========================= Kernel Mode Setting (KMS) ========================= Drivers must initialize the mode setting core by calling :c:func:`drm_mode_config_init()` on the DRM device. The function initializes the :c:type:`struct drm_device ` mode_config field and never fails. Once done, mode configuration must be setup by initializing the following fields. - int min_width, min_height; int max_width, max_height; Minimum and maximum width and height of the frame buffers in pixel units. - struct drm_mode_config_funcs \*funcs; Mode setting functions. Overview ======== .. kernel-render:: DOT :alt: KMS Display Pipeline :caption: KMS Display Pipeline Overview digraph "KMS" { node [shape=box] subgraph cluster_static { style=dashed label="Static Objects" node [bgcolor=grey style=filled] "drm_plane A" -> "drm_crtc" "drm_plane B" -> "drm_crtc" "drm_crtc" -> "drm_encoder A" "drm_crtc" -> "drm_encoder B" } subgraph cluster_user_created { style=dashed label="Userspace-Created" node [shape=oval] "drm_framebuffer 1" -> "drm_plane A" "drm_framebuffer 2" -> "drm_plane B" } subgraph cluster_connector { style=dashed label="Hotpluggable" "drm_encoder A" -> "drm_connector A" "drm_encoder B" -> "drm_connector B" } } The basic object structure KMS presents to userspace is fairly simple. Framebuffers (represented by :c:type:`struct drm_framebuffer `, see `Frame Buffer Abstraction`_) feed into planes. Planes are represented by :c:type:`struct drm_plane `, see `Plane Abstraction`_ for more details. One or more (or even no) planes feed their pixel data into a CRTC (represented by :c:type:`struct drm_crtc `, see `CRTC Abstraction`_) for blending. The precise blending step is explained in more detail in `Plane Composition Properties`_ and related chapters. For the output routing the first step is encoders (represented by :c:type:`struct drm_encoder `, see `Encoder Abstraction`_). Those are really just internal artifacts of the helper libraries used to implement KMS drivers. Besides that they make it unecessarily more complicated for userspace to figure out which connections between a CRTC and a connector are possible, and what kind of cloning is supported, they serve no purpose in the userspace API. Unfortunately encoders have been exposed to userspace, hence can't remove them at this point. Futhermore the exposed restrictions are often wrongly set by drivers, and in many cases not powerful enough to express the real restrictions. A CRTC can be connected to multiple encoders, and for an active CRTC there must be at least one encoder. The final, and real, endpoint in the display chain is the connector (represented by :c:type:`struct drm_connector `, see `Connector Abstraction`_). Connectors can have different possible encoders, but the kernel driver selects which encoder to use for each connector. The use case is DVI, which could switch between an analog and a digital encoder. Encoders can also drive multiple different connectors. There is exactly one active connector for every active encoder. Internally the output pipeline is a bit more complex and matches today's hardware more closely: .. kernel-render:: DOT :alt: KMS Output Pipeline :caption: KMS Output Pipeline digraph "Output Pipeline" { node [shape=box] subgraph { "drm_crtc" [bgcolor=grey style=filled] } subgraph cluster_internal { style=dashed label="Internal Pipeline" { node [bgcolor=grey style=filled] "drm_encoder A"; "drm_encoder B"; "drm_encoder C"; } { node [bgcolor=grey style=filled] "drm_encoder B" -> "drm_bridge B" "drm_encoder C" -> "drm_bridge C1" "drm_bridge C1" -> "drm_bridge C2"; } } "drm_crtc" -> "drm_encoder A" "drm_crtc" -> "drm_encoder B" "drm_crtc" -> "drm_encoder C" subgraph cluster_output { style=dashed label="Outputs" "drm_encoder A" -> "drm_connector A"; "drm_bridge B" -> "drm_connector B"; "drm_bridge C2" -> "drm_connector C"; "drm_panel" } } Internally two additional helper objects come into play. First, to be able to share code for encoders (sometimes on the same SoC, sometimes off-chip) one or more :ref:`drm_bridges` (represented by :c:type:`struct drm_bridge `) can be linked to an encoder. This link is static and cannot be changed, which means the cross-bar (if there is any) needs to be mapped between the CRTC and any encoders. Often for drivers with bridges there's no code left at the encoder level. Atomic drivers can leave out all the encoder callbacks to essentially only leave a dummy routing object behind, which is needed for backwards compatibility since encoders are exposed to userspace. The second object is for panels, represented by :c:type:`struct drm_panel `, see :ref:`drm_panel_helper`. Panels do not have a fixed binding point, but are generally linked to the driver private structure that embeds :c:type:`struct drm_connector `. Note that currently the bridge chaining and interactions with connectors and panels are still in-flux and not really fully sorted out yet. KMS Core Structures and Functions ================================= .. kernel-doc:: include/drm/drm_mode_config.