========================= Kernel driver i2c-sis5595 ========================= Authors: - Frodo Looijaard , - Mark D. Studebaker , - Philip Edelbrock Supported adapters: * Silicon Integrated Systems Corp. SiS5595 Southbridge Datasheet: Publicly available at the Silicon Integrated Systems Corp. site. Note: all have mfr. ID 0x1039. ========= ====== SUPPORTED PCI ID ========= ====== 5595 0008 ========= ====== Note: these chips contain a 0008 device which is incompatible with the 5595. We recognize these by the presence of the listed "blacklist" PCI ID and refuse to load. ============= ====== ================ NOT SUPPORTED PCI ID BLACKLIST PCI ID ============= ====== ================ 540 0008 0540 550 0008 0550 5513 0008 5511 5581 0008 5597 5582 0008 5597 5597 0008 5597 5598 0008 5597/5598 630 0008 0630 645 0008 0645 646 0008 0646 648 0008 0648 650 0008 0650 651 0008 0651 730 0008 0730 735 0008 0735 745 0008 0745 746 0008 0746 ============= ====== ================ Module Parameters ----------------- ================== ===================================================== force_addr=0xaddr Set the I/O base address. Useful for boards that don't set the address in the BIOS. Does not do a PCI force; the device must still be present in lspci. Don't use this unless the driver complains that the base address is not set. ================== ===================================================== Description ----------- i2c-sis5595 is a true SMBus host driver for motherboards with the SiS5595 southbridges. WARNING: If you are trying to access the integrated sensors on the SiS5595 chip, you want the sis5595 driver for those, not this driver. This driver is a BUS driver, not a CHIP driver. A BUS driver is used by other CHIP drivers to access chips on the bus.