The saa7134 driver ================== Author Gerd Hoffmann This is a v4l2/oss device driver for saa7130/33/34/35 based capture / TV boards. See http://www.semiconductors.philips.com/pip/saa7134hl for a description. Status ------ Almost everything is working. video, sound, tuner, radio, mpeg ts, ... As with bttv, card-specific tweaks are needed. Check CARDLIST for a list of known TV cards and saa7134-cards.c for the drivers card configuration info. Build ----- Pick up videodev + v4l2 patches from http://bytesex.org/patches/. Configure, build, install + boot the new kernel. You'll need at least these config options: .. code-block:: none CONFIG_I2C=m CONFIG_VIDEO_DEV=m Type "make" to build the driver now. "make install" installs the driver. "modprobe saa7134" should load it. Depending on the card you might have to pass card= as insmod option, check CARDLIST for valid choices. Changes / Fixes --------------- Please mail me unified diffs ("diff -u") with your changes, and don't forget to tell me what it changes / which problem it fixes / whatever it is good for ... Known Problems -------------- * The tuner for the flyvideos isn't detected automatically and the default might not work for you depending on which version you have. There is a tuner= insmod option to override the driver's default. Card Variations: ---------------- Cards can use either of these two crystals (xtal): - 32.11 MHz -> .audio_clock=0x187de7 - 24.576MHz -> .audio_clock=0x200000 (xtal * .audio_clock = 51539600) Some details about 30/34/35: - saa7130 - low-price chip, doesn't have mute, that is why all those cards should have .mute field defined in their tuner structure. - saa7134 - usual chip - saa7133/35 - saa7135 is probably a marketing decision, since all those chips identifies itself as 33 on pci. LifeView GPIOs -------------- This section was authored by: Peter Missel - LifeView FlyTV Platinum FM (LR214WF) - GP27 MDT2005 PB4 pin 10 - GP26 MDT2005 PB3 pin 9 - GP25 MDT2005 PB2 pin 8 - GP23 MDT2005 PB1 pin 7 - GP22 MDT2005 PB0 pin 6 - GP21 MDT2005 PB5 pin 11 - GP20 MDT2005 PB6 pin 12 - GP19 MDT2005 PB7 pin 13 - nc MDT2005 PA3 pin 2 - Remote MDT2005 PA2 pin 1 - GP18 MDT2005 PA1 pin 18 - nc MDT2005 PA0 pin 17 strap low - GP17 Strap "GP7"=High - GP16 Strap "GP6"=High - 0=Radio 1=TV - Drives SA630D ENCH1 and HEF4052 A1 pinsto do FM radio through SIF input - GP15 nc - GP14 nc - GP13 nc - GP12 Strap "GP5" = High - GP11 Strap "GP4" = High - GP10 Strap "GP3" = High - GP09 Strap "GP2" = Low - GP08 Strap "GP1" = Low - GP07.00 nc Credits ------- andrew.stevens@philips.com + werner.leeb@philips.com for providing saa7134 hardware specs and sample board.