from a file's pagecache into a pipe
Parameters
struct file *in
The file to read from
loff_t *ppos
Pointer to the file position to read from
struct pipe_inode_info *pipe
The pipe to splice into
size_t len
The amount to splice
unsigned int flags
The SPLICE_F_* flags
Description
This function gets folios from a file's pagecache and splices them into the pipe. Readahead will be called as necessary to fill more folios. This may be used for blockdevs also.
Return
On success, the number of bytes read will be returned and *ppos will be updated if appropriate; 0 will be returned if there is no more data to be read; -EAGAIN will be returned if the pipe had no space, and some other negative error code will be returned on error. A short read may occur if the pipe has insufficient space, we reach the end of the data or we hit a hole.
-
vm_fault_t filemap_fault(struct vm_fault *vmf)¶
read in file data for page fault handling
Parameters
struct vm_fault *vmf
struct vm_fault containing details of the fault
Description
filemap_fault()
is invoked via the vma operations vector for a
mapped memory region to read in file data during a page fault.
The goto's are kind of ugly, but this streamlines the normal case of having it in the page cache, and handles the special cases reasonably without having a lot of duplicated code.
vma->vm_mm->mmap_lock must be held on entry.
If our return value has VM_FAULT_RETRY set, it's because the mmap_lock may be dropped before doing I/O or by lock_folio_maybe_drop_mmap().
If our return value does not have VM_FAULT_RETRY set, the mmap_lock has not been released.
We never return with VM_FAULT_RETRY and a bit from VM_FAULT_ERROR set.
Return
bitwise-OR of VM_FAULT_
codes.
-
struct folio *read_cache_folio(struct address_space *mapping, pgoff_t index, filler_t filler, struct file *file)¶
Read into page cache, fill it if needed.
Parameters
struct address_space *mapping
The address_space to read from.
pgoff_t index
The index to read.
filler_t filler
Function to perform the read, or NULL to use aops->read_folio().
struct file *file
Passed to filler function, may be NULL if not required.
Description
Read one page into the page cache. If it succeeds, the folio returned will contain index, but it may not be the first page of the folio.
If the filler function returns an error, it will be returned to the caller.
Context
May sleep. Expects mapping->invalidate_lock to be held.
Return
An uptodate folio on success, ERR_PTR()
on failure.
-
struct folio *mapping_read_folio_gfp(struct address_space *mapping, pgoff_t index, gfp_t gfp)¶
Read into page cache, using specified allocation flags.
Parameters
struct address_space *mapping
The address_space for the folio.
pgoff_t index
The index that the allocated folio will contain.
gfp_t gfp
The page allocator flags to use if allocating.
Description
This is the same as "read_cache_folio(mapping, index, NULL, NULL)", but with any new memory allocations done using the specified allocation flags.
The most likely error from this function is EIO, but ENOMEM is possible and so is EINTR. If ->read_folio returns another error, that will be returned to the caller.
The function expects mapping->invalidate_lock to be already held.
Return
Uptodate folio on success, ERR_PTR()
on failure.
-
struct page *read_cache_page_gfp(struct address_space *mapping, pgoff_t index, gfp_t gfp)¶
read into page cache, using specified page allocation flags.
Parameters
struct address_space *mapping
the page's address_space
pgoff_t index
the page index
gfp_t gfp
the page allocator flags to use if allocating
Description
This is the same as "read_mapping_page(mapping, index, NULL)", but with any new page allocations done using the specified allocation flags.
If the page does not get brought uptodate, return -EIO.
The function expects mapping->invalidate_lock to be already held.
Return
up to date page on success, ERR_PTR()
on failure.
-
ssize_t __generic_file_write_iter(struct kiocb *iocb, struct iov_iter *from)¶
write data to a file
Parameters
struct kiocb *iocb
IO state structure (file, offset, etc.)
struct iov_iter *from
iov_iter with data to write
Description
This function does all the work needed for actually writing data to a file. It does all basic checks, removes SUID from the file, updates modification times and calls proper subroutines depending on whether we do direct IO or a standard buffered write.
It expects i_rwsem to be grabbed unless we work on a block device or similar object which does not need locking at all.
This function does not take care of syncing data in case of O_SYNC write. A caller has to handle it. This is mainly due to the fact that we want to avoid syncing under i_rwsem.
Return
number of bytes written, even for truncated writes
negative error code if no data has been written at all
-
ssize_t generic_file_write_iter(struct kiocb *iocb, struct iov_iter *from)¶
write data to a file
Parameters
struct kiocb *iocb
IO state structure
struct iov_iter *from
iov_iter with data to write
Description
This is a wrapper around __generic_file_write_iter()
to be used by most
filesystems. It takes care of syncing the file in case of O_SYNC file
and acquires i_rwsem as needed.
Return
negative error code if no data has been written at all of
vfs_fsync_range()
failed for a synchronous writenumber of bytes written, even for truncated writes
-
bool filemap_release_folio(struct folio *folio, gfp_t gfp)¶
Release fs-specific metadata on a folio.
Parameters
struct folio *folio
The folio which the kernel is trying to free.
gfp_t gfp
Memory allocation flags (and I/O mode).
Description
The address_space is trying to release any data attached to a folio (presumably at folio->private).
This will also be called if the private_2 flag is set on a page, indicating that the folio has other metadata associated with it.
The gfp argument specifies whether I/O may be performed to release this page (__GFP_IO), and whether the call may block (__GFP_RECLAIM & __GFP_FS).
Return
true
if the release was successful, otherwise false
.
Readahead¶
Readahead is used to read content into the page cache before it is explicitly requested by the application. Readahead only ever attempts to read folios that are not yet in the page cache. If a folio is present but not up-to-date, readahead will not try to read it. In that case a simple ->read_folio() will be requested.
Readahead is triggered when an application read request (whether a system call or a page fault) finds that the requested folio is not in the page cache, or that it is in the page cache and has the readahead flag set. This flag indicates that the folio was read as part of a previous readahead request and now that it has been accessed, it is time for the next readahead.
Each readahead request is partly synchronous read, and partly async
readahead. This is reflected in the struct file_ra_state
which
contains ->size being the total number of pages, and ->async_size
which is the number of pages in the async section. The readahead
flag will be set on the first folio in this async section to trigger
a subsequent readahead. Once a series of sequential reads has been
established, there should be no need for a synchronous component and
all readahead request will be fully asynchronous.
When either of the triggers causes a readahead, three numbers need to be determined: the start of the region to read, the size of the region, and the size of the async tail.
The start of the region is simply the first page address at or after the accessed address, which is not currently populated in the page cache. This is found with a simple search in the page cache.
The size of the async tail is determined by subtracting the size that was explicitly requested from the determined request size, unless this would be less than zero - then zero is used. NOTE THIS CALCULATION IS WRONG WHEN THE START OF THE REGION IS NOT THE ACCESSED PAGE. ALSO THIS CALCULATION IS NOT USED CONSISTENTLY.
The size of the region is normally determined from the size of the
previous readahead which loaded the preceding pages. This may be
discovered from the struct file_ra_state
for simple sequential reads,
or from examining the state of the page cache when multiple
sequential reads are interleaved. Specifically: where the readahead
was triggered by the readahead flag, the size of the previous
readahead is assumed to be the number of pages from the triggering
page to the start of the new readahead. In these cases, the size of
the previous readahead is scaled, often doubled, for the new
readahead, though see get_next_ra_size() for details.
If the size of the previous read cannot be determined, the number of preceding pages in the page cache is used to estimate the size of a previous read. This estimate could easily be misled by random reads being coincidentally adjacent, so it is ignored unless it is larger than the current request, and it is not scaled up, unless it is at the start of file.
In general readahead is accelerated at the start of the file, as reads from there are often sequential. There are other minor adjustments to the readahead size in various special cases and these are best discovered by reading the code.
The above calculation, based on the previous readahead size, determines the size of the readahead, to which any requested read size may be added.
Readahead requests are sent to the filesystem using the ->readahead()
address space operation, for which mpage_readahead()
is a canonical
implementation. ->readahead() should normally initiate reads on all
folios, but may fail to read any or all folios without causing an I/O
error. The page cache reading code will issue a ->read_folio() request
for any folio which ->readahead() did not read, and only an error
from this will be final.
->readahead() will generally call readahead_folio()
repeatedly to get
each folio from those prepared for readahead. It may fail to read a
folio by:
not calling
readahead_folio()
sufficiently many times, effectively ignoring some folios, as might be appropriate if the path to storage is congested.failing to actually submit a read request for a given folio, possibly due to insufficient resources, or
getting an error during subsequent processing of a request.
In the last two cases, the folio should be unlocked by the filesystem to indicate that the read attempt has failed. In the first case the folio will be unlocked by the VFS.
Those folios not in the final async_size
of the request should be
considered to be important and ->readahead() should not fail them due
to congestion or temporary resource unavailability, but should wait
for necessary resources (e.g. memory or indexing information) to
become available. Folios in the final async_size
may be
considered less urgent and failure to read them is more acceptable.
In this case it is best to use filemap_remove_folio() to remove the
folios from the page cache as is automatically done for folios that
were not fetched with readahead_folio()
. This will allow a
subsequent synchronous readahead request to try them again. If they
are left in the page cache, then they will be read individually using
->read_folio() which may be less efficient.
-
void page_cache_ra_unbounded(struct readahead_control *ractl, unsigned long nr_to_read, unsigned long lookahead_size)¶
Start unchecked readahead.
Parameters
struct readahead_control *ractl
Readahead control.
unsigned long nr_to_read
The number of pages to read.
unsigned long lookahead_size
Where to start the next readahead.
Description
This function is for filesystems to call when they want to start
readahead beyond a file's stated i_size. This is almost certainly
not the function you want to call. Use page_cache_async_readahead()
or page_cache_sync_readahead()
instead.
Context
File is referenced by caller. Mutexes may be held by caller. May sleep, but will not reenter filesystem to reclaim memory.
-
void readahead_expand(struct readahead_control *ractl, loff_t new_start, size_t new_len)¶
Expand a readahead request
Parameters
struct readahead_control *ractl
The request to be expanded
loff_t new_start
The revised start
size_t new_len
The revised size of the request
Description
Attempt to expand a readahead request outwards from the current size to the specified size by inserting locked pages before and after the current window to increase the size to the new window. This may involve the insertion of THPs, in which case the window may get expanded even beyond what was requested.
The algorithm will stop if it encounters a conflicting page already in the pagecache and leave a smaller expansion than requested.
The caller must check for this by examining the revised ractl object for a different expansion than was requested.
Writeback¶
-
int balance_dirty_pages_ratelimited_flags(struct address_space *mapping, unsigned int flags)¶
Balance dirty memory state.
Parameters
struct address_space *mapping
address_space which was dirtied.
unsigned int flags
BDP flags.
Description
Processes which are dirtying memory should call in here once for each page which was newly dirtied. The function will periodically check the system's dirty state and will initiate writeback if needed.
See balance_dirty_pages_ratelimited()
for details.
Return
If flags contains BDP_ASYNC, it may return -EAGAIN to indicate that memory is out of balance and the caller must wait for I/O to complete. Otherwise, it will return 0 to indicate that either memory was already in balance, or it was able to sleep until the amount of dirty memory returned to balance.
-
void balance_dirty_pages_ratelimited(struct address_space *mapping)¶
balance dirty memory state.
Parameters
struct address_space *mapping
address_space which was dirtied.
Description
Processes which are dirtying memory should call in here once for each page which was newly dirtied. The function will periodically check the system's dirty state and will initiate writeback if needed.
Once we're over the dirty memory limit we decrease the ratelimiting by a lot, to prevent individual processes from overshooting the limit by (ratelimit_pages) each.
-
void tag_pages_for_writeback(struct address_space *mapping, pgoff_t start, pgoff_t end)¶
tag pages to be written by write_cache_pages
Parameters
struct address_space *mapping
address space structure to write
pgoff_t start
starting page index
pgoff_t end
ending page index (inclusive)
Description
This function scans the page range from start to end (inclusive) and tags all pages that have DIRTY tag set with a special TOWRITE tag. The idea is that write_cache_pages (or whoever calls this function) will then use TOWRITE tag to identify pages eligible for writeback. This mechanism is used to avoid livelocking of writeback by a process steadily creating new dirty pages in the file (thus it is important for this function to be quick so that it can tag pages faster than a dirtying process can create them).
-
int write_cache_pages(struct address_space *mapping, struct writeback_control *wbc, writepage_t writepage, void *data)¶
walk the list of dirty pages of the given address space and write all of them.
Parameters
struct address_space *mapping
address space structure to write
struct writeback_control *wbc
subtract the number of written pages from *wbc->nr_to_write
writepage_t writepage
function called for each page
void *data
data passed to writepage function
Description
If a page is already under I/O, write_cache_pages()
skips it, even
if it's dirty. This is desirable behaviour for memory-cleaning writeback,
but it is INCORRECT for data-integrity system calls such as fsync(). fsync()
and msync() need to guarantee that all the data which was dirty at the time
the call was made get new I/O started against them. If wbc->sync_mode is
WB_SYNC_ALL then we were called for data integrity and we must wait for
existing IO to complete.
To avoid livelocks (when other process dirties new pages), we first tag pages which should be written back with TOWRITE tag and only then start writing them. For data-integrity sync we have to be careful so that we do not miss some pages (e.g., because some other process has cleared TOWRITE tag we set). The rule we follow is that TOWRITE tag can be cleared only by the process clearing the DIRTY tag (and submitting the page for IO).
To avoid deadlocks between range_cyclic writeback and callers that hold
pages in PageWriteback to aggregate IO until write_cache_pages()
returns,
we do not loop back to the start of the file. Doing so causes a page
lock/page writeback access order inversion - we should only ever lock
multiple pages in ascending page->index order, and looping back to the start
of the file violates that rule and causes deadlocks.
Return
0
on success, negative error code otherwise
-
bool filemap_dirty_folio(struct address_space *mapping, struct folio *folio)¶
Mark a folio dirty for filesystems which do not use buffer_heads.
Parameters
struct address_space *mapping
Address space this folio belongs to.
struct folio *folio
Folio to be marked as dirty.
Description
Filesystems which do not use buffer heads should call this function from their dirty_folio address space operation. It ignores the contents of folio_get_private(), so if the filesystem marks individual blocks as dirty, the filesystem should handle that itself.
This is also sometimes used by filesystems which use buffer_heads when a single buffer is being dirtied: we want to set the folio dirty in that case, but not all the buffers. This is a "bottom-up" dirtying, whereas block_dirty_folio() is a "top-down" dirtying.
The caller must ensure this doesn't race with truncation. Most will simply hold the folio lock, but e.g. zap_pte_range() calls with the folio mapped and the pte lock held, which also locks out truncation.
-
bool folio_redirty_for_writepage(struct writeback_control *wbc, struct folio *folio)¶
Decline to write a dirty folio.
Parameters
struct writeback_control *wbc
The writeback control.
struct folio *folio
The folio.
Description
When a writepage implementation decides that it doesn't want to write folio for some reason, it should call this function, unlock folio and return 0.
Return
True if we redirtied the folio. False if someone else dirtied it first.
Parameters
struct folio *folio
The folio.
Description
The folio may not be truncated while this function is running. Holding the folio lock is sufficient to prevent truncation, but some callers cannot acquire a sleeping lock. These callers instead hold the page table lock for a page table which contains at least one page in this folio. Truncation will block on the page table lock as it unmaps pages before removing the folio from its mapping.
Return
True if the folio was newly dirtied, false if it was already dirty.
Parameters
struct folio *folio
The folio to wait for.
Description
If the folio is currently being written back to storage, wait for the I/O to complete.
Context
Sleeps. Must be called in process context and with no spinlocks held. Caller should hold a reference on the folio. If the folio is not locked, writeback may start again after writeback has finished.
Parameters
struct folio *folio
The folio to wait for.
Description
If the folio is currently being written back to storage, wait for the I/O to complete or a fatal signal to arrive.
Context
Sleeps. Must be called in process context and with no spinlocks held. Caller should hold a reference on the folio. If the folio is not locked, writeback may start again after writeback has finished.
Return
0 on success, -EINTR if we get a fatal signal while waiting.
Parameters
struct folio *folio
The folio to wait on.
Description
This function determines if the given folio is related to a backing device that requires folio contents to be held stable during writeback. If so, then it will wait for any pending writeback to complete.
Context
Sleeps. Must be called in process context and with no spinlocks held. Caller should hold a reference on the folio. If the folio is not locked, writeback may start again after writeback has finished.
Truncate¶
-
void folio_invalidate(struct folio *folio, size_t offset, size_t length)¶
Invalidate part or all of a folio.
Parameters
struct folio *folio
The folio which is affected.
size_t offset
start of the range to invalidate
size_t length
length of the range to invalidate
Description
folio_invalidate()
is called when all or part of the folio has become
invalidated by a truncate operation.
folio_invalidate()
does not have to release all buffers, but it must
ensure that no dirty buffer is left outside offset and that no I/O
is underway against any of the blocks which are outside the truncation
point. Because the caller is about to free (and possibly reuse) those
blocks on-disk.
-
void truncate_inode_pages_range(struct address_space *mapping, loff_t lstart, loff_t lend)¶
truncate range of pages specified by start & end byte offsets
Parameters
struct address_space *mapping
mapping to truncate
loff_t lstart
offset from which to truncate
loff_t lend
offset to which to truncate (inclusive)
Description
Truncate the page cache, removing the pages that are between specified offsets (and zeroing out partial pages if lstart or lend + 1 is not page aligned).
Truncate takes two passes - the first pass is nonblocking. It will not block on page locks and it will not block on writeback. The second pass will wait. This is to prevent as much IO as possible in the affected region. The first pass will remove most pages, so the search cost of the second pass is low.
We pass down the cache-hot hint to the page freeing code. Even if the mapping is large, it is probably the case that the final pages are the most recently touched, and freeing happens in ascending file offset order.
Note that since ->invalidate_folio() accepts range to invalidate truncate_inode_pages_range is able to handle cases where lend + 1 is not page aligned properly.
-
void truncate_inode_pages(struct address_space *mapping, loff_t lstart)¶
truncate all the pages from an offset
Parameters
struct address_space *mapping
mapping to truncate
loff_t lstart
offset from which to truncate
Description
Called under (and serialised by) inode->i_rwsem and mapping->invalidate_lock.
Note
When this function returns, there can be a page in the process of deletion (inside __filemap_remove_folio()) in the specified range. Thus mapping->nrpages can be non-zero when this function returns even after truncation of the whole mapping.
-
void truncate_inode_pages_final(struct address_space *mapping)¶
truncate all pages before inode dies
Parameters
struct address_space *mapping
mapping to truncate
Description
Called under (and serialized by) inode->i_rwsem.
Filesystems have to use this in the .evict_inode path to inform the VM that this is the final truncate and the inode is going away.
-
unsigned long invalidate_mapping_pages(struct address_space *mapping, pgoff_t start, pgoff_t end)¶
Invalidate all clean, unlocked cache of one inode
Parameters
struct address_space *mapping
the address_space which holds the cache to invalidate
pgoff_t start
the offset 'from' which to invalidate
pgoff_t end
the offset 'to' which to invalidate (inclusive)
Description
This function removes pages that are clean, unmapped and unlocked, as well as shadow entries. It will not block on IO activity.
If you want to remove all the pages of one inode, regardless of
their use and writeback state, use truncate_inode_pages()
.
Return
The number of indices that had their contents invalidated
-
int invalidate_inode_pages2_range(struct address_space *mapping, pgoff_t start, pgoff_t end)¶
remove range of pages from an address_space
Parameters
struct address_space *mapping
the address_space
pgoff_t start
the page offset 'from' which to invalidate
pgoff_t end
the page offset 'to' which to invalidate (inclusive)
Description
Any pages which are found to be mapped into pagetables are unmapped prior to invalidation.
Return
-EBUSY if any pages could not be invalidated.
-
int invalidate_inode_pages2(struct address_space *mapping)¶
remove all pages from an address_space
Parameters
struct address_space *mapping
the address_space
Description
Any pages which are found to be mapped into pagetables are unmapped prior to invalidation.
Return
-EBUSY if any pages could not be invalidated.
-
void truncate_pagecache(struct inode *inode, loff_t newsize)¶
unmap and remove pagecache that has been truncated
Parameters
struct inode *inode
inode
loff_t newsize
new file size
Description
inode's new i_size must already be written before truncate_pagecache is called.
This function should typically be called before the filesystem releases resources associated with the freed range (eg. deallocates blocks). This way, pagecache will always stay logically coherent with on-disk format, and the filesystem would not have to deal with situations such as writepage being called for a page that has already had its underlying blocks deallocated.
-
void truncate_setsize(struct inode *inode, loff_t newsize)¶
update inode and pagecache for a new file size
Parameters
struct inode *inode
inode
loff_t newsize
new file size
Description
truncate_setsize updates i_size and performs pagecache truncation (if necessary) to newsize. It will be typically be called from the filesystem's setattr function when ATTR_SIZE is passed in.
Must be called with a lock serializing truncates and writes (generally i_rwsem but e.g. xfs uses a different lock) and before all filesystem specific block truncation has been performed.
-
void pagecache_isize_extended(struct inode *inode, loff_t from, loff_t to)¶
update pagecache after extension of i_size
Parameters
struct inode *inode
inode for which i_size was extended
loff_t from
original inode size
loff_t to
new inode size
Description
Handle extension of inode size either caused by extending truncate or by write starting after current i_size. We mark the page straddling current i_size RO so that page_mkwrite() is called on the nearest write access to the page. This way filesystem can be sure that page_mkwrite() is called on the page before user writes to the page via mmap after the i_size has been changed.
The function must be called after i_size is updated so that page fault coming after we unlock the page will already see the new i_size. The function must be called while we still hold i_rwsem - this not only makes sure i_size is stable but also that userspace cannot observe new i_size value before we are prepared to store mmap writes at new inode size.
-
void truncate_pagecache_range(struct inode *inode, loff_t lstart, loff_t lend)¶
unmap and remove pagecache that is hole-punched
Parameters
struct inode *inode
inode
loff_t lstart
offset of beginning of hole
loff_t lend
offset of last byte of hole
Description
This function should typically be called before the filesystem releases resources associated with the freed range (eg. deallocates blocks). This way, pagecache will always stay logically coherent with on-disk format, and the filesystem would not have to deal with situations such as writepage being called for a page that has already had its underlying blocks deallocated.
