Kernel driver bpa-rs600¶
Supported chips:
BPA-RS600-120
- Datasheet: Publicly available at the BluTek website
http://blutekpower.com/wp-content/uploads/2019/01/BPA-RS600-120-07-19-2018.pdf
- Authors:
Chris Packham <chris.packham@alliedtelesis.co.nz>
Description¶
The BPA-RS600 is a compact 600W removable power supply module.
Usage Notes¶
This driver does not probe for PMBus devices. You will have to instantiate devices explicitly.
Sysfs attributes¶
curr1_label |
"iin" |
curr1_input |
Measured input current |
curr1_max |
Maximum input current |
curr1_max_alarm |
Input current high alarm |
curr2_label |
"iout1" |
curr2_input |
Measured output current |
curr2_max |
Maximum output current |
curr2_max_alarm |
Output current high alarm |
fan1_input |
Measured fan speed |
fan1_alarm |
Fan warning |
fan1_fault |
Fan fault |
in1_label |
"vin" |
in1_input |
Measured input voltage |
in1_max |
Maximum input voltage |
in1_max_alarm |
Input voltage high alarm |
in1_min |
Minimum input voltage |
in1_min_alarm |
Input voltage low alarm |
in2_label |
"vout1" |
in2_input |
Measured output voltage |
in2_max |
Maximum output voltage |
in2_max_alarm |
Output voltage high alarm |
in2_min |
Maximum output voltage |
in2_min_alarm |
Output voltage low alarm |
power1_label |
"pin" |
power1_input |
Measured input power |
power1_alarm |
Input power alarm |
power1_max |
Maximum input power |
power2_label |
"pout1" |
power2_input |
Measured output power |
power2_max |
Maximum output power |
power2_max_alarm |
Output power high alarm |
temp1_input |
Measured temperature around input connector |
temp1_alarm |
Temperature alarm |
temp2_input |
Measured temperature around output connector |
temp2_alarm |
Temperature alarm |