Kernel driver ibm-cffps¶
Supported chips:
IBM Common Form Factor power supply
Author: Eddie James <eajames@us.ibm.com>
Description¶
This driver supports IBM Common Form Factor (CFF) power supplies. This driver is a client to the core PMBus driver.
Usage Notes¶
This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see How to instantiate I2C devices for details.
Sysfs entries¶
The following attributes are supported:
curr1_alarm |
Output current over-current alarm. |
curr1_input |
Measured output current in mA. |
curr1_label |
"iout1" |
fan1_alarm |
Fan 1 warning. |
fan1_fault |
Fan 1 fault. |
fan1_input |
Fan 1 speed in RPM. |
fan2_alarm |
Fan 2 warning. |
fan2_fault |
Fan 2 fault. |
fan2_input |
Fan 2 speed in RPM. |
in1_alarm |
Input voltage under-voltage alarm. |
in1_input |
Measured input voltage in mV. |
in1_label |
"vin" |
in2_alarm |
Output voltage over-voltage alarm. |
in2_input |
Measured output voltage in mV. |
in2_label |
"vout1" |
power1_alarm |
Input fault or alarm. |
power1_input |
Measured input power in uW. |
power1_label |
"pin" |
temp1_alarm |
PSU inlet ambient temperature over-temperature alarm. |
temp1_input |
Measured PSU inlet ambient temp in millidegrees C. |
temp2_alarm |
Secondary rectifier temp over-temperature alarm. |
temp2_input |
Measured secondary rectifier temp in millidegrees C. |
temp3_alarm |
ORing FET temperature over-temperature alarm. |
temp3_input |
Measured ORing FET temperature in millidegrees C. |