Email clients info for Linux


These days most developers use git send-email instead of regular email clients. The man page for this is quite good. On the receiving end, maintainers use git am to apply the patches.

If you are new to git then send your first patch to yourself. Save it as raw text including all the headers. Run git am raw_email.txt and then review the changelog with git log. When that works then send the patch to the appropriate mailing list(s).

General Preferences

Patches for the Linux kernel are submitted via email, preferably as inline text in the body of the email. Some maintainers accept attachments, but then the attachments should have content-type text/plain. However, attachments are generally frowned upon because it makes quoting portions of the patch more difficult in the patch review process.

It’s also strongly recommended that you use plain text in your email body, for patches and other emails alike. may be useful for information on how to configure your preferred email client, as well as listing recommended email clients should you not already have a preference.

Email clients that are used for Linux kernel patches should send the patch text untouched. For example, they should not modify or delete tabs or spaces, even at the beginning or end of lines.

Don’t send patches with format=flowed. This can cause unexpected and unwanted line breaks.

Don’t let your email client do automatic word wrapping for you. This can also corrupt your patch.

Email clients should not modify the character set encoding of the text. Emailed patches should be in ASCII or UTF-8 encoding only. If you configure your email client to send emails with UTF-8 encoding, you avoid some possible charset problems.

Email clients should generate and maintain “References:” or “In-Reply-To:” headers so that mail threading is not broken.

Copy-and-paste (or cut-and-paste) usually does not work for patches because tabs are converted to spaces. Using xclipboard, xclip, and/or xcutsel may work, but it’s best to test this for yourself or just avoid copy-and-paste.

Don’t use PGP/GPG signatures in mail that contains patches. This breaks many scripts that read and apply the patches. (This should be fixable.)

It’s a good idea to send a patch to yourself, save the received message, and successfully apply it with ‘patch’ before sending patches to Linux mailing lists.

Some email client (MUA) hints

Here are some specific MUA configuration hints for editing and sending patches for the Linux kernel. These are not meant to be complete software package configuration summaries.


  • TUI = text-based user interface

  • GUI = graphical user interface

Alpine (TUI)

Config options:

In the Sending Preferences section:

  • Do Not Send Flowed Text must be enabled

  • Strip Whitespace Before Sending must be disabled

When composing the message, the cursor should be placed where the patch should appear, and then pressing CTRL-R let you specify the patch file to insert into the message.

Claws Mail (GUI)

Works. Some people use this successfully for patches.

To insert a patch use Message‣Insert File (CTRL-I) or an external editor.

If the inserted patch has to be edited in the Claws composition window “Auto wrapping” in Configuration‣Preferences‣Compose‣Wrapping should be disabled.

Evolution (GUI)

Some people use this successfully for patches.

When composing mail select: Preformat

from Format‣Paragraph Style‣Preformatted (CTRL-7) or the toolbar

Then use: Insert‣Text File… (ALT-N x) to insert the patch.

You can also diff -Nru old.c new.c | xclip, select Preformat, then paste with the middle button.

Kmail (GUI)

Some people use Kmail successfully for patches.

The default setting of not composing in HTML is appropriate; do not enable it.

When composing an email, under options, uncheck “word wrap”. The only disadvantage is any text you type in the email will not be word-wrapped so you will have to manually word wrap text before the patch. The easiest way around this is to compose your email with word wrap enabled, then save it as a draft. Once you pull it up again from your drafts it is now hard word-wrapped and you can uncheck “word wrap” without losing the existing wrapping.

At the bottom of your email, put the commonly-used patch delimiter before inserting your patch: three hyphens (---).

Then from the Message menu item, select insert file and choose your patch. As an added bonus you can customise the message creation toolbar menu and put the insert file icon there.

Make the composer window wide enough so that no lines wrap. As of KMail 1.13.5 (KDE 4.5.4), KMail will apply word wrapping when sending the email if the lines wrap in the composer window. Having word wrapping disabled in the Options menu isn’t enough. Thus, if your patch has very long lines, you must make the composer window very wide before sending the email. See:

You can safely GPG sign attachments, but inlined text is preferred for patches so do not GPG sign them. Signing patches that have been inserted as inlined text will make them tricky to extract from their 7-bit encoding.

