.. SPDX-License-Identifier: GPL-2.0 Opera firmware ============== Author: Marco Gittler To extract the firmware for the Opera DVB-S1 USB-Box you need to copy the files: 2830SCap2.sys 2830SLoad2.sys from the windriver disk into this directory. Then run: .. code-block:: none scripts/get_dvb_firmware opera1 and after that you have 2 files: dvb-usb-opera-01.fw dvb-usb-opera1-fpga-01.fw in here. Copy them into /lib/firmware/ . After that the driver can load the firmware (if you have enabled firmware loading in kernel config and have hotplug running).