.. SPDX-License-Identifier: GPL-2.0 Firmware files for lmedm04 cards ================================ To extract firmware for the DM04/QQBOX you need to copy the following file(s) to this directory. For DM04+/QQBOX LME2510C (Sharp 7395 Tuner) ------------------------------------------- The Sharp 7395 driver can be found in windows/system32/drivers US2A0D.sys (dated 17 Mar 2009) and run: .. code-block:: none scripts/get_dvb_firmware lme2510c_s7395 will produce dvb-usb-lme2510c-s7395.fw An alternative but older firmware can be found on the driver disk DVB-S_EN_3.5A in BDADriver/driver LMEBDA_DVBS7395C.sys (dated 18 Jan 2008) and run: .. code-block:: none ./get_dvb_firmware lme2510c_s7395_old will produce dvb-usb-lme2510c-s7395.fw The LG firmware can be found on the driver disk DM04+_5.1A[LG] in BDADriver/driver For DM04 LME2510 (LG Tuner) --------------------------- LMEBDA_DVBS.sys (dated 13 Nov 2007) and run: .. code-block:: none ./get_dvb_firmware lme2510_lg will produce dvb-usb-lme2510-lg.fw Other LG firmware can be extracted manually from US280D.sys only found in windows/system32/drivers dd if=US280D.sys ibs=1 skip=42360 count=3924 of=dvb-usb-lme2510-lg.fw For DM04 LME2510C (LG Tuner) ---------------------------- .. code-block:: none dd if=US280D.sys ibs=1 skip=35200 count=3850 of=dvb-usb-lme2510c-lg.fw The Sharp 0194 tuner driver can be found in windows/system32/drivers US290D.sys (dated 09 Apr 2009) For LME2510 ----------- .. code-block:: none dd if=US290D.sys ibs=1 skip=36856 count=3976 of=dvb-usb-lme2510-s0194.fw For LME2510C ------------ .. code-block:: none dd if=US290D.sys ibs=1 skip=33152 count=3697 of=dvb-usb-lme2510c-s0194.fw The m88rs2000 tuner driver can be found in windows/system32/drivers US2B0D.sys (dated 29 Jun 2010) .. code-block:: none dd if=US2B0D.sys ibs=1 skip=34432 count=3871 of=dvb-usb-lme2510c-rs2000.fw We need to modify id of rs2000 firmware or it will warm boot id 3344:1120. .. code-block:: none echo -ne \\xF0\\x22 | dd conv=notrunc bs=1 count=2 seek=266 of=dvb-usb-lme2510c-rs2000.fw Copy the firmware file(s) to /lib/firmware