3.6. Buffers

A buffer contains data exchanged by application and driver using one of the Streaming I/O methods. In the multi-planar API, the data is held in planes, while the buffer structure acts as a container for the planes. Only pointers to buffers (planes) are exchanged, the data itself is not copied. These pointers, together with meta-information like timestamps or field parity, are stored in a struct v4l2_buffer, argument to the ioctl VIDIOC_QUERYBUF, ioctl VIDIOC_QBUF, VIDIOC_DQBUF and VIDIOC_DQBUF ioctl. In the multi-planar API, some plane-specific members of struct v4l2_buffer, such as pointers and sizes for each plane, are stored in struct struct v4l2_plane instead. In that case, struct struct v4l2_buffer contains an array of plane structures.

Dequeued video buffers come with timestamps. The driver decides at which part of the frame and with which clock the timestamp is taken. Please see flags in the masks V4L2_BUF_FLAG_TIMESTAMP_MASK and V4L2_BUF_FLAG_TSTAMP_SRC_MASK in Buffer Flags. These flags are always valid and constant across all buffers during the whole video stream. Changes in these flags may take place as a side effect of VIDIOC_S_INPUT or VIDIOC_S_OUTPUT however. The V4L2_BUF_FLAG_TIMESTAMP_COPY timestamp type which is used by e.g. on mem-to-mem devices is an exception to the rule: the timestamp source flags are copied from the OUTPUT video buffer to the CAPTURE video buffer.

v4l2_buffer

3.6.1. struct v4l2_buffer

struct v4l2_buffer
__u32 index   Number of the buffer, set by the application except when calling VIDIOC_DQBUF, then it is set by the driver. This field can range from zero to the number of buffers allocated with the ioctl VIDIOC_REQBUFS ioctl (struct v4l2_requestbuffers count), plus any buffers allocated with ioctl VIDIOC_CREATE_BUFS minus one.
__u32 type   Type of the buffer, same as struct v4l2_format type or struct v4l2_requestbuffers type, set by the application. See v4l2_buf_type
__u32 bytesused   The number of bytes occupied by the data in the buffer. It depends on the negotiated data format and may change with each buffer for compressed variable size data like JPEG images. Drivers must set this field when type refers to a capture stream, applications when it refers to an output stream. If the application sets this to 0 for an output stream, then bytesused will be set to the size of the buffer (see the length field of this struct) by the driver. For multiplanar formats this field is ignored and the planes pointer is used instead.
__u32 flags   Flags set by the application or driver, see Buffer Flags.
__u32 field   Indicates the field order of the image in the buffer, see v4l2_field. This field is not used when the buffer contains VBI data. Drivers must set it when type refers to a capture stream, applications when it refers to an output stream.
struct timeval timestamp   For capture streams this is time when the first data byte was captured, as returned by the clock_gettime() function for the relevant clock id; see V4L2_BUF_FLAG_TIMESTAMP_* in Buffer Flags. For output streams the driver stores the time at which the last data byte was actually sent out in the timestamp field. This permits applications to monitor the drift between the video and system clock. For output streams that use V4L2_BUF_FLAG_TIMESTAMP_COPY the application has to fill in the timestamp which will be copied by the driver to the capture stream.
struct v4l2_timecode timecode   When type is V4L2_BUF_TYPE_VIDEO_CAPTURE and the V4L2_BUF_FLAG_TIMECODE flag is set in flags, this structure contains a frame timecode. In V4L2_FIELD_ALTERNATE mode the top and bottom field contain the same timecode. Timecodes are intended to help video editing and are typically recorded on video tapes, but also embedded in compressed formats like MPEG. This field is independent of the timestamp and sequence fields.
__u32 sequence   Set by the driver, counting the frames (not fields!) in sequence. This field is set for both input and output devices.

In V4L2_FIELD_ALTERNATE mode the top and bottom field have the same sequence number. The count starts at zero and includes dropped or repeated frames. A dropped frame was received by an input device but could not be stored due to lack of free buffer space. A repeated frame was displayed again by an output device because the application did not pass new data in time.

Note

This may count the frames received e.g. over USB, without taking into account the frames dropped by the remote hardware due to limited compression throughput or bus bandwidth. These devices identify by not enumerating any video standards, see Video Standards.

