1.6. Tuners and Modulators

1.6.1. Tuners

Video input devices can have one or more tuners demodulating a RF signal. Each tuner is associated with one or more video inputs, depending on the number of RF connectors on the tuner. The type field of the respective struct v4l2_input returned by the ioctl VIDIOC_ENUMINPUT ioctl is set to V4L2_INPUT_TYPE_TUNER and its tuner field contains the index number of the tuner.

Radio input devices have exactly one tuner with index zero, no video inputs.

To query and change tuner properties applications use the VIDIOC_G_TUNER and VIDIOC_S_TUNER ioctls, respectively. The struct v4l2_tuner returned by VIDIOC_G_TUNER also contains signal status information applicable when the tuner of the current video or radio input is queried.

Note

VIDIOC_S_TUNER does not switch the current tuner, when there is more than one at all. The tuner is solely determined by the current video input. Drivers must support both ioctls and set the V4L2_CAP_TUNER flag in the struct v4l2_capability returned by the ioctl VIDIOC_QUERYCAP ioctl when the device has one or more tuners.

1.6.2. Modulators

Video output devices can have one or more modulators, uh, modulating a video signal for radiation or connection to the antenna input of a TV set or video recorder. Each modulator is associated with one or more video outputs, depending on the number of RF connectors on the modulator. The type field of the respective struct v4l2_output returned by the ioctl VIDIOC_ENUMOUTPUT ioctl is set to V4L2_OUTPUT_TYPE_MODULATOR and its modulator field contains the index number of the modulator.

Radio output devices have exactly one modulator with index zero, no video outputs.

A video or radio device cannot support both a tuner and a modulator. Two separate device nodes will have to be used for such hardware, one that supports the tuner functionality and one that supports the modulator functionality. The reason is a limitation with the VIDIOC_S_FREQUENCY ioctl where you cannot specify whether the frequency is for a tuner or a modulator.

To query and change modulator properties applications use the VIDIOC_G_MODULATOR and VIDIOC_S_MODULATOR ioctl. Note that VIDIOC_S_MODULATOR does not switch the current modulator, when there is more than one at all. The modulator is solely determined by the current video output. Drivers must support both ioctls and set the V4L2_CAP_MODULATOR flag in the struct v4l2_capability returned by the ioctl VIDIOC_QUERYCAP ioctl when the device has one or more modulators.

1.6.3. Radio Frequency

To get and set the tuner or modulator radio frequency applications use the VIDIOC_G_FREQUENCY and VIDIOC_S_FREQUENCY ioctl which both take a pointer to a struct v4l2_frequency. These ioctls are used for TV and radio devices alike. Drivers must support both ioctls when the tuner or modulator ioctls are supported, or when the device is a radio device.