7.13. OMAP4 ISS Driver

Author: Sergio Aguirre <sergio.a.aguirre@gmail.com>

Copyright (C) 2012, Texas Instruments

7.13.1. Introduction

The OMAP44XX family of chips contains the Imaging SubSystem (a.k.a. ISS), Which contains several components that can be categorized in 3 big groups:

  • Interfaces (2 Interfaces: CSI2-A & CSI2-B/CCP2)

  • ISP (Image Signal Processor)

  • SIMCOP (Still Image Coprocessor)

For more information, please look in 1 for latest version of: "OMAP4430 Multimedia Device Silicon Revision 2.x"

As of Revision AB, the ISS is described in detail in section 8.

This driver is supporting only the CSI2-A/B interfaces for now.

It makes use of the Media Controller framework 2, and inherited most of the code from OMAP3 ISP driver (found under drivers/media/platform/ti/omap3isp/*), except that it doesn't need an IOMMU now for ISS buffers memory mapping.

Supports usage of MMAP buffers only (for now).

7.13.2. Tested platforms

  • OMAP4430SDP, w/ ES2.1 GP & SEVM4430-CAM-V1-0 (Contains IMX060 & OV5640, in which only the last one is supported, outputting YUV422 frames).

  • TI Blaze MDP, w/ OMAP4430 ES2.2 EMU (Contains 1 IMX060 & 2 OV5650 sensors, in which only the OV5650 are supported, outputting RAW10 frames).

  • PandaBoard, Rev. A2, w/ OMAP4430 ES2.1 GP & OV adapter board, tested with following sensors: * OV5640 * OV5650

  • Tested on mainline kernel:

    Tag: v3.3 (commit c16fa4f2ad19908a47c63d8fa436a1178438c7e7)

7.13.3. File list

drivers/staging/media/omap4iss/ include/linux/platform_data/media/omap4iss.h

7.13.4. References

1

http://focus.ti.com/general/docs/wtbu/wtbudocumentcenter.tsp?navigationId=12037&templateId=6123#62

2

http://lwn.net/Articles/420485/