AMDgpu Display Manager¶
Table of Contents
The AMDgpu display manager, amdgpu_dm (or even simpler, dm) sits between DRM and DC. It acts as a liaison, converting DRM requests into DC requests, and DC responses into DRM responses.
The root control structure is struct amdgpu_display_manager
.
-
struct dm_compressor_info¶
Buffer info used by frame buffer compression
Definition:
struct dm_compressor_info {
void *cpu_addr;
struct amdgpu_bo *bo_ptr;
uint64_t gpu_addr;
};
Members
cpu_addr
MMIO cpu addr
bo_ptr
Pointer to the buffer object
gpu_addr
MMIO gpu addr
-
struct dmub_hpd_work¶
Handle time consuming work in low priority outbox IRQ
Definition:
struct dmub_hpd_work {
struct work_struct handle_hpd_work;
struct dmub_notification *dmub_notify;
struct amdgpu_device *adev;
};
Members
handle_hpd_work
Work to be executed in a separate thread to handle hpd_low_irq
dmub_notify
notification for callback function
adev
amdgpu_device pointer
-
struct vblank_control_work¶
Work data for vblank control
Definition:
struct vblank_control_work {
struct work_struct work;
struct amdgpu_display_manager *dm;
struct amdgpu_crtc *acrtc;
struct dc_stream_state *stream;
bool enable;
};
Members
work
Kernel work data for the work event
dm
amdgpu display manager device
acrtc
amdgpu CRTC instance for which the event has occurred
stream
DC stream for which the event has occurred
enable
true if enabling vblank
-
struct amdgpu_dm_backlight_caps¶
Information about backlight
Definition:
struct amdgpu_dm_backlight_caps {
union dpcd_sink_ext_caps *ext_caps;
u32 aux_min_input_signal;
u32 aux_max_input_signal;
int min_input_signal;
int max_input_signal;
bool caps_valid;
bool aux_support;
};
Members
ext_caps
Keep the data struct with all the information about the display support for HDR.
aux_min_input_signal
Min brightness value supported by the display
aux_max_input_signal
Max brightness value supported by the display in nits.
min_input_signal
minimum possible input in range 0-255.
max_input_signal
maximum possible input in range 0-255.
caps_valid
true if these values are from the ACPI interface.
aux_support
Describes if the display supports AUX backlight.
Description
Describe the backlight support for ACPI or eDP AUX.
-
struct dal_allocation¶
Tracks mapped FB memory for SMU communication
Definition:
struct dal_allocation {
struct list_head list;
struct amdgpu_bo *bo;
void *cpu_ptr;
u64 gpu_addr;
};
Members
list
list of dal allocations
bo
GPU buffer object
cpu_ptr
CPU virtual address of the GPU buffer object
gpu_addr
GPU virtual address of the GPU buffer object
-
struct hpd_rx_irq_offload_work_queue¶
Work queue to handle hpd_rx_irq offload work
Definition:
struct hpd_rx_irq_offload_work_queue {
struct workqueue_struct *wq;
spinlock_t offload_lock;
bool is_handling_link_loss;
bool is_handling_mst_msg_rdy_event;
struct amdgpu_dm_connector *aconnector;
};
Members
wq
workqueue structure to queue offload work.
offload_lock
To protect fields of offload work queue.
is_handling_link_loss
Used to prevent inserting link loss event when we're handling link loss
is_handling_mst_msg_rdy_event
Used to prevent inserting mst message ready event when we're already handling mst message ready event
aconnector
The aconnector that this work queue is attached to
-
struct hpd_rx_irq_offload_work¶
hpd_rx_irq offload work structure
Definition:
struct hpd_rx_irq_offload_work {
struct work_struct work;
union hpd_irq_data data;
struct hpd_rx_irq_offload_work_queue *offload_wq;
};
Members
work
offload work
data
reference irq data which is used while handling offload work
offload_wq
offload work queue that this work is queued to
-
struct amdgpu_display_manager¶
Central amdgpu display manager device
Definition:
struct amdgpu_display_manager {
struct dc *dc;
struct dmub_srv *dmub_srv;
struct dmub_notification *dmub_notify;
dmub_notify_interrupt_callback_t dmub_callback[AMDGPU_DMUB_NOTIFICATION_MAX];
bool dmub_thread_offload[AMDGPU_DMUB_NOTIFICATION_MAX];
struct dmub_srv_fb_info *dmub_fb_info;
const struct firmware *dmub_fw;
struct amdgpu_bo *dmub_bo;
u64 dmub_bo_gpu_addr;
void *dmub_bo_cpu_addr;
uint32_t dmcub_fw_version;
struct cgs_device *cgs_device;
struct amdgpu_device *adev;
struct drm_device *ddev;
u16 display_indexes_num;
struct drm_private_obj atomic_obj;
struct mutex dc_lock;
struct mutex audio_lock;
struct drm_audio_component *audio_component;
bool audio_registered;
struct list_head irq_handler_list_low_tab[DAL_IRQ_SOURCES_NUMBER];
struct list_head irq_handler_list_high_tab[DAL_IRQ_SOURCES_NUMBER];
struct common_irq_params pflip_params[DC_IRQ_SOURCE_PFLIP_LAST - DC_IRQ_SOURCE_PFLIP_FIRST + 1];
struct common_irq_params vblank_params[DC_IRQ_SOURCE_VBLANK6 - DC_IRQ_SOURCE_VBLANK1 + 1];
struct common_irq_params vline0_params[DC_IRQ_SOURCE_DC6_VLINE0 - DC_IRQ_SOURCE_DC1_VLINE0 + 1];
struct common_irq_params vupdate_params[DC_IRQ_SOURCE_VUPDATE6 - DC_IRQ_SOURCE_VUPDATE1 + 1];
struct common_irq_params dmub_trace_params[1];
struct common_irq_params dmub_outbox_params[1];
spinlock_t irq_handler_list_table_lock;
