========================= Kernel Mode Setting (KMS) ========================= Drivers must initialize the mode setting core by calling :c:func:`drm_mode_config_init()` on the DRM device. The function initializes the :c:type:`struct drm_device ` mode_config field and never fails. Once done, mode configuration must be setup by initializing the following fields. - int min_width, min_height; int max_width, max_height; Minimum and maximum width and height of the frame buffers in pixel units. - struct drm_mode_config_funcs \*funcs; Mode setting functions. Mode Configuration KMS Core Structures and Functions ================================= .. kernel-doc:: drivers/gpu/drm/drm_mode_config.c :export: .. kernel-doc:: include/drm/drm_mode_config.h :internal: Modeset Base Object Abstraction =============================== .. kernel-doc:: include/drm/drm_mode_object.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_mode_object.c :export: Atomic Mode Setting Function Reference ====================================== .. kernel-doc:: drivers/gpu/drm/drm_atomic.c :export: .. kernel-doc:: include/drm/drm_atomic.h :internal: CRTC Abstraction ================ .. kernel-doc:: drivers/gpu/drm/drm_crtc.c :export: .. kernel-doc:: include/drm/drm_crtc.h :internal: Frame Buffer Abstraction ======================== .. kernel-doc:: drivers/gpu/drm/drm_framebuffer.c :doc: overview Frame Buffer Functions Reference -------------------------------- .. kernel-doc:: drivers/gpu/drm/drm_framebuffer.c :export: .. kernel-doc:: include/drm/drm_framebuffer.h :internal: DRM Format Handling =================== .. kernel-doc:: include/drm/drm_fourcc.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_fourcc.c :export: Dumb Buffer Objects =================== .. kernel-doc:: drivers/gpu/drm/drm_dumb_buffers.c :doc: overview Plane Abstraction ================= .. kernel-doc:: drivers/gpu/drm/drm_plane.c :doc: overview Plane Functions Reference ------------------------- .. kernel-doc:: include/drm/drm_plane.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_plane.c :export: Display Modes Function Reference ================================ .. kernel-doc:: include/drm/drm_modes.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_modes.c :export: Connector Abstraction ===================== .. kernel-doc:: drivers/gpu/drm/drm_connector.c :doc: overview Connector Functions Reference ----------------------------- .. kernel-doc:: include/drm/drm_connector.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_connector.c :export: Encoder Abstraction =================== .. kernel-doc:: drivers/gpu/drm/drm_encoder.c :doc: overview Encoder Functions Reference --------------------------- .. kernel-doc:: include/drm/drm_encoder.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_encoder.c :export: KMS Initialization and Cleanup ============================== A KMS device is abstracted and exposed as a set of planes, CRTCs, encoders and connectors. KMS drivers must thus create and initialize all those objects at load time after initializing mode setting. CRTCs (:c:type:`struct drm_crtc `) -------------------------------------------- A CRTC is an abstraction representing a part of the chip that contains a pointer to a scanout buffer. Therefore, the number of CRTCs available determines how many independent scanout buffers can be active at any given time. The CRTC structure contains several fields to support this: a pointer to some video memory (abstracted as a frame buffer object), a display mode, and an (x, y) offset into the video memory to support panning or configurations where one piece of video memory spans multiple CRTCs. CRTC Initialization ~~~~~~~~~~~~~~~~~~~ A KMS device must create and register at least one struct :c:type:`struct drm_crtc ` instance. The instance is allocated and zeroed by the driver, possibly as part of a larger structure, and registered with a call to :c:func:`drm_crtc_init()` with a pointer to CRTC functions. Cleanup ------- The DRM core manages its objects' lifetime. When an object is not needed anymore the core calls its destroy function, which must clean up and free every resource allocated for the object. Every :c:func:`drm_\*_init()` call must be matched with a corresponding :c:func:`drm_\*_cleanup()` call to cleanup CRTCs (:c:func:`drm_crtc_cleanup()`), planes (:c:func:`drm_plane_cleanup()`), encoders (:c:func:`drm_encoder_cleanup()`) and connectors (:c:func:`drm_connector_cleanup()`). Furthermore, connectors that have been added to sysfs must be removed by a call to :c:func:`drm_connector_unregister()` before calling :c:func:`drm_connector_cleanup()`. Connectors state change detection must be cleanup up with a call to :c:func:`drm_kms_helper_poll_fini()`. Output discovery and initialization example ------------------------------------------- .. code-block:: c void intel_crt_init(struct drm_device *dev) { struct drm_connector *connector; struct intel_output *intel_output; intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); if (!intel_output) return; connector = &intel_output->base; drm_connector_init(dev, &intel_output->base, &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA); drm_encoder_init(dev, &intel_output->enc, &intel_crt_enc_funcs, DRM_MODE_ENCODER_DAC); drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); /* Set up the DDC bus. */ intel_output->ddc_bus = intel_i2c_create(dev, GPIOA, "CRTDDC_A"); if (!intel_output->ddc_bus) { dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration " "failed.