-
void filemap_set_wb_err(struct address_space *mapping, int err)¶
set a writeback error on an address_space
Parameters
struct address_space *mapping
mapping in which to set writeback error
int err
error to be set in mapping
Description
When writeback fails in some way, we must record that error so that userspace can be informed when fsync and the like are called. We endeavor to report errors on any file that was open at the time of the error. Some internal callers also need to know when writeback errors have occurred.
When a writeback error occurs, most filesystems will want to call filemap_set_wb_err to record the error in the mapping so that it will be automatically reported whenever fsync is called on the file.
-
int filemap_check_wb_err(struct address_space *mapping, errseq_t since)¶
has an error occurred since the mark was sampled?
Parameters
struct address_space *mapping
mapping to check for writeback errors
errseq_t since
previously-sampled errseq_t
Description
Grab the errseq_t value from the mapping, and see if it has changed "since" the given value was sampled.
If it has then report the latest error set, otherwise return 0.
-
errseq_t filemap_sample_wb_err(struct address_space *mapping)¶
sample the current errseq_t to test for later errors
Parameters
struct address_space *mapping
mapping to be sampled
Description
Writeback errors are always reported relative to a particular sample point in the past. This function provides those sample points.
-
errseq_t file_sample_sb_err(struct file *file)¶
sample the current errseq_t to test for later errors
Parameters
struct file *file
file pointer to be sampled
Description
Grab the most current superblock-level errseq_t value for the given struct file.
-
void mapping_set_error(struct address_space *mapping, int error)¶
record a writeback error in the address_space
Parameters
struct address_space *mapping
the mapping in which an error should be set
int error
the error to set in the mapping
Description
When writeback fails in some way, we must record that error so that userspace can be informed when fsync and the like are called. We endeavor to report errors on any file that was open at the time of the error. Some internal callers also need to know when writeback errors have occurred.
When a writeback error occurs, most filesystems will want to call mapping_set_error to record the error in the mapping so that it can be reported when the application calls fsync(2).
-
void mapping_set_large_folios(struct address_space *mapping)¶
Indicate the file supports large folios.
Parameters
struct address_space *mapping
The file.
Description
The filesystem should call this function in its inode constructor to indicate that the VFS can use large folios to cache the contents of the file.
Context
This should not be called while the inode is active as it is non-atomic.
-
struct address_space *folio_file_mapping(struct folio *folio)¶
Find the mapping this folio belongs to.
Parameters
struct folio *folio
The folio.
Description
For folios which are in the page cache, return the mapping that this
page belongs to. Folios in the swap cache return the mapping of the
swap file or swap device where the data is stored. This is different
from the mapping returned by folio_mapping()
. The only reason to
use it is if, like NFS, you return 0 from ->activate_swapfile.
Do not call this for folios which aren't in the page cache or swap cache.
-
struct address_space *folio_flush_mapping(struct folio *folio)¶
Find the file mapping this folio belongs to.
Parameters
struct folio *folio
The folio.
Description
For folios which are in the page cache, return the mapping that this page belongs to. Anonymous folios return NULL, even if they're in the swap cache. Other kinds of folio also return NULL.
This is ONLY used by architecture cache flushing code. If you aren't
writing cache flushing code, you want either folio_mapping()
or
folio_file_mapping()
.
Parameters
struct folio *folio
The folio.
Description
For folios which are in the page cache, return the inode that this folio belongs to.
Do not call this for folios which aren't in the page cache.
Parameters
struct folio *folio
Folio to attach data to.
void *data
Data to attach to folio.
Description
Attaching private data to a folio increments the page's reference count. The data must be detached before the folio will be freed.
Parameters
struct folio *folio
Folio to change the data on.
void *data
Data to set on the folio.
Description
Change the private data attached to a folio and return the old data. The page must previously have had data attached and the data must be detached before the folio will be freed.
Return
Data that was previously attached to the folio.
Parameters
struct folio *folio
Folio to detach data from.
Description
Removes the data that was previously attached to the folio and decrements the refcount on the page.
Return
Data that was attached to the folio.
-
type fgf_t¶
Flags for getting folios from the page cache.
Description
Most users of the page cache will not need to use these flags;
there are convenience functions such as filemap_get_folio()
and
filemap_lock_folio()
. For users which need more control over exactly
what is done with the folios, these flags to __filemap_get_folio()
are available.
FGP_ACCESSED
- The folio will be marked accessed.FGP_LOCK
- The folio is returned locked.FGP_CREAT
- If no folio is present then a new folio is allocated, added to the page cache and the VM's LRU list. The folio is returned locked.FGP_FOR_MMAP
- The caller wants to do its own locking dance if the folio is already in cache. If the folio was allocated, unlock it before returning so the caller can do the same dance.FGP_WRITE
- The folio will be written to by the caller.FGP_NOFS
- __GFP_FS will get cleared in gfp.FGP_NOWAIT
- Don't block on the folio lock.FGP_STABLE
- Wait for the folio to be stable (finished writeback)FGP_WRITEBEGIN
- The flags to use in a filesystem write_begin() implementation.
Parameters
size_t size
The suggested size of the folio to create.
Description
The caller of __filemap_get_folio()
can use this to suggest a preferred
size for the folio that is created. If there is already a folio at
the index, it will be returned, no matter what its size. If a folio
is freshly created, it may be of a different size than requested
due to alignment constraints, memory pressure, or the presence of
other folios at nearby indices.
-
struct folio *filemap_get_folio(struct address_space *mapping, pgoff_t index)¶
Find and get a folio.
Parameters
struct address_space *mapping
The address_space to search.
pgoff_t index
The page index.
Description
Looks up the page cache entry at mapping & index. If a folio is present, it is returned with an increased refcount.
Return
A folio or ERR_PTR(-ENOENT) if there is no folio in the cache for this index. Will not return a shadow, swap or DAX entry.
-
struct folio *filemap_lock_folio(struct address_space *mapping, pgoff_t index)¶
Find and lock a folio.
Parameters
struct address_space *mapping
The address_space to search.
pgoff_t index
The page index.
Description
Looks up the page cache entry at mapping & index. If a folio is present, it is returned locked with an increased refcount.
Context
May sleep.
Return
A folio or ERR_PTR(-ENOENT) if there is no folio in the cache for this index. Will not return a shadow, swap or DAX entry.
-
struct folio *filemap_grab_folio(struct address_space *mapping, pgoff_t index)¶
grab a folio from the page cache
Parameters
struct address_space *mapping
The address space to search
pgoff_t index
The page index
Description
Looks up the page cache entry at mapping & index. If no folio is found, a new folio is created. The folio is locked, marked as accessed, and returned.
Return
A found or created folio. ERR_PTR(-ENOMEM) if no folio is found and failed to create a folio.
-
struct page *find_get_page(struct address_space *mapping, pgoff_t offset)¶
find and get a page reference
Parameters
struct address_space *mapping
the address_space to search
pgoff_t offset
the page index
Description
Looks up the page cache slot at mapping & offset. If there is a page cache page, it is returned with an increased refcount.
Otherwise, NULL
is returned.
-
struct page *find_lock_page(struct address_space *mapping, pgoff_t index)¶
locate, pin and lock a pagecache page
Parameters
struct address_space *mapping
the address_space to search
pgoff_t index
the page index
Description
Looks up the page cache entry at mapping & index. If there is a page cache page, it is returned locked and with an increased refcount.
Context
May sleep.
Return
A struct page or NULL
if there is no page in the cache for this
index.
-
struct page *find_or_create_page(struct address_space *mapping, pgoff_t index, gfp_t gfp_mask)¶
locate or add a pagecache page
Parameters
struct address_space *mapping
the page's address_space
pgoff_t index
the page's index into the mapping
gfp_t gfp_mask
page allocation mode
Description
Looks up the page cache slot at mapping & offset. If there is a page cache page, it is returned locked and with an increased refcount.
If the page is not present, a new page is allocated using gfp_mask and added to the page cache and the VM's LRU list. The page is returned locked and with an increased refcount.
On memory exhaustion, NULL
is returned.
find_or_create_page()
may sleep, even if gfp_flags specifies an
atomic allocation!
-
struct page *grab_cache_page_nowait(struct address_space *mapping, pgoff_t index)¶
returns locked page at given index in given cache
Parameters
struct address_space *mapping
target address_space
pgoff_t index
the page index
Description
Same as grab_cache_page(), but do not wait if the page is unavailable. This is intended for speculative data generators, where the data can be regenerated if the page couldn't be grabbed. This routine should be safe to call while holding the lock for another page.
Clear __GFP_FS when allocating the page to avoid recursion into the fs and deadlock against the caller's locked page.
Parameters
struct folio *folio
The folio.
Description
For a folio which is either in the page cache or the swap cache, return its index within the address_space it belongs to. If you know the page is definitely in the page cache, you can look at the folio's index directly.
Return
The index (offset in units of pages) of a folio in its file.
Parameters
struct folio *folio
The current folio.
Return
The index of the folio which follows this folio in the file.
Parameters
struct folio *folio
The folio which contains this index.
pgoff_t index
The index we want to look up.
Description
Sometimes after looking up a folio in the page cache, we need to obtain the specific page for an index (eg a page fault).
Return
The page containing the file data for this index.
Parameters
struct folio *folio
The folio.
pgoff_t index
The page index within the file.
Context
The caller should have the page locked in order to prevent (eg) shmem from moving the page between the page cache and swap cache and changing its index in the middle of the operation.
Return
true or false.
Parameters
struct folio *folio
The folio.
Parameters
struct folio *folio
The folio.
Description
This differs from folio_pos()
for folios which belong to a swap file.
NFS is the only filesystem today which needs to use folio_file_pos()
.
Parameters
struct folio *folio
The folio to attempt to lock.
Description
Sometimes it is undesirable to wait for a folio to be unlocked (eg
when the locks are being taken in the wrong order, or if making
progress through a batch of folios is more important than processing
them in order). Usually folio_lock()
is the correct function to call.
Context
Any context.
Return
Whether the lock was successfully acquired.
Parameters
struct folio *folio
The folio to lock.
Description
The folio lock protects against many things, probably more than it should. It is primarily held while a folio is being brought uptodate, either from its backing file or from swap. It is also held while a folio is being truncated from its address_space, so holding the lock is sufficient to keep folio->mapping stable.
The folio lock is also held while write() is modifying the page to provide POSIX atomicity guarantees (as long as the write does not cross a page boundary). Other modifications to the data in the folio do not hold the folio lock and can race with writes, eg DMA and stores to mapped pages.
Context
May sleep. If you need to acquire the locks of two or more folios, they must be in order of ascending index, if they are in the same address_space. If they are in different address_spaces, acquire the lock of the folio which belongs to the address_space which has the lowest address in memory first.
Parameters
struct page *page
The page to lock.
Description
See folio_lock()
for a description of what the lock protects.
This is a legacy function and new code should probably use folio_lock()
instead.
Context
May sleep. Pages in the same folio share a lock, so do not attempt to lock two pages which share a folio.
Parameters
struct folio *folio
The folio to lock.
Description
Attempts to lock the folio, like folio_lock()
, except that the sleep
to acquire the lock is interruptible by a fatal signal.
Context
May sleep; see folio_lock()
.
Return
0 if the lock was acquired; -EINTR if a fatal signal was received.
-
bool filemap_range_needs_writeback(struct address_space *mapping, loff_t start_byte, loff_t end_byte)¶
check if range potentially needs writeback
Parameters
struct address_space *mapping
address space within which to check
loff_t start_byte
offset in bytes where the range starts
loff_t end_byte
offset in bytes where the range ends (inclusive)
Description
Find at least one page in the range supplied, usually used to check if
direct writing in this range will trigger a writeback. Used by O_DIRECT
read/write with IOCB_NOWAIT, to see if the caller needs to do
filemap_write_and_wait_range()
before proceeding.
Return
true
if the caller should do filemap_write_and_wait_range()
before
doing O_DIRECT to a page in this range, false
otherwise.
-
struct readahead_control¶
Describes a readahead request.
Definition:
struct readahead_control {
struct file *file;
struct address_space *mapping;
struct file_ra_state *ra;
};
Members
file
The file, used primarily by network filesystems for authentication. May be NULL if invoked internally by the filesystem.
mapping
Readahead this filesystem object.
ra
File readahead state. May be NULL.
Description
A readahead request is for consecutive pages. Filesystems which
implement the ->readahead method should call readahead_page()
or
readahead_page_batch()
in a loop and attempt to start I/O against
each page in the request.
Most of the fields in this struct are private and should be accessed by the functions below.
-
void page_cache_sync_readahead(struct address_space *mapping, struct file_ra_state *ra, struct file *file, pgoff_t index, unsigned long req_count)¶
generic file readahead
Parameters
struct address_space *mapping
address_space which holds the pagecache and I/O vectors
struct file_ra_state *ra
file_ra_state which holds the readahead state
struct file *file
Used by the filesystem for authentication.
pgoff_t index
Index of first page to be read.
unsigned long req_count
Total number of pages being read by the caller.
Description
page_cache_sync_readahead()
should be called when a cache miss happened:
it will submit the read. The readahead logic may decide to piggyback more
pages onto the read request if access patterns suggest it will improve
performance.
-
void page_cache_async_readahead(struct address_space *mapping, struct file_ra_state *ra, struct file *file, struct folio *folio, pgoff_t index, unsigned long req_count)¶
file readahead for marked pages
Parameters
struct address_space *mapping
address_space which holds the pagecache and I/O vectors
struct file_ra_state *ra
file_ra_state which holds the readahead state
struct file *file
Used by the filesystem for authentication.
struct folio *folio
The folio at index which triggered the readahead call.
pgoff_t index
Index of first page to be read.
unsigned long req_count
Total number of pages being read by the caller.
Description
page_cache_async_readahead()
should be called when a page is used which
is marked as PageReadahead; this is a marker to suggest that the application
has used up enough of the readahead window that we should start pulling in
more pages.
-
struct page *readahead_page(struct readahead_control *ractl)¶
Get the next page to read.
Parameters
struct readahead_control *ractl
The current readahead request.
Context
The page is locked and has an elevated refcount. The caller should decreases the refcount once the page has been submitted for I/O and unlock the page once all I/O to that page has completed.
Return
A pointer to the next page, or NULL
if we are done.
-
struct folio *readahead_folio(struct readahead_control *ractl)¶
Get the next folio to read.
Parameters
struct readahead_control *ractl
The current readahead request.
Context
The folio is locked. The caller should unlock the folio once all I/O to that folio has completed.
Return
A pointer to the next folio, or NULL
if we are done.
-
readahead_page_batch¶
readahead_page_batch (rac, array)
Get a batch of pages to read.
Parameters
rac
The current readahead request.
array
An array of pointers to struct page.
Context
The pages are locked and have an elevated refcount. The caller should decreases the refcount once the page has been submitted for I/O and unlock the page once all I/O to that page has completed.
Return
The number of pages placed in the array. 0 indicates the request is complete.
-
loff_t readahead_pos(struct readahead_control *rac)¶
The byte offset into the file of this readahead request.
Parameters
struct readahead_control *rac
The readahead request.
-
size_t readahead_length(struct readahead_control *rac)¶
The number of bytes in this readahead request.
Parameters
struct readahead_control *rac
The readahead request.
-
pgoff_t readahead_index(struct readahead_control *rac)¶
The index of the first page in this readahead request.
Parameters
struct readahead_control *rac
The readahead request.
-
unsigned int readahead_count(struct readahead_control *rac)¶
The number of pages in this readahead request.
Parameters
struct readahead_control *rac
The readahead request.
-
size_t readahead_batch_length(struct readahead_control *rac)¶
The number of bytes in the current batch.
Parameters
struct readahead_control *rac
The readahead request.
-
ssize_t folio_mkwrite_check_truncate(struct folio *folio, struct inode *inode)¶
check if folio was truncated
Parameters
struct folio *folio
the folio to check
struct inode *inode
the inode to check the folio against
Return
the number of bytes in the folio up to EOF, or -EFAULT if the folio was truncated.
-
int page_mkwrite_check_truncate(struct page *page, struct inode *inode)¶
check if page was truncated
Parameters
struct page *page
the page to check
struct inode *inode
the inode to check the page against
Description
Returns the number of bytes in the page up to EOF, or -EFAULT if the page was truncated.
-
unsigned int i_blocks_per_folio(struct inode *inode, struct folio *folio)¶
How many blocks fit in this folio.
Parameters
struct inode *inode
The inode which contains the blocks.
struct folio *folio
The folio.
Description
If the block size is larger than the size of this folio, return zero.
Context
The caller should hold a refcount on the folio to prevent it from being split.
Return
The number of filesystem blocks covered by this folio.
Memory pools¶
-
void mempool_exit(mempool_t *pool)¶
exit a mempool initialized with
mempool_init()
Parameters
mempool_t *pool
pointer to the memory pool which was initialized with
mempool_init()
.
Description
Free all reserved elements in pool and pool itself. This function only sleeps if the free_fn() function sleeps.
May be called on a zeroed but uninitialized mempool (i.e. allocated with
kzalloc()
).
-
void mempool_destroy(mempool_t *pool)¶
deallocate a memory pool
Parameters
mempool_t *pool
pointer to the memory pool which was allocated via
mempool_create()
.
Description
Free all reserved elements in pool and pool itself. This function only sleeps if the free_fn() function sleeps.
-
int mempool_init(mempool_t *pool, int min_nr, mempool_alloc_t *alloc_fn, mempool_free_t *free_fn, void *pool_data)¶
initialize a memory pool
Parameters
mempool_t *pool
pointer to the memory pool that should be initialized
int min_nr
the minimum number of elements guaranteed to be allocated for this pool.
mempool_alloc_t *alloc_fn
user-defined element-allocation function.
mempool_free_t *free_fn
user-defined element-freeing function.
void *pool_data
optional private data available to the user-defined functions.
Description
Like mempool_create()
, but initializes the pool in (i.e. embedded in another
structure).
Return
0
on success, negative error code otherwise.
-
mempool_t *mempool_create(int min_nr, mempool_alloc_t *alloc_fn, mempool_free_t *free_fn, void *pool_data)¶
create a memory pool
Parameters
int min_nr
the minimum number of elements guaranteed to be allocated for this pool.
mempool_alloc_t *alloc_fn
user-defined element-allocation function.
mempool_free_t *free_fn
user-defined element-freeing function.
void *pool_data
optional private data available to the user-defined functions.
Description
this function creates and allocates a guaranteed size, preallocated
memory pool. The pool can be used from the mempool_alloc()
and mempool_free()
functions. This function might sleep. Both the alloc_fn() and the free_fn()
functions might sleep - as long as the mempool_alloc()
function is not called
from IRQ contexts.
Return
pointer to the created memory pool object or NULL
on error.
-
int mempool_resize(mempool_t *pool, int new_min_nr)¶
resize an existing memory pool
Parameters
mempool_t *pool
pointer to the memory pool which was allocated via
mempool_create()
.int new_min_nr
the new minimum number of elements guaranteed to be allocated for this pool.
Description
This function shrinks/grows the pool. In the case of growing,
it cannot be guaranteed that the pool will be grown to the new
size immediately, but new mempool_free()
calls will refill it.
This function may sleep.
Note, the caller must guarantee that no mempool_destroy is called
while this function is running. mempool_alloc()
& mempool_free()
might be called (eg. from IRQ contexts) while this function executes.
Return
0
on success, negative error code otherwise.
-
void *mempool_alloc(mempool_t *pool, gfp_t gfp_mask)¶
allocate an element from a specific memory pool
Parameters
mempool_t *pool
pointer to the memory pool which was allocated via
mempool_create()
.gfp_t gfp_mask
the usual allocation bitmask.
Description
this function only sleeps if the alloc_fn() function sleeps or returns NULL. Note that due to preallocation, this function never fails when called from process contexts. (it might fail if called from an IRQ context.)
Note
using __GFP_ZERO is not supported.
Return
pointer to the allocated element or NULL
on error.
-
void *mempool_alloc_preallocated(mempool_t *pool)¶
allocate an element from preallocated elements belonging to a specific memory pool
Parameters
mempool_t *pool
pointer to the memory pool which was allocated via
mempool_create()
.
Description
This function is similar to mempool_alloc, but it only attempts allocating an element from the preallocated elements. It does not sleep and immediately returns if no preallocated elements are available.
Return
pointer to the allocated element or NULL
if no elements are
available.
-
void mempool_free(void *element, mempool_t *pool)¶
return an element to the pool.
Parameters
void *element
pool element pointer.
mempool_t *pool
pointer to the memory pool which was allocated via
mempool_create()
.
Description
this function only sleeps if the free_fn() function sleeps.
DMA pools¶
-
struct dma_pool *dma_pool_create(const char *name, struct device *dev, size_t size, size_t align, size_t boundary)¶
Creates a pool of consistent memory blocks, for dma.
Parameters
const char *name
name of pool, for diagnostics
struct device *dev
device that will be doing the DMA
size_t size
size of the blocks in this pool.
size_t align
alignment requirement for blocks; must be a power of two
size_t boundary
returned blocks won't cross this power of two boundary
Context
not in_interrupt()
Description
Given one of these pools, dma_pool_alloc()
may be used to allocate memory. Such memory will all have "consistent"
DMA mappings, accessible by the device and its driver without using
cache flushing primitives. The actual size of blocks allocated may be
larger than requested because of alignment.
If boundary is nonzero, objects returned from dma_pool_alloc()
won't
cross that size boundary. This is useful for devices which have
addressing restrictions on individual DMA transfers, such as not crossing
boundaries of 4KBytes.
Return
a dma allocation pool with the requested characteristics, or
NULL
if one can't be created.
-
void dma_pool_destroy(struct dma_pool *pool)¶
destroys a pool of dma memory blocks.
Parameters
struct dma_pool *pool
dma pool that will be destroyed
Context
!in_interrupt()
Description
Caller guarantees that no more memory from the pool is in use, and that nothing will try to use the pool after this call.
-
void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags, dma_addr_t *handle)¶
get a block of consistent memory
Parameters
struct dma_pool *pool
dma pool that will produce the block
gfp_t mem_flags
GFP_* bitmask
dma_addr_t *handle
pointer to dma address of block
Return
the kernel virtual address of a currently unused block,
and reports its dma address through the handle.
If such a memory block can't be allocated, NULL
is returned.