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_mode_config.c :export: Modeset Base Object Abstraction =============================== .. kernel-render:: DOT :alt: Mode Objects and Properties :caption: Mode Objects and Properties digraph { node [shape=box] "drm_property A" -> "drm_mode_object A" "drm_property A" -> "drm_mode_object B" "drm_property B" -> "drm_mode_object A" } The base structure for all KMS objects is :c:type:`struct drm_mode_object `. One of the base services it provides is tracking properties, which are especially important for the atomic IOCTL (see `Atomic Mode Setting`_). The somewhat surprising part here is that properties are not directly instantiated on each object, but free-standing mode objects themselves, represented by :c:type:`struct drm_property `, which only specify the type and value range of a property. Any given property can be attached multiple times to different objects using :c:func:`drm_object_attach_property() `. .. kernel-doc:: include/drm/drm_mode_object.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_mode_object.c :export: Atomic Mode Setting =================== .. kernel-render:: DOT :alt: Mode Objects and Properties :caption: Mode Objects and Properties digraph { node [shape=box] subgraph cluster_state { style=dashed label="Free-standing state" "drm_atomic_state" -> "duplicated drm_plane_state A" "drm_atomic_state" -> "duplicated drm_plane_state B" "drm_atomic_state" -> "duplicated drm_crtc_state" "drm_atomic_state" -> "duplicated drm_connector_state" "drm_atomic_state" -> "duplicated driver private state" } subgraph cluster_current { style=dashed label="Current state" "drm_device" -> "drm_plane A" "drm_device" -> "drm_plane B" "drm_device" -> "drm_crtc" "drm_device" -> "drm_connector" "drm_device" -> "driver private object" "drm_plane A" -> "drm_plane_state A" "drm_plane B" -> "drm_plane_state B" "drm_crtc" -> "drm_crtc_state" "drm_connector" -> "drm_connector_state" "driver private object" -> "driver private state" } "drm_atomic_state" -> "drm_device" [label="atomic_commit"] "duplicated drm_plane_state A" -> "drm_device"[style=invis] } Atomic provides transactional modeset (including planes) updates, but a bit differently from the usual transactional approach of try-commit and rollback: - Firstly, no hardware changes are allowed when the commit would fail. This allows us to implement the DRM_MODE_ATOMIC_TEST_ONLY mode, which allows userspace to explore whether certain configurations would work or not. - This would still allow setting and rollback of just the software state, simplifying conversion of existing drivers. But auditing drivers for correctness of the atomic_check code becomes really hard with that: Rolling back changes in data structures all over the place is hard to get right. - Lastly, for backwards compatibility and to support all use-cases, atomic updates need to be incremental and be able to execute in parallel. Hardware doesn't always allow it, but where possible plane updates on different CRTCs should not interfere, and not get stalled due to output routing changing on different CRTCs. Taken all together there's two consequences for the atomic design: - The overall state is split up into per-object state structures: :c:type:`struct drm_plane_state ` for planes, :c:type:`struct drm_crtc_state ` for CRTCs and :c:type:`struct drm_connector_state ` for connectors. These are the only objects with userspace-visible and settable state. For internal state drivers can subclass these structures through embeddeding, or add entirely new state structures for their globally shared hardware functions. - An atomic update is assembled and validated as an entirely free-standing pile of structures within the :c:type:`drm_atomic_state ` container. Driver private state structures are also tracked in the same structure; see the next chapter. Only when a state is committed is it applied to the driver and modeset objects. This way rolling back an update boils down to releasing memory and unreferencing objects like framebuffers. Read on in this chapter, and also in :ref:`drm_atomic_helper` for more detailed coverage of specific topics. Handling Driver Private State ----------------------------- .. kernel-doc:: drivers/gpu/drm/drm_atomic.c :doc: handling driver private state Atomic Mode Setting Function Reference -------------------------------------- .. kernel-doc:: include/drm/drm_atomic.