Squashfs 4.0 Filesystem¶
Squashfs is a compressed read-only filesystem for Linux.
It uses zlib, lz4, lzo, or xz compression to compress files, inodes and directories. Inodes in the system are very small and all blocks are packed to minimise data overhead. Block sizes greater than 4K are supported up to a maximum of 1Mbytes (default block size 128K).
Squashfs is intended for general read-only filesystem use, for archival use (i.e. in cases where a .tar.gz file may be used), and in constrained block device/memory systems (e.g. embedded systems) where low overhead is needed.
Mailing list: firstname.lastname@example.org Web site: www.squashfs.org
1. Filesystem Features¶
Squashfs filesystem features versus Cramfs:
|Max filesystem size||2^64||256 MiB|
|Max file size||~ 2 TiB||16 MiB|
|Max entries per directory||unlimited||unlimited|
|Max block size||1 MiB||4 KiB|
|Sparse file support||yes||no|
|Tail-end packing (fragments)||yes||no|
|Exportable (NFS etc.)||yes||no|
|Hard link support||yes||no|
|“.” and “..” in readdir||yes||no|
|Real inode numbers||yes||no|
|File creation time||yes||no|
Squashfs compresses data, inodes and directories. In addition, inode and directory data are highly compacted, and packed on byte boundaries. Each compressed inode is on average 8 bytes in length (the exact length varies on file type, i.e. regular file, directory, symbolic link, and block/char device inodes have different sizes).
2. Using Squashfs¶
As squashfs is a read-only filesystem, the mksquashfs program must be used to create populated squashfs filesystems. This and other squashfs utilities can be obtained from http://www.squashfs.org. Usage instructions can be obtained from this site also.
- The squashfs-tools development tree is now located on kernel.org
3. Squashfs Filesystem Design¶
A squashfs filesystem consists of a maximum of nine parts, packed together on a byte alignment:
--------------- | superblock | |---------------| | compression | | options | |---------------| | datablocks | | & fragments | |---------------| | inode table | |---------------| | directory | | table | |---------------| | fragment | | table | |---------------| | export | | table | |---------------| | uid/gid | | lookup table | |---------------| | xattr | | table | ---------------
Compressed data blocks are written to the filesystem as files are read from the source directory, and checked for duplicates. Once all file data has been written the completed inode, directory, fragment, export, uid/gid lookup and xattr tables are written.
3.1 Compression options¶
Compressors can optionally support compression specific options (e.g. dictionary size). If non-default compression options have been used, then these are stored here.
Metadata (inodes and directories) are compressed in 8Kbyte blocks. Each compressed block is prefixed by a two byte length, the top bit is set if the block is uncompressed. A block will be uncompressed if the -noI option is set, or if the compressed block was larger than the uncompressed block.
Inodes are packed into the metadata blocks, and are not aligned to block boundaries, therefore inodes overlap compressed blocks. Inodes are identified by a 48-bit number which encodes the location of the compressed metadata block containing the inode, and the byte offset into that block where the inode is placed (<block, offset>).
To maximise compression there are different inodes for each file type (regular file, directory, device, etc.), the inode contents and length varying with the type.
To further maximise compression, two types of regular file inode and directory inode are defined: inodes optimised for frequently occurring regular files and directories, and extended types where extra information has to be stored.
Like inodes, directories are packed into compressed metadata blocks, stored in a directory table. Directories are accessed using the start address of the metablock containing the directory and the offset into the decompressed block (<block, offset>).
Directories are organised in a slightly complex way, and are not simply a list of file names. The organisation takes advantage of the fact that (in most cases) the inodes of the files will be in the same compressed metadata block, and therefore, can share the start block. Directories are therefore organised in a two level list, a directory header containing the shared start block value, and a sequence of directory entries, each of which share the shared start block. A new directory header is written once/if the inode start block changes. The directory header/directory entry list is repeated as many times as necessary.