-
void dma_pool_free(struct dma_pool *pool, void *vaddr, dma_addr_t dma)¶
put block back into dma pool
Parameters
struct dma_pool *pool
the dma pool holding the block
void *vaddr
virtual address of block
dma_addr_t dma
dma address of block
Description
Caller promises neither device nor driver will again touch this block unless it is first re-allocated.
-
struct dma_pool *dmam_pool_create(const char *name, struct device *dev, size_t size, size_t align, size_t allocation)¶
Managed
dma_pool_create()
Parameters
const char *name
name of pool, for diagnostics
struct device *dev
device that will be doing the DMA
size_t size
size of the blocks in this pool.
size_t align
alignment requirement for blocks; must be a power of two
size_t allocation
returned blocks won't cross this boundary (or zero)
Description
Managed dma_pool_create()
. DMA pool created with this function is
automatically destroyed on driver detach.
Return
a managed dma allocation pool with the requested
characteristics, or NULL
if one can't be created.
-
void dmam_pool_destroy(struct dma_pool *pool)¶
Managed
dma_pool_destroy()
Parameters
struct dma_pool *pool
dma pool that will be destroyed
Description
Managed dma_pool_destroy()
.
More Memory Management Functions¶
-
void zap_vma_ptes(struct vm_area_struct *vma, unsigned long address, unsigned long size)¶
remove ptes mapping the vma
Parameters
struct vm_area_struct *vma
vm_area_struct holding ptes to be zapped
unsigned long address
starting address of pages to zap
unsigned long size
number of bytes to zap
Description
This function only unmaps ptes assigned to VM_PFNMAP vmas.
The entire address range must be fully contained within the vma.
-
int vm_insert_pages(struct vm_area_struct *vma, unsigned long addr, struct page **pages, unsigned long *num)¶
insert multiple pages into user vma, batching the pmd lock.
Parameters
struct vm_area_struct *vma
user vma to map to
unsigned long addr
target start user address of these pages
struct page **pages
source kernel pages
unsigned long *num
in: number of pages to map. out: number of pages that were not mapped. (0 means all pages were successfully mapped).
Description
Preferred over vm_insert_page()
when inserting multiple pages.
In case of error, we may have mapped a subset of the provided pages. It is the caller's responsibility to account for this case.
The same restrictions apply as in vm_insert_page()
.
-
int vm_insert_page(struct vm_area_struct *vma, unsigned long addr, struct page *page)¶
insert single page into user vma
Parameters
struct vm_area_struct *vma
user vma to map to
unsigned long addr
target user address of this page
struct page *page
source kernel page
Description
This allows drivers to insert individual pages they've allocated into a user vma.
The page has to be a nice clean _individual_ kernel allocation. If you allocate a compound page, you need to have marked it as such (__GFP_COMP), or manually just split the page up yourself (see split_page()).
NOTE! Traditionally this was done with "remap_pfn_range()
" which
took an arbitrary page protection parameter. This doesn't allow
that. Your vma protection will have to be set up correctly, which
means that if you want a shared writable mapping, you'd better
ask for a shared writable mapping!
The page does not need to be reserved.
Usually this function is called from f_op->mmap() handler under mm->mmap_lock write-lock, so it can change vma->vm_flags. Caller must set VM_MIXEDMAP on vma if it wants to call this function from other places, for example from page-fault handler.
Return
0
on success, negative error code otherwise.
-
int vm_map_pages(struct vm_area_struct *vma, struct page **pages, unsigned long num)¶
maps range of kernel pages starts with non zero offset
Parameters
struct vm_area_struct *vma
user vma to map to
struct page **pages
pointer to array of source kernel pages
unsigned long num
number of pages in page array
Description
Maps an object consisting of num pages, catering for the user's requested vm_pgoff
If we fail to insert any page into the vma, the function will return immediately leaving any previously inserted pages present. Callers from the mmap handler may immediately return the error as their caller will destroy the vma, removing any successfully inserted pages. Other callers should make their own arrangements for calling unmap_region().
Context
Process context. Called by mmap handlers.
Return
0 on success and error code otherwise.
-
int vm_map_pages_zero(struct vm_area_struct *vma, struct page **pages, unsigned long num)¶
map range of kernel pages starts with zero offset
Parameters
struct vm_area_struct *vma
user vma to map to
struct page **pages
pointer to array of source kernel pages
unsigned long num
number of pages in page array
Description
Similar to vm_map_pages()
, except that it explicitly sets the offset
to 0. This function is intended for the drivers that did not consider
vm_pgoff.
Context
Process context. Called by mmap handlers.
Return
0 on success and error code otherwise.
-
vm_fault_t vmf_insert_pfn_prot(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn, pgprot_t pgprot)¶
insert single pfn into user vma with specified pgprot
Parameters
struct vm_area_struct *vma
user vma to map to
unsigned long addr
target user address of this page
unsigned long pfn
source kernel pfn
pgprot_t pgprot
pgprot flags for the inserted page
Description
This is exactly like vmf_insert_pfn()
, except that it allows drivers
to override pgprot on a per-page basis.
This only makes sense for IO mappings, and it makes no sense for COW mappings. In general, using multiple vmas is preferable; vmf_insert_pfn_prot should only be used if using multiple VMAs is impractical.
pgprot typically only differs from vma->vm_page_prot when drivers set caching- and encryption bits different than those of vma->vm_page_prot, because the caching- or encryption mode may not be known at mmap() time.
This is ok as long as vma->vm_page_prot is not used by the core vm to set caching and encryption bits for those vmas (except for COW pages). This is ensured by core vm only modifying these page table entries using functions that don't touch caching- or encryption bits, using pte_modify() if needed. (See for example mprotect()).
Also when new page-table entries are created, this is only done using the fault() callback, and never using the value of vma->vm_page_prot, except for page-table entries that point to anonymous pages as the result of COW.
Context
Process context. May allocate using GFP_KERNEL
.
Return
vm_fault_t value.
-
vm_fault_t vmf_insert_pfn(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn)¶
insert single pfn into user vma
Parameters
struct vm_area_struct *vma
user vma to map to
unsigned long addr
target user address of this page
unsigned long pfn
source kernel pfn
Description
Similar to vm_insert_page, this allows drivers to insert individual pages they've allocated into a user vma. Same comments apply.
This function should only be called from a vm_ops->fault handler, and in that case the handler should return the result of this function.
vma cannot be a COW mapping.
As this is called only for pages that do not currently exist, we do not need to flush old virtual caches or the TLB.
Context
Process context. May allocate using GFP_KERNEL
.
Return
vm_fault_t value.
-
int remap_pfn_range(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn, unsigned long size, pgprot_t prot)¶
remap kernel memory to userspace
Parameters
struct vm_area_struct *vma
user vma to map to
unsigned long addr
target page aligned user address to start at
unsigned long pfn
page frame number of kernel physical memory address
unsigned long size
size of mapping area
pgprot_t prot
page protection flags for this mapping
Note
this is only safe if the mm semaphore is held when called.
Return
0
on success, negative error code otherwise.
-
int vm_iomap_memory(struct vm_area_struct *vma, phys_addr_t start, unsigned long len)¶
remap memory to userspace
Parameters
struct vm_area_struct *vma
user vma to map to
phys_addr_t start
start of the physical memory to be mapped
unsigned long len
size of area
Description
This is a simplified io_remap_pfn_range() for common driver use. The driver just needs to give us the physical memory range to be mapped, we'll figure out the rest from the vma information.
NOTE! Some drivers might want to tweak vma->vm_page_prot first to get whatever write-combining details or similar.
Return
0
on success, negative error code otherwise.
-
void unmap_mapping_pages(struct address_space *mapping, pgoff_t start, pgoff_t nr, bool even_cows)¶
Unmap pages from processes.
Parameters
struct address_space *mapping
The address space containing pages to be unmapped.
pgoff_t start
Index of first page to be unmapped.
pgoff_t nr
Number of pages to be unmapped. 0 to unmap to end of file.
bool even_cows
Whether to unmap even private COWed pages.
Description
Unmap the pages in this address space from any userspace process which has them mmaped. Generally, you want to remove COWed pages as well when a file is being truncated, but not when invalidating pages from the page cache.
-
void unmap_mapping_range(struct address_space *mapping, loff_t const holebegin, loff_t const holelen, int even_cows)¶
unmap the portion of all mmaps in the specified address_space corresponding to the specified byte range in the underlying file.
Parameters
struct address_space *mapping
the address space containing mmaps to be unmapped.
loff_t const holebegin
byte in first page to unmap, relative to the start of the underlying file. This will be rounded down to a PAGE_SIZE boundary. Note that this is different from
truncate_pagecache()
, which must keep the partial page. In contrast, we must get rid of partial pages.loff_t const holelen
size of prospective hole in bytes. This will be rounded up to a PAGE_SIZE boundary. A holelen of zero truncates to the end of the file.
int even_cows
1 when truncating a file, unmap even private COWed pages; but 0 when invalidating pagecache, don't throw away private data.
-
int follow_pte(struct mm_struct *mm, unsigned long address, pte_t **ptepp, spinlock_t **ptlp)¶
look up PTE at a user virtual address
Parameters
struct mm_struct *mm
the mm_struct of the target address space
unsigned long address
user virtual address
pte_t **ptepp
location to store found PTE
spinlock_t **ptlp
location to store the lock for the PTE
Description
On a successful return, the pointer to the PTE is stored in ptepp; the corresponding lock is taken and its location is stored in ptlp. The contents of the PTE are only stable until ptlp is released; any further use, if any, must be protected against invalidation with MMU notifiers.
Only IO mappings and raw PFN mappings are allowed. The mmap semaphore should be taken for read.
KVM uses this function. While it is arguably less bad than follow_pfn
,
it is not a good general-purpose API.
Return
zero on success, -ve otherwise.
-
int follow_pfn(struct vm_area_struct *vma, unsigned long address, unsigned long *pfn)¶
look up PFN at a user virtual address
Parameters
struct vm_area_struct *vma
memory mapping
unsigned long address
user virtual address
unsigned long *pfn
location to store found PFN
Description
Only IO mappings and raw PFN mappings are allowed.
This function does not allow the caller to read the permissions of the PTE. Do not use it.
Return
zero and the pfn at pfn on success, -ve otherwise.
-
int generic_access_phys(struct vm_area_struct *vma, unsigned long addr, void *buf, int len, int write)¶
generic implementation for iomem mmap access
Parameters
struct vm_area_struct *vma
the vma to access
unsigned long addr
userspace address, not relative offset within vma
void *buf
buffer to read/write
int len
length of transfer
int write
set to FOLL_WRITE when writing, otherwise reading
Description
This is a generic implementation for vm_operations_struct.access
for an
iomem mapping. This callback is used by access_process_vm() when the vma is
not page based.
-
unsigned long get_pfnblock_flags_mask(const struct page *page, unsigned long pfn, unsigned long mask)¶
Return the requested group of flags for the pageblock_nr_pages block of pages
Parameters
const struct page *page
The page within the block of interest
unsigned long pfn
The target page frame number
unsigned long mask
mask of bits that the caller is interested in
Return
pageblock_bits flags
-
void set_pfnblock_flags_mask(struct page *page, unsigned long flags, unsigned long pfn, unsigned long mask)¶
Set the requested group of flags for a pageblock_nr_pages block of pages
Parameters
struct page *page
The page within the block of interest
unsigned long flags
The flags to set
unsigned long pfn
The target page frame number
unsigned long mask
mask of bits that the caller is interested in
-
int split_free_page(struct page *free_page, unsigned int order, unsigned long split_pfn_offset)¶
split a free page at split_pfn_offset
Parameters
struct page *free_page
the original free page
unsigned int order
the order of the page
unsigned long split_pfn_offset
split offset within the page
Description
Return -ENOENT if the free page is changed, otherwise 0
It is used when the free page crosses two pageblocks with different migratetypes at split_pfn_offset within the page. The split free page will be put into separate migratetype lists afterwards. Otherwise, the function achieves nothing.
-
void __putback_isolated_page(struct page *page, unsigned int order, int mt)¶
Return a now-isolated page back where we got it
Parameters
struct page *page
Page that was isolated
unsigned int order
Order of the isolated page
int mt
The page's pageblock's migratetype
Description
This function is meant to return a page pulled from the free lists via __isolate_free_page back to the free lists they were pulled from.
-
void __free_pages(struct page *page, unsigned int order)¶
Free pages allocated with
alloc_pages()
.
Parameters
struct page *page
The page pointer returned from
alloc_pages()
.unsigned int order
The order of the allocation.
Description
This function can free multi-page allocations that are not compound pages. It does not check that the order passed in matches that of the allocation, so it is easy to leak memory. Freeing more memory than was allocated will probably emit a warning.
If the last reference to this page is speculative, it will be released
by put_page() which only frees the first page of a non-compound
allocation. To prevent the remaining pages from being leaked, we free
the subsequent pages here. If you want to use the page's reference
count to decide when to free the allocation, you should allocate a
compound page, and use put_page() instead of __free_pages()
.
Context
May be called in interrupt context or while holding a normal spinlock, but not in NMI context or while holding a raw spinlock.
-
void *alloc_pages_exact(size_t size, gfp_t gfp_mask)¶
allocate an exact number physically-contiguous pages.
Parameters
size_t size
the number of bytes to allocate
gfp_t gfp_mask
GFP flags for the allocation, must not contain __GFP_COMP
Description
This function is similar to alloc_pages()
, except that it allocates the
minimum number of pages to satisfy the request. alloc_pages()
can only
allocate memory in power-of-two pages.
This function is also limited by MAX_PAGE_ORDER.
Memory allocated by this function must be released by free_pages_exact()
.
Return
pointer to the allocated area or NULL
in case of error.
-
void *alloc_pages_exact_nid(int nid, size_t size, gfp_t gfp_mask)¶
allocate an exact number of physically-contiguous pages on a node.
Parameters
int nid
the preferred node ID where memory should be allocated
size_t size
the number of bytes to allocate
gfp_t gfp_mask
GFP flags for the allocation, must not contain __GFP_COMP
Description
Like alloc_pages_exact()
, but try to allocate on node nid first before falling
back.
Return
pointer to the allocated area or NULL
in case of error.
-
void free_pages_exact(void *virt, size_t size)¶
release memory allocated via
alloc_pages_exact()
Parameters
void *virt
the value returned by alloc_pages_exact.
size_t size
size of allocation, same value as passed to
alloc_pages_exact()
.
Description
Release the memory allocated by a previous call to alloc_pages_exact.
-
unsigned long nr_free_zone_pages(int offset)¶
count number of pages beyond high watermark
Parameters
int offset
The zone index of the highest zone
Description
nr_free_zone_pages()
counts the number of pages which are beyond the
high watermark within all zones at or below a given zone index. For each
zone, the number of pages is calculated as:
nr_free_zone_pages = managed_pages - high_pages
Return
number of pages beyond high watermark.
-
unsigned long nr_free_buffer_pages(void)¶
count number of pages beyond high watermark
Parameters
void
no arguments
Description
nr_free_buffer_pages()
counts the number of pages which are beyond the high
watermark within ZONE_DMA and ZONE_NORMAL.
Return
number of pages beyond high watermark within ZONE_DMA and ZONE_NORMAL.
-
int find_next_best_node(int node, nodemask_t *used_node_mask)¶
find the next node that should appear in a given node's fallback list
Parameters
int node
node whose fallback list we're appending
nodemask_t *used_node_mask
nodemask_t of already used nodes
Description
We use a number of factors to determine which is the next node that should appear on a given node's fallback list. The node should not have appeared already in node's fallback list, and it should be the next closest node according to the distance array (which contains arbitrary distance values from each node to each node in the system), and should also prefer nodes with no CPUs, since presumably they'll have very little allocation pressure on them otherwise.
Return
node id of the found node or NUMA_NO_NODE
if no node is found.
-
void setup_per_zone_wmarks(void)¶
called when min_free_kbytes changes or when memory is hot-{added|removed}
Parameters
void
no arguments
Description
Ensures that the watermark[min,low,high] values for each zone are set correctly with respect to min_free_kbytes.
-
int alloc_contig_range(unsigned long start, unsigned long end, unsigned migratetype, gfp_t gfp_mask)¶
tries to allocate given range of pages
Parameters
unsigned long start
start PFN to allocate
unsigned long end
one-past-the-last PFN to allocate
unsigned migratetype
migratetype of the underlying pageblocks (either #MIGRATE_MOVABLE or #MIGRATE_CMA). All pageblocks in range must have the same migratetype and it must be either of the two.
gfp_t gfp_mask
GFP mask to use during compaction
Description
The PFN range does not have to be pageblock aligned. The PFN range must belong to a single zone.
The first thing this routine does is attempt to MIGRATE_ISOLATE all pageblocks in the range. Once isolated, the pageblocks should not be modified by others.
Return
zero on success or negative error code. On success all pages which PFN is in [start, end) are allocated for the caller and need to be freed with free_contig_range().
-
struct page *alloc_contig_pages(unsigned long nr_pages, gfp_t gfp_mask, int nid, nodemask_t *nodemask)¶
tries to find and allocate contiguous range of pages
Parameters
unsigned long nr_pages
Number of contiguous pages to allocate
gfp_t gfp_mask
GFP mask to limit search and used during compaction
int nid
Target node
nodemask_t *nodemask
Mask for other possible nodes
Description
This routine is a wrapper around alloc_contig_range()
. It scans over zones
on an applicable zonelist to find a contiguous pfn range which can then be
tried for allocation with alloc_contig_range()
. This routine is intended
for allocation requests which can not be fulfilled with the buddy allocator.
The allocated memory is always aligned to a page boundary. If nr_pages is a power of two, then allocated range is also guaranteed to be aligned to same nr_pages (e.g. 1GB request would be aligned to 1GB).
Allocated pages can be freed with free_contig_range() or by manually calling __free_page() on each allocated page.
Return
pointer to contiguous pages on success, or NULL if not successful.
-
int numa_nearest_node(int node, unsigned int state)¶
Find nearest node by state
Parameters
int node
Node id to start the search
unsigned int state
State to filter the search
Description
Lookup the closest node by distance if nid is not in state.
Return
this node if it is in state, otherwise the closest node by distance
-
struct page *alloc_pages_mpol(gfp_t gfp, unsigned int order, struct mempolicy *pol, pgoff_t ilx, int nid)¶
Allocate pages according to NUMA mempolicy.
Parameters
gfp_t gfp
GFP flags.
unsigned int order
Order of the page allocation.
struct mempolicy *pol
Pointer to the NUMA mempolicy.
pgoff_t ilx
Index for interleave mempolicy (also distinguishes
alloc_pages()
).int nid
Preferred node (usually numa_node_id() but mpol may override it).
Return
The page on success or NULL if allocation fails.
-
struct folio *vma_alloc_folio(gfp_t gfp, int order, struct vm_area_struct *vma, unsigned long addr, bool hugepage)¶
Allocate a folio for a VMA.
Parameters
gfp_t gfp
GFP flags.
int order
Order of the folio.
struct vm_area_struct *vma
Pointer to VMA.
unsigned long addr
Virtual address of the allocation. Must be inside vma.
bool hugepage
Unused (was: For hugepages try only preferred node if possible).
Description
Allocate a folio for a specific address in vma, using the appropriate
NUMA policy. The caller must hold the mmap_lock of the mm_struct of the
VMA to prevent it from going away. Should be used for all allocations
for folios that will be mapped into user space, excepting hugetlbfs, and
excepting where direct use of alloc_pages_mpol()
is more appropriate.
Return
The folio on success or NULL if allocation fails.
-
struct page *alloc_pages(gfp_t gfp, unsigned int order)¶
Allocate pages.
Parameters
gfp_t gfp
GFP flags.
unsigned int order
Power of two of number of pages to allocate.
Description
Allocate 1 << order contiguous pages. The physical address of the first page is naturally aligned (eg an order-3 allocation will be aligned to a multiple of 8 * PAGE_SIZE bytes). The NUMA policy of the current process is honoured when in process context.
Context
Can be called from any context, providing the appropriate GFP flags are used.
Return
The page on success or NULL if allocation fails.
-
int mpol_misplaced(struct folio *folio, struct vm_area_struct *vma, unsigned long addr)¶
check whether current folio node is valid in policy
Parameters
struct folio *folio
folio to be checked
struct vm_area_struct *vma
vm area where folio mapped
unsigned long addr
virtual address in vma for shared policy lookup and interleave policy
Description
Lookup current policy node id for vma,addr and "compare to" folio's node id. Policy determination "mimics" alloc_page_vma(). Called from fault path where we know the vma and faulting address.
Return
NUMA_NO_NODE if the page is in a node that is valid for this policy, or a suitable node ID to allocate a replacement folio from.
initialize shared policy for inode
Parameters
struct shared_policy *sp
pointer to inode shared policy
struct mempolicy *mpol
struct mempolicy to install
Description
Install non-NULL mpol in inode's shared policy rb-tree. On entry, the current task has a reference on a non-NULL mpol. This must be released on exit. This is called at get_inode() calls and we can use GFP_KERNEL.
-
int mpol_parse_str(char *str, struct mempolicy **mpol)¶
parse string to mempolicy, for tmpfs mpol mount option.
Parameters
char *str
string containing mempolicy to parse
struct mempolicy **mpol
pointer to struct mempolicy pointer, returned on success.
Description
- Format of input:
<mode>[=<flags>][:<nodelist>]
Return
0
on success, else 1
-
void mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol)¶
format a mempolicy structure for printing
Parameters
char *buffer
to contain formatted mempolicy string
int maxlen
length of buffer
struct mempolicy *pol
pointer to mempolicy to be formatted
Description
Convert pol into a string. If buffer is too short, truncate the string. Recommend a maxlen of at least 32 for the longest mode, "interleave", the longest flag, "relative", and to display at least a few node ids.
-
struct folio¶
Represents a contiguous set of bytes.
Definition:
struct folio {
unsigned long flags;
union {
struct list_head lru;
unsigned int mlock_count;
};
struct address_space *mapping;
pgoff_t index;
union {
void *private;
swp_entry_t swap;
};
atomic_t _mapcount;
atomic_t _refcount;
#ifdef CONFIG_MEMCG;
unsigned long memcg_data;
#endif;
#if defined(WANT_PAGE_VIRTUAL);
void *virtual;
#endif;
#ifdef LAST_CPUPID_NOT_IN_PAGE_FLAGS;
int _last_cpupid;
#endif;
atomic_t _entire_mapcount;
atomic_t _nr_pages_mapped;
atomic_t _pincount;
#ifdef CONFIG_64BIT;
unsigned int _folio_nr_pages;
#endif;
void *_hugetlb_subpool;
void *_hugetlb_cgroup;
void *_hugetlb_cgroup_rsvd;
void *_hugetlb_hwpoison;
struct list_head _deferred_list;
};
Members
flags
Identical to the page flags.