struct backlight_device *backlight_dev[AMDGPU_DM_MAX_NUM_EDP];
const struct dc_link *backlight_link[AMDGPU_DM_MAX_NUM_EDP];
uint8_t num_of_edps;
struct amdgpu_dm_backlight_caps backlight_caps[AMDGPU_DM_MAX_NUM_EDP];
struct mod_freesync *freesync_module;
struct hdcp_workqueue *hdcp_workqueue;
struct workqueue_struct *vblank_control_workqueue;
struct drm_atomic_state *cached_state;
struct dc_state *cached_dc_state;
struct dm_compressor_info compressor;
const struct firmware *fw_dmcu;
uint32_t dmcu_fw_version;
const struct gpu_info_soc_bounding_box_v1_0 *soc_bounding_box;
uint32_t active_vblank_irq_count;
#if defined(CONFIG_DRM_AMD_SECURE_DISPLAY);
struct secure_display_context *secure_display_ctxs;
#endif;
struct hpd_rx_irq_offload_work_queue *hpd_rx_offload_wq;
struct amdgpu_encoder mst_encoders[AMDGPU_DM_MAX_CRTC];
bool force_timing_sync;
bool disable_hpd_irq;
bool dmcub_trace_event_en;
struct list_head da_list;
struct completion dmub_aux_transfer_done;
struct workqueue_struct *delayed_hpd_wq;
u32 brightness[AMDGPU_DM_MAX_NUM_EDP];
u32 actual_brightness[AMDGPU_DM_MAX_NUM_EDP];
bool aux_hpd_discon_quirk;
struct mutex dpia_aux_lock;
};
Members
dc
Display Core control structure
dmub_srv
DMUB service, used for controlling the DMUB on hardware that supports it. The pointer to the dmub_srv will be NULL on hardware that does not support it.
dmub_notify
Notification from DMUB.
dmub_callback
Callback functions to handle notification from DMUB.
dmub_thread_offload
Flag to indicate if callback is offload.
dmub_fb_info
Framebuffer regions for the DMUB.
dmub_fw
DMUB firmware, required on hardware that has DMUB support.
dmub_bo
Buffer object for the DMUB.
dmub_bo_gpu_addr
GPU virtual address for the DMUB buffer object.
dmub_bo_cpu_addr
CPU address for the DMUB buffer object.
dmcub_fw_version
DMCUB firmware version.
cgs_device
The Common Graphics Services device. It provides an interface for accessing registers.
adev
AMDGPU base driver structure
ddev
DRM base driver structure
display_indexes_num
Max number of display streams supported
atomic_obj
In combination with
dm_atomic_state
it helps manage global atomic state that doesn't map cleanly into existing drm resources, likedc_context
.dc_lock
Guards access to DC functions that can issue register write sequences.
audio_lock
Guards access to audio instance changes.
audio_component
Used to notify ELD changes to sound driver.
audio_registered
True if the audio component has been registered successfully, false otherwise.
irq_handler_list_low_tab
Low priority IRQ handler table.
It is a n*m table consisting of n IRQ sources, and m handlers per IRQ source. Low priority IRQ handlers are deferred to a workqueue to be processed. Hence, they can sleep.
Note that handlers are called in the same order as they were registered (FIFO).
irq_handler_list_high_tab
High priority IRQ handler table.
It is a n*m table, same as
irq_handler_list_low_tab
. However, handlers in this table are not deferred and are called immediately.pflip_params
Page flip IRQ parameters, passed to registered handlers when triggered.
vblank_params
Vertical blanking IRQ parameters, passed to registered handlers when triggered.
vline0_params
OTG vertical interrupt0 IRQ parameters, passed to registered handlers when triggered.
vupdate_params
Vertical update IRQ parameters, passed to registered handlers when triggered.
dmub_trace_params
DMUB trace event IRQ parameters, passed to registered handlers when triggered.
dmub_outbox_params
DMUB Outbox parameters
irq_handler_list_table_lock
Synchronizes access to IRQ tables
backlight_dev
Backlight control device
backlight_link
Link on which to control backlight
num_of_edps
number of backlight eDPs
backlight_caps
Capabilities of the backlight device
freesync_module
Module handling freesync calculations
hdcp_workqueue
AMDGPU content protection queue
vblank_control_workqueue
Deferred work for vblank control events.
cached_state
Caches device atomic state for suspend/resume
cached_dc_state
Cached state of content streams
compressor
Frame buffer compression buffer. See
struct dm_compressor_info
fw_dmcu
Reference to DMCU firmware
dmcu_fw_version
Version of the DMCU firmware
soc_bounding_box
gpu_info FW provided soc bounding box struct or 0 if not available in FW
active_vblank_irq_count
number of currently active vblank irqs
secure_display_ctxs
Store the ROI information and the work_struct to command dmub and psp for all crtcs.
hpd_rx_offload_wq
Work queue to offload works of hpd_rx_irq
mst_encoders
fake encoders used for DP MST.
force_timing_sync
set via debugfs. When set, indicates that all connected displays will be forced to synchronize.
disable_hpd_irq
disables all HPD and HPD RX interrupt handling in the driver when true
dmcub_trace_event_en
enable dmcub trace events
da_list
DAL fb memory allocation list, for communication with SMU.
dmub_aux_transfer_done
struct completion used to indicate when DMUB transfers are done
delayed_hpd_wq
work queue used to delay DMUB HPD work
brightness
cached backlight values.
actual_brightness
last successfully applied backlight values.
aux_hpd_discon_quirk
quirk for hpd discon while aux is on-going. occurred on certain intel platform
dpia_aux_lock
Guards access to DPIA AUX
-
struct amdgpu_hdmi_vsdb_info¶
Keep track of the VSDB info
Definition:
struct amdgpu_hdmi_vsdb_info {
unsigned int amd_vsdb_version;
bool freesync_supported;
unsigned int min_refresh_rate_hz;
unsigned int max_refresh_rate_hz;
};
Members
amd_vsdb_version
Vendor Specific Data Block Version, should be used to determine which Vendor Specific InfoFrame (VSIF) to send.
freesync_supported
FreeSync Supported.
min_refresh_rate_hz
FreeSync Minimum Refresh Rate in Hz.
max_refresh_rate_hz
FreeSync Maximum Refresh Rate in Hz
Description
AMDGPU supports FreeSync over HDMI by using the VSDB section, and this struct is useful to keep track of the display-specific information about FreeSync.
Lifecycle¶
DM (and consequently DC) is registered in the amdgpu base driver as a IP block. When CONFIG_DRM_AMD_DC is enabled, the DM device IP block is added to the base driver's device list to be initialized and torn down accordingly.
The functions to do so are provided as hooks in struct amd_ip_funcs
.
-
int dm_hw_init(void *handle)¶
Initialize DC device
Parameters
void *handle
The base driver device containing the amdgpu_dm device.
Description
Initialize the struct amdgpu_display_manager
device. This involves calling
the initializers of each DM component, then populating the struct with them.
Although the function implies hardware initialization, both hardware and software are initialized here. Splitting them out to their relevant init hooks is a future TODO item.
Some notable things that are initialized here:
Display Core, both software and hardware
DC modules that we need (freesync and color management)
DRM software states
Interrupt sources and handlers
Vblank support
Debug FS entries, if enabled
-
int dm_hw_fini(void *handle)¶
Teardown DC device
Parameters
void *handle
The base driver device containing the amdgpu_dm device.
Description
Teardown components within struct amdgpu_display_manager
that require
cleanup. This involves cleaning up the DRM device, DC, and any modules that
were loaded. Also flush IRQ workqueues and disable them.
Interrupts¶
DM provides another layer of IRQ management on top of what the base driver already provides. This is something that could be cleaned up, and is a future TODO item.
The base driver provides IRQ source registration with DRM, handler
registration into the base driver's IRQ table, and a handler callback
amdgpu_irq_handler()
, with which DRM calls on interrupts. This generic
handler looks up the IRQ table, and calls the respective
amdgpu_irq_src_funcs.process
hookups.
What DM provides on top are two IRQ tables specifically for top-half and bottom-half IRQ handling, with the bottom-half implementing workqueues:
They override the base driver's IRQ table, and the effect can be seen
in the hooks that DM provides for amdgpu_irq_src_funcs.process
. They
are all set to the DM generic handler amdgpu_dm_irq_handler()
, which looks up
DM's IRQ tables. However, in order for base driver to recognize this hook, DM
still needs to register the IRQ with the base driver. See
dce110_register_irq_handlers() and dcn10_register_irq_handlers().
To expose DC's hardware interrupt toggle to the base driver, DM implements
amdgpu_irq_src_funcs.set
hooks. Base driver calls it through
amdgpu_irq_update()
to enable or disable the interrupt.
-
struct amdgpu_dm_irq_handler_data¶
Data for DM interrupt handlers.
Definition:
struct amdgpu_dm_irq_handler_data {
struct list_head list;
interrupt_handler handler;
void *handler_arg;
struct amdgpu_display_manager *dm;
enum dc_irq_source irq_source;
struct work_struct work;
};
Members
list
Linked list entry referencing the next/previous handler
handler
Handler function
handler_arg
Argument passed to the handler when triggered
dm
DM which this handler belongs to
irq_source
DC interrupt source that this handler is registered for
work
work struct
-
void dm_irq_work_func(struct work_struct *work)¶
Handle an IRQ outside of the interrupt handler proper.
Parameters
struct work_struct *work
work struct
-
void unregister_all_irq_handlers(struct amdgpu_device *adev)¶
Cleans up handlers from the DM IRQ table
Parameters
struct amdgpu_device *adev
The base driver device containing the DM device
Description
Go through low and high context IRQ tables and deallocate handlers.
-
void *amdgpu_dm_irq_register_interrupt(struct amdgpu_device *adev, struct dc_interrupt_params *int_params, void (*ih)(void*), void *handler_args)¶
Register a handler within DM.
Parameters
struct amdgpu_device *adev
The base driver device containing the DM device.
struct dc_interrupt_params *int_params
Interrupt parameters containing the source, and handler context
void (*ih)(void *)
Function pointer to the interrupt handler to register
void *handler_args
Arguments passed to the handler when the interrupt occurs
Description
Register an interrupt handler for the given IRQ source, under the given context. The context can either be high or low. High context handlers are executed directly within ISR context, while low context is executed within a workqueue, thereby allowing operations that sleep.
Registered handlers are called in a FIFO manner, i.e. the most recently registered handler will be called first.
Return
- Handler data
struct amdgpu_dm_irq_handler_data
containing the IRQ source, handler function, and args
-
void amdgpu_dm_irq_unregister_interrupt(struct amdgpu_device *adev, enum dc_irq_source irq_source, void *ih)¶
Remove a handler from the DM IRQ table
Parameters
struct amdgpu_device *adev
The base driver device containing the DM device
enum dc_irq_source irq_source
IRQ source to remove the given handler from
void *ih
Function pointer to the interrupt handler to unregister
Description
Go through both low and high context IRQ tables, and find the given handler for the given irq source. If found, remove it. Otherwise, do nothing.