__u32 memory   This field must be set by applications and/or drivers in accordance with the selected I/O method. See v4l2_memory
union m
  __u32 offset For the single-planar API and when memory is V4L2_MEMORY_MMAP this is the offset of the buffer from the start of the device memory. The value is returned by the driver and apart of serving as parameter to the mmap() function not useful for applications. See Streaming I/O (Memory Mapping) for details
  unsigned long userptr For the single-planar API and when memory is V4L2_MEMORY_USERPTR this is a pointer to the buffer (casted to unsigned long type) in virtual memory, set by the application. See Streaming I/O (User Pointers) for details.
  struct v4l2_plane *planes When using the multi-planar API, contains a userspace pointer to an array of struct v4l2_plane. The size of the array should be put in the length field of this struct v4l2_buffer structure.
  int fd For the single-plane API and when memory is V4L2_MEMORY_DMABUF this is the file descriptor associated with a DMABUF buffer.
__u32 length   Size of the buffer (not the payload) in bytes for the single-planar API. This is set by the driver based on the calls to ioctl VIDIOC_REQBUFS and/or ioctl VIDIOC_CREATE_BUFS. For the multi-planar API the application sets this to the number of elements in the planes array. The driver will fill in the actual number of valid elements in that array.
__u32 reserved2   A place holder for future extensions. Drivers and applications must set this to 0.
__u32 reserved   A place holder for future extensions. Drivers and applications must set this to 0.
v4l2_plane

3.6.2. struct v4l2_plane

__u32 bytesused  

The number of bytes occupied by data in the plane (its payload). Drivers must set this field when type refers to a capture stream, applications when it refers to an output stream. If the application sets this to 0 for an output stream, then bytesused will be set to the size of the plane (see the length field of this struct) by the driver.

Note

Note that the actual image data starts at data_offset which may not be 0.

__u32 length   Size in bytes of the plane (not its payload). This is set by the driver based on the calls to ioctl VIDIOC_REQBUFS and/or ioctl VIDIOC_CREATE_BUFS.
union m    
  __u32 mem_offset When the memory type in the containing struct v4l2_buffer is V4L2_MEMORY_MMAP, this is the value that should be passed to mmap(), similar to the offset field in struct v4l2_buffer.
  unsigned long userptr When the memory type in the containing struct v4l2_buffer is V4L2_MEMORY_USERPTR, this is a userspace pointer to the memory allocated for this plane by an application.
  int fd When the memory type in the containing struct v4l2_buffer is V4L2_MEMORY_DMABUF, this is a file descriptor associated with a DMABUF buffer, similar to the fd field in struct v4l2_buffer.
__u32 data_offset  

Offset in bytes to video data in the plane. Drivers must set this field when type refers to a capture stream, applications when it refers to an output stream.

Note

That data_offset is included in bytesused. So the size of the image in the plane is bytesused-data_offset at offset data_offset from the start of the plane.

__u32 reserved[11]   Reserved for future use. Should be zeroed by drivers and applications.
v4l2_buf_type

3.6.3. enum v4l2_buf_type

V4L2_BUF_TYPE_VIDEO_CAPTURE 1 Buffer of a single-planar video capture stream, see Video Capture Interface.
V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE 9 Buffer of a multi-planar video capture stream, see Video Capture Interface.
V4L2_BUF_TYPE_VIDEO_OUTPUT 2 Buffer of a single-planar video output stream, see Video Output Interface.
V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE 10 Buffer of a multi-planar video output stream, see Video Output Interface.
V4L2_BUF_TYPE_VIDEO_OVERLAY 3 Buffer for video overlay, see Video Overlay Interface.
V4L2_BUF_TYPE_VBI_CAPTURE 4 Buffer of a raw VBI capture stream, see Raw VBI Data Interface.
V4L2_BUF_TYPE_VBI_OUTPUT 5 Buffer of a raw VBI output stream, see Raw VBI Data Interface.
V4L2_BUF_TYPE_SLICED_VBI_CAPTURE 6 Buffer of a sliced VBI capture stream, see Sliced VBI Data Interface.
V4L2_BUF_TYPE_SLICED_VBI_OUTPUT 7 Buffer of a sliced VBI output stream, see Sliced VBI Data Interface.
V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY 8 Buffer for video output overlay (OSD), see Video Output Overlay Interface.
V4L2_BUF_TYPE_SDR_CAPTURE 11 Buffer for Software Defined Radio (SDR) capture stream, see Software Defined Radio Interface (SDR).
V4L2_BUF_TYPE_SDR_OUTPUT 12 Buffer for Software Defined Radio (SDR) output stream, see Software Defined Radio Interface (SDR).

