The proc/net/tcp and proc/net/tcp6 variables

This document describes the interfaces /proc/net/tcp and /proc/net/tcp6. Note that these interfaces are deprecated in favor of tcp_diag.

These /proc interfaces provide information about currently active TCP connections, and are implemented by tcp4_seq_show() in net/ipv4/tcp_ipv4.c and tcp6_seq_show() in net/ipv6/tcp_ipv6.c, respectively.

It will first list all listening TCP sockets, and next list all established TCP connections. A typical entry of /proc/net/tcp would look like this (split up into 3 parts because of the length of the line):

46: 010310AC:9C4C 030310AC:1770 01
|      |      |      |      |   |--> connection state
|      |      |      |      |------> remote TCP port number
|      |      |      |-------------> remote IPv4 address
|      |      |--------------------> local TCP port number
|      |---------------------------> local IPv4 address
|----------------------------------> number of entry

00000150:00000000 01:00000019 00000000
   |        |     |     |       |--> number of unrecovered RTO timeouts
   |        |     |     |----------> number of jiffies until timer expires
   |        |     |----------------> timer_active (see below)
   |        |----------------------> receive-queue
   |-------------------------------> transmit-queue

1000        0 54165785 4 cd1e6040 25 4 27 3 -1
 |          |    |     |    |     |  | |  | |--> slow start size threshold,
 |          |    |     |    |     |  | |  |      or -1 if the threshold
 |          |    |     |    |     |  | |  |      is >= 0xFFFF
 |          |    |     |    |     |  | |  |----> sending congestion window
 |          |    |     |    |     |  | |-------> (ack.quick<<1)|ack.pingpong
 |          |    |     |    |     |  |---------> Predicted tick of soft clock
 |          |    |     |    |     |              (delayed ACK control data)
 |          |    |     |    |     |------------> retransmit timeout
 |          |    |     |    |------------------> location of socket in memory
 |          |    |     |-----------------------> socket reference count
 |          |    |-----------------------------> inode
 |          |----------------------------------> unanswered 0-window probes
 |---------------------------------------------> uid

timer_active:

0

no timer is pending

1

retransmit-timer is pending

2

another timer (e.g. delayed ack or keepalive) is pending

3

this is a socket in TIME_WAIT state. Not all fields will contain data (or even exist)

4

zero window probe timer is pending