7.40. ioctl VIDIOC_G_SLICED_VBI_CAP¶
VIDIOC_G_SLICED_VBI_CAP - Query sliced VBI capabilities
To find out which data services are supported by a sliced VBI capture or
output device, applications initialize the
type field of a struct
v4l2_sliced_vbi_cap, clear the
reserved array and call the VIDIOC_G_SLICED_VBI_CAP ioctl. The
driver fills in the remaining fields or returns an
EINVAL error code if
the sliced VBI API is unsupported or
type is invalid.
type field was added, and the ioctl changed from read-only
to write-read, in Linux 2.6.19.
A set of all data services supported by the driver.
Equal to the union of all elements of the
||Each element of this array contains a set of data services the hardware can look for or insert into a particular scan line. Data services are defined in Sliced VBI services. Array indices map to ITU-R line numbers as follows:|
|Element||525 line systems||625 line systems|
|The number of VBI lines the hardware can capture or output per frame, or the number of services it can identify on a given line may be limited. For example on PAL line 16 the hardware may be able to look for a VPS or Teletext signal, but not both at the same time. Applications can learn about these limits using the VIDIOC_S_FMT ioctl as described in Sliced VBI Data Interface.|
| Drivers must set
||Type of the data stream, see
This array is reserved for future extensions.
Applications and drivers must set it to zero.
|||See also Figure 4.2. ITU-R 525 line numbering (M/NTSC and M/PAL) and Figure 4.3. ITU-R 625 line numbering.|
||0x0001||PAL/SECAM line 7-22, 320-335 (second field 7-22)||Last 42 of the 45 byte Teletext packet, that is without clock run-in and framing code, lsb first transmitted.|
||0x0400||ETS 300 231||PAL line 16||Byte number 3 to 15 according to Figure 9 of ETS 300 231, lsb first transmitted.|
||0x1000||CEA 608-E||NTSC line 21, 284 (second field 21)||Two bytes in transmission order, including parity bit, lsb first transmitted.|
||0x4000||PAL/SECAM line 23||
Byte 0 1 msb lsb msb lsb Bit 7 6 5 4 3 2 1 0 x x 13 12 11 10 9
||0x1000||Set of services applicable to 525 line systems.|
||0x4401||Set of services applicable to 625 line systems.|