Kernel driver pxe1610

Supported chips:

  • Infineon PXE1610

    Prefix: 'pxe1610'

    Addresses scanned: -

    Datasheet: Datasheet is not publicly available.

  • Infineon PXE1110

    Prefix: 'pxe1110'

    Addresses scanned: -

    Datasheet: Datasheet is not publicly available.

  • Infineon PXM1310

    Prefix: 'pxm1310'

    Addresses scanned: -

    Datasheet: Datasheet is not publicly available.

Author: Vijay Khemka <vijaykhemka@fb.com>

Description

PXE1610/PXE1110 are Multi-rail/Multiphase Digital Controllers and compliant to

  • Intel VR13 DC-DC converter specifications.

  • Intel SVID protocol.

Used for Vcore power regulation for Intel VR13 based microprocessors

  • Servers, Workstations, and High-end desktops

PXM1310 is a Multi-rail Controller and it is compliant to

  • Intel VR13 DC-DC converter specifications.

  • Intel SVID protocol.

Used for DDR3/DDR4 Memory power regulation for Intel VR13 and IMVP8 based systems

Usage Notes

This driver does not probe for PMBus devices. You will have to instantiate devices explicitly.

Example: the following commands will load the driver for an PXE1610 at address 0x70 on I2C bus #4:

# modprobe pxe1610
# echo pxe1610 0x70 > /sys/bus/i2c/devices/i2c-4/new_device

It can also be instantiated by declaring in device tree

Sysfs attributes

curr1_label

"iin"

curr1_input

Measured input current

curr1_alarm

Current high alarm

curr[2-4]_label

"iout[1-3]"

curr[2-4]_input

Measured output current

curr[2-4]_crit

Critical maximum current

curr[2-4]_crit_alarm

Current critical high alarm

in1_label

"vin"

in1_input

Measured input voltage

in1_crit

Critical maximum input voltage

in1_crit_alarm

Input voltage critical high alarm

in[2-4]_label

"vout[1-3]"

in[2-4]_input

Measured output voltage

in[2-4]_lcrit

Critical minimum output voltage

in[2-4]_lcrit_alarm

Output voltage critical low alarm

in[2-4]_crit

Critical maximum output voltage

in[2-4]_crit_alarm

Output voltage critical high alarm

power1_label

"pin"

power1_input

Measured input power

power1_alarm

Input power high alarm

power[2-4]_label

"pout[1-3]"

power[2-4]_input

Measured output power

temp[1-3]_input

Measured temperature

temp[1-3]_crit

Critical high temperature

temp[1-3]_crit_alarm

Chip temperature critical high alarm

temp[1-3]_max

Maximum temperature

temp[1-3]_max_alarm

Chip temperature high alarm