7.52. ioctl VIDIOC_REQBUFS

7.52.1. Name

VIDIOC_REQBUFS - Initiate Memory Mapping, User Pointer I/O or DMA buffer I/O

7.52.2. Synopsis

int ioctl(int fd, VIDIOC_REQBUFS, struct v4l2_requestbuffers *argp)

7.52.3. Arguments

fd
File descriptor returned by open().
argp
Pointer to struct v4l2_requestbuffers.

7.52.4. Description

This ioctl is used to initiate memory mapped, user pointer or DMABUF based I/O. Memory mapped buffers are located in device memory and must be allocated with this ioctl before they can be mapped into the application’s address space. User buffers are allocated by applications themselves, and this ioctl is merely used to switch the driver into user pointer I/O mode and to setup some internal structures. Similarly, DMABUF buffers are allocated by applications through a device driver, and this ioctl only configures the driver into DMABUF I/O mode without performing any direct allocation.

To allocate device buffers applications initialize all fields of the struct v4l2_requestbuffers structure. They set the type field to the respective stream or buffer type, the count field to the desired number of buffers, memory must be set to the requested I/O method and the reserved array must be zeroed. When the ioctl is called with a pointer to this structure the driver will attempt to allocate the requested number of buffers and it stores the actual number allocated in the count field. It can be smaller than the number requested, even zero, when the driver runs out of free memory. A larger number is also possible when the driver requires more buffers to function correctly. For example video output requires at least two buffers, one displayed and one filled by the application.

When the I/O method is not supported the ioctl returns an EINVAL error code.

Applications can call ioctl VIDIOC_REQBUFS again to change the number of buffers, however this cannot succeed when any buffers are still mapped. A count value of zero frees all buffers, after aborting or finishing any DMA in progress, an implicit VIDIOC_STREAMOFF.

v4l2_requestbuffers
struct v4l2_requestbuffers
__u32 count The number of buffers requested or granted.
__u32 type Type of the stream or buffers, this is the same as the struct v4l2_format type field. See v4l2_buf_type for valid values.
__u32 memory Applications set this field to V4L2_MEMORY_MMAP, V4L2_MEMORY_DMABUF or V4L2_MEMORY_USERPTR. See v4l2_memory.
__u32 reserved[2] A place holder for future extensions. Drivers and applications must set the array to zero.

7.52.5. Return Value

On success 0 is returned, on error -1 and the errno variable is set appropriately. The generic error codes are described at the Generic Error Codes chapter.

EINVAL
The buffer type (type field) or the requested I/O method (memory) is not supported.