3.6.4. Buffer Flags

V4L2_BUF_FLAG_MAPPED 0x00000001

The buffer resides in device memory and has been mapped into the application’s address space, see Streaming I/O (Memory Mapping) for details. Drivers set or clear this flag when the ioctl VIDIOC_QUERYBUF, ioctl VIDIOC_QBUF, VIDIOC_DQBUF or VIDIOC_DQBUF ioctl is called. Set by the driver.

V4L2_BUF_FLAG_QUEUED 0x00000002

Internally drivers maintain two buffer queues, an incoming and outgoing queue. When this flag is set, the buffer is currently on the incoming queue. It automatically moves to the outgoing queue after the buffer has been filled (capture devices) or displayed (output devices). Drivers set or clear this flag when the VIDIOC_QUERYBUF ioctl is called. After (successful) calling the VIDIOC_QBUFioctl it is always set and after VIDIOC_DQBUF always cleared.

V4L2_BUF_FLAG_DONE 0x00000004

When this flag is set, the buffer is currently on the outgoing queue, ready to be dequeued from the driver. Drivers set or clear this flag when the VIDIOC_QUERYBUF ioctl is called. After calling the VIDIOC_QBUF or VIDIOC_DQBUF it is always cleared. Of course a buffer cannot be on both queues at the same time, the V4L2_BUF_FLAG_QUEUED and V4L2_BUF_FLAG_DONE flag are mutually exclusive. They can be both cleared however, then the buffer is in “dequeued” state, in the application domain so to say.

V4L2_BUF_FLAG_ERROR 0x00000040

When this flag is set, the buffer has been dequeued successfully, although the data might have been corrupted. This is recoverable, streaming may continue as normal and the buffer may be reused normally. Drivers set this flag when the VIDIOC_DQBUF ioctl is called.

V4L2_BUF_FLAG_KEYFRAME 0x00000008

Drivers set or clear this flag when calling the VIDIOC_DQBUF ioctl. It may be set by video capture devices when the buffer contains a compressed image which is a key frame (or field), i. e. can be decompressed on its own. Also known as an I-frame. Applications can set this bit when type refers to an output stream.

V4L2_BUF_FLAG_PFRAME 0x00000010

Similar to V4L2_BUF_FLAG_KEYFRAME this flags predicted frames or fields which contain only differences to a previous key frame. Applications can set this bit when type refers to an output stream.

V4L2_BUF_FLAG_BFRAME 0x00000020

Similar to V4L2_BUF_FLAG_KEYFRAME this flags a bi-directional predicted frame or field which contains only the differences between the current frame and both the preceding and following key frames to specify its content. Applications can set this bit when type refers to an output stream.

V4L2_BUF_FLAG_TIMECODE 0x00000100

The timecode field is valid. Drivers set or clear this flag when the VIDIOC_DQBUF ioctl is called. Applications can set this bit and the corresponding timecode structure when type refers to an output stream.

V4L2_BUF_FLAG_PREPARED 0x00000400

The buffer has been prepared for I/O and can be queued by the application. Drivers set or clear this flag when the ioctl VIDIOC_QUERYBUF, VIDIOC_PREPARE_BUF, ioctl VIDIOC_QBUF, VIDIOC_DQBUF or VIDIOC_DQBUF ioctl is called.

V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x00000800

Caches do not have to be invalidated for this buffer. Typically applications shall use this flag if the data captured in the buffer is not going to be touched by the CPU, instead the buffer will, probably, be passed on to a DMA-capable hardware unit for further processing or output.

V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x00001000

Caches do not have to be cleaned for this buffer. Typically applications shall use this flag for output buffers if the data in this buffer has not been created by the CPU but by some DMA-capable unit, in which case caches have not been used.

V4L2_BUF_FLAG_LAST 0x00100000

Last buffer produced by the hardware. mem2mem codec drivers set this flag on the capture queue for the last buffer when the ioctl VIDIOC_QUERYBUF or VIDIOC_DQBUF ioctl is called. Due to hardware limitations, the last buffer may be empty. In this case the driver will set the bytesused field to 0, regardless of the format. Any Any subsequent call to the VIDIOC_DQBUF ioctl will not block anymore, but return an EPIPE error code.