\n"); return; } intel_output->type = INTEL_OUTPUT_ANALOG; connector->interlace_allowed = 0; connector->doublescan_allowed = 0; drm_encoder_helper_add(&intel_output->enc, &intel_crt_helper_funcs); drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs); drm_connector_register(connector); } In the example above (taken from the i915 driver), a CRTC, connector and encoder combination is created. A device-specific i2c bus is also created for fetching EDID data and performing monitor detection. Once the process is complete, the new connector is registered with sysfs to make its properties available to applications. KMS Locking =========== .. kernel-doc:: drivers/gpu/drm/drm_modeset_lock.c :doc: kms locking .. kernel-doc:: include/drm/drm_modeset_lock.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_modeset_lock.c :export: KMS Properties ============== Property Types and Blob Property Support ---------------------------------------- .. kernel-doc:: drivers/gpu/drm/drm_property.c :doc: overview .. kernel-doc:: include/drm/drm_property.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_property.c :export: Standard Connector Properties ----------------------------- .. kernel-doc:: drivers/gpu/drm/drm_connector.c :doc: standard connector properties Plane Composition Properties ---------------------------- .. kernel-doc:: drivers/gpu/drm/drm_blend.c :doc: overview .. kernel-doc:: drivers/gpu/drm/drm_blend.c :export: Color Management Properties --------------------------- .. kernel-doc:: drivers/gpu/drm/drm_color_mgmt.c :doc: overview .. kernel-doc:: include/drm/drm_color_mgmt.h :internal: .. kernel-doc:: drivers/gpu/drm/drm_color_mgmt.c :export: Tile Group Property ------------------- .. kernel-doc:: drivers/gpu/drm/drm_connector.c :doc: Tile group Explicit Fencing Properties --------------------------- .. kernel-doc:: drivers/gpu/drm/drm_atomic.c :doc: explicit fencing properties Existing KMS Properties ----------------------- The following table gives description of drm properties exposed by various modules/drivers. .. csv-table:: :header-rows: 1 :file: kms-properties.csv Vertical Blanking ================= Vertical blanking plays a major role in graphics rendering. To achieve tear-free display, users must synchronize page flips and/or rendering to vertical blanking. The DRM API offers ioctls to perform page flips synchronized to vertical blanking and wait for vertical blanking. The DRM core handles most of the vertical blanking management logic, which involves filtering out spurious interrupts, keeping race-free blanking counters, coping with counter wrap-around and resets and keeping use counts. It relies on the driver to generate vertical blanking interrupts and optionally provide a hardware vertical blanking counter. Drivers must implement the following operations. - int (\*enable_vblank) (struct drm_device \*dev, int crtc); void (\*disable_vblank) (struct drm_device \*dev, int crtc); Enable or disable vertical blanking interrupts for the given CRTC. - u32 (\*get_vblank_counter) (struct drm_device \*dev, int crtc); Retrieve the value of the vertical blanking counter for the given CRTC. If the hardware maintains a vertical blanking counter its value should be returned. Otherwise drivers can use the :c:func:`drm_vblank_count()` helper function to handle this operation. Drivers must initialize the vertical blanking handling core with a call to :c:func:`drm_vblank_init()` in their load operation. Vertical blanking interrupts can be enabled by the DRM core or by drivers themselves (for instance to handle page flipping operations). The DRM core maintains a vertical blanking use count to ensure that the interrupts are not disabled while a user still needs them. To increment the use count, drivers call :c:func:`drm_vblank_get()`. Upon return vertical blanking interrupts are guaranteed to be enabled. To decrement the use count drivers call :c:func:`drm_vblank_put()`. Only when the use count drops to zero will the DRM core disable the vertical blanking interrupts after a delay by scheduling a timer. The delay is accessible through the vblankoffdelay module parameter or the ``drm_vblank_offdelay`` global variable and expressed in milliseconds. Its default value is 5000 ms. Zero means never disable, and a negative value means disable immediately. Drivers may override the behaviour by setting the :c:type:`struct drm_device ` vblank_disable_immediate flag, which when set causes vblank interrupts to be disabled immediately regardless of the drm_vblank_offdelay value. The flag should only be set if there's a properly working hardware vblank counter present. When a vertical blanking interrupt occurs drivers only need to call the :c:func:`drm_handle_vblank()` function to account for the interrupt. Resources allocated by :c:func:`drm_vblank_init()` must be freed with a call to :c:func:`drm_vblank_cleanup()` in the driver unload operation handler. Vertical Blanking and Interrupt Handling Functions Reference ------------------------------------------------------------ .. kernel-doc:: drivers/gpu/drm/drm_irq.c :export: .. kernel-doc:: include/drm/drm_irq.h :internal: