Kernel driver max34440 ====================== Supported chips: * ADI ADPM12160 Prefixes: 'adpm12160' Addresses scanned: - Datasheet: - * Maxim MAX34440 Prefixes: 'max34440' Addresses scanned: - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34440.pdf * Maxim MAX34441 PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller Prefixes: 'max34441' Addresses scanned: - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34441.pdf * Maxim MAX34446 PMBus Power-Supply Data Logger Prefixes: 'max34446' Addresses scanned: - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34446.pdf * Maxim MAX34451 PMBus 16-Channel V/I Monitor and 12-Channel Sequencer/Marginer Prefixes: 'max34451' Addresses scanned: - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34451.pdf * Maxim MAX34460 PMBus 12-Channel Voltage Monitor & Sequencer Prefix: 'max34460' Addresses scanned: - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34460.pdf * Maxim MAX34461 PMBus 16-Channel Voltage Monitor & Sequencer Prefix: 'max34461' Addresses scanned: - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34461.pdf Author: Guenter Roeck Description ----------- This driver supports multiple devices: hardware monitoring for Maxim MAX34440 PMBus 6-Channel Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger; PMBus Voltage Monitor and Sequencers for MAX34451, MAX34460, and MAX34461; PMBus DC/DC Power Module ADPM12160. The MAX34451 supports monitoring voltage or current of 12 channels based on GIN pins. The MAX34460 supports 12 voltage channels, and the MAX34461 supports 16 voltage channels. The ADPM1260 also monitors both input and output of voltage and current. The driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes ----------- This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for details. For MAX34446, the value of the currX_crit attribute determines if current or voltage measurement is enabled for a given channel. Voltage measurement is enabled if currX_crit is set to 0; current measurement is enabled if the attribute is set to a positive value. Power measurement is only enabled if channel 1 (3) is configured for voltage measurement, and channel 2 (4) is configured for current measurement. Platform data support --------------------- The driver supports standard PMBus driver platform data. Sysfs entries ------------- The following attributes are supported. Limits are read-write; all other attributes are read-only. In ~~ ======================= ======================================================= in[1-6]_label "vout[1-6]". in[1-6]_input Measured voltage. From READ_VOUT register. in[1-6]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[1-6]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. in[1-6]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. in[1-6]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. in[1-6]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[1-6]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. in[1-6]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. in[1-6]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. in[1-6]_lowest Historical minimum voltage. in[1-6]_highest Historical maximum voltage. in[1-6]_reset_history Write any value to reset history. ======================= ======================================================= .. note:: - MAX34446 only supports in[1-4]. - ADPM12160 only supports in[1-2]. Label is "vin1" and "vout1" respectively. Curr ~~~~ ======================= ======================================================== curr[1-6]_label "iout[1-6]". curr[1-6]_input Measured current. From READ_IOUT register. curr[1-6]_max Maximum current. From IOUT_OC_WARN_LIMIT register. curr[1-6]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. curr[1-6]_max_alarm Current high alarm. From IOUT_OC_WARNING status. curr[1-6]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. curr[1-4]_average Historical average current (MAX34446/34451 only). curr[1-6]_highest Historical maximum current. curr[1-6]_reset_history Write any value to reset history. ======================= ======================================================== .. note:: - in6 and curr6 attributes only exist for MAX34440. - MAX34446 only supports curr[1-4]. - For ADPM12160, curr[1] is "iin1" and curr[2-6] are "iout[1-5]. Power ~~~~~ ======================= ======================================================== power[1,3]_label "pout[1,3]" power[1,3]_input Measured power. power[1,3]_average Historical average power. power[1,3]_highest Historical maximum power. ======================= ======================================================== .. note:: Power attributes only exist for MAX34446. Temp ~~~~ ======================= ======================================================== temp[1-8]_input Measured temperatures. From READ_TEMPERATURE_1 register. temp1 is the chip's internal temperature. temp2..temp5 are remote I2C temperature sensors. For MAX34441, temp6 is a remote thermal-diode sensor. For MAX34440, temp6..8 are remote I2C temperature sensors. temp[1-8]_max Maximum temperature. From OT_WARN_LIMIT register. temp[1-8]_crit Critical high temperature. From OT_FAULT_LIMIT register. temp[1-8]_max_alarm Temperature high alarm. temp[1-8]_crit_alarm Temperature critical high alarm. temp[1-8]_average Historical average temperature (MAX34446 only). temp[1-8]_highest Historical maximum temperature. temp[1-8]_reset_history Write any value to reset history. ======================= ======================================================== .. note:: - temp7 and temp8 attributes only exist for MAX34440. - MAX34446 only supports temp[1-3]. - ADPM12160 only supports temp[1]. .. note:: - MAX34451 supports attribute groups in[1-16] (or curr[1-16] based on input pins) and temp[1-5]. - MAX34460 supports attribute groups in[1-12] and temp[1-5]. - MAX34461 supports attribute groups in[1-16] and temp[1-5].