Kernel driver ics932s401¶
Addresses scanned: I2C 0x69
Datasheet: Publicly available at the IDT website
Author: Darrick J. Wong
This driver implements support for the IDT ICS932S401 chip family.
This chip has 4 clock outputs–a base clock for the CPU (which is likely multiplied to get the real CPU clock), a system clock, a PCI clock, a USB clock, and a reference clock. The driver reports selected and actual frequency. If spread spectrum mode is enabled, the driver also reports by what percent the clock signal is being spread, which should be between 0 and -0.5%. All frequencies are reported in KHz.
The ICS932S401 monitors all inputs continuously. The driver will not read the registers more often than once every other second.
The clocks could be reprogrammed to increase system speed. I will not help you do this, as you risk damaging your system!