Kernel driver i2c-sis630

Supported adapters:
  • Silicon Integrated Systems Corp (SiS)

    630 chipset (Datasheet: available at http://www.sfr-fresh.com/linux) 730 chipset 964 chipset

  • Possible other SiS chipsets ?

Author:

Module Parameters

force = [1|0]

Forcibly enable the SIS630. DANGEROUS! This can be interesting for chipsets not named above to check if it works for you chipset, but DANGEROUS!

high_clock = [1|0]

Forcibly set Host Master Clock to 56KHz (default, what your BIOS use). DANGEROUS! This should be a bit faster, but freeze some systems (i.e. my Laptop). SIS630/730 chip only.

Description

This SMBus only driver is known to work on motherboards with the above named chipsets.

If you see something like this:

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 31)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513

or like this:

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 730 Host (rev 02)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513

or like this:

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 02)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO]
                                                      LPC Controller (rev 36)

in your lspci output , then this driver is for your chipset.

Thank You

Philip Edelbrock <phil@netroedge.com> - testing SiS730 support Mark M. Hoffman <mhoffman@lightlink.com> - bug fixes

To anyone else which I forgot here ;), thanks!