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_atomic.c :export: Atomic Mode Setting IOCTL and UAPI Functions -------------------------------------------- .. kernel-doc:: drivers/gpu/drm/drm_atomic_uapi.c :doc: overview .. kernel-doc:: drivers/gpu/drm/drm_atomic_uapi.c :export: CRTC Abstraction ================ .. kernel-doc:: drivers/gpu/drm/drm_crtc.c :doc: overview CRTC Functions Reference -------------------------------- .. kernel-doc:: include/drm/drm_crtc.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_crtc.c :export: Frame Buffer Abstraction ======================== .. kernel-doc:: drivers/gpu/drm/drm_framebuffer.c :doc: overview Frame Buffer Functions Reference -------------------------------- .. kernel-doc:: include/drm/drm_framebuffer.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_framebuffer.c :export: DRM Format Handling =================== .. kernel-doc:: include/uapi/drm/drm_fourcc.h :doc: overview Format Functions Reference -------------------------- .. kernel-doc:: include/drm/drm_fourcc.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_fourcc.c :export: Dumb Buffer Objects =================== .. kernel-doc:: drivers/gpu/drm/drm_dumb_buffers.c :doc: overview Plane Abstraction ================= .. kernel-doc:: drivers/gpu/drm/drm_plane.c :doc: overview Plane Functions Reference ------------------------- .. kernel-doc:: include/drm/drm_plane.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_plane.c :export: Display Modes Function Reference ================================ .. kernel-doc:: include/drm/drm_modes.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_modes.c :export: Connector Abstraction ===================== .. kernel-doc:: drivers/gpu/drm/drm_connector.c :doc: overview Connector Functions Reference ----------------------------- .. kernel-doc:: include/drm/drm_connector.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_connector.c :export: Writeback Connectors -------------------- .. kernel-doc:: drivers/gpu/drm/drm_writeback.c :doc: overview .. kernel-doc:: drivers/gpu/drm/drm_writeback.c :export: Encoder Abstraction =================== .. kernel-doc:: drivers/gpu/drm/drm_encoder.c :doc: overview Encoder Functions Reference --------------------------- .. kernel-doc:: include/drm/drm_encoder.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_encoder.c :export: KMS Locking =========== .. kernel-doc:: drivers/gpu/drm/drm_modeset_lock.c :doc: kms locking .. kernel-doc:: include/drm/drm_modeset_lock.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_modeset_lock.c :export: KMS Properties ============== Property Types and Blob Property Support ---------------------------------------- .. kernel-doc:: drivers/gpu/drm/drm_property.c :doc: overview .. kernel-doc:: include/drm/drm_property.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_property.c :export: Standard Connector Properties ----------------------------- .. kernel-doc:: drivers/gpu/drm/drm_connector.c :doc: standard connector properties HDMI Specific Connector Properties ---------------------------------- .. kernel-doc:: drivers/gpu/drm/drm_connector.c :doc: HDMI connector properties Plane Composition Properties ---------------------------- .. kernel-doc:: drivers/gpu/drm/drm_blend.c :doc: overview .. kernel-doc:: drivers/gpu/drm/drm_blend.c :export: FB_DAMAGE_CLIPS ~~~~~~~~~~~~~~~ .. kernel-doc:: drivers/gpu/drm/drm_damage_helper.c :doc: overview .. kernel-doc:: drivers/gpu/drm/drm_damage_helper.c :export: .. kernel-doc:: include/drm/drm_damage_helper.h :internal: Color Management Properties --------------------------- .. kernel-doc:: drivers/gpu/drm/drm_color_mgmt.c :doc: overview .. kernel-doc:: drivers/gpu/drm/drm_color_mgmt.c :export: Tile Group Property ------------------- .. kernel-doc:: drivers/gpu/drm/drm_connector.c :doc: Tile group Explicit Fencing Properties --------------------------- .. kernel-doc:: drivers/gpu/drm/drm_atomic_uapi.c :doc: explicit fencing properties Variable Refresh Properties --------------------------- .. kernel-doc:: drivers/gpu/drm/drm_connector.c :doc: Variable refresh properties Existing KMS Properties ----------------------- The following table gives description of drm properties exposed by various modules/drivers. Because this table is very unwieldy, do not add any new properties here. Instead document them in a section above. .. csv-table:: :header-rows: 1 :file: kms-properties.csv Vertical Blanking ================= .. kernel-doc:: drivers/gpu/drm/drm_vblank.c :doc: vblank handling Vertical Blanking and Interrupt Handling Functions Reference ------------------------------------------------------------ .. kernel-doc:: include/drm/drm_vblank.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_vblank.c :export: