Kernel driver ibm-cffps

Supported chips:

  • IBM Common Form Factor power supply

Author: Eddie James <eajames@us.ibm.com>

Description

This driver supports IBM Common Form Factor (CFF) power supplies. This driver is a client to the core PMBus driver.

Usage Notes

This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see How to instantiate I2C devices for details.

Sysfs entries

The following attributes are supported:

curr1_alarm

Output current over-current alarm.

curr1_input

Measured output current in mA.

curr1_label

"iout1"

fan1_alarm

Fan 1 warning.

fan1_fault

Fan 1 fault.

fan1_input

Fan 1 speed in RPM.

fan2_alarm

Fan 2 warning.

fan2_fault

Fan 2 fault.

fan2_input

Fan 2 speed in RPM.

in1_alarm

Input voltage under-voltage alarm.

in1_input

Measured input voltage in mV.

in1_label

"vin"

in2_alarm

Output voltage over-voltage alarm.

in2_input

Measured output voltage in mV.

in2_label

"vout1"

power1_alarm

Input fault or alarm.

power1_input

Measured input power in uW.

power1_label

"pin"

temp1_alarm

PSU inlet ambient temperature over-temperature alarm.

temp1_input

Measured PSU inlet ambient temp in millidegrees C.

temp2_alarm

Secondary rectifier temp over-temperature alarm.

temp2_input

Measured secondary rectifier temp in millidegrees C.

temp3_alarm

ORing FET temperature over-temperature alarm.

temp3_input

Measured ORing FET temperature in millidegrees C.