{unnamed_union}
anonymous
lru
Least Recently Used list; tracks how recently this folio was used.
mlock_count
Number of times this folio has been pinned by mlock().
mapping
The file this page belongs to, or refers to the anon_vma for anonymous memory.
index
Offset within the file, in units of pages. For anonymous memory, this is the index from the beginning of the mmap.
{unnamed_union}
anonymous
private
Filesystem per-folio data (see
folio_attach_private()
).swap
Used for swp_entry_t if folio_test_swapcache().
_mapcount
Do not access this member directly. Use
folio_mapcount()
to find out how many times this folio is mapped by userspace._refcount
Do not access this member directly. Use
folio_ref_count()
to find how many references there are to this folio.memcg_data
Memory Control Group data.
virtual
Virtual address in the kernel direct map.
_last_cpupid
IDs of last CPU and last process that accessed the folio.
_entire_mapcount
Do not use directly, call folio_entire_mapcount().
_nr_pages_mapped
Do not use directly, call
folio_mapcount()
._pincount
Do not use directly, call
folio_maybe_dma_pinned()
._folio_nr_pages
Do not use directly, call
folio_nr_pages()
._hugetlb_subpool
Do not use directly, use accessor in hugetlb.h.
_hugetlb_cgroup
Do not use directly, use accessor in hugetlb_cgroup.h.
_hugetlb_cgroup_rsvd
Do not use directly, use accessor in hugetlb_cgroup.h.
_hugetlb_hwpoison
Do not use directly, call raw_hwp_list_head().
_deferred_list
Folios to be split under memory pressure.
Description
A folio is a physically, virtually and logically contiguous set
of bytes. It is a power-of-two in size, and it is aligned to that
same power-of-two. It is at least as large as PAGE_SIZE
. If it is
in the page cache, it is at a file offset which is a multiple of that
power-of-two. It may be mapped into userspace at an address which is
at an arbitrary page offset, but its kernel virtual address is aligned
to its size.
-
struct ptdesc¶
Memory descriptor for page tables.
Definition:
struct ptdesc {
unsigned long __page_flags;
union {
struct rcu_head pt_rcu_head;
struct list_head pt_list;
struct {
unsigned long _pt_pad_1;
pgtable_t pmd_huge_pte;
};
};
unsigned long __page_mapping;
union {
struct mm_struct *pt_mm;
atomic_t pt_frag_refcount;
};
union {
unsigned long _pt_pad_2;
#if ALLOC_SPLIT_PTLOCKS;
spinlock_t *ptl;
#else;
spinlock_t ptl;
#endif;
};
unsigned int __page_type;
atomic_t __page_refcount;
#ifdef CONFIG_MEMCG;
unsigned long pt_memcg_data;
#endif;
};
Members
__page_flags
Same as page flags. Unused for page tables.
{unnamed_union}
anonymous
pt_rcu_head
For freeing page table pages.
pt_list
List of used page tables. Used for s390 and x86.
{unnamed_struct}
anonymous
_pt_pad_1
Padding that aliases with page's compound head.
pmd_huge_pte
Protected by ptdesc->ptl, used for THPs.
__page_mapping
Aliases with page->mapping. Unused for page tables.
{unnamed_union}
anonymous
pt_mm
Used for x86 pgds.
pt_frag_refcount
For fragmented page table tracking. Powerpc only.
{unnamed_union}
anonymous
_pt_pad_2
Padding to ensure proper alignment.
ptl
Lock for the page table.
ptl
Lock for the page table.
__page_type
Same as page->page_type. Unused for page tables.
__page_refcount
Same as page refcount.
pt_memcg_data
Memcg data. Tracked for page tables here.
Description
This struct overlays struct page for now. Do not modify without a good understanding of the issues.
-
type vm_fault_t¶
Return type for page fault handlers.
Description
Page fault handlers return a bitmask of VM_FAULT
values.
-
enum vm_fault_reason¶
Page fault handlers return a bitmask of these values to tell the core VM what happened when handling the fault. Used to decide whether a process gets delivered SIGBUS or just gets major/minor fault counters bumped up.
Constants
VM_FAULT_OOM
Out Of Memory
VM_FAULT_SIGBUS
Bad access
VM_FAULT_MAJOR
Page read from storage
VM_FAULT_HWPOISON
Hit poisoned small page
VM_FAULT_HWPOISON_LARGE
Hit poisoned large page. Index encoded in upper bits
VM_FAULT_SIGSEGV
segmentation fault
VM_FAULT_NOPAGE
->fault installed the pte, not return page
VM_FAULT_LOCKED
->fault locked the returned page
VM_FAULT_RETRY
->fault blocked, must retry
VM_FAULT_FALLBACK
huge page fault failed, fall back to small
VM_FAULT_DONE_COW
->fault has fully handled COW
VM_FAULT_NEEDDSYNC
->fault did not modify page tables and needs fsync() to complete (for synchronous page faults in DAX)
VM_FAULT_COMPLETED
->fault completed, meanwhile mmap lock released
VM_FAULT_HINDEX_MASK
mask HINDEX value
-
enum fault_flag¶
Fault flag definitions.
Constants
FAULT_FLAG_WRITE
Fault was a write fault.
FAULT_FLAG_MKWRITE
Fault was mkwrite of existing PTE.
FAULT_FLAG_ALLOW_RETRY
Allow to retry the fault if blocked.
FAULT_FLAG_RETRY_NOWAIT
Don't drop mmap_lock and wait when retrying.
FAULT_FLAG_KILLABLE
The fault task is in SIGKILL killable region.
FAULT_FLAG_TRIED
The fault has been tried once.
FAULT_FLAG_USER
The fault originated in userspace.
FAULT_FLAG_REMOTE
The fault is not for current task/mm.
FAULT_FLAG_INSTRUCTION
The fault was during an instruction fetch.
FAULT_FLAG_INTERRUPTIBLE
The fault can be interrupted by non-fatal signals.
FAULT_FLAG_UNSHARE
The fault is an unsharing request to break COW in a COW mapping, making sure that an exclusive anon page is mapped after the fault.
FAULT_FLAG_ORIG_PTE_VALID
whether the fault has vmf->orig_pte cached. We should only access orig_pte if this flag set.
FAULT_FLAG_VMA_LOCK
The fault is handled under VMA lock.
Description
About FAULT_FLAG_ALLOW_RETRY and FAULT_FLAG_TRIED: we can specify whether we would allow page faults to retry by specifying these two fault flags correctly. Currently there can be three legal combinations:
- ALLOW_RETRY and !TRIED: this means the page fault allows retry, and
this is the first try
- ALLOW_RETRY and TRIED: this means the page fault allows retry, and
we've already tried at least once
!ALLOW_RETRY and !TRIED: this means the page fault does not allow retry
The unlisted combination (!ALLOW_RETRY && TRIED) is illegal and should never be used. Note that page faults can be allowed to retry for multiple times, in which case we'll have an initial fault with flags (a) then later on continuous faults with flags (b). We should always try to detect pending signals before a retry to make sure the continuous page faults can still be interrupted if necessary.
The combination FAULT_FLAG_WRITE|FAULT_FLAG_UNSHARE is illegal. FAULT_FLAG_UNSHARE is ignored and treated like an ordinary read fault when applied to mappings that are not COW mappings.
Parameters
struct folio *folio
The folio to test.
Description
We would like to get this info without a page flag, but the state needs to survive until the folio is last deleted from the LRU, which could be as far down as __page_cache_release.
Return
An integer (not a boolean!) used to sort a folio onto the right LRU list and to account folios correctly. 1 if folio is a regular filesystem backed page cache folio or a lazily freed anonymous folio (e.g. via MADV_FREE). 0 if folio is a normal anonymous folio, a tmpfs folio or otherwise ram or swap backed folio.
Parameters
struct folio *folio
The folio that was on lru and now has a zero reference.
Parameters
struct folio *folio
The folio to test.
Return
The LRU list a folio should be on, as an index into the array of LRU lists.
-
page_folio¶
page_folio (p)
Converts from page to folio.
Parameters
p
The page.
Description
Every page is part of a folio. This function cannot be called on a NULL pointer.
Context
No reference, nor lock is required on page. If the caller does not hold a reference, this call may race with a folio split, so it should re-check the folio still contains this page after gaining a reference on the folio.
Return
The folio which contains this page.
-
folio_page¶
folio_page (folio, n)
Return a page from a folio.
Parameters
folio
The folio.
n
The page number to return.
Description
n is relative to the start of the folio. This function does not check that the page number lies within folio; the caller is presumed to have a reference to the page.
Parameters
struct folio *folio
The folio.
unsigned long mask
Bits set in this word will be changed.
Description
This must only be used for flags which are changed with the folio lock held. For example, it is unsafe to use for PG_dirty as that can be set without the folio lock held. It can also only be used on flags which are in the range 0-6 as some of the implementations only affect those bits.
Return
Whether there are tasks waiting on the folio.
Parameters
struct folio *folio
The folio.
Description
The uptodate flag is set on a folio when every byte in the folio is at least as new as the corresponding bytes on storage. Anonymous and CoW folios are always uptodate. If the folio is not uptodate, some of the bytes in it may be; see the is_partially_uptodate() address_space operation.
Parameters
struct folio *folio
The folio to test.
Return
True if the folio is larger than one page.
Parameters
struct folio *folio
The folio to test.
Context
Any context. Caller should have a reference on the folio to prevent it from being turned into a tail page.
Return
True for hugetlbfs folios, false for anon folios or folios belonging to other filesystems.
Parameters
struct page *page
The page to be checked
Description
Determine if a page has private stuff, indicating that release routines should be invoked upon it.
-
bool fault_flag_allow_retry_first(enum fault_flag flags)¶
check ALLOW_RETRY the first time
Parameters
enum fault_flag flags
Fault flags.
Description
This is mostly used for places where we want to try to avoid taking the mmap_lock for too long a time when waiting for another condition to change, in which case we can try to be polite to release the mmap_lock in the first round to avoid potential starvation of other processes that would also want the mmap_lock.
Return
true if the page fault allows retry and this is the first attempt of the fault handling; false otherwise.
Parameters
struct folio *folio
The folio.
Description
A folio is composed of 2^order pages. See get_order() for the definition of order.
Return
The order of the folio.
Parameters
struct page *page
The page.
Description
The number of times this page is mapped. If this page is part of a large folio, it includes the number of times this page is mapped as part of that folio.
The result is undefined for pages which cannot be mapped into userspace. For example SLAB or special types of pages. See function page_has_type(). They use this field in struct page differently.
Parameters
struct folio *folio
The folio.
Description
A large folio tracks both how many times the entire folio is mapped, and how many times each individual page in the folio is mapped. This function calculates the total number of times the folio is mapped.
Return
The number of times this folio is mapped.
Parameters
struct folio *folio
The folio.
Return
True if any page in this folio is referenced by user page tables.
Parameters
struct page *page
Head page of a transparent huge page.
Parameters
struct page *page
Head page of a transparent huge page.
Return
Number of bytes in this page.
Parameters
struct folio *folio
The folio.
Context
May be called in any context, as long as you know that
you have a refcount on the folio. If you do not already have one,
folio_try_get()
may be the right interface for you to use.
Parameters
struct folio *folio
The folio.
Description
If the folio's reference count reaches zero, the memory will be
released back to the page allocator and may be used by another
allocation immediately. Do not access the memory or the struct folio
after calling folio_put()
unless you can be sure that it wasn't the
last reference.
Context
May be called in process or interrupt context, but not in NMI context. May be called while holding a spinlock.
Parameters
struct folio *folio
The folio.
int refs
The amount to subtract from the folio's reference count.
Description
If the folio's reference count reaches zero, the memory will be
released back to the page allocator and may be used by another
allocation immediately. Do not access the memory or the struct folio
after calling folio_put_refs()
unless you can be sure that these weren't
the last references.
Context
May be called in process or interrupt context, but not in NMI context. May be called while holding a spinlock.
-
void folios_put(struct folio **folios, unsigned int nr)¶
Decrement the reference count on an array of folios.
Parameters
struct folio **folios
The folios.
unsigned int nr
How many folios there are.
Description
Like folio_put()
, but for an array of folios. This is more efficient
than writing the loop yourself as it will optimise the locks which
need to be taken if the folios are freed.
Context
May be called in process or interrupt context, but not in NMI context. May be called while holding a spinlock.
Parameters
struct folio *folio
The folio.
Description
A folio may contain multiple pages. The pages have consecutive Page Frame Numbers.
Return
The Page Frame Number of the first page in the folio.
Parameters
struct folio *folio
The folio.
Description
This function checks if a folio has been pinned via a call to a function in the pin_user_pages() family.
For small folios, the return value is partially fuzzy: false is not fuzzy, because it means "definitely not pinned for DMA", but true means "probably pinned for DMA, but possibly a false positive due to having at least GUP_PIN_COUNTING_BIAS worth of normal folio references".
False positives are OK, because: a) it's unlikely for a folio to get that many refcounts, and b) all the callers of this routine are expected to be able to deal gracefully with a false positive.
For large folios, the result will be exactly correct. That's because we have more tracking data available: the _pincount field is used instead of the GUP_PIN_COUNTING_BIAS scheme.
For more information, please see pin_user_pages() and related calls.
Return
True, if it is likely that the page has been "dma-pinned". False, if the page is definitely not dma-pinned.
Parameters
const struct page *page
The page to query
Description
This returns true if page is one of the permanent zero pages.
Parameters
const struct folio *folio
The folio to query
Description
This returns true if folio is one of the permanent zero pages.
Parameters
struct folio *folio
The folio.
Return
A positive power of two.
Parameters
struct page *page
The head page of a huge page.
Parameters
struct folio *folio
The folio we're currently operating on.
Description
If you have physically contiguous memory which may span more than
one folio (eg a struct bio_vec
), use this function to move from one
folio to the next. Do not use it if the memory is only virtually
contiguous as the folios are almost certainly not adjacent to each
other. This is the folio equivalent to writing page++
.
Context
We assume that the folios are refcounted and/or locked at a higher level and do not adjust the reference counts.
Return
The next struct folio
.
Parameters
struct folio *folio
The folio.
Description
A folio represents a number of bytes which is a power-of-two in size.
This function tells you which power-of-two the folio is. See also
folio_size()
and folio_order()
.
Context
The caller should have a reference on the folio to prevent it from being split. It is not necessary for the folio to be locked.
Return
The base-2 logarithm of the size of this folio.
Parameters
struct folio *folio
The folio.
Context
The caller should have a reference on the folio to prevent it from being split. It is not necessary for the folio to be locked.
Return
The number of bytes in this folio.
Estimate the number of sharers of a folio.
Parameters
struct folio *folio
The folio.
Description
folio_estimated_sharers()
aims to serve as a function to efficiently
estimate the number of processes sharing a folio. This is done by
looking at the precise mapcount of the first subpage in the folio, and
assuming the other subpages are the same. This may not be true for large
folios. If you want exact mapcounts for exact calculations, look at
page_mapcount()
or folio_total_mapcount().
Return
The estimated number of processes sharing a folio.
Parameters
gfp_t gfp
GFP flags
unsigned int order
desired pagetable order
Description
pagetable_alloc allocates memory for page tables as well as a page table descriptor to describe that memory.
Return
The ptdesc describing the allocated page tables.
Parameters
struct ptdesc *pt
The page table descriptor
Description
pagetable_free frees the memory of all page tables described by a page table descriptor and the memory for the descriptor itself.
-
struct vm_area_struct *vma_lookup(struct mm_struct *mm, unsigned long addr)¶
Find a VMA at a specific address
Parameters
struct mm_struct *mm
The process address space.
unsigned long addr
The user address.
Return
The vm_area_struct at the given address, NULL
otherwise.
-
bool vma_is_special_huge(const struct vm_area_struct *vma)¶
Are transhuge page-table entries considered special?
Parameters
const struct vm_area_struct *vma
Pointer to the struct vm_area_struct to consider
Description
Whether transhuge page-table entries are considered "special" following the definition in vm_normal_page().
Return
true if transhuge page-table entries should be considered special, false otherwise.
-
int seal_check_write(int seals, struct vm_area_struct *vma)¶
Check for F_SEAL_WRITE or F_SEAL_FUTURE_WRITE flags and handle them.
Parameters
int seals
the seals to check
struct vm_area_struct *vma
the vma to operate on
Description
Check whether F_SEAL_WRITE or F_SEAL_FUTURE_WRITE are set; if so, do proper check/handling on the vma flags. Return 0 if check pass, or <0 for errors.
Parameters
const struct folio *folio
The folio.
Description
The refcount is usually incremented by calls to folio_get()
and
decremented by calls to folio_put()
. Some typical users of the
folio refcount:
Each reference from a page table
The page cache
Filesystem private data
The LRU list
Pipes
Direct IO which references this page in the process address space
Return
The number of references to this folio.
Parameters
struct folio *folio
The folio.
Description
If you do not already have a reference to a folio, you can attempt to get one using this function. It may fail if, for example, the folio has been freed since you found a pointer to it, or it is frozen for the purposes of splitting or migration.
Return
True if the reference count was successfully incremented.
Parameters
struct folio *folio
The folio.
Description
This is a version of folio_try_get()
optimised for non-SMP kernels.
If you are still holding the rcu_read_lock()
after looking up the
page and know that the page cannot have its refcount decreased to
zero in interrupt context, you can use this instead of folio_try_get()
.
Example users include get_user_pages_fast()
(as pages are not unmapped
from interrupt context) and the page cache lookups (as pages are not
truncated from interrupt context). We also know that pages are not
frozen in interrupt context for the purposes of splitting or migration.
You can also use this function if you're holding a lock that prevents
pages being frozen & removed; eg the i_pages lock for the page cache
or the mmap_lock or page table lock for page tables. In this case,
it will always succeed, and you could have used a plain folio_get()
,
but it's sometimes more convenient to have a common function called
from both locked and RCU-protected contexts.
Return
True if the reference count was successfully incremented.
-
int is_highmem(struct zone *zone)¶
helper function to quickly check if a struct zone is a highmem zone or not. This is an attempt to keep references to ZONE_{DMA/NORMAL/HIGHMEM/etc} in general code to a minimum.
Parameters
struct zone *zone
pointer to struct zone variable
Return
1 for a highmem zone, 0 otherwise
-
for_each_online_pgdat¶
for_each_online_pgdat (pgdat)
helper macro to iterate over all online nodes
Parameters
pgdat
pointer to a pg_data_t variable
-
for_each_zone¶
for_each_zone (zone)
helper macro to iterate over all memory zones
Parameters
zone
pointer to struct zone variable
Description
The user only needs to declare the zone variable, for_each_zone fills it in.
-
struct zoneref *next_zones_zonelist(struct zoneref *z, enum zone_type highest_zoneidx, nodemask_t *nodes)¶
Returns the next zone at or below highest_zoneidx within the allowed nodemask using a cursor within a zonelist as a starting point
Parameters
struct zoneref *z
The cursor used as a starting point for the search
enum zone_type highest_zoneidx
The zone index of the highest zone to return
nodemask_t *nodes
An optional nodemask to filter the zonelist with
Description
This function returns the next zone at or below a given zone index that is within the allowed nodemask using a cursor as the starting point for the search. The zoneref returned is a cursor that represents the current zone being examined. It should be advanced by one before calling next_zones_zonelist again.
Return
the next zone at or below highest_zoneidx within the allowed nodemask using a cursor within a zonelist as a starting point
-
struct zoneref *first_zones_zonelist(struct zonelist *zonelist, enum zone_type highest_zoneidx, nodemask_t *nodes)¶
Returns the first zone at or below highest_zoneidx within the allowed nodemask in a zonelist
Parameters
struct zonelist *zonelist
The zonelist to search for a suitable zone
enum zone_type highest_zoneidx
The zone index of the highest zone to return
nodemask_t *nodes
An optional nodemask to filter the zonelist with
Description
This function returns the first zone at or below a given zone index that is within the allowed nodemask. The zoneref returned is a cursor that can be used to iterate the zonelist with next_zones_zonelist by advancing it by one before calling.
When no eligible zone is found, zoneref->zone is NULL (zoneref itself is never NULL). This may happen either genuinely, or due to concurrent nodemask update due to cpuset modification.
Return
Zoneref pointer for the first suitable zone found
-
for_each_zone_zonelist_nodemask¶
for_each_zone_zonelist_nodemask (zone, z, zlist, highidx, nodemask)
helper macro to iterate over valid zones in a zonelist at or below a given zone index and within a nodemask
Parameters
zone
The current zone in the iterator
z
The current pointer within zonelist->_zonerefs being iterated
zlist
The zonelist being iterated
highidx
The zone index of the highest zone to return
nodemask
Nodemask allowed by the allocator
Description
This iterator iterates though all zones at or below a given zone index and within a given nodemask
-
for_each_zone_zonelist¶
for_each_zone_zonelist (zone, z, zlist, highidx)
helper macro to iterate over valid zones in a zonelist at or below a given zone index
Parameters
zone
The current zone in the iterator
z
The current pointer within zonelist->zones being iterated
zlist
The zonelist being iterated
highidx
The zone index of the highest zone to return
Description
This iterator iterates though all zones at or below a given zone index.
-
int pfn_valid(unsigned long pfn)¶
check if there is a valid memory map entry for a PFN
Parameters
unsigned long pfn
the page frame number to check
Description
Check if there is a valid memory map entry aka struct page for the pfn. Note, that availability of the memory map entry does not imply that there is actual usable memory at that pfn. The struct page may represent a hole or an unusable page frame.
Return
1 for PFNs that have memory map entries and 0 otherwise
-
struct address_space *folio_mapping(struct folio *folio)¶
Find the mapping where this folio is stored.
Parameters
struct folio *folio
The folio.
Description
For folios which are in the page cache, return the mapping that this page belongs to. Folios in the swap cache return the swap mapping this page is stored in (which is different from the mapping for the swap file or swap device where the data is stored).
You can call this for folios which aren't in the swap cache or page cache and it will return NULL.