-
int amdgpu_dm_irq_init(struct amdgpu_device *adev)¶
Initialize DM IRQ management
Parameters
struct amdgpu_device *adev
The base driver device containing the DM device
Description
Initialize DM's high and low context IRQ tables.
The N by M table contains N IRQ sources, with M
struct amdgpu_dm_irq_handler_data
hooked together in a linked list. The
list_heads are initialized here. When an interrupt n is triggered, all m
handlers are called in sequence, FIFO according to registration order.
The low context table requires special steps to initialize, since handlers
will be deferred to a workqueue. See struct irq_list_head
.
-
void amdgpu_dm_irq_fini(struct amdgpu_device *adev)¶
Tear down DM IRQ management
Parameters
struct amdgpu_device *adev
The base driver device containing the DM device
Description
Flush all work within the low context IRQ table.
-
int amdgpu_dm_irq_handler(struct amdgpu_device *adev, struct amdgpu_irq_src *source, struct amdgpu_iv_entry *entry)¶
Generic DM IRQ handler
Parameters
struct amdgpu_device *adev
amdgpu base driver device containing the DM device
struct amdgpu_irq_src *source
Unused
struct amdgpu_iv_entry *entry
Data about the triggered interrupt
Description
Calls all registered high irq work immediately, and schedules work for low irq. The DM IRQ table is used to find the corresponding handlers.
-
void amdgpu_dm_hpd_init(struct amdgpu_device *adev)¶
hpd setup callback.
Parameters
struct amdgpu_device *adev
amdgpu_device pointer
Description
Setup the hpd pins used by the card (evergreen+). Enable the pin, set the polarity, and enable the hpd interrupts.
-
void amdgpu_dm_hpd_fini(struct amdgpu_device *adev)¶
hpd tear down callback.
Parameters
struct amdgpu_device *adev
amdgpu_device pointer
Description
Tear down the hpd pins used by the card (evergreen+). Disable the hpd interrupts.
-
void dm_pflip_high_irq(void *interrupt_params)¶
Handle pageflip interrupt
Parameters
void *interrupt_params
ignored
Description
Handles the pageflip interrupt by notifying all interested parties that the pageflip has been completed.
-
void dm_crtc_high_irq(void *interrupt_params)¶
Handles CRTC interrupt
Parameters
void *interrupt_params
used for determining the CRTC instance
Description
Handles the CRTC/VSYNC interrupt by notfying DRM's VBLANK event handler.
Atomic Implementation¶
WIP
-
void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state)¶
AMDgpu DM's commit tail implementation.
Parameters
struct drm_atomic_state *state
The atomic state to commit
Description
This will tell DC to commit the constructed DC state from atomic_check, programming the hardware. Any failures here implies a hardware failure, since atomic check should have filtered anything non-kosher.
-
int amdgpu_dm_atomic_check(struct drm_device *dev, struct drm_atomic_state *state)¶
Atomic check implementation for AMDgpu DM.
Parameters
struct drm_device *dev
The DRM device
struct drm_atomic_state *state
The atomic state to commit
Description
Validate that the given atomic state is programmable by DC into hardware.
This involves constructing a struct dc_state
reflecting the new hardware
state we wish to commit, then querying DC to see if it is programmable. It's
important not to modify the existing DC state. Otherwise, atomic_check
may unexpectedly commit hardware changes.
When validating the DC state, it's important that the right locks are acquired. For full updates case which removes/adds/updates streams on one CRTC while flipping on another CRTC, acquiring global lock will guarantee that any such full update commit will wait for completion of any outstanding flip using DRMs synchronization events.
Note that DM adds the affected connectors for all CRTCs in state, when that might not seem necessary. This is because DC stream creation requires the DC sink, which is tied to the DRM connector state. Cleaning this up should be possible but non-trivial - a possible TODO item.
Return
-Error code if validation failed.
Color Management Properties¶
The DC interface to HW gives us the following color management blocks per pipe (surface):
Input gamma LUT (de-normalized)
Input CSC (normalized)
Surface degamma LUT (normalized)
Surface CSC (normalized)
Surface regamma LUT (normalized)
Output CSC (normalized)
But these aren't a direct mapping to DRM color properties. The current DRM interface exposes CRTC degamma, CRTC CTM and CRTC regamma while our hardware is essentially giving:
Plane CTM -> Plane degamma -> Plane CTM -> Plane regamma -> Plane CTM
The input gamma LUT block isn't really applicable here since it operates on the actual input data itself rather than the HW fp representation. The input and output CSC blocks are technically available to use as part of the DC interface but are typically used internally by DC for conversions between color spaces. These could be blended together with user adjustments in the future but for now these should remain untouched.
The pipe blending also happens after these blocks so we don't actually support any CRTC props with correct blending with multiple planes - but we can still support CRTC color management properties in DM in most single plane cases correctly with clever management of the DC interface in DM.
As per DRM documentation, blocks should be in hardware bypass when their respective property is set to NULL. A linear DGM/RGM LUT should also considered as putting the respective block into bypass mode.
This means that the following configuration is assumed to be the default:
Plane DGM Bypass -> Plane CTM Bypass -> Plane RGM Bypass -> ... CRTC DGM Bypass -> CRTC CTM Bypass -> CRTC RGM Bypass
-
void amdgpu_dm_init_color_mod(void)¶
Initialize the color module.
Parameters
void
no arguments
Description
We're not using the full color module, only certain components. Only call setup functions for components that we need.