V4L2_BUF_FLAG_TIMESTAMP_MASK 0x0000e000

Mask for timestamp types below. To test the timestamp type, mask out bits not belonging to timestamp type by performing a logical and operation with buffer flags and timestamp mask.

V4L2_BUF_FLAG_TIMESTAMP_UNKNOWN 0x00000000

Unknown timestamp type. This type is used by drivers before Linux 3.9 and may be either monotonic (see below) or realtime (wall clock). Monotonic clock has been favoured in embedded systems whereas most of the drivers use the realtime clock. Either kinds of timestamps are available in user space via clock_gettime() using clock IDs CLOCK_MONOTONIC and CLOCK_REALTIME, respectively.

V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC 0x00002000

The buffer timestamp has been taken from the CLOCK_MONOTONIC clock. To access the same clock outside V4L2, use clock_gettime().

V4L2_BUF_FLAG_TIMESTAMP_COPY 0x00004000

The CAPTURE buffer timestamp has been taken from the corresponding OUTPUT buffer. This flag applies only to mem2mem devices.

V4L2_BUF_FLAG_TSTAMP_SRC_MASK 0x00070000

Mask for timestamp sources below. The timestamp source defines the point of time the timestamp is taken in relation to the frame. Logical ‘and’ operation between the flags field and V4L2_BUF_FLAG_TSTAMP_SRC_MASK produces the value of the timestamp source. Applications must set the timestamp source when type refers to an output stream and V4L2_BUF_FLAG_TIMESTAMP_COPY is set.

V4L2_BUF_FLAG_TSTAMP_SRC_EOF 0x00000000

End Of Frame. The buffer timestamp has been taken when the last pixel of the frame has been received or the last pixel of the frame has been transmitted. In practice, software generated timestamps will typically be read from the clock a small amount of time after the last pixel has been received or transmitten, depending on the system and other activity in it.

V4L2_BUF_FLAG_TSTAMP_SRC_SOE 0x00010000

Start Of Exposure. The buffer timestamp has been taken when the exposure of the frame has begun. This is only valid for the V4L2_BUF_TYPE_VIDEO_CAPTURE buffer type.

v4l2_memory

3.6.5. enum v4l2_memory

V4L2_MEMORY_MMAP 1 The buffer is used for memory mapping I/O.
V4L2_MEMORY_USERPTR 2 The buffer is used for user pointer I/O.
V4L2_MEMORY_OVERLAY 3 [to do]
V4L2_MEMORY_DMABUF 4 The buffer is used for DMA shared buffer I/O.

3.6.6. Timecodes

The struct v4l2_timecode structure is designed to hold a SMPTE 12M or similar timecode. (struct struct timeval timestamps are stored in struct v4l2_buffer field timestamp.)

v4l2_timecode

3.6.6.1. struct v4l2_timecode

__u32 type Frame rate the timecodes are based on, see Timecode Types.
__u32 flags Timecode flags, see Timecode Flags.
__u8 frames Frame count, 0 ... 23/24/29/49/59, depending on the type of timecode.
__u8 seconds Seconds count, 0 ... 59. This is a binary, not BCD number.
__u8 minutes Minutes count, 0 ... 59. This is a binary, not BCD number.
__u8 hours Hours count, 0 ... 29. This is a binary, not BCD number.
__u8 userbits[4] The “user group” bits from the timecode.

3.6.6.2. Timecode Types

V4L2_TC_TYPE_24FPS 1 24 frames per second, i. e. film.
V4L2_TC_TYPE_25FPS 2 25 frames per second, i. e. PAL or SECAM video.
V4L2_TC_TYPE_30FPS 3 30 frames per second, i. e. NTSC video.
V4L2_TC_TYPE_50FPS 4  
V4L2_TC_TYPE_60FPS 5  

3.6.6.3. Timecode Flags

V4L2_TC_FLAG_DROPFRAME 0x0001 Indicates “drop frame” semantics for counting frames in 29.97 fps material. When set, frame numbers 0 and 1 at the start of each minute, except minutes 0, 10, 20, 30, 40, 50 are omitted from the count.
V4L2_TC_FLAG_COLORFRAME 0x0002 The “color frame” flag.
V4L2_TC_USERBITS_field 0x000C Field mask for the “binary group flags”.
V4L2_TC_USERBITS_USERDEFINED 0x0000 Unspecified format.
V4L2_TC_USERBITS_8BITCHARS 0x0008 8-bit ISO characters.