Directories are sorted, and can contain a directory index to speed up file lookup. Directory indexes store one entry per metablock, each entry storing the index/filename mapping to the first directory header in each metadata block. Directories are sorted in alphabetical order, and at lookup the index is scanned linearly looking for the first filename alphabetically larger than the filename being looked up. At this point the location of the metadata block the filename is in has been found. The general idea of the index is to ensure only one metadata block needs to be decompressed to do a lookup irrespective of the length of the directory. This scheme has the advantage that it doesn’t require extra memory overhead and doesn’t require much extra storage on disk.
3.4 File data¶
Regular files consist of a sequence of contiguous compressed blocks, and/or a compressed fragment block (tail-end packed block). The compressed size of each datablock is stored in a block list contained within the file inode.
To speed up access to datablocks when reading ‘large’ files (256 Mbytes or larger), the code implements an index cache that caches the mapping from block index to datablock location on disk.
The index cache allows Squashfs to handle large files (up to 1.75 TiB) while retaining a simple and space-efficient block list on disk. The cache is split into slots, caching up to eight 224 GiB files (128 KiB blocks). Larger files use multiple slots, with 1.75 TiB files using all 8 slots. The index cache is designed to be memory efficient, and by default uses 16 KiB.
3.5 Fragment lookup table¶
Regular files can contain a fragment index which is mapped to a fragment location on disk and compressed size using a fragment lookup table. This fragment lookup table is itself stored compressed into metadata blocks. A second index table is used to locate these. This second index table for speed of access (and because it is small) is read at mount time and cached in memory.
3.6 Uid/gid lookup table¶
For space efficiency regular files store uid and gid indexes, which are converted to 32-bit uids/gids using an id look up table. This table is stored compressed into metadata blocks. A second index table is used to locate these. This second index table for speed of access (and because it is small) is read at mount time and cached in memory.
3.7 Export table¶
To enable Squashfs filesystems to be exportable (via NFS etc.) filesystems can optionally (disabled with the -no-exports Mksquashfs option) contain an inode number to inode disk location lookup table. This is required to enable Squashfs to map inode numbers passed in filehandles to the inode location on disk, which is necessary when the export code reinstantiates expired/flushed inodes.
This table is stored compressed into metadata blocks. A second index table is used to locate these. This second index table for speed of access (and because it is small) is read at mount time and cached in memory.
3.8 Xattr table¶
The xattr table contains extended attributes for each inode. The xattrs for each inode are stored in a list, each list entry containing a type, name and value field. The type field encodes the xattr prefix (“user.”, “trusted.” etc) and it also encodes how the name/value fields should be interpreted. Currently the type indicates whether the value is stored inline (in which case the value field contains the xattr value), or if it is stored out of line (in which case the value field stores a reference to where the actual value is stored). This allows large values to be stored out of line improving scanning and lookup performance and it also allows values to be de-duplicated, the value being stored once, and all other occurrences holding an out of line reference to that value.
The xattr lists are packed into compressed 8K metadata blocks. To reduce overhead in inodes, rather than storing the on-disk location of the xattr list inside each inode, a 32-bit xattr id is stored. This xattr id is mapped into the location of the xattr list using a second xattr id lookup table.
4. TODOs and Outstanding Issues¶
4.1 TODO list¶
Implement ACL support.
4.2 Squashfs Internal Cache¶
Blocks in Squashfs are compressed. To avoid repeatedly decompressing recently accessed data Squashfs uses two small metadata and fragment caches.
The cache is not used for file datablocks, these are decompressed and cached in the page-cache in the normal way. The cache is used to temporarily cache fragment and metadata blocks which have been read as a result of a metadata (i.e. inode or directory) or fragment access. Because metadata and fragments are packed together into blocks (to gain greater compression) the read of a particular piece of metadata or fragment will retrieve other metadata/fragments which have been packed with it, these because of locality-of-reference may be read in the near future. Temporarily caching them ensures they are available for near future access without requiring an additional read and decompress.
In the future this internal cache may be replaced with an implementation which uses the kernel page cache. Because the page cache operates on page sized units this may introduce additional complexity in terms of locking and associated race conditions.