-
const struct drm_color_lut *__extract_blob_lut(const struct drm_property_blob *blob, uint32_t *size)¶
Extracts the DRM lut and lut size from a blob.
Parameters
const struct drm_property_blob *blob
DRM color mgmt property blob
uint32_t *size
lut size
Return
DRM LUT or NULL
-
bool __is_lut_linear(const struct drm_color_lut *lut, uint32_t size)¶
check if the given lut is a linear mapping of values
Parameters
const struct drm_color_lut *lut
given lut to check values
uint32_t size
lut size
Description
It is considered linear if the lut represents: f(a) = (0xFF00/MAX_COLOR_LUT_ENTRIES-1)a; for integer a in [0, MAX_COLOR_LUT_ENTRIES)
Return
True if the given lut is a linear mapping of values, i.e. it acts like a bypass LUT. Otherwise, false.
-
void __drm_lut_to_dc_gamma(const struct drm_color_lut *lut, struct dc_gamma *gamma, bool is_legacy)¶
convert the drm_color_lut to dc_gamma.
Parameters
const struct drm_color_lut *lut
DRM lookup table for color conversion
struct dc_gamma *gamma
DC gamma to set entries
bool is_legacy
legacy or atomic gamma
Description
The conversion depends on the size of the lut - whether or not it's legacy.
-
void __drm_ctm_to_dc_matrix(const struct drm_color_ctm *ctm, struct fixed31_32 *matrix)¶
converts a DRM CTM to a DC CSC float matrix
Parameters
const struct drm_color_ctm *ctm
DRM color transformation matrix
struct fixed31_32 *matrix
DC CSC float matrix
Description
The matrix needs to be a 3x4 (12 entry) matrix.
-
int __set_legacy_tf(struct dc_transfer_func *func, const struct drm_color_lut *lut, uint32_t lut_size, bool has_rom)¶
Calculates the legacy transfer function
Parameters
struct dc_transfer_func *func
transfer function
const struct drm_color_lut *lut
lookup table that defines the color space
uint32_t lut_size
size of respective lut
bool has_rom
if ROM can be used for hardcoded curve
Description
Only for sRGB input space
Return
0 in case of success, -ENOMEM if fails
-
int __set_output_tf(struct dc_transfer_func *func, const struct drm_color_lut *lut, uint32_t lut_size, bool has_rom)¶
calculates the output transfer function based on expected input space.
Parameters
struct dc_transfer_func *func
transfer function
const struct drm_color_lut *lut
lookup table that defines the color space
uint32_t lut_size
size of respective lut
bool has_rom
if ROM can be used for hardcoded curve
Return
0 in case of success. -ENOMEM if fails.
-
int __set_input_tf(struct dc_transfer_func *func, const struct drm_color_lut *lut, uint32_t lut_size)¶
calculates the input transfer function based on expected input space.
Parameters
struct dc_transfer_func *func
transfer function
const struct drm_color_lut *lut
lookup table that defines the color space
uint32_t lut_size
size of respective lut.
Return
0 in case of success. -ENOMEM if fails.
-
int amdgpu_dm_verify_lut_sizes(const struct drm_crtc_state *crtc_state)¶
verifies if DRM luts match the hw supported sizes
Parameters
const struct drm_crtc_state *crtc_state
the DRM CRTC state
Description
Verifies that the Degamma and Gamma LUTs attached to the crtc_state
are of the expected size.
Return
0 on success. -EINVAL if any lut sizes are invalid.
-
int amdgpu_dm_update_crtc_color_mgmt(struct dm_crtc_state *crtc)¶
Maps DRM color management to DC stream.
Parameters
struct dm_crtc_state *crtc
amdgpu_dm crtc state
Description
With no plane level color management properties we're free to use any of the HW blocks as long as the CRTC CTM always comes before the CRTC RGM and after the CRTC DGM.
The CRTC RGM block will be placed in the RGM LUT block if it is non-linear.
The CRTC DGM block will be placed in the DGM LUT block if it is non-linear.
The CRTC CTM will be placed in the gamut remap block if it is non-linear.
The RGM block is typically more fully featured and accurate across all ASICs - DCE can't support a custom non-linear CRTC DGM.
For supporting both plane level color management and CRTC level color management at once we have to either restrict the usage of CRTC properties or blend adjustments together.
Return
0 on success. Error code if setup fails.
-
int amdgpu_dm_update_plane_color_mgmt(struct dm_crtc_state *crtc, struct dc_plane_state *dc_plane_state)¶
Maps DRM color management to DC plane.
Parameters
struct dm_crtc_state *crtc
amdgpu_dm crtc state
struct dc_plane_state *dc_plane_state
target DC surface
Description
Update the underlying dc_stream_state's input transfer function (ITF) in preparation for hardware commit. The transfer function used depends on the preparation done on the stream for color management.
Return
0 on success. -ENOMEM if mem allocation fails.
DC Color Capabilities between DCN generations¶
DRM/KMS framework defines three CRTC color correction properties: degamma, color transformation matrix (CTM) and gamma, and two properties for degamma and gamma LUT sizes. AMD DC programs some of the color correction features pre-blending but DRM/KMS has not per-plane color correction properties.
In general, the DRM CRTC color properties are programmed to DC, as follows: CRTC gamma after blending, and CRTC degamma pre-blending. Although CTM is programmed after blending, it is mapped to DPP hw blocks (pre-blending). Other color caps available in the hw is not currently exposed by DRM interface and are bypassed.
Color management caps (DPP and MPC)
Modules/color calculates various color operations which are translated to abstracted HW. DCE 5-12 had almost no important changes, but starting with DCN1, every new generation comes with fairly major differences in color pipeline. Therefore, we abstract color pipe capabilities so modules/DM can decide mapping to HW block based on logical capabilities.