-
int __anon_vma_prepare(struct vm_area_struct *vma)¶
attach an anon_vma to a memory region
Parameters
struct vm_area_struct *vma
the memory region in question
Description
This makes sure the memory mapping described by 'vma' has an 'anon_vma' attached to it, so that we can associate the anonymous pages mapped into it with that anon_vma.
The common case will be that we already have one, which is handled inline by anon_vma_prepare(). But if not we either need to find an adjacent mapping that we can re-use the anon_vma from (very common when the only reason for splitting a vma has been mprotect()), or we allocate a new one.
Anon-vma allocations are very subtle, because we may have optimistically looked up an anon_vma in folio_lock_anon_vma_read() and that may actually touch the rwsem even in the newly allocated vma (it depends on RCU to make sure that the anon_vma isn't actually destroyed).
As a result, we need to do proper anon_vma locking even for the new allocation. At the same time, we do not want to do any locking for the common case of already having an anon_vma.
This must be called with the mmap_lock held for reading.
-
int folio_referenced(struct folio *folio, int is_locked, struct mem_cgroup *memcg, unsigned long *vm_flags)¶
Test if the folio was referenced.
Parameters
struct folio *folio
The folio to test.
int is_locked
Caller holds lock on the folio.
struct mem_cgroup *memcg
target memory cgroup
unsigned long *vm_flags
A combination of all the vma->vm_flags which referenced the folio.
Description
Quick test_and_clear_referenced for all mappings of a folio,
Return
The number of mappings which referenced the folio. Return -1 if the function bailed out due to rmap lock contention.
-
int pfn_mkclean_range(unsigned long pfn, unsigned long nr_pages, pgoff_t pgoff, struct vm_area_struct *vma)¶
Cleans the PTEs (including PMDs) mapped with range of [pfn, pfn + nr_pages) at the specific offset (pgoff) within the vma of shared mappings. And since clean PTEs should also be readonly, write protects them too.
Parameters
unsigned long pfn
start pfn.
unsigned long nr_pages
number of physically contiguous pages srarting with pfn.
pgoff_t pgoff
page offset that the pfn mapped with.
struct vm_area_struct *vma
vma that pfn mapped within.
Description
Returns the number of cleaned PTEs (including PMDs).
-
void folio_move_anon_rmap(struct folio *folio, struct vm_area_struct *vma)¶
move a folio to our anon_vma
Parameters
struct folio *folio
The folio to move to our anon_vma
struct vm_area_struct *vma
The vma the folio belongs to
Description
When a folio belongs exclusively to one process after a COW event, that folio can be moved into the anon_vma that belongs to just that process, so the rmap code will not search the parent or sibling processes.
-
void __folio_set_anon(struct folio *folio, struct vm_area_struct *vma, unsigned long address, bool exclusive)¶
set up a new anonymous rmap for a folio
Parameters
struct folio *folio
The folio to set up the new anonymous rmap for.
struct vm_area_struct *vma
VM area to add the folio to.
unsigned long address
User virtual address of the mapping
bool exclusive
Whether the folio is exclusive to the process.
-
void __page_check_anon_rmap(struct folio *folio, struct page *page, struct vm_area_struct *vma, unsigned long address)¶
sanity check anonymous rmap addition
Parameters
struct folio *folio
The folio containing page.
struct page *page
the page to check the mapping of
struct vm_area_struct *vma
the vm area in which the mapping is added
unsigned long address
the user virtual address mapped
-
void folio_add_anon_rmap_ptes(struct folio *folio, struct page *page, int nr_pages, struct vm_area_struct *vma, unsigned long address, rmap_t flags)¶
add PTE mappings to a page range of an anon folio
Parameters
struct folio *folio
The folio to add the mappings to
struct page *page
The first page to add
int nr_pages
The number of pages which will be mapped
struct vm_area_struct *vma
The vm area in which the mappings are added
unsigned long address
The user virtual address of the first page to map
rmap_t flags
The rmap flags
Description
The page range of folio is defined by [first_page, first_page + nr_pages)
The caller needs to hold the page table lock, and the page must be locked in the anon_vma case: to serialize mapping,index checking after setting, and to ensure that an anon folio is not being upgraded racily to a KSM folio (but KSM folios are never downgraded).
-
void folio_add_anon_rmap_pmd(struct folio *folio, struct page *page, struct vm_area_struct *vma, unsigned long address, rmap_t flags)¶
add a PMD mapping to a page range of an anon folio
Parameters
struct folio *folio
The folio to add the mapping to
struct page *page
The first page to add
struct vm_area_struct *vma
The vm area in which the mapping is added
unsigned long address
The user virtual address of the first page to map
rmap_t flags
The rmap flags
Description
The page range of folio is defined by [first_page, first_page + HPAGE_PMD_NR)
The caller needs to hold the page table lock, and the page must be locked in the anon_vma case: to serialize mapping,index checking after setting.
-
void folio_add_new_anon_rmap(struct folio *folio, struct vm_area_struct *vma, unsigned long address)¶
Add mapping to a new anonymous folio.
Parameters
struct folio *folio
The folio to add the mapping to.
struct vm_area_struct *vma
the vm area in which the mapping is added
unsigned long address
the user virtual address mapped
Description
Like folio_add_anon_rmap_*() but must only be called on new folios. This means the inc-and-test can be bypassed. The folio does not have to be locked.
If the folio is pmd-mappable, it is accounted as a THP. As the folio is new, it's assumed to be mapped exclusively by a single process.
-
void folio_add_file_rmap_ptes(struct folio *folio, struct page *page, int nr_pages, struct vm_area_struct *vma)¶
add PTE mappings to a page range of a folio
Parameters
struct folio *folio
The folio to add the mappings to
struct page *page
The first page to add
int nr_pages
The number of pages that will be mapped using PTEs
struct vm_area_struct *vma
The vm area in which the mappings are added
Description
The page range of the folio is defined by [page, page + nr_pages)
The caller needs to hold the page table lock.
-
void folio_add_file_rmap_pmd(struct folio *folio, struct page *page, struct vm_area_struct *vma)¶
add a PMD mapping to a page range of a folio
Parameters
struct folio *folio
The folio to add the mapping to
struct page *page
The first page to add
struct vm_area_struct *vma
The vm area in which the mapping is added
Description
The page range of the folio is defined by [page, page + HPAGE_PMD_NR)
The caller needs to hold the page table lock.
-
void folio_remove_rmap_ptes(struct folio *folio, struct page *page, int nr_pages, struct vm_area_struct *vma)¶
remove PTE mappings from a page range of a folio
Parameters
struct folio *folio
The folio to remove the mappings from
struct page *page
The first page to remove
int nr_pages
The number of pages that will be removed from the mapping
struct vm_area_struct *vma
The vm area from which the mappings are removed
Description
The page range of the folio is defined by [page, page + nr_pages)
The caller needs to hold the page table lock.
-
void folio_remove_rmap_pmd(struct folio *folio, struct page *page, struct vm_area_struct *vma)¶
remove a PMD mapping from a page range of a folio
Parameters
struct folio *folio
The folio to remove the mapping from
struct page *page
The first page to remove
struct vm_area_struct *vma
The vm area from which the mapping is removed
Description
The page range of the folio is defined by [page, page + HPAGE_PMD_NR)
The caller needs to hold the page table lock.
-
void try_to_unmap(struct folio *folio, enum ttu_flags flags)¶
Try to remove all page table mappings to a folio.
Parameters
struct folio *folio
The folio to unmap.
enum ttu_flags flags
action and flags
Description
Tries to remove all the page table entries which are mapping this folio. It is the caller's responsibility to check if the folio is still mapped if needed (use TTU_SYNC to prevent accounting races).
Context
Caller must hold the folio lock.
-
void try_to_migrate(struct folio *folio, enum ttu_flags flags)¶
try to replace all page table mappings with swap entries
Parameters
struct folio *folio
the folio to replace page table entries for
enum ttu_flags flags
action and flags
Description
Tries to remove all the page table entries which are mapping this folio and replace them with special swap entries. Caller must hold the folio lock.
-
bool folio_make_device_exclusive(struct folio *folio, struct mm_struct *mm, unsigned long address, void *owner)¶
Mark the folio exclusively owned by a device.
Parameters
struct folio *folio
The folio to replace page table entries for.
struct mm_struct *mm
The mm_struct where the folio is expected to be mapped.
unsigned long address
Address where the folio is expected to be mapped.
void *owner
passed to MMU_NOTIFY_EXCLUSIVE range notifier callbacks
Description
Tries to remove all the page table entries which are mapping this folio and replace them with special device exclusive swap entries to grant a device exclusive access to the folio.
Context
Caller must hold the folio lock.
Return
false if the page is still mapped, or if it could not be unmapped from the expected address. Otherwise returns true (success).
-
int make_device_exclusive_range(struct mm_struct *mm, unsigned long start, unsigned long end, struct page **pages, void *owner)¶
Mark a range for exclusive use by a device
Parameters
struct mm_struct *mm
mm_struct of associated target process
unsigned long start
start of the region to mark for exclusive device access
unsigned long end
end address of region
struct page **pages
returns the pages which were successfully marked for exclusive access
void *owner
passed to MMU_NOTIFY_EXCLUSIVE range notifier to allow filtering
Return
number of pages found in the range by GUP. A page is marked for exclusive access only if the page pointer is non-NULL.
Description
This function finds ptes mapping page(s) to the given address range, locks them and replaces mappings with special swap entries preventing userspace CPU access. On fault these entries are replaced with the original mapping after calling MMU notifiers.
A driver using this to program access from a device must use a mmu notifier critical section to hold a device specific lock during programming. Once programming is complete it should drop the page lock and reference after which point CPU access to the page will revoke the exclusive access.
-
int migrate_folio(struct address_space *mapping, struct folio *dst, struct folio *src, enum migrate_mode mode)¶
Simple folio migration.
Parameters
struct address_space *mapping
The address_space containing the folio.
struct folio *dst
The folio to migrate the data to.
struct folio *src
The folio containing the current data.
enum migrate_mode mode
How to migrate the page.
Description
Common logic to directly migrate a single LRU folio suitable for folios that do not use PagePrivate/PagePrivate2.
Folios are locked upon entry and exit.
-
int buffer_migrate_folio(struct address_space *mapping, struct folio *dst, struct folio *src, enum migrate_mode mode)¶
Migration function for folios with buffers.
Parameters
struct address_space *mapping
The address space containing src.
struct folio *dst
The folio to migrate to.
struct folio *src
The folio to migrate from.
enum migrate_mode mode
How to migrate the folio.
Description
This function can only be used if the underlying filesystem guarantees
that no other references to src exist. For example attached buffer
heads are accessed only under the folio lock. If your filesystem cannot
provide this guarantee, buffer_migrate_folio_norefs()
may be more
appropriate.
Return
0 on success or a negative errno on failure.
-
int buffer_migrate_folio_norefs(struct address_space *mapping, struct folio *dst, struct folio *src, enum migrate_mode mode)¶
Migration function for folios with buffers.
Parameters
struct address_space *mapping
The address space containing src.
struct folio *dst
The folio to migrate to.
struct folio *src
The folio to migrate from.
enum migrate_mode mode
How to migrate the folio.
Description
Like buffer_migrate_folio()
except that this variant is more careful
and checks that there are also no buffer head references. This function
is the right one for mappings where buffer heads are directly looked
up and referenced (such as block device mappings).
Return
0 on success or a negative errno on failure.
-
unsigned long unmapped_area(struct vm_unmapped_area_info *info)¶
Find an area between the low_limit and the high_limit with the correct alignment and offset, all from info. Note: current->mm is used for the search.
Parameters
struct vm_unmapped_area_info *info
The unmapped area information including the range [low_limit - high_limit), the alignment offset and mask.
Return
A memory address or -ENOMEM.
-
unsigned long unmapped_area_topdown(struct vm_unmapped_area_info *info)¶
Find an area between the low_limit and the high_limit with the correct alignment and offset at the highest available address, all from info. Note: current->mm is used for the search.
Parameters
struct vm_unmapped_area_info *info
The unmapped area information including the range [low_limit - high_limit), the alignment offset and mask.
Return
A memory address or -ENOMEM.
-
struct vm_area_struct *find_vma_intersection(struct mm_struct *mm, unsigned long start_addr, unsigned long end_addr)¶
Look up the first VMA which intersects the interval
Parameters
struct mm_struct *mm
The process address space.
unsigned long start_addr
The inclusive start user address.
unsigned long end_addr
The exclusive end user address.
Return
The first VMA within the provided range, NULL
otherwise. Assumes
start_addr < end_addr.
-
struct vm_area_struct *find_vma(struct mm_struct *mm, unsigned long addr)¶
Find the VMA for a given address, or the next VMA.
Parameters
struct mm_struct *mm
The mm_struct to check
unsigned long addr
The address
Return
The VMA associated with addr, or the next VMA.
May return NULL
in the case of no VMA at addr or above.
-
struct vm_area_struct *find_vma_prev(struct mm_struct *mm, unsigned long addr, struct vm_area_struct **pprev)¶
Find the VMA for a given address, or the next vma and set
pprev
to the previous VMA, if any.
Parameters
struct mm_struct *mm
The mm_struct to check
unsigned long addr
The address
struct vm_area_struct **pprev
The pointer to set to the previous VMA
Description
Note that RCU lock is missing here since the external mmap_lock() is used instead.
Return
The VMA associated with addr, or the next vma.
May return NULL
in the case of no vma at addr or above.
-
void __ref kmemleak_alloc(const void *ptr, size_t size, int min_count, gfp_t gfp)¶
register a newly allocated object
Parameters
const void *ptr
pointer to beginning of the object
size_t size
size of the object
int min_count
minimum number of references to this object. If during memory scanning a number of references less than min_count is found, the object is reported as a memory leak. If min_count is 0, the object is never reported as a leak. If min_count is -1, the object is ignored (not scanned and not reported as a leak)
gfp_t gfp
kmalloc()
flags used for kmemleak internal memory allocations
Description
This function is called from the kernel allocators when a new object (memory block) is allocated (kmem_cache_alloc, kmalloc etc.).
-
void __ref kmemleak_alloc_percpu(const void __percpu *ptr, size_t size, gfp_t gfp)¶
register a newly allocated __percpu object
Parameters
const void __percpu *ptr
__percpu pointer to beginning of the object
size_t size
size of the object
gfp_t gfp
flags used for kmemleak internal memory allocations
Description
This function is called from the kernel percpu allocator when a new object (memory block) is allocated (alloc_percpu).
-
void __ref kmemleak_vmalloc(const struct vm_struct *area, size_t size, gfp_t gfp)¶
register a newly vmalloc'ed object
Parameters
const struct vm_struct *area
pointer to vm_struct
size_t size
size of the object
gfp_t gfp
__vmalloc() flags used for kmemleak internal memory allocations
Description
This function is called from the vmalloc()
kernel allocator when a new
object (memory block) is allocated.
-
void __ref kmemleak_free(const void *ptr)¶
unregister a previously registered object
Parameters
const void *ptr
pointer to beginning of the object
Description
This function is called from the kernel allocators when an object (memory block) is freed (kmem_cache_free, kfree, vfree etc.).
-
void __ref kmemleak_free_part(const void *ptr, size_t size)¶
partially unregister a previously registered object
Parameters
const void *ptr
pointer to the beginning or inside the object. This also represents the start of the range to be freed
size_t size
size to be unregistered
Description
This function is called when only a part of a memory block is freed (usually from the bootmem allocator).
-
void __ref kmemleak_free_percpu(const void __percpu *ptr)¶
unregister a previously registered __percpu object
Parameters
const void __percpu *ptr
__percpu pointer to beginning of the object
Description
This function is called from the kernel percpu allocator when an object (memory block) is freed (free_percpu).
-
void __ref kmemleak_update_trace(const void *ptr)¶
update object allocation stack trace
Parameters
const void *ptr
pointer to beginning of the object
Description
Override the object allocation stack trace for cases where the actual allocation place is not always useful.
-
void __ref kmemleak_not_leak(const void *ptr)¶
mark an allocated object as false positive
Parameters
const void *ptr
pointer to beginning of the object
Description
Calling this function on an object will cause the memory block to no longer be reported as leak and always be scanned.
-
void __ref kmemleak_ignore(const void *ptr)¶
ignore an allocated object
Parameters
const void *ptr
pointer to beginning of the object
Description
Calling this function on an object will cause the memory block to be ignored (not scanned and not reported as a leak). This is usually done when it is known that the corresponding block is not a leak and does not contain any references to other allocated memory blocks.
-
void __ref kmemleak_scan_area(const void *ptr, size_t size, gfp_t gfp)¶
limit the range to be scanned in an allocated object
Parameters
const void *ptr
pointer to beginning or inside the object. This also represents the start of the scan area
size_t size
size of the scan area
gfp_t gfp
kmalloc()
flags used for kmemleak internal memory allocations
Description
This function is used when it is known that only certain parts of an object contain references to other objects. Kmemleak will only scan these areas reducing the number false negatives.
-
void __ref kmemleak_no_scan(const void *ptr)¶
do not scan an allocated object
Parameters
const void *ptr
pointer to beginning of the object
Description
This function notifies kmemleak not to scan the given memory block. Useful in situations where it is known that the given object does not contain any references to other objects. Kmemleak will not scan such objects reducing the number of false negatives.
-
void __ref kmemleak_alloc_phys(phys_addr_t phys, size_t size, gfp_t gfp)¶
similar to kmemleak_alloc but taking a physical address argument
Parameters
phys_addr_t phys
physical address of the object
size_t size
size of the object
gfp_t gfp
kmalloc()
flags used for kmemleak internal memory allocations
-
void __ref kmemleak_free_part_phys(phys_addr_t phys, size_t size)¶
similar to kmemleak_free_part but taking a physical address argument
Parameters
phys_addr_t phys
physical address if the beginning or inside an object. This also represents the start of the range to be freed
size_t size
size to be unregistered
-
void __ref kmemleak_ignore_phys(phys_addr_t phys)¶
similar to kmemleak_ignore but taking a physical address argument
Parameters
phys_addr_t phys
physical address of the object
-
void *devm_memremap_pages(struct device *dev, struct dev_pagemap *pgmap)¶
remap and provide memmap backing for the given resource
Parameters
struct device *dev
hosting device for res
struct dev_pagemap *pgmap
pointer to a struct dev_pagemap
Notes
- 1/ At a minimum the range and type members of pgmap must be initialized
by the caller before passing it to this function
Description
- 2/ The altmap field may optionally be initialized, in which case
PGMAP_ALTMAP_VALID must be set in pgmap->flags.
- 3/ The ref field may optionally be provided, in which pgmap->ref must be
'live' on entry and will be killed and reaped at devm_memremap_pages_release() time, or if this routine fails.
- 4/ range is expected to be a host memory range that could feasibly be
treated as a "System RAM" range, i.e. not a device mmio range, but this is not enforced.
-
struct dev_pagemap *get_dev_pagemap(unsigned long pfn, struct dev_pagemap *pgmap)¶
take a new live reference on the dev_pagemap for pfn
Parameters
unsigned long pfn
page frame number to lookup page_map
struct dev_pagemap *pgmap
optional known pgmap that already has a reference
Description
If pgmap is non-NULL and covers pfn it will be returned as-is. If pgmap is non-NULL but does not cover pfn the reference to it will be released.
-
unsigned long vma_kernel_pagesize(struct vm_area_struct *vma)¶
Page size granularity for this VMA.
Parameters
struct vm_area_struct *vma
The user mapping.
Description
Folios in this VMA will be aligned to, and at least the size of the number of bytes returned by this function.
Return
The default size of the folios allocated when backing a VMA.
-
void put_pages_list(struct list_head *pages)¶
release a list of pages
Parameters
struct list_head *pages
list of pages threaded on page->lru
Description
Release a list of pages which are strung together on page.lru.
Parameters
struct folio *folio
The folio to be added to the LRU.
Description
Queue the folio for addition to the LRU. The decision on whether
to add the page to the [in]active [file|anon] list is deferred until the
folio_batch is drained. This gives a chance for the caller of folio_add_lru()
have the folio added to the active list using folio_mark_accessed().
-
void folio_add_lru_vma(struct folio *folio, struct vm_area_struct *vma)¶
Add a folio to the appropate LRU list for this VMA.
Parameters
struct folio *folio
The folio to be added to the LRU.
struct vm_area_struct *vma
VMA in which the folio is mapped.
Description
If the VMA is mlocked, folio is added to the unevictable list.
Otherwise, it is treated the same way as folio_add_lru()
.
Parameters
struct folio *folio
Folio to deactivate.
Description
This function hints to the VM that folio is a good reclaim candidate, for example if its invalidation fails due to the folio being dirty or under writeback.
Context
Caller holds a reference on the folio.
Parameters
struct folio *folio
folio to deactivate
Description
folio_mark_lazyfree()
moves folio to the inactive file list.
This is done to accelerate the reclaim of folio.
-
void release_pages(release_pages_arg arg, int nr)¶
batched put_page()
Parameters
release_pages_arg arg
array of pages to release
int nr
number of pages
Description
Decrement the reference count on all the pages in arg. If it fell to zero, remove the page from the LRU and free it.
Note that the argument can be an array of pages, encoded pages, or folio pointers. We ignore any encoded bits, and turn any of them into just a folio that gets free'd.
-
void folio_batch_remove_exceptionals(struct folio_batch *fbatch)¶
Prune non-folios from a batch.
Parameters
struct folio_batch *fbatch
The batch to prune
Description
find_get_entries() fills a batch with both folios and shadow/swap/DAX entries. This function prunes all the non-folio entries from fbatch without leaving holes, so that it can be passed on to folio-only batch operations.
-
void zpool_register_driver(struct zpool_driver *driver)¶
register a zpool implementation.
Parameters
struct zpool_driver *driver
driver to register
-
int zpool_unregister_driver(struct zpool_driver *driver)¶
unregister a zpool implementation.
Parameters
struct zpool_driver *driver
driver to unregister.
Description
Module usage counting is used to prevent using a driver while/after unloading, so if this is called from module exit function, this should never fail; if called from other than the module exit function, and this returns failure, the driver is in use and must remain available.
-
bool zpool_has_pool(char *type)¶
Check if the pool driver is available
Parameters
char *type
The type of the zpool to check (e.g. zbud, zsmalloc)
Description
This checks if the type pool driver is available. This will try to load
the requested module, if needed, but there is no guarantee the module will
still be loaded and available immediately after calling. If this returns
true, the caller should assume the pool is available, but must be prepared
to handle the zpool_create_pool()
returning failure. However if this
returns false, the caller should assume the requested pool type is not
available; either the requested pool type module does not exist, or could
not be loaded, and calling zpool_create_pool()
with the pool type will
fail.
