Kernel driver hih6130¶
Supported chips:
Honeywell HIH-6130 / HIH-6131
Prefix: 'hih6130'
Addresses scanned: none
Datasheet: Publicly available at the Honeywell website
- Author:
Iain Paton <ipaton0@gmail.com>
Description¶
The HIH-6130 & HIH-6131 are humidity and temperature sensors in a SO8 package. The difference between the two devices is that the HIH-6131 has a condensation filter.
The devices communicate with the I2C protocol. All sensors are set to the same I2C address 0x27 by default, so an entry with I2C_BOARD_INFO("hih6130", 0x27) can be used in the board setup code.
Please see How to instantiate I2C devices for details on how to instantiate I2C devices.
sysfs-Interface¶
- temp1_input
temperature input
- humidity1_input
humidity input
Notes¶
Command mode and alarms are not currently supported.