-
struct rom_curve_caps¶
predefined transfer function caps for degamma and regamma
Definition:
struct rom_curve_caps {
uint16_t srgb : 1;
uint16_t bt2020 : 1;
uint16_t gamma2_2 : 1;
uint16_t pq : 1;
uint16_t hlg : 1;
};
Members
srgb
RGB color space transfer func
bt2020
BT.2020 transfer func
gamma2_2
standard gamma
pq
perceptual quantizer transfer function
hlg
hybrid log–gamma transfer function
-
struct dpp_color_caps¶
color pipeline capabilities for display pipe and plane blocks
Definition:
struct dpp_color_caps {
uint16_t dcn_arch : 1;
uint16_t input_lut_shared : 1;
uint16_t icsc : 1;
uint16_t dgam_ram : 1;
uint16_t post_csc : 1;
uint16_t gamma_corr : 1;
uint16_t hw_3d_lut : 1;
uint16_t ogam_ram : 1;
uint16_t ocsc : 1;
uint16_t dgam_rom_for_yuv : 1;
struct rom_curve_caps dgam_rom_caps;
struct rom_curve_caps ogam_rom_caps;
};
Members
dcn_arch
all DCE generations treated the same
input_lut_shared
shared with DGAM. Input LUT is different than most LUTs, just plain 256-entry lookup
icsc
input color space conversion
dgam_ram
programmable degamma LUT
post_csc
post color space conversion, before gamut remap
gamma_corr
degamma correction
hw_3d_lut
3D LUT support. It implies a shaper LUT before. It may be shared with MPC by setting mpc:shared_3d_lut flag
ogam_ram
programmable out/blend gamma LUT
ocsc
output color space conversion
dgam_rom_for_yuv
pre-defined degamma LUT for YUV planes
dgam_rom_caps
pre-definied curve caps for degamma 1D LUT
ogam_rom_caps
pre-definied curve caps for regamma 1D LUT
Note
hdr_mult and gamut remap (CTM) are always available in DPP (in that order)
-
struct mpc_color_caps¶
color pipeline capabilities for multiple pipe and plane combined blocks
Definition:
struct mpc_color_caps {
uint16_t gamut_remap : 1;
uint16_t ogam_ram : 1;
uint16_t ocsc : 1;
uint16_t num_3dluts : 3;
uint16_t shared_3d_lut:1;
struct rom_curve_caps ogam_rom_caps;
};
Members
gamut_remap
color transformation matrix
ogam_ram
programmable out gamma LUT
ocsc
output color space conversion matrix
num_3dluts
MPC 3D LUT; always assumes a preceding shaper LUT
shared_3d_lut
shared 3D LUT flag. Can be either DPP or MPC, but single instance
ogam_rom_caps
pre-definied curve caps for regamma 1D LUT
-
struct dc_color_caps¶
color pipes capabilities for DPP and MPC hw blocks
Definition:
struct dc_color_caps {
struct dpp_color_caps dpp;
struct mpc_color_caps mpc;
};
Members
dpp
color pipes caps for DPP
mpc
color pipes caps for MPC
-
enum pipe_split_policy¶
Pipe split strategy supported by DCN
Constants
MPC_SPLIT_DYNAMIC
DC will automatically decide how to split the pipe in order to bring the best trade-off between performance and power consumption. This is the recommended option.
MPC_SPLIT_AVOID
Avoid pipe split, which means that DC will not try any sort of split optimization.
MPC_SPLIT_AVOID_MULT_DISP
With this option, DC will only try to optimize the pipe utilization when using a single display; if the user connects to a second display, DC will avoid pipe split.
Description
This enum is used to define the pipe split policy supported by DCN. By default, DC favors MPC_SPLIT_DYNAMIC.
-
struct dc_clocks¶
DC pipe clocks
Definition:
struct dc_clocks {
int dispclk_khz;
int actual_dispclk_khz;
int dppclk_khz;
int actual_dppclk_khz;
int disp_dpp_voltage_level_khz;
int dcfclk_khz;
int socclk_khz;
int dcfclk_deep_sleep_khz;
int fclk_khz;
int phyclk_khz;
int dramclk_khz;
bool p_state_change_support;
enum dcn_zstate_support_state zstate_support;
bool dtbclk_en;
int ref_dtbclk_khz;
bool fclk_p_state_change_support;
enum dcn_pwr_state pwr_state;
bool prev_p_state_change_support;
bool fclk_prev_p_state_change_support;
int num_ways;
bool fw_based_mclk_switching;
bool fw_based_mclk_switching_shut_down;
int prev_num_ways;
enum dtm_pstate dtm_level;
int max_supported_dppclk_khz;
int max_supported_dispclk_khz;
int bw_dppclk_khz;
int bw_dispclk_khz;
};
Members
Description
For any clocks that may differ per pipe only the max is stored in this structure
-
struct dc_debug_options¶
DC debug struct
Definition:
struct dc_debug_options {
bool native422_support;
bool disable_dsc;
enum visual_confirm visual_confirm;
int visual_confirm_rect_height;
bool sanity_checks;
bool max_disp_clk;
bool surface_trace;
bool timing_trace;
bool clock_trace;
bool validation_trace;
bool bandwidth_calcs_trace;
int max_downscale_src_width;
bool disable_stutter;
bool use_max_lb;
enum dcc_option disable_dcc;
enum pipe_split_policy pipe_split_policy;
bool force_single_disp_pipe_split;
bool voltage_align_fclk;
bool disable_min_fclk;
bool disable_dfs_bypass;
bool disable_dpp_power_gate;
bool disable_hubp_power_gate;
bool disable_dsc_power_gate;
int dsc_min_slice_height_override;
int dsc_bpp_increment_div;