The type string must be null-terminated.
Return
true if type pool is available, false if not
-
struct zpool *zpool_create_pool(const char *type, const char *name, gfp_t gfp)¶
Create a new zpool
Parameters
const char *type
The type of the zpool to create (e.g. zbud, zsmalloc)
const char *name
The name of the zpool (e.g. zram0, zswap)
gfp_t gfp
The GFP flags to use when allocating the pool.
Description
This creates a new zpool of the specified type. The gfp flags will be used when allocating memory, if the implementation supports it. If the ops param is NULL, then the created zpool will not be evictable.
Implementations must guarantee this to be thread-safe.
The type and name strings must be null-terminated.
Return
New zpool on success, NULL on failure.
Parameters
struct zpool *zpool
The zpool to destroy.
Description
Implementations must guarantee this to be thread-safe, however only when destroying different pools. The same pool should only be destroyed once, and should not be used after it is destroyed.
This destroys an existing zpool. The zpool should not be in use.
Parameters
struct zpool *zpool
The zpool to check
Description
This returns the type of the pool.
Implementations must guarantee this to be thread-safe.
Return
The type of zpool.
-
bool zpool_malloc_support_movable(struct zpool *zpool)¶
Check if the zpool supports allocating movable memory
Parameters
struct zpool *zpool
The zpool to check
Description
This returns if the zpool supports allocating movable memory.
Implementations must guarantee this to be thread-safe.
Return
true if the zpool supports allocating movable memory, false if not
-
int zpool_malloc(struct zpool *zpool, size_t size, gfp_t gfp, unsigned long *handle)¶
Allocate memory
Parameters
struct zpool *zpool
The zpool to allocate from.
size_t size
The amount of memory to allocate.
gfp_t gfp
The GFP flags to use when allocating memory.
unsigned long *handle
Pointer to the handle to set
Description
This allocates the requested amount of memory from the pool. The gfp flags will be used when allocating memory, if the implementation supports it. The provided handle will be set to the allocated object handle.
Implementations must guarantee this to be thread-safe.
Return
0 on success, negative value on error.
Parameters
struct zpool *zpool
The zpool that allocated the memory.
unsigned long handle
The handle to the memory to free.
Description
This frees previously allocated memory. This does not guarantee that the pool will actually free memory, only that the memory in the pool will become available for use by the pool.
Implementations must guarantee this to be thread-safe, however only when freeing different handles. The same handle should only be freed once, and should not be used after freeing.
-
void *zpool_map_handle(struct zpool *zpool, unsigned long handle, enum zpool_mapmode mapmode)¶
Map a previously allocated handle into memory
Parameters
struct zpool *zpool
The zpool that the handle was allocated from
unsigned long handle
The handle to map
enum zpool_mapmode mapmode
How the memory should be mapped
Description
This maps a previously allocated handle into memory. The mapmode param indicates to the implementation how the memory will be used, i.e. read-only, write-only, read-write. If the implementation does not support it, the memory will be treated as read-write.
This may hold locks, disable interrupts, and/or preemption,
and the zpool_unmap_handle()
must be called to undo those
actions. The code that uses the mapped handle should complete
its operations on the mapped handle memory quickly and unmap
as soon as possible. As the implementation may use per-cpu
data, multiple handles should not be mapped concurrently on
any cpu.
Return
A pointer to the handle's mapped memory area.
-
void zpool_unmap_handle(struct zpool *zpool, unsigned long handle)¶
Unmap a previously mapped handle
Parameters
struct zpool *zpool
The zpool that the handle was allocated from
unsigned long handle
The handle to unmap
Description
This unmaps a previously mapped handle. Any locks or other
actions that the implementation took in zpool_map_handle()
will be undone here. The memory area returned from
zpool_map_handle()
should no longer be used after this.
Parameters
struct zpool *zpool
The zpool to check
Description
This returns the total size in bytes of the pool.
Return
Total size of the zpool in bytes.
Parameters
struct zpool *zpool
The zpool to test
Description
Some allocators enter non-preemptible context in ->map() callback (e.g. disable pagefaults) and exit that context in ->unmap(), which limits what we can do with the mapped object. For instance, we cannot wait for asynchronous crypto API to decompress such an object or take mutexes since those will call into the scheduler. This function tells us whether we use such an allocator.
Return
true if zpool can sleep; false otherwise.
-
struct cgroup_subsys_state *mem_cgroup_css_from_folio(struct folio *folio)¶
css of the memcg associated with a folio
Parameters
struct folio *folio
folio of interest
Description
If memcg is bound to the default hierarchy, css of the memcg associated with folio is returned. The returned css remains associated with folio until it is released.
If memcg is bound to a traditional hierarchy, the css of root_mem_cgroup is returned.
Parameters
struct page *page
the page
Description
Look up the closest online ancestor of the memory cgroup page is charged to and return its inode number or 0 if page is not charged to any cgroup. It is safe to call this function without holding a reference to page.
Note, this function is inherently racy, because there is nothing to prevent
the cgroup inode from getting torn down and potentially reallocated a moment
after page_cgroup_ino()
returns, so it only should be used by callers that
do not care (such as procfs interfaces).
-
void __mod_memcg_state(struct mem_cgroup *memcg, int idx, int val)¶
update cgroup memory statistics
Parameters
struct mem_cgroup *memcg
the memory cgroup
int idx
the stat item - can be enum memcg_stat_item or enum node_stat_item
int val
delta to add to the counter, can be negative
-
void __mod_lruvec_state(struct lruvec *lruvec, enum node_stat_item idx, int val)¶
update lruvec memory statistics
Parameters
struct lruvec *lruvec
the lruvec
enum node_stat_item idx
the stat item
int val
delta to add to the counter, can be negative
Description
The lruvec is the intersection of the NUMA node and a cgroup. This function updates the all three counters that are affected by a change of state at this level: per-node, per-cgroup, per-lruvec.
-
void __count_memcg_events(struct mem_cgroup *memcg, enum vm_event_item idx, unsigned long count)¶
account VM events in a cgroup
Parameters
struct mem_cgroup *memcg
the memory cgroup
enum vm_event_item idx
the event item
unsigned long count
the number of events that occurred
-
struct mem_cgroup *get_mem_cgroup_from_mm(struct mm_struct *mm)¶
Obtain a reference on given mm_struct's memcg.
Parameters
struct mm_struct *mm
mm from which memcg should be extracted. It can be NULL.
Description
Obtain a reference on mm->memcg and returns it if successful. If mm is NULL, then the memcg is chosen as follows: 1) The active memcg, if set. 2) current->mm->memcg, if available 3) root memcg If mem_cgroup is disabled, NULL is returned.
-
struct mem_cgroup *get_mem_cgroup_from_current(void)¶
Obtain a reference on current task's memcg.
Parameters
void
no arguments
-
struct mem_cgroup *mem_cgroup_iter(struct mem_cgroup *root, struct mem_cgroup *prev, struct mem_cgroup_reclaim_cookie *reclaim)¶
iterate over memory cgroup hierarchy
Parameters
struct mem_cgroup *root
hierarchy root
struct mem_cgroup *prev
previously returned memcg, NULL on first invocation
struct mem_cgroup_reclaim_cookie *reclaim
cookie for shared reclaim walks, NULL for full walks
Description
Returns references to children of the hierarchy below root, or
root itself, or NULL
after a full round-trip.
Caller must pass the return value in prev on subsequent
invocations for reference counting, or use mem_cgroup_iter_break()
to cancel a hierarchy walk before the round-trip is complete.
Reclaimers can specify a node in reclaim to divide up the memcgs in the hierarchy among all concurrent reclaimers operating on the same node.
-
void mem_cgroup_iter_break(struct mem_cgroup *root, struct mem_cgroup *prev)¶
abort a hierarchy walk prematurely
Parameters
struct mem_cgroup *root
hierarchy root
struct mem_cgroup *prev
last visited hierarchy member as returned by
mem_cgroup_iter()
-
void mem_cgroup_scan_tasks(struct mem_cgroup *memcg, int (*fn)(struct task_struct*, void*), void *arg)¶
iterate over tasks of a memory cgroup hierarchy
Parameters
struct mem_cgroup *memcg
hierarchy root
int (*fn)(struct task_struct *, void *)
function to call for each task
void *arg
argument passed to fn
Description
This function iterates over tasks attached to memcg or to any of its descendants and calls fn for each task. If fn returns a non-zero value, the function breaks the iteration loop. Otherwise, it will iterate over all tasks and return 0.
This function must not be called for the root memory cgroup.
Parameters
struct folio *folio
Pointer to the folio.
Description
These functions are safe to use under any of the following conditions:
- folio locked
- folio_test_lru false
- folio_memcg_lock()
- folio frozen (refcount of 0)
Return
The lruvec this folio is on with its lock held.
Parameters
struct folio *folio
Pointer to the folio.
Description
These functions are safe to use under any of the following conditions:
- folio locked
- folio_test_lru false
- folio_memcg_lock()
- folio frozen (refcount of 0)
Return
The lruvec this folio is on with its lock held and interrupts disabled.
-
struct lruvec *folio_lruvec_lock_irqsave(struct folio *folio, unsigned long *flags)¶
Lock the lruvec for a folio.
Parameters
struct folio *folio
Pointer to the folio.
unsigned long *flags
Pointer to irqsave flags.
Description
These functions are safe to use under any of the following conditions:
- folio locked
- folio_test_lru false
- folio_memcg_lock()
- folio frozen (refcount of 0)
Return
The lruvec this folio is on with its lock held and interrupts disabled.
-
void mem_cgroup_update_lru_size(struct lruvec *lruvec, enum lru_list lru, int zid, int nr_pages)¶
account for adding or removing an lru page
Parameters
struct lruvec *lruvec
mem_cgroup per zone lru vector
enum lru_list lru
index of lru list the page is sitting on
int zid
zone id of the accounted pages
int nr_pages
positive when adding or negative when removing
Description
This function must be called under lru_lock, just before a page is added to or just after a page is removed from an lru list.
-
unsigned long mem_cgroup_margin(struct mem_cgroup *memcg)¶
calculate chargeable space of a memory cgroup
Parameters
struct mem_cgroup *memcg
the memory cgroup
Description
Returns the maximum amount of memory mem can be charged with, in pages.
-
void mem_cgroup_print_oom_context(struct mem_cgroup *memcg, struct task_struct *p)¶
Print OOM information relevant to memory controller.
Parameters
struct mem_cgroup *memcg
The memory cgroup that went over limit
struct task_struct *p
Task that is going to be killed
NOTE
memcg and p's mem_cgroup can be different when hierarchy is enabled
-
void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg)¶
Print OOM memory information relevant to memory controller.
Parameters
struct mem_cgroup *memcg
The memory cgroup that went over limit
-
bool mem_cgroup_oom_synchronize(bool handle)¶
complete memcg OOM handling
Parameters
bool handle
actually kill/wait or just clean up the OOM state
Description
This has to be called at the end of a page fault if the memcg OOM handler was enabled.
Memcg supports userspace OOM handling where failed allocations must
sleep on a waitqueue until the userspace task resolves the
situation. Sleeping directly in the charge context with all kinds
of locks held is not a good idea, instead we remember an OOM state
in the task and mem_cgroup_oom_synchronize()
has to be called at
the end of the page fault to complete the OOM handling.
Returns true
if an ongoing memcg OOM situation was detected and
completed, false
otherwise.
-
struct mem_cgroup *mem_cgroup_get_oom_group(struct task_struct *victim, struct mem_cgroup *oom_domain)¶
get a memory cgroup to clean up after OOM
Parameters
struct task_struct *victim
task to be killed by the OOM killer
struct mem_cgroup *oom_domain
memcg in case of memcg OOM, NULL in case of system-wide OOM
Description
Returns a pointer to a memory cgroup, which has to be cleaned up by killing all belonging OOM-killable tasks.
Caller has to call mem_cgroup_put() on the returned non-NULL memcg.
Parameters
struct folio *folio
The folio.
Description
This function prevents unlocked LRU folios from being moved to another cgroup.
It ensures lifetime of the bound memcg. The caller is responsible for the lifetime of the folio.
Parameters
struct folio *folio
The folio.
Description
This releases the binding created by folio_memcg_lock()
. This does
not change the accounting of this folio to its memcg, but it does
permit others to change it.
-
bool consume_stock(struct mem_cgroup *memcg, unsigned int nr_pages)¶
Try to consume stocked charge on this cpu.
Parameters
struct mem_cgroup *memcg
memcg to consume from.
unsigned int nr_pages
how many pages to charge.
Description
The charges will only happen if memcg matches the current cpu's memcg stock, and at least nr_pages are available in that stock. Failure to service an allocation will refill the stock.
returns true if successful, false otherwise.
-
void mem_cgroup_cancel_charge(struct mem_cgroup *memcg, unsigned int nr_pages)¶
cancel an uncommitted try_charge() call.
Parameters
struct mem_cgroup *memcg
memcg previously charged.
unsigned int nr_pages
number of pages previously charged.
-
void mem_cgroup_commit_charge(struct folio *folio, struct mem_cgroup *memcg)¶
commit a previously successful try_charge().
Parameters
struct folio *folio
folio to commit the charge to.
struct mem_cgroup *memcg
memcg previously charged.
-
int __memcg_kmem_charge_page(struct page *page, gfp_t gfp, int order)¶
charge a kmem page to the current memory cgroup
Parameters
struct page *page
page to charge
gfp_t gfp
reclaim mode
int order
allocation order
Description
Returns 0 on success, an error code on failure.
Parameters
struct page *page
page to uncharge
int order
allocation order
-
int mem_cgroup_move_swap_account(swp_entry_t entry, struct mem_cgroup *from, struct mem_cgroup *to)¶
move swap charge and swap_cgroup's record.
Parameters
swp_entry_t entry
swap entry to be moved
struct mem_cgroup *from
mem_cgroup which the entry is moved from
struct mem_cgroup *to
mem_cgroup which the entry is moved to
Description
It succeeds only when the swap_cgroup's record for this entry is the same as the mem_cgroup's id of from.
Returns 0 on success, -EINVAL on failure.
The caller must have charged to to, IOW, called page_counter_charge() about both res and memsw, and called css_get().
-
void mem_cgroup_wb_stats(struct bdi_writeback *wb, unsigned long *pfilepages, unsigned long *pheadroom, unsigned long *pdirty, unsigned long *pwriteback)¶
retrieve writeback related stats from its memcg
Parameters
struct bdi_writeback *wb
bdi_writeback in question
unsigned long *pfilepages
out parameter for number of file pages
unsigned long *pheadroom
out parameter for number of allocatable pages according to memcg
unsigned long *pdirty
out parameter for number of dirty pages
unsigned long *pwriteback
out parameter for number of pages under writeback
Description
Determine the numbers of file, headroom, dirty, and writeback pages in wb's memcg. File, dirty and writeback are self-explanatory. Headroom is a bit more involved.
A memcg's headroom is "min(max, high) - used". In the hierarchy, the headroom is calculated as the lowest headroom of itself and the ancestors. Note that this doesn't consider the actual amount of available memory in the system. The caller should further cap *pheadroom accordingly.
-
struct mem_cgroup *mem_cgroup_from_id(unsigned short id)¶
look up a memcg from a memcg id
-
void mem_cgroup_css_reset(struct cgroup_subsys_state *css)¶
reset the states of a mem_cgroup
Parameters
struct cgroup_subsys_state *css
the target css
Description
Reset the states of the mem_cgroup associated with css. This is invoked when the userland requests disabling on the default hierarchy but the memcg is pinned through dependency. The memcg should stop applying policies and should revert to the vanilla state as it may be made visible again.
The current implementation only resets the essential configurations. This needs to be expanded to cover all the visible parts.
-
int mem_cgroup_move_account(struct page *page, bool compound, struct mem_cgroup *from, struct mem_cgroup *to)¶
move account of the page
Parameters
struct page *page
the page
bool compound
charge the page as compound or small page
struct mem_cgroup *from
mem_cgroup which the page is moved from.
struct mem_cgroup *to
mem_cgroup which the page is moved to. from != to.
Description
The page must be locked and not on the LRU.
This function doesn't do "charge" to new cgroup and doesn't do "uncharge" from old cgroup.
-
enum mc_target_type get_mctgt_type(struct vm_area_struct *vma, unsigned long addr, pte_t ptent, union mc_target *target)¶
get target type of moving charge
Parameters
struct vm_area_struct *vma
the vma the pte to be checked belongs
unsigned long addr
the address corresponding to the pte to be checked
pte_t ptent
the pte to be checked
union mc_target *target
the pointer the target page or swap ent will be stored(can be NULL)
Context
Called with pte lock held.
Return
MC_TARGET_NONE - If the pte is not a target for move charge.
MC_TARGET_PAGE - If the page corresponding to this pte is a target for move charge. If target is not NULL, the page is stored in target->page with extra refcnt taken (Caller should release it).
MC_TARGET_SWAP - If the swap entry corresponding to this pte is a target for charge migration. If target is not NULL, the entry is stored in target->ent.
MC_TARGET_DEVICE - Like MC_TARGET_PAGE but page is device memory and thus not on the lru. For now such page is charged like a regular page would be as it is just special memory taking the place of a regular page. See Documentations/vm/hmm.txt and include/linux/hmm.h
-
void mem_cgroup_calculate_protection(struct mem_cgroup *root, struct mem_cgroup *memcg)¶
check if memory consumption is in the normal range
Parameters
struct mem_cgroup *root
the top ancestor of the sub-tree being checked
struct mem_cgroup *memcg
the memory cgroup to check
Description
- WARNING: This function is not stateless! It can only be used as part
of a top-down tree iteration, not for isolated queries.
-
int mem_cgroup_hugetlb_try_charge(struct mem_cgroup *memcg, gfp_t gfp, long nr_pages)¶
try to charge the memcg for a hugetlb folio
Parameters
struct mem_cgroup *memcg
memcg to charge.
gfp_t gfp
reclaim mode.
long nr_pages
number of pages to charge.
Description
This function is called when allocating a huge page folio to determine if the memcg has the capacity for it. It does not commit the charge yet, as the hugetlb folio itself has not been obtained from the hugetlb pool.
Once we have obtained the hugetlb folio, we can call
mem_cgroup_commit_charge()
to commit the charge. If we fail to obtain the
folio, we should instead call mem_cgroup_cancel_charge()
to undo the effect
of try_charge().
Returns 0 on success. Otherwise, an error code is returned.
-
int mem_cgroup_swapin_charge_folio(struct folio *folio, struct mm_struct *mm, gfp_t gfp, swp_entry_t entry)¶
Charge a newly allocated folio for swapin.
Parameters
struct folio *folio
folio to charge.
struct mm_struct *mm
mm context of the victim
gfp_t gfp
reclaim mode
swp_entry_t entry
swap entry for which the folio is allocated
Description
This function charges a folio allocated for swapin. Please call this before adding the folio to the swapcache.
Returns 0 on success. Otherwise, an error code is returned.
-
void __mem_cgroup_uncharge_list(struct list_head *page_list)¶
uncharge a list of page
Parameters
struct list_head *page_list
list of pages to uncharge
Description
Uncharge a list of pages previously charged with __mem_cgroup_charge().
Parameters
struct folio *old
Currently circulating folio.
struct folio *new
Replacement folio.
Description
Charge new as a replacement folio for old. old will
be uncharged upon free. This is only used by the page cache
(in replace_page_cache_folio()
).
Both folios must be locked, new->mapping must be set up.
-
void mem_cgroup_migrate(struct folio *old, struct folio *new)¶
Transfer the memcg data from the old to the new folio.
Parameters
struct folio *old
Currently circulating folio.
struct folio *new
Replacement folio.
Description
Transfer the memcg data from the old folio to the new folio for migration. The old folio's data info will be cleared. Note that the memory counters will remain unchanged throughout the process.
Both folios must be locked, new->mapping must be set up.
-
bool mem_cgroup_charge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages, gfp_t gfp_mask)¶
charge socket memory
Parameters
struct mem_cgroup *memcg
memcg to charge
unsigned int nr_pages
number of pages to charge
gfp_t gfp_mask
reclaim mode
Description
Charges nr_pages to memcg. Returns true
if the charge fit within
memcg's configured limit, false
if it doesn't.
-
void mem_cgroup_uncharge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages)¶
uncharge socket memory
Parameters
struct mem_cgroup *memcg
memcg to uncharge
unsigned int nr_pages
number of pages to uncharge
Parameters
struct folio *folio
folio whose memsw charge to transfer
swp_entry_t entry
swap entry to move the charge to
Description
Transfer the memsw charge of folio to entry.
-
int __mem_cgroup_try_charge_swap(struct folio *folio, swp_entry_t entry)¶
try charging swap space for a folio
Parameters
struct folio *folio
folio being added to swap
swp_entry_t entry
swap entry to charge
Description
Try to charge folio's memcg for the swap space at entry.
Returns 0 on success, -ENOMEM on failure.
-
void __mem_cgroup_uncharge_swap(swp_entry_t entry, unsigned int nr_pages)¶
uncharge swap space
Parameters
swp_entry_t entry
swap entry to uncharge
unsigned int nr_pages
the amount of swap space to uncharge
-
bool obj_cgroup_may_zswap(struct obj_cgroup *objcg)¶
check if this cgroup can zswap
Parameters
struct obj_cgroup *objcg
the object cgroup
Description
Check if the hierarchical zswap limit has been reached.
This doesn't check for specific headroom, and it is not atomic either. But with zswap, the size of the allocation is only known once compression has occurred, and this optimistic pre-check avoids spending cycles on compression when there is already no room left or zswap is disabled altogether somewhere in the hierarchy.
-
void obj_cgroup_charge_zswap(struct obj_cgroup *objcg, size_t size)¶
charge compression backend memory
Parameters
struct obj_cgroup *objcg
the object cgroup
size_t size
size of compressed object
Description
This forces the charge after obj_cgroup_may_zswap()
allowed
compression and storage in zwap for this cgroup to go ahead.
-
void obj_cgroup_uncharge_zswap(struct obj_cgroup *objcg, size_t size)¶
uncharge compression backend memory
Parameters
struct obj_cgroup *objcg
the object cgroup
size_t size
size of compressed object
Description
Uncharges zswap memory on page in.