If you absolutely must send patches as attachments instead of inlining them as text, right click on the attachment and select properties, and highlight Suggest automatic display to make the attachment inlined to make it more viewable.

When saving patches that are sent as inlined text, select the email that contains the patch from the message list pane, right click and select save as. You can use the whole email unmodified as a patch if it was properly composed. Emails are saved as read-write for user only so you will have to chmod them to make them group and world readable if you copy them elsewhere.

Lotus Notes (GUI)

Run away from it.

IBM Verse (Web GUI)

See Lotus Notes.

Mutt (TUI)

Plenty of Linux developers use mutt, so it must work pretty well.

Mutt doesn’t come with an editor, so whatever editor you use should be used in a way that there are no automatic linebreaks. Most editors have an insert file option that inserts the contents of a file unaltered.

To use vim with mutt:

set editor="vi"

If using xclip, type the command:

:set paste

before middle button or shift-insert or use:

:r filename

if you want to include the patch inline. (a)ttach works fine without set paste.

You can also generate patches with git format-patch and then use Mutt to send them:

$ mutt -H 0001-some-bug-fix.patch

Config options:

It should work with default settings. However, it’s a good idea to set the send_charset to:

set send_charset="us-ascii:utf-8"

Mutt is highly customizable. Here is a minimum configuration to start using Mutt to send patches through Gmail:

# .muttrc
# ================  IMAP ====================
set imap_user = ''
set imap_pass = 'yourpassword'
set spoolfile = imaps://
set folder = imaps://
set record="imaps://[Gmail]/Sent Mail"
set postponed="imaps://[Gmail]/Drafts"
set mbox="imaps://[Gmail]/All Mail"

# ================  SMTP  ====================
set smtp_url = "smtp://"
set smtp_pass = $imap_pass
set ssl_force_tls = yes # Require encrypted connection

# ================  Composition  ====================
set editor = `echo \$EDITOR`
set edit_headers = yes  # See the headers when editing
set charset = UTF-8     # value of $LANG; also fallback for send_charset
# Sender, email address, and sign-off line must match
unset use_domain        # because joe@localhost is just embarrassing
set realname = "YOUR NAME"
set from = ""
set use_from = yes

The Mutt docs have lots more information:

Pine (TUI)

Pine has had some whitespace truncation issues in the past, but these should all be fixed now.

Use alpine (pine’s successor) if you can.

Config options:

  • quell-flowed-text is needed for recent versions

  • the no-strip-whitespace-before-send option is needed

Sylpheed (GUI)

  • Works well for inlining text (or using attachments).

  • Allows use of an external editor.

  • Is slow on large folders.

  • Won’t do TLS SMTP auth over a non-SSL connection.

  • Has a helpful ruler bar in the compose window.

  • Adding addresses to address book doesn’t understand the display name properly.

Thunderbird (GUI)

Thunderbird is an Outlook clone that likes to mangle text, but there are ways to coerce it into behaving.

After doing the modifications, this includes installing the extensions, you need to restart Thunderbird.

  • Allow use of an external editor:

    The easiest thing to do with Thunderbird and patches is to use extensions which open your favorite external editor.

    Here are some example extensions which are capable of doing this.

To beat some sense out of the internal editor, do this:

  • Edit your Thunderbird config settings so that it won’t use format=flowed! Go to your main window and find the button for your main dropdown menu. Main Menu‣Preferences‣General‣Config Editor… to bring up the thunderbird’s registry editor.

    • Set mailnews.send_plaintext_flowed to false

    • Set mailnews.wraplength from 72 to 0

  • Don’t write HTML messages! Go to the main window Main Menu‣Account Settings‣youracc@server.something‣Composition & Addressing! There you can disable the option “Compose messages in HTML format”.

  • Open messages only as plain text! Go to the main window Main Menu‣View‣Message Body As‣Plain Text!

TkRat (GUI)

Works. Use “Insert file…” or external editor.

Gmail (Web GUI)

Does not work for sending patches.

Gmail web client converts tabs to spaces automatically.

At the same time it wraps lines every 78 chars with CRLF style line breaks although tab2space problem can be solved with external editor.

Another problem is that Gmail will base64-encode any message that has a non-ASCII character. That includes things like European names.