bool disable_pplib_wm_range;
enum wm_report_mode pplib_wm_report_mode;
unsigned int min_disp_clk_khz;
unsigned int min_dpp_clk_khz;
unsigned int min_dram_clk_khz;
int sr_exit_time_dpm0_ns;
int sr_enter_plus_exit_time_dpm0_ns;
int sr_exit_time_ns;
int sr_enter_plus_exit_time_ns;
int sr_exit_z8_time_ns;
int sr_enter_plus_exit_z8_time_ns;
int urgent_latency_ns;
uint32_t underflow_assert_delay_us;
int percent_of_ideal_drambw;
int dram_clock_change_latency_ns;
bool optimized_watermark;
int always_scale;
bool disable_pplib_clock_request;
bool disable_clock_gate;
bool disable_mem_low_power;
bool pstate_enabled;
bool disable_dmcu;
bool force_abm_enable;
bool disable_stereo_support;
bool vsr_support;
bool performance_trace;
bool az_endpoint_mute_only;
bool always_use_regamma;
bool recovery_enabled;
bool avoid_vbios_exec_table;
bool scl_reset_length10;
bool hdmi20_disable;
bool skip_detection_link_training;
uint32_t edid_read_retry_times;
unsigned int force_odm_combine;
unsigned int seamless_boot_odm_combine;
unsigned int force_odm_combine_4to1;
int minimum_z8_residency_time;
bool disable_z9_mpc;
unsigned int force_fclk_khz;
bool enable_tri_buf;
bool dmub_offload_enabled;
bool dmcub_emulation;
bool disable_idle_power_optimizations;
unsigned int mall_size_override;
unsigned int mall_additional_timer_percent;
bool mall_error_as_fatal;
bool dmub_command_table;
struct dc_bw_validation_profile bw_val_profile;
bool disable_fec;
bool disable_48mhz_pwrdwn;
unsigned int force_min_dcfclk_mhz;
int dwb_fi_phase;
bool disable_timing_sync;
bool cm_in_bypass;
int force_clock_mode;
bool disable_dram_clock_change_vactive_support;
bool validate_dml_output;
bool enable_dmcub_surface_flip;
bool usbc_combo_phy_reset_wa;
bool enable_dram_clock_change_one_display_vactive;
bool legacy_dp2_lt;
bool set_mst_en_for_sst;
bool disable_uhbr;
bool force_dp2_lt_fallback_method;
bool ignore_cable_id;
union mem_low_power_enable_options enable_mem_low_power;
union root_clock_optimization_options root_clock_optimization;
bool hpo_optimization;
bool force_vblank_alignment;
bool enable_dmub_aux_for_legacy_ddc;
bool disable_fams;
bool disable_fams_gaming;
uint8_t fec_enable_delay_in100us;
bool enable_driver_sequence_debug;
enum det_size crb_alloc_policy;
int crb_alloc_policy_min_disp_count;
bool disable_z10;
bool enable_z9_disable_interface;
bool psr_skip_crtc_disable;
union dpia_debug_options dpia_debug;
bool disable_fixed_vs_aux_timeout_wa;
bool force_disable_subvp;
bool force_subvp_mclk_switch;
bool allow_sw_cursor_fallback;
unsigned int force_subvp_num_ways;
unsigned int force_mall_ss_num_ways;
bool alloc_extra_way_for_cursor;
uint32_t subvp_extra_lines;
bool force_usr_allow;
bool disable_dtb_ref_clk_switch;
bool extended_blank_optimization;
union aux_wake_wa_options aux_wake_wa;
uint32_t mst_start_top_delay;
uint8_t psr_power_use_phy_fsm;
enum dml_hostvm_override_opts dml_hostvm_override;
bool dml_disallow_alternate_prefetch_modes;
bool use_legacy_soc_bb_mechanism;
bool exit_idle_opt_for_cursor_updates;
bool enable_single_display_2to1_odm_policy;
bool enable_double_buffered_dsc_pg_support;
bool enable_dp_dig_pixel_rate_div_policy;
enum lttpr_mode lttpr_mode_override;
unsigned int dsc_delay_factor_wa_x1000;
unsigned int min_prefetch_in_strobe_ns;
bool disable_unbounded_requesting;
bool dig_fifo_off_in_blank;
bool temp_mst_deallocation_sequence;
bool override_dispclk_programming;
bool disable_fpo_optimizations;
bool support_eDP1_5;
uint32_t fpo_vactive_margin_us;
bool disable_fpo_vactive;
bool disable_boot_optimizations;
bool override_odm_optimization;
bool minimize_dispclk_using_odm;
bool disable_subvp_high_refresh;
bool disable_dp_plus_plus_wa;
uint32_t fpo_vactive_min_active_margin_us;
uint32_t fpo_vactive_max_blank_us;
bool enable_legacy_fast_update;
bool disable_dc_mode_overwrite;
};
Members
pipe_split_policy
Define which pipe split policy is used by the display core.
Description
This struct provides a simple mechanism for developers to change some configurations, enable/disable features, and activate extra debug options. This can be very handy to narrow down whether some specific feature is causing an issue or not.
-
struct dc_validation_set¶
Struct to store surface/stream associations for validation
Definition:
struct dc_validation_set {
struct dc_stream_state *stream;
struct dc_plane_state *plane_states[MAX_SURFACES];
uint8_t plane_count;
};
Members
stream
Stream state properties
plane_count
Total of active planes
The color pipeline has undergone major changes between DCN hardware generations. What's possible to do before and after blending depends on hardware capabilities, as illustrated below by the DCN 2.0 and DCN 3.0 families schemas.
DCN 2.0 family color caps and mapping
DCN 3.0 family color caps and mapping
Blend Mode Properties¶
Pixel blend mode is a DRM plane composition property of drm_plane
used to
describes how pixels from a foreground plane (fg) are composited with the
background plane (bg). Here, we present main concepts of DRM blend mode to help
to understand how this property is mapped to AMD DC interface. See more about
this DRM property and the alpha blending equations in DRM Plane
Composition Properties.
Basically, a blend mode sets the alpha blending equation for plane composition that fits the mode in which the alpha channel affects the state of pixel color values and, therefore, the resulted pixel color. For example, consider the following elements of the alpha blending equation:
fg.rgb: Each of the RGB component values from the foreground's pixel.
fg.alpha: Alpha component value from the foreground's pixel.
bg.rgb: Each of the RGB component values from the background.
plane_alpha: Plane alpha value set by the plane "alpha" property, see more in DRM Plane Composition Properties.
in the basic alpha blending equation:
out.rgb = alpha * fg.rgb + (1 - alpha) * bg.rgb
the alpha channel value of each pixel in a plane is ignored and only the plane alpha affects the resulted pixel color values.
DRM has three blend mode to define the blend formula in the plane composition:
None: Blend formula that ignores the pixel alpha.
Pre-multiplied: Blend formula that assumes the pixel color values in a plane was already pre-multiplied by its own alpha channel before storage.
Coverage: Blend formula that assumes the pixel color values were not pre-multiplied with the alpha channel values.
and pre-multiplied is the default pixel blend mode, that means, when no blend mode property is created or defined, DRM considers the plane's pixels has pre-multiplied color values. On IGT GPU tools, the kms_plane_alpha_blend test provides a set of subtests to verify plane alpha and blend mode properties.
The DRM blend mode and its elements are then mapped by AMDGPU display manager (DM) to program the blending configuration of the Multiple Pipe/Plane Combined (MPC), as follows:
Multiple Pipe/Plane Combined (MPC) is a component in the hardware pipeline that performs blending of multiple planes, using global and per-pixel alpha. It also performs post-blending color correction operations according to the hardware capabilities, such as color transformation matrix and gamma 1D and 3D LUT.
-
struct mpcc_blnd_cfg¶
MPCC blending configuration
Definition:
struct mpcc_blnd_cfg {
struct tg_color black_color;
enum mpcc_alpha_blend_mode alpha_mode;
bool pre_multiplied_alpha;
int global_gain;
int global_alpha;
bool overlap_only;
int bottom_gain_mode;
int background_color_bpc;
int top_gain;
int bottom_inside_gain;
int bottom_outside_gain;
};
Members
black_color
background color
alpha_mode
alpha blend mode (MPCC_ALPHA_BLND_MODE)
pre_multiplied_alpha
whether pixel color values were pre-multiplied by the alpha channel (MPCC_ALPHA_MULTIPLIED_MODE)
global_gain
used when blend mode considers both pixel alpha and plane alpha value and assumes the global alpha value.
global_alpha
plane alpha value
Therefore, the blending configuration for a single MPCC instance on the MPC
tree is defined by mpcc_blnd_cfg
, where
pre_multiplied_alpha
is the alpha pre-multiplied mode flag used to
set MPCC_ALPHA_MULTIPLIED_MODE
. It controls whether alpha is
multiplied (true/false), being only true for DRM pre-multiplied blend mode.
mpcc_alpha_blend_mode
defines the alpha blend mode regarding pixel
alpha and plane alpha values. It sets one of the three modes for
MPCC_ALPHA_BLND_MODE
, as described below.
-
enum mpcc_alpha_blend_mode¶
define the alpha blend mode regarding pixel alpha and plane alpha values
Constants
MPCC_ALPHA_BLEND_MODE_PER_PIXEL_ALPHA
per pixel alpha using DPP alpha value
MPCC_ALPHA_BLEND_MODE_PER_PIXEL_ALPHA_COMBINED_GLOBAL_GAIN
per pixel alpha using DPP alpha value multiplied by a global gain (plane alpha)
MPCC_ALPHA_BLEND_MODE_GLOBAL_ALPHA
global alpha value, ignores pixel alpha and consider only plane alpha
DM then maps the elements of enum mpcc_alpha_blend_mode
to those in the DRM
blend formula, as follows:
MPC pixel alpha matches DRM fg.alpha as the alpha component value from the plane's pixel
MPC global alpha matches DRM plane_alpha when the pixel alpha should be ignored and, therefore, pixel values are not pre-multiplied
MPC global gain assumes MPC global alpha value when both DRM fg.alpha and DRM plane_alpha participate in the blend equation
In short, fg.alpha is ignored by selecting
MPCC_ALPHA_BLEND_MODE_GLOBAL_ALPHA
. On the other hand, (plane_alpha *
fg.alpha) component becomes available by selecting
MPCC_ALPHA_BLEND_MODE_PER_PIXEL_ALPHA_COMBINED_GLOBAL_GAIN
. And the
MPCC_ALPHA_MULTIPLIED_MODE
defines if the pixel color values are
pre-multiplied by alpha or not.
Blend configuration flow¶
The alpha blending equation is configured from DRM to DC interface by the following path:
When updating a
drm_plane_state
, DM callsamdgpu_dm_plane_fill_blending_from_plane_state()
that mapsdrm_plane_state
attributes todc_plane_info
struct to be handled in the OS-agnostic component (DC).On DC interface,
struct mpcc_blnd_cfg
programs the MPCC blend configuration considering thedc_plane_info
input from DPP.