Kernel driver ina238¶
Supported chips:
Texas Instruments INA238
Prefix: ‘ina238’
Addresses: I2C 0x40 - 0x4f
- Datasheet:
Silergy SQ52206
Prefix: ‘SQ52206’
Addresses: I2C 0x40 - 0x4f
Author: Nathan Rossi <nathan.rossi@digi.com>
Description¶
The INA238 is a current shunt, power and temperature monitor with an I2C interface. It includes a number of programmable functions including alerts, conversion rate, sample averaging and selectable shunt voltage accuracy.
The shunt value in micro-ohms can be set via platform data or device tree at compile-time or via the shunt_resistor attribute in sysfs at run-time. Please refer to the Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml for bindings if the device tree is used.
Sysfs entries¶
in0_input |
Shunt voltage (mV) |
in0_min |
Minimum shunt voltage threshold (mV) |
in0_min_alarm |
Minimum shunt voltage alarm |
in0_max |
Maximum shunt voltage threshold (mV) |
in0_max_alarm |
Maximum shunt voltage alarm |
in1_input |
Bus voltage (mV) |
in1_min |
Minimum bus voltage threshold (mV) |
in1_min_alarm |
Minimum shunt voltage alarm |
in1_max |
Maximum bus voltage threshold (mV) |
in1_max_alarm |
Maximum shunt voltage alarm |
power1_input |
Power measurement (uW) |
power1_max |
Maximum power threshold (uW) |
power1_max_alarm |
Maximum power alarm |
curr1_input |
Current measurement (mA) |
temp1_input |
Die temperature measurement (mC) |
temp1_max |
Maximum die temperature threshold (mC) |
temp1_max_alarm |
Maximum die temperature alarm |
Additional sysfs entries for sq52206¶
energy1_input |
Energy measurement (mJ) |
power1_input_highest |
Peak Power (uW) |