-
void shmem_recalc_inode(struct inode *inode, long alloced, long swapped)¶
recalculate the block usage of an inode
Parameters
struct inode *inode
inode to recalc
long alloced
the change in number of pages allocated to inode
long swapped
the change in number of pages swapped from inode
Description
We have to calculate the free blocks since the mm can drop undirtied hole pages behind our back.
But normally info->alloced == inode->i_mapping->nrpages + info->swapped So mm freed is info->alloced - (inode->i_mapping->nrpages + info->swapped)
-
struct file *shmem_kernel_file_setup(const char *name, loff_t size, unsigned long flags)¶
get an unlinked file living in tmpfs which must be kernel internal. There will be NO LSM permission checks against the underlying inode. So users of this interface must do LSM checks at a higher layer. The users are the big_key and shm implementations. LSM checks are provided at the key or shm level rather than the inode.
Parameters
const char *name
name for dentry (to be seen in /proc/<pid>/maps
loff_t size
size to be set for the file
unsigned long flags
VM_NORESERVE suppresses pre-accounting of the entire object size
-
struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags)¶
get an unlinked file living in tmpfs
Parameters
const char *name
name for dentry (to be seen in /proc/<pid>/maps
loff_t size
size to be set for the file
unsigned long flags
VM_NORESERVE suppresses pre-accounting of the entire object size
-
struct file *shmem_file_setup_with_mnt(struct vfsmount *mnt, const char *name, loff_t size, unsigned long flags)¶
get an unlinked file living in tmpfs
Parameters
struct vfsmount *mnt
the tmpfs mount where the file will be created
const char *name
name for dentry (to be seen in /proc/<pid>/maps
loff_t size
size to be set for the file
unsigned long flags
VM_NORESERVE suppresses pre-accounting of the entire object size
-
int shmem_zero_setup(struct vm_area_struct *vma)¶
setup a shared anonymous mapping
Parameters
struct vm_area_struct *vma
the vma to be mmapped is prepared by do_mmap
-
struct folio *shmem_read_folio_gfp(struct address_space *mapping, pgoff_t index, gfp_t gfp)¶
read into page cache, using specified page allocation flags.
Parameters
struct address_space *mapping
the folio's address_space
pgoff_t index
the folio index
gfp_t gfp
the page allocator flags to use if allocating
Description
This behaves as a tmpfs "read_cache_page_gfp(mapping, index, gfp)",
with any new page allocations done using the specified allocation flags.
But read_cache_page_gfp()
uses the ->read_folio() method: which does not
suit tmpfs, since it may have pages in swapcache, and needs to find those
for itself; although drivers/gpu/drm i915 and ttm rely upon this support.
i915_gem_object_get_pages_gtt() mixes __GFP_NORETRY | __GFP_NOWARN in with the mapping_gfp_mask(), to avoid OOMing the machine unnecessarily.
-
int migrate_vma_setup(struct migrate_vma *args)¶
prepare to migrate a range of memory
Parameters
struct migrate_vma *args
contains the vma, start, and pfns arrays for the migration
Return
negative errno on failures, 0 when 0 or more pages were migrated without an error.
Description
Prepare to migrate a range of memory virtual address range by collecting all the pages backing each virtual address in the range, saving them inside the src array. Then lock those pages and unmap them. Once the pages are locked and unmapped, check whether each page is pinned or not. Pages that aren't pinned have the MIGRATE_PFN_MIGRATE flag set (by this function) in the corresponding src array entry. Then restores any pages that are pinned, by remapping and unlocking those pages.
The caller should then allocate destination memory and copy source memory to
it for all those entries (ie with MIGRATE_PFN_VALID and MIGRATE_PFN_MIGRATE
flag set). Once these are allocated and copied, the caller must update each
corresponding entry in the dst array with the pfn value of the destination
page and with MIGRATE_PFN_VALID. Destination pages must be locked via
lock_page()
.
Note that the caller does not have to migrate all the pages that are marked with MIGRATE_PFN_MIGRATE flag in src array unless this is a migration from device memory to system memory. If the caller cannot migrate a device page back to system memory, then it must return VM_FAULT_SIGBUS, which has severe consequences for the userspace process, so it must be avoided if at all possible.
For empty entries inside CPU page table (pte_none() or pmd_none() is true) we
do set MIGRATE_PFN_MIGRATE flag inside the corresponding source array thus
allowing the caller to allocate device memory for those unbacked virtual
addresses. For this the caller simply has to allocate device memory and
properly set the destination entry like for regular migration. Note that
this can still fail, and thus inside the device driver you must check if the
migration was successful for those entries after calling migrate_vma_pages()
,
just like for regular migration.
After that, the callers must call migrate_vma_pages()
to go over each entry
in the src array that has the MIGRATE_PFN_VALID and MIGRATE_PFN_MIGRATE flag
set. If the corresponding entry in dst array has MIGRATE_PFN_VALID flag set,
then migrate_vma_pages()
to migrate struct page information from the source
struct page to the destination struct page. If it fails to migrate the
struct page information, then it clears the MIGRATE_PFN_MIGRATE flag in the
src array.
At this point all successfully migrated pages have an entry in the src array with MIGRATE_PFN_VALID and MIGRATE_PFN_MIGRATE flag set and the dst array entry with MIGRATE_PFN_VALID flag set.
Once migrate_vma_pages()
returns the caller may inspect which pages were
successfully migrated, and which were not. Successfully migrated pages will
have the MIGRATE_PFN_MIGRATE flag set for their src array entry.
It is safe to update device page table after migrate_vma_pages()
because
both destination and source page are still locked, and the mmap_lock is held
in read mode (hence no one can unmap the range being migrated).
Once the caller is done cleaning up things and updating its page table (if it
chose to do so, this is not an obligation) it finally calls
migrate_vma_finalize()
to update the CPU page table to point to new pages
for successfully migrated pages or otherwise restore the CPU page table to
point to the original source pages.
-
void migrate_device_pages(unsigned long *src_pfns, unsigned long *dst_pfns, unsigned long npages)¶
migrate meta-data from src page to dst page
Parameters
unsigned long *src_pfns
src_pfns returned from
migrate_device_range()
unsigned long *dst_pfns
array of pfns allocated by the driver to migrate memory to
unsigned long npages
number of pages in the range
Description
Equivalent to migrate_vma_pages()
. This is called to migrate struct page
meta-data from source struct page to destination.
-
void migrate_vma_pages(struct migrate_vma *migrate)¶
migrate meta-data from src page to dst page
Parameters
struct migrate_vma *migrate
migrate struct containing all migration information
Description
This migrates struct page meta-data from source struct page to destination struct page. This effectively finishes the migration from source page to the destination page.
-
void migrate_vma_finalize(struct migrate_vma *migrate)¶
restore CPU page table entry
Parameters
struct migrate_vma *migrate
migrate struct containing all migration information
Description
This replaces the special migration pte entry with either a mapping to the new page if migration was successful for that page, or to the original page otherwise.
This also unlocks the pages and puts them back on the lru, or drops the extra refcount, for device pages.
-
int migrate_device_range(unsigned long *src_pfns, unsigned long start, unsigned long npages)¶
migrate device private pfns to normal memory.
Parameters
unsigned long *src_pfns
array large enough to hold migrating source device private pfns.
unsigned long start
starting pfn in the range to migrate.
unsigned long npages
number of pages to migrate.
Description
migrate_vma_setup()
is similar in concept to migrate_vma_setup()
except that
instead of looking up pages based on virtual address mappings a range of
device pfns that should be migrated to system memory is used instead.
This is useful when a driver needs to free device memory but doesn't know the virtual mappings of every page that may be in device memory. For example this is often the case when a driver is being unloaded or unbound from a device.
Like migrate_vma_setup()
this function will take a reference and lock any
migrating pages that aren't free before unmapping them. Drivers may then
allocate destination pages and start copying data from the device to CPU
memory before calling migrate_device_pages()
.
-
struct wp_walk¶
Private struct for pagetable walk callbacks
Definition:
struct wp_walk {
struct mmu_notifier_range range;
unsigned long tlbflush_start;
unsigned long tlbflush_end;
unsigned long total;
};
Members
range
Range for mmu notifiers
tlbflush_start
Address of first modified pte
tlbflush_end
Address of last modified pte + 1
total
Total number of modified ptes
-
int wp_pte(pte_t *pte, unsigned long addr, unsigned long end, struct mm_walk *walk)¶
Write-protect a pte
Parameters
pte_t *pte
Pointer to the pte
unsigned long addr
The start of protecting virtual address
unsigned long end
The end of protecting virtual address
struct mm_walk *walk
pagetable walk callback argument
Description
The function write-protects a pte and records the range in virtual address space of touched ptes for efficient range TLB flushes.
-
struct clean_walk¶
Private struct for the clean_record_pte function.
Definition:
struct clean_walk {
struct wp_walk base;
pgoff_t bitmap_pgoff;
unsigned long *bitmap;
pgoff_t start;
pgoff_t end;
};
Members
base
struct wp_walk
we derive frombitmap_pgoff
Address_space Page offset of the first bit in bitmap
bitmap
Bitmap with one bit for each page offset in the address_space range covered.
start
Address_space page offset of first modified pte relative to bitmap_pgoff
end
Address_space page offset of last modified pte relative to bitmap_pgoff
-
int clean_record_pte(pte_t *pte, unsigned long addr, unsigned long end, struct mm_walk *walk)¶
Clean a pte and record its address space offset in a bitmap
Parameters
pte_t *pte
Pointer to the pte
unsigned long addr
The start of virtual address to be clean
unsigned long end
The end of virtual address to be clean
struct mm_walk *walk
pagetable walk callback argument
Description
The function cleans a pte and records the range in virtual address space of touched ptes for efficient TLB flushes. It also records dirty ptes in a bitmap representing page offsets in the address_space, as well as the first and last of the bits touched.
Write-protect all ptes in an address space range
Parameters
struct address_space *mapping
The address_space we want to write protect
pgoff_t first_index
The first page offset in the range
pgoff_t nr
Number of incremental page offsets to cover
Note
This function currently skips transhuge page-table entries, since it's intended for dirty-tracking on the PTE level. It will warn on encountering transhuge write-enabled entries, though, and can easily be extended to handle them as well.
Return
The number of ptes actually write-protected. Note that already write-protected ptes are not counted.
Clean and record all ptes in an address space range
Parameters
struct address_space *mapping
The address_space we want to clean
pgoff_t first_index
The first page offset in the range
pgoff_t nr
Number of incremental page offsets to cover
pgoff_t bitmap_pgoff
The page offset of the first bit in bitmap
unsigned long *bitmap
Pointer to a bitmap of at least nr bits. The bitmap needs to cover the whole range first_index..**first_index** + nr.
pgoff_t *start
Pointer to number of the first set bit in bitmap. is modified as new bits are set by the function.
pgoff_t *end
Pointer to the number of the last set bit in bitmap. none set. The value is modified as new bits are set by the function.
Description
When this function returns there is no guarantee that a CPU has not already dirtied new ptes. However it will not clean any ptes not reported in the bitmap. The guarantees are as follows:
All ptes dirty when the function starts executing will end up recorded in the bitmap.
All ptes dirtied after that will either remain dirty, be recorded in the bitmap or both.
If a caller needs to make sure all dirty ptes are picked up and none additional are added, it first needs to write-protect the address-space range and make sure new writers are blocked in page_mkwrite() or pfn_mkwrite(). And then after a TLB flush following the write-protection pick up all dirty bits.
This function currently skips transhuge page-table entries, since it's intended for dirty-tracking on the PTE level. It will warn on encountering transhuge dirty entries, though, and can easily be extended to handle them as well.
Return
The number of dirty ptes actually cleaned.
-
bool pcpu_addr_in_chunk(struct pcpu_chunk *chunk, void *addr)¶
check if the address is served from this chunk
Parameters
struct pcpu_chunk *chunk
chunk of interest
void *addr
percpu address
Return
True if the address is served from this chunk.
-
bool pcpu_check_block_hint(struct pcpu_block_md *block, int bits, size_t align)¶
check against the contig hint
Parameters
struct pcpu_block_md *block
block of interest
int bits
size of allocation
size_t align
alignment of area (max PAGE_SIZE)
Description
Check to see if the allocation can fit in the block's contig hint. Note, a chunk uses the same hints as a block so this can also check against the chunk's contig hint.
-
void pcpu_next_md_free_region(struct pcpu_chunk *chunk, int *bit_off, int *bits)¶
finds the next hint free area
Parameters
struct pcpu_chunk *chunk
chunk of interest
int *bit_off
chunk offset
int *bits
size of free area
Description
Helper function for pcpu_for_each_md_free_region. It checks block->contig_hint and performs aggregation across blocks to find the next hint. It modifies bit_off and bits in-place to be consumed in the loop.
-
void pcpu_next_fit_region(struct pcpu_chunk *chunk, int alloc_bits, int align, int *bit_off, int *bits)¶
finds fit areas for a given allocation request
Parameters
struct pcpu_chunk *chunk
chunk of interest
int alloc_bits
size of allocation
int align
alignment of area (max PAGE_SIZE)
int *bit_off
chunk offset
int *bits
size of free area
Description
Finds the next free region that is viable for use with a given size and alignment. This only returns if there is a valid area to be used for this allocation. block->first_free is returned if the allocation request fits within the block to see if the request can be fulfilled prior to the contig hint.
-
void *pcpu_mem_zalloc(size_t size, gfp_t gfp)¶
allocate memory
Parameters
size_t size
bytes to allocate
gfp_t gfp
allocation flags
Description
Allocate size bytes. If size is smaller than PAGE_SIZE,
kzalloc()
is used; otherwise, the equivalent of vzalloc()
is used.
This is to facilitate passing through whitelisted flags. The
returned memory is always zeroed.
Return
Pointer to the allocated area on success, NULL on failure.
-
void pcpu_mem_free(void *ptr)¶
free memory
Parameters
void *ptr
memory to free
Description
Free ptr. ptr should have been allocated using pcpu_mem_zalloc()
.
-
void pcpu_chunk_relocate(struct pcpu_chunk *chunk, int oslot)¶
put chunk in the appropriate chunk slot
Parameters
struct pcpu_chunk *chunk
chunk of interest
int oslot
the previous slot it was on
Description
This function is called after an allocation or free changed chunk. New slot according to the changed state is determined and chunk is moved to the slot. Note that the reserved chunk is never put on chunk slots.
Context
pcpu_lock.
-
void pcpu_block_update(struct pcpu_block_md *block, int start, int end)¶
updates a block given a free area
Parameters
struct pcpu_block_md *block
block of interest
int start
start offset in block
int end
end offset in block
Description
Updates a block given a known free area. The region [start, end) is expected to be the entirety of the free area within a block. Chooses the best starting offset if the contig hints are equal.
-
void pcpu_chunk_refresh_hint(struct pcpu_chunk *chunk, bool full_scan)¶
updates metadata about a chunk
Parameters
struct pcpu_chunk *chunk
chunk of interest
bool full_scan
if we should scan from the beginning
Description
Iterates over the metadata blocks to find the largest contig area. A full scan can be avoided on the allocation path as this is triggered if we broke the contig_hint. In doing so, the scan_hint will be before the contig_hint or after if the scan_hint == contig_hint. This cannot be prevented on freeing as we want to find the largest area possibly spanning blocks.
-
void pcpu_block_refresh_hint(struct pcpu_chunk *chunk, int index)¶
Parameters
struct pcpu_chunk *chunk
chunk of interest
int index
index of the metadata block
Description
Scans over the block beginning at first_free and updates the block metadata accordingly.
-
void pcpu_block_update_hint_alloc(struct pcpu_chunk *chunk, int bit_off, int bits)¶
update hint on allocation path
Parameters
struct pcpu_chunk *chunk
chunk of interest
int bit_off
chunk offset
int bits
size of request
Description
Updates metadata for the allocation path. The metadata only has to be refreshed by a full scan iff the chunk's contig hint is broken. Block level scans are required if the block's contig hint is broken.
-
void pcpu_block_update_hint_free(struct pcpu_chunk *chunk, int bit_off, int bits)¶
updates the block hints on the free path
Parameters
struct pcpu_chunk *chunk
chunk of interest
int bit_off
chunk offset
int bits
size of request
Description
Updates metadata for the allocation path. This avoids a blind block refresh by making use of the block contig hints. If this fails, it scans forward and backward to determine the extent of the free area. This is capped at the boundary of blocks.
A chunk update is triggered if a page becomes free, a block becomes free, or the free spans across blocks. This tradeoff is to minimize iterating over the block metadata to update chunk_md->contig_hint. chunk_md->contig_hint may be off by up to a page, but it will never be more than the available space. If the contig hint is contained in one block, it will be accurate.
-
bool pcpu_is_populated(struct pcpu_chunk *chunk, int bit_off, int bits, int *next_off)¶
determines if the region is populated
Parameters
struct pcpu_chunk *chunk
chunk of interest
int bit_off
chunk offset
int bits
size of area
int *next_off
return value for the next offset to start searching
Description
For atomic allocations, check if the backing pages are populated.
Return
Bool if the backing pages are populated. next_index is to skip over unpopulated blocks in pcpu_find_block_fit.
-
int pcpu_find_block_fit(struct pcpu_chunk *chunk, int alloc_bits, size_t align, bool pop_only)¶
finds the block index to start searching
Parameters
struct pcpu_chunk *chunk
chunk of interest
int alloc_bits
size of request in allocation units
size_t align
alignment of area (max PAGE_SIZE bytes)
bool pop_only
use populated regions only
Description
Given a chunk and an allocation spec, find the offset to begin searching for a free region. This iterates over the bitmap metadata blocks to find an offset that will be guaranteed to fit the requirements. It is not quite first fit as if the allocation does not fit in the contig hint of a block or chunk, it is skipped. This errs on the side of caution to prevent excess iteration. Poor alignment can cause the allocator to skip over blocks and chunks that have valid free areas.
Return
The offset in the bitmap to begin searching. -1 if no offset is found.
-
int pcpu_alloc_area(struct pcpu_chunk *chunk, int alloc_bits, size_t align, int start)¶
allocates an area from a pcpu_chunk
Parameters
struct pcpu_chunk *chunk
chunk of interest
int alloc_bits
size of request in allocation units
size_t align
alignment of area (max PAGE_SIZE)
int start
bit_off to start searching
Description
This function takes in a start offset to begin searching to fit an allocation of alloc_bits with alignment align. It needs to scan the allocation map because if it fits within the block's contig hint, start will be block->first_free. This is an attempt to fill the allocation prior to breaking the contig hint. The allocation and boundary maps are updated accordingly if it confirms a valid free area.
Return
Allocated addr offset in chunk on success. -1 if no matching area is found.
-
int pcpu_free_area(struct pcpu_chunk *chunk, int off)¶
frees the corresponding offset
Parameters
struct pcpu_chunk *chunk
chunk of interest
int off
addr offset into chunk
Description
This function determines the size of an allocation to free using the boundary bitmap and clears the allocation map.
Return
Number of freed bytes.
-
struct pcpu_chunk *pcpu_alloc_first_chunk(unsigned long tmp_addr, int map_size)¶
creates chunks that serve the first chunk
Parameters
unsigned long tmp_addr
the start of the region served
int map_size
size of the region served
Description
This is responsible for creating the chunks that serve the first chunk. The base_addr is page aligned down of tmp_addr while the region end is page aligned up. Offsets are kept track of to determine the region served. All this is done to appease the bitmap allocator in avoiding partial blocks.
Return
Chunk serving the region at tmp_addr of map_size.
-
void pcpu_chunk_populated(struct pcpu_chunk *chunk, int page_start, int page_end)¶
post-population bookkeeping
Parameters
struct pcpu_chunk *chunk
pcpu_chunk which got populated
int page_start
the start page
int page_end
the end page
Description
Pages in [page_start,**page_end**) have been populated to chunk. Update the bookkeeping information accordingly. Must be called after each successful population.
-
void pcpu_chunk_depopulated(struct pcpu_chunk *chunk, int page_start, int page_end)¶
post-depopulation bookkeeping
Parameters
struct pcpu_chunk *chunk
pcpu_chunk which got depopulated
int page_start
the start page
int page_end
the end page
Description
Pages in [page_start,**page_end**) have been depopulated from chunk. Update the bookkeeping information accordingly. Must be called after each successful depopulation.
-
struct pcpu_chunk *pcpu_chunk_addr_search(void *addr)¶
determine chunk containing specified address
Parameters
void *addr
address for which the chunk needs to be determined.
Description
This is an internal function that handles all but static allocations. Static percpu address values should never be passed into the allocator.
Return
The address of the found chunk.
-
void __percpu *pcpu_alloc(size_t size, size_t align, bool reserved, gfp_t gfp)¶
the percpu allocator
Parameters
size_t size
size of area to allocate in bytes
size_t align
alignment of area (max PAGE_SIZE)
bool reserved
allocate from the reserved chunk if available
gfp_t gfp
allocation flags
Description
Allocate percpu area of size bytes aligned at align. If gfp doesn't
contain GFP_KERNEL
, the allocation is atomic. If gfp has __GFP_NOWARN
then no warning will be triggered on invalid or failed allocation
requests.
Return
Percpu pointer to the allocated area on success, NULL on failure.
-
void __percpu *__alloc_percpu_gfp(size_t size, size_t align, gfp_t gfp)¶
allocate dynamic percpu area
Parameters
size_t size
size of area to allocate in bytes
size_t align
alignment of area (max PAGE_SIZE)
gfp_t gfp
allocation flags
Description
Allocate zero-filled percpu area of size bytes aligned at align. If
gfp doesn't contain GFP_KERNEL
, the allocation doesn't block and can
be called from any context but is a lot more likely to fail. If gfp
has __GFP_NOWARN then no warning will be triggered on invalid or failed
allocation requests.
Return
Percpu pointer to the allocated area on success, NULL on failure.
-
void __percpu *__alloc_percpu(size_t size, size_t align)¶
allocate dynamic percpu area
Parameters
size_t size
size of area to allocate in bytes
size_t align
alignment of area (max PAGE_SIZE)
Description
Equivalent to __alloc_percpu_gfp(size, align, GFP_KERNEL
).
-
void __percpu *__alloc_reserved_percpu(size_t size, size_t align)¶
allocate reserved percpu area
Parameters
size_t size
size of area to allocate in bytes
size_t align
alignment of area (max PAGE_SIZE)
Description
Allocate zero-filled percpu area of size bytes aligned at align from reserved percpu area if arch has set it up; otherwise, allocation is served from the same dynamic area. Might sleep. Might trigger writeouts.
Context
Does GFP_KERNEL allocation.
Return
Percpu pointer to the allocated area on success, NULL on failure.
-
void pcpu_balance_free(bool empty_only)¶
manage the amount of free chunks
Parameters
bool empty_only
free chunks only if there are no populated pages
Description
If empty_only is false
, reclaim all fully free chunks regardless of the
number of populated pages. Otherwise, only reclaim chunks that have no
populated pages.
Context
pcpu_lock (can be dropped temporarily)
-
void pcpu_balance_populated(void)¶
manage the amount of populated pages
Parameters
void
no arguments
Description
Maintain a certain amount of populated pages to satisfy atomic allocations. It is possible that this is called when physical memory is scarce causing OOM killer to be triggered. We should avoid doing so until an actual allocation causes the failure as it is possible that requests can be serviced from already backed regions.
Context
pcpu_lock (can be dropped temporarily)
-
void pcpu_reclaim_populated(void)¶
scan over to_depopulate chunks and free empty pages
Parameters
void
no arguments
Description
Scan over chunks in the depopulate list and try to release unused populated pages back to the system. Depopulated chunks are sidelined to prevent repopulating these pages unless required. Fully free chunks are reintegrated and freed accordingly (1 is kept around). If we drop below the empty populated pages threshold, reintegrate the chunk if it has empty free pages. Each chunk is scanned in the reverse order to keep populated pages close to the beginning of the chunk.
Context
pcpu_lock (can be dropped temporarily)
-
void pcpu_balance_workfn(struct work_struct *work)¶
manage the amount of free chunks and populated pages
Parameters
struct work_struct *work
unused
Description
For each chunk type, manage the number of fully free chunks and the number of populated pages. An important thing to consider is when pages are freed and how they contribute to the global counts.
-
size_t pcpu_alloc_size(void __percpu *ptr)¶
the size of the dynamic percpu area
Parameters
void __percpu *ptr
pointer to the dynamic percpu area
Description
Returns the size of the ptr allocation. This is undefined for statically defined percpu variables as there is no corresponding chunk->bound_map.
Return
The size of the dynamic percpu area.
Context
Can be called from atomic context.
-
void free_percpu(void __percpu *ptr)¶
free percpu area
Parameters
void __percpu *ptr
pointer to area to free
Description
Free percpu area ptr.
Context
Can be called from atomic context.
-
bool is_kernel_percpu_address(unsigned long addr)¶
test whether address is from static percpu area
Parameters
unsigned long addr
address to test
Description
Test whether addr belongs to in-kernel static percpu area. Module static percpu areas are not considered. For those, use is_module_percpu_address().
Return
true
if addr is from in-kernel static percpu area, false
otherwise.
-
phys_addr_t per_cpu_ptr_to_phys(void *addr)¶
convert translated percpu address to physical address
Parameters
void *addr
the address to be converted to physical address
Description
Given addr which is dereferenceable address obtained via one of percpu access macros, this function translates it into its physical address. The caller is responsible for ensuring addr stays valid until this function finishes.
percpu allocator has special setup for the first chunk, which currently supports either embedding in linear address space or vmalloc mapping, and, from the second one, the backing allocator (currently either vm or km) provides translation.
The addr can be translated simply without checking if it falls into the
first chunk. But the current code reflects better how percpu allocator
actually works, and the verification can discover both bugs in percpu
allocator itself and per_cpu_ptr_to_phys()
callers. So we keep current
code.
Return
The physical address for addr.
-
struct pcpu_alloc_info *pcpu_alloc_alloc_info(int nr_groups, int nr_units)¶
allocate percpu allocation info
Parameters
int nr_groups
the number of groups
int nr_units
the number of units
Description
Allocate ai which is large enough for nr_groups groups containing nr_units units. The returned ai's groups[0].cpu_map points to the cpu_map array which is long enough for nr_units and filled with NR_CPUS. It's the caller's responsibility to initialize cpu_map pointer of other groups.
Return
Pointer to the allocated pcpu_alloc_info on success, NULL on failure.
-
void pcpu_free_alloc_info(struct pcpu_alloc_info *ai)¶
free percpu allocation info
Parameters
struct pcpu_alloc_info *ai
pcpu_alloc_info to free
Description
Free ai which was allocated by pcpu_alloc_alloc_info()
.
-
void pcpu_dump_alloc_info(const char *lvl, const struct pcpu_alloc_info *ai)¶
print out information about pcpu_alloc_info
Parameters
const char *lvl
loglevel
const struct pcpu_alloc_info *ai
allocation info to dump
Description
Print out information about ai using loglevel lvl.
-
void pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, void *base_addr)¶
initialize the first percpu chunk
Parameters
const struct pcpu_alloc_info *ai
pcpu_alloc_info describing how to percpu area is shaped
void *base_addr
mapped address
Description
Initialize the first percpu chunk which contains the kernel static percpu area. This function is to be called from arch percpu area setup path.
ai contains all information necessary to initialize the first chunk and prime the dynamic percpu allocator.
ai->static_size is the size of static percpu area.
ai->reserved_size, if non-zero, specifies the amount of bytes to reserve after the static area in the first chunk. This reserves the first chunk such that it's available only through reserved percpu allocation. This is primarily used to serve module percpu static areas on architectures where the addressing model has limited offset range for symbol relocations to guarantee module percpu symbols fall inside the relocatable range.
ai->dyn_size determines the number of bytes available for dynamic allocation in the first chunk. The area between ai->static_size + ai->reserved_size + ai->dyn_size and ai->unit_size is unused.
ai->unit_size specifies unit size and must be aligned to PAGE_SIZE and equal to or larger than ai->static_size + ai->reserved_size + ai->dyn_size.
ai->atom_size is the allocation atom size and used as alignment for vm areas.
ai->alloc_size is the allocation size and always multiple of ai->atom_size. This is larger than ai->atom_size if ai->unit_size is larger than ai->atom_size.
ai->nr_groups and ai->groups describe virtual memory layout of percpu areas. Units which should be colocated are put into the same group. Dynamic VM areas will be allocated according to these groupings. If ai->nr_groups is zero, a single group containing all units is assumed.
The caller should have mapped the first chunk at base_addr and copied static data to each unit.
The first chunk will always contain a static and a dynamic region. However, the static region is not managed by any chunk. If the first chunk also contains a reserved region, it is served by two chunks - one for the reserved region and one for the dynamic region. They share the same vm, but use offset regions in the area allocation map. The chunk serving the dynamic region is circulated in the chunk slots and available for dynamic allocation like any other chunk.
-
struct pcpu_alloc_info *pcpu_build_alloc_info(size_t reserved_size, size_t dyn_size, size_t atom_size, pcpu_fc_cpu_distance_fn_t cpu_distance_fn)¶
build alloc_info considering distances between CPUs
Parameters
size_t reserved_size
the size of reserved percpu area in bytes
size_t dyn_size
minimum free size for dynamic allocation in bytes
size_t atom_size
allocation atom size
pcpu_fc_cpu_distance_fn_t cpu_distance_fn
callback to determine distance between cpus, optional
Description
This function determines grouping of units, their mappings to cpus and other parameters considering needed percpu size, allocation atom size and distances between CPUs.
Groups are always multiples of atom size and CPUs which are of LOCAL_DISTANCE both ways are grouped together and share space for units in the same group. The returned configuration is guaranteed to have CPUs on different nodes on different groups and >=75% usage of allocated virtual address space.
Return
On success, pointer to the new allocation_info is returned. On failure, ERR_PTR value is returned.
-
int pcpu_embed_first_chunk(size_t reserved_size, size_t dyn_size, size_t atom_size, pcpu_fc_cpu_distance_fn_t cpu_distance_fn, pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn)¶
embed the first percpu chunk into bootmem
Parameters
size_t reserved_size
the size of reserved percpu area in bytes
size_t dyn_size
minimum free size for dynamic allocation in bytes
size_t atom_size
allocation atom size
pcpu_fc_cpu_distance_fn_t cpu_distance_fn
callback to determine distance between cpus, optional
pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn
callback to convert cpu to it's node, optional
Description
This is a helper to ease setting up embedded first percpu chunk and
can be called where pcpu_setup_first_chunk()
is expected.
If this function is used to setup the first chunk, it is allocated by calling pcpu_fc_alloc and used as-is without being mapped into vmalloc area. Allocations are always whole multiples of atom_size aligned to atom_size.
This enables the first chunk to piggy back on the linear physical mapping which often uses larger page size. Please note that this can result in very sparse cpu->unit mapping on NUMA machines thus requiring large vmalloc address space. Don't use this allocator if vmalloc space is not orders of magnitude larger than distances between node memory addresses (ie. 32bit NUMA machines).
dyn_size specifies the minimum dynamic area size.
If the needed size is smaller than the minimum or specified unit size, the leftover is returned using pcpu_fc_free.
Return
0 on success, -errno on failure.
-
int pcpu_page_first_chunk(size_t reserved_size, pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn)¶
map the first chunk using PAGE_SIZE pages
Parameters
size_t reserved_size
the size of reserved percpu area in bytes
pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn
callback to convert cpu to it's node, optional
Description
This is a helper to ease setting up page-remapped first percpu
chunk and can be called where pcpu_setup_first_chunk()
is expected.
This is the basic allocator. Static percpu area is allocated page-by-page into vmalloc area.
Return
0 on success, -errno on failure.
-
long copy_from_user_nofault(void *dst, const void __user *src, size_t size)¶
safely attempt to read from a user-space location
Parameters
void *dst
pointer to the buffer that shall take the data
const void __user *src
address to read from. This must be a user address.
size_t size
size of the data chunk
Description
Safely read from user address src to the buffer at dst. If a kernel fault happens, handle that and return -EFAULT.
-
long copy_to_user_nofault(void __user *dst, const void *src, size_t size)¶
safely attempt to write to a user-space location
Parameters
void __user *dst
address to write to
const void *src
pointer to the data that shall be written
size_t size
size of the data chunk
Description
Safely write to address dst from the buffer at src. If a kernel fault happens, handle that and return -EFAULT.
-
long strncpy_from_user_nofault(char *dst, const void __user *unsafe_addr, long count)¶
Copy a NUL terminated string from unsafe user address.
Parameters
char *dst
Destination address, in kernel space. This buffer must be at least count bytes long.
const void __user *unsafe_addr
Unsafe user address.
long count
Maximum number of bytes to copy, including the trailing NUL.
Description
Copies a NUL-terminated string from unsafe user address to kernel buffer.
On success, returns the length of the string INCLUDING the trailing NUL.
If access fails, returns -EFAULT (some data may have been copied and the trailing NUL added).
If count is smaller than the length of the string, copies count-1 bytes, sets the last byte of dst buffer to NUL and returns count.
-
long strnlen_user_nofault(const void __user *unsafe_addr, long count)¶
Get the size of a user string INCLUDING final NUL.
Parameters
const void __user *unsafe_addr
The string to measure.
long count
Maximum count (including NUL)
Description
Get the size of a NUL-terminated string in user space without pagefault.
Returns the size of the string INCLUDING the terminating NUL.
If the string is too long, returns a number larger than count. User has to check the return value against "> count". On exception (or invalid count), returns 0.
Unlike strnlen_user, this can be used from IRQ handler etc. because it disables pagefaults.
-
bool writeback_throttling_sane(struct scan_control *sc)¶
is the usual dirty throttling mechanism available?
Parameters
struct scan_control *sc
scan_control in question
Description
The normal page dirty throttling mechanism in balance_dirty_pages() is completely broken with the legacy memcg and direct stalling in shrink_folio_list() is used for throttling instead, which lacks all the niceties such as fairness, adaptive pausing, bandwidth proportional allocation and configurability.
This function tests whether the vmscan currently in progress can assume that the normal dirty throttling mechanism is operational.
-
unsigned long lruvec_lru_size(struct lruvec *lruvec, enum lru_list lru, int zone_idx)¶
Returns the number of pages on the given LRU list.
Parameters
struct lruvec *lruvec
lru vector
enum lru_list lru
lru to use
int zone_idx
zones to consider (use MAX_NR_ZONES - 1 for the whole LRU list)
-
long remove_mapping(struct address_space *mapping, struct folio *folio)¶
Attempt to remove a folio from its mapping.
Parameters
struct address_space *mapping
The address space.
struct folio *folio
The folio to remove.
Description
If the folio is dirty, under writeback or if someone else has a ref on it, removal will fail.
Return
The number of pages removed from the mapping. 0 if the folio could not be removed.
Context
The caller should have a single refcount on the folio and hold its lock.
-
void folio_putback_lru(struct folio *folio)¶
Put previously isolated folio onto appropriate LRU list.
Parameters
struct folio *folio
Folio to be returned to an LRU list.
Description
Add previously isolated folio to appropriate LRU list. The folio may still be unevictable for other reasons.
Context
lru_lock must not be held, interrupts must be enabled.
Parameters
struct folio *folio
Folio to isolate from its LRU list.
Description
Isolate a folio from an LRU list and adjust the vmstat statistic corresponding to whatever LRU list the folio was on.
The folio will have its LRU flag cleared. If it was found on the active list, it will have the Active flag set. If it was found on the unevictable list, it will have the Unevictable flag set. These flags may need to be cleared by the caller before letting the page go.
Must be called with an elevated refcount on the folio. This is a fundamental difference from isolate_lru_folios() (which is called without a stable reference).
The lru_lock must not be held.
Interrupts must be enabled.
Context
Return
true if the folio was removed from an LRU list. false if the folio was not on an LRU list.
-
void check_move_unevictable_folios(struct folio_batch *fbatch)¶
Move evictable folios to appropriate zone lru list
Parameters
struct folio_batch *fbatch
Batch of lru folios to check.
Description
Checks folios for evictability, if an evictable folio is in the unevictable lru list, moves it to the appropriate evictable lru list. This function should be only used for lru folios.
-
void __remove_pages(unsigned long pfn, unsigned long nr_pages, struct vmem_altmap *altmap)¶
remove sections of pages
Parameters
unsigned long pfn
starting pageframe (must be aligned to start of a section)
unsigned long nr_pages
number of pages to remove (must be multiple of section size)
struct vmem_altmap *altmap
alternative device page map or
NULL
if default memmap is used
Description
Generic helper function to remove section mappings and sysfs entries for the section of the memory we are removing. Caller needs to make sure that pages are marked reserved and zones are adjust properly by calling offline_pages().
-
void try_offline_node(int nid)¶
Parameters
int nid
the node ID
Description
Offline a node if all memory sections and cpus of the node are removed.
NOTE
The caller must call lock_device_hotplug() to serialize hotplug and online/offline operations before this call.
-
void __remove_memory(u64 start, u64 size)¶
Remove memory if every memory block is offline
Parameters
u64 start
physical address of the region to remove
u64 size
size of the region to remove
NOTE
The caller must call lock_device_hotplug() to serialize hotplug
and online/offline operations before this call, as required by
try_offline_node()
.
-
unsigned long mmu_interval_read_begin(struct mmu_interval_notifier *interval_sub)¶
Begin a read side critical section against a VA range
Parameters
struct mmu_interval_notifier *interval_sub
The interval subscription
Description
mmu_iterval_read_begin()/mmu_iterval_read_retry() implement a collision-retry scheme similar to seqcount for the VA range under subscription. If the mm invokes invalidation during the critical section then mmu_interval_read_retry() will return true.
This is useful to obtain shadow PTEs where teardown or setup of the SPTEs require a blocking context. The critical region formed by this can sleep, and the required 'user_lock' can also be a sleeping lock.
The caller is required to provide a 'user_lock' to serialize both teardown and setup.
The return value should be passed to mmu_interval_read_retry().
-
int mmu_notifier_register(struct mmu_notifier *subscription, struct mm_struct *mm)¶
Register a notifier on a mm
Parameters
struct mmu_notifier *subscription
The notifier to attach
struct mm_struct *mm
The mm to attach the notifier to
Description
Must not hold mmap_lock nor any other VM related lock when calling this registration function. Must also ensure mm_users can't go down to zero while this runs to avoid races with mmu_notifier_release, so mm has to be current->mm or the mm should be pinned safely such as with get_task_mm(). If the mm is not current->mm, the mm_users pin should be released by calling mmput after mmu_notifier_register returns.
mmu_notifier_unregister() or mmu_notifier_put()
must be always called to
unregister the notifier.
While the caller has a mmu_notifier get the subscription->mm pointer will remain valid, and can be converted to an active mm pointer via mmget_not_zero().
-
struct mmu_notifier *mmu_notifier_get_locked(const struct mmu_notifier_ops *ops, struct mm_struct *mm)¶
Return the single struct mmu_notifier for the mm & ops
Parameters
const struct mmu_notifier_ops *ops
The operations struct being subscribe with
struct mm_struct *mm
The mm to attach notifiers too
Description
This function either allocates a new mmu_notifier via ops->alloc_notifier(), or returns an already existing notifier on the list. The value of the ops pointer is used to determine when two notifiers are the same.
Each call to mmu_notifier_get() must be paired with a call to
mmu_notifier_put()
. The caller must hold the write side of mm->mmap_lock.
While the caller has a mmu_notifier get the mm pointer will remain valid, and can be converted to an active mm pointer via mmget_not_zero().
-
void mmu_notifier_put(struct mmu_notifier *subscription)¶
Release the reference on the notifier
Parameters
struct mmu_notifier *subscription
The notifier to act on
Description
This function must be paired with each mmu_notifier_get(), it releases the reference obtained by the get. If this is the last reference then process to free the notifier will be run asynchronously.
Unlike mmu_notifier_unregister() the get/put flow only calls ops->release when the mm_struct is destroyed. Instead free_notifier is always called to release any resources held by the user.
As ops->release is not guaranteed to be called, the user must ensure that
all sptes are dropped, and no new sptes can be established before
mmu_notifier_put()
is called.
This function can be called from the ops->release callback, however the caller must still ensure it is called pairwise with mmu_notifier_get().
Modules calling this function must call mmu_notifier_synchronize()
in
their __exit functions to ensure the async work is completed.
-
int mmu_interval_notifier_insert(struct mmu_interval_notifier *interval_sub, struct mm_struct *mm, unsigned long start, unsigned long length, const struct mmu_interval_notifier_ops *ops)¶
Insert an interval notifier
Parameters
struct mmu_interval_notifier *interval_sub
Interval subscription to register
struct mm_struct *mm
mm_struct to attach to
unsigned long start
Starting virtual address to monitor
unsigned long length
Length of the range to monitor
const struct mmu_interval_notifier_ops *ops
Interval notifier operations to be called on matching events
Description
This function subscribes the interval notifier for notifications from the mm. Upon return the ops related to mmu_interval_notifier will be called whenever an event that intersects with the given range occurs.
Upon return the range_notifier may not be present in the interval tree yet.
The caller must use the normal interval notifier read flow via
mmu_interval_read_begin()
to establish SPTEs for this range.
-
void mmu_interval_notifier_remove(struct mmu_interval_notifier *interval_sub)¶
Remove a interval notifier
Parameters
struct mmu_interval_notifier *interval_sub
Interval subscription to unregister
Description
This function must be paired with mmu_interval_notifier_insert()
. It cannot
be called from any ops callback.
Once this returns ops callbacks are no longer running on other CPUs and will not be called in future.
-
void mmu_notifier_synchronize(void)¶
Ensure all mmu_notifiers are freed
Parameters
void
no arguments
Description
This function ensures that all outstanding async SRU work from
mmu_notifier_put()
is completed. After it returns any mmu_notifier_ops
associated with an unused mmu_notifier will no longer be called.
Before using the caller must ensure that all of its mmu_notifiers have been
fully released via mmu_notifier_put()
.
Modules using the mmu_notifier_put()
API should call this in their __exit
function to avoid module unloading races.
-
size_t balloon_page_list_enqueue(struct balloon_dev_info *b_dev_info, struct list_head *pages)¶
inserts a list of pages into the balloon page list.
Parameters
struct balloon_dev_info *b_dev_info
balloon device descriptor where we will insert a new page to
struct list_head *pages
pages to enqueue - allocated using balloon_page_alloc.
Description
Driver must call this function to properly enqueue balloon pages before definitively removing them from the guest system.
Return
number of pages that were enqueued.
-
size_t balloon_page_list_dequeue(struct balloon_dev_info *b_dev_info, struct list_head *pages, size_t n_req_pages)¶
removes pages from balloon's page list and returns a list of the pages.
Parameters
struct balloon_dev_info *b_dev_info
balloon device descriptor where we will grab a page from.
struct list_head *pages
pointer to the list of pages that would be returned to the caller.
size_t n_req_pages
number of requested pages.
Description
Driver must call this function to properly de-allocate a previous enlisted balloon pages before definitively releasing it back to the guest system. This function tries to remove n_req_pages from the ballooned pages and return them to the caller in the pages list.
Note that this function may fail to dequeue some pages even if the balloon isn't empty - since the page list can be temporarily empty due to compaction of isolated pages.
Return
number of pages that were added to the pages list.
-
vm_fault_t vmf_insert_pfn_pmd(struct vm_fault *vmf, pfn_t pfn, bool write)¶
insert a pmd size pfn
Parameters
struct vm_fault *vmf
Structure describing the fault
pfn_t pfn
pfn to insert
bool write
whether it's a write fault
Description
Insert a pmd size pfn. See vmf_insert_pfn()
for additional info.
Return
vm_fault_t value.
-
vm_fault_t vmf_insert_pfn_pud(struct vm_fault *vmf, pfn_t pfn, bool write)¶
insert a pud size pfn
Parameters
struct vm_fault *vmf
Structure describing the fault
pfn_t pfn
pfn to insert
bool write
whether it's a write fault
Description
Insert a pud size pfn. See vmf_insert_pfn()
for additional info.
Return
vm_fault_t value.
-
int io_mapping_map_user(struct io_mapping *iomap, struct vm_area_struct *vma, unsigned long addr, unsigned long pfn, unsigned long size)¶
remap an I/O mapping to userspace
Parameters
struct io_mapping *iomap
the source io_mapping
struct vm_area_struct *vma
user vma to map to
unsigned long addr
target user address to start at
unsigned long pfn
physical address of kernel memory
unsigned long size
size of map area
Note
this is only safe if the mm